ODN Solution Introduction

Content
1 ODN Overview

2 Huawei ODN Fast Connection Solution

3 Key Features

1
ODN Architecture
ODN is the optical distribution network between OLT and ONT, it is the part of FTTx network

ONT

OLT
Central Office Feeder Section Distribution Section Drop Section

CO Feeder Distributio Drop

ODF Closure n FDB
WDM FDT FAT ATB
Closure
2
Closure Overview
Closure is normally used to connect optical cables in the long-
distance transmission network, closure also routes and branches
optical fibers.
Fiber to the home (FTTH) is a type of point to multiple points
(P2MP) network with many branching points, so closures are
widely used to implement cable distribution, optical fiber splitting,
and flat drop cable output.
closure function

Splicing connection

splitting

Straight-through

Branching (splicing)
Closure Branching (distribution)

3
Network Location of Closure

FDT: User
Support Aerial cable Closure in pole
splitting

ODF

Duct /buried cable closure in manhole Closure: Support splitting

or hand hole
CO Feeder cable Distribution cable/drop cable

The user access point is also a level-two splitting point. The closure should have the function of
splitting, distribution, and outputting the drop cables.

Branching point in a community: Optical cables are distributed to each building or area.
Therefore, branching holes in the closure must be sufficient.
4
 FDT Overview
Overview
The fiber distribution terminal (FDT) is a device for connecting feeder cables and distribution cables,
to protect optical fiber splicing points, distribute and schedule optical fiber routings. FDT are often
outdoor type.
FDT is called fiber distribution hub (FDH) in North America, street cabinet in Europe, and optical
distribution cabinet (ODC) in Middle East.

5
 Huawei FDT
Splicing and distribution tray
Modular design. The splicing tray and splicing
and distribution tray are installed in modules.
Optical splitter
Parking Zone
Effectively manage unused optical fibers, protect connectors of
unused optical fibers, and reduce accidental damage rates of optical fibers
Splicing tray
Can be installed with the
The top of the FDT sunshade to prevent operators
uses gradient design from sunlight.
and is waterproof.
Huawei
FDT Provides operation
platform`, which
facilitates splicing.

The lock hole is hidden Self-lock structure, prevent

under the protection cover optical fibers from being
and the door can only be damaged by pull out
opened by using dedicated splicing tray forcibly.
tools.
6
 FAT Overview
Overview

Fiber access terminal (FAT) is normally located at the user access point to connect distribution
cables and drop cables. In FTTx network, FAT work with the optical splitter to split optical fibers.
FAT is called fiber distribution hub (FDH) in North America, floor box in Europe, floor distributor (FD)
in the Asia Pacific zone, and optical distribution box (ODP) in Middle East.

7
Full Series of Product meet different scenarios

Scenario Installation
Installed on a pole
High buildings
Middle and Installed on a wall
low buildings

FAT

Capacity Function
6 core Optical splitting
12 core Direct splicing
18 core Distribution
24 core Straight-through
36 core

8
 ATB Overview
Overview

The access terminal box (ATB). Its major functions are terminated drop cables and providing optical ports.
ATB is the home equipment of FTTH, despite having the functions of the optical fiber panel, ATB also
should be beautiful,

ATB Position in the ODN

9
Huawei State-of-the-art Designed ATB
State of the art design
Rotatable plate make sure the patch cord
cannot be pulled out by accident
The Red Dot Award, which is origined in
Germany, is known as the Oscar Award in
the industry design.

Small size covers 1 to 4 cores:

Support wall mounted scenario or wall
embedded scenario;
Capacity with 1/2/4 cores

ONT port
Innovative design:
Compact box with ONT integration
Layered design makes operation easier.
Wall mounted and without visible ventilation
holes

10
Content
1 ODN Overview

2 Huawei ODN Fast Connection Solution

3 Key Features

11
The Biggest Challenges in building cabling
Slow Deployment Home Wiring is Difficult

On site install Vertical cabling Limited space Hard for home cabling Splicing at home

Low efficiency in fiber splicing and equipment Home wiring takes half of ODN investment. (50%56%
installation on site. (STC: 10 persons/day for one of FTTH)
FDT(576 core) ) Difficult to get the permission to enter the home.
Hard to do cabling inside buildings. (Old buildings, Several times to finish the indoor engineering. (6 hours
congested ducts) .(TdE) needed in Malaysia Maxis).
Low efficiency in service provisioning.(TdE: Need Dirt and long interruption in users house for splicing.(2
10 days/per user) hours in Telefonica)

12
 Different Scenarios

High Residential Building Low Residential Building

Villa or Single Dwelling Unit
(with duct inside) (w/o duct inside)
13
Scenario 2 : High Building
Riser cable
Scenario High density of subscribers,
Shaft
description uncertain take up rate

FDB Several entrance/unit in a building

More than 6 floors(6 to 30 floor)
4 or 6 household per floor of one unit
ducts inside and with enough space
FDB

FDB Inside solution needed

Technical
requirements Series of boxes with different capacity
2 level splitter in FDB
Better small in size
Easy operation and maintain
Beautiful, state of the art box
1 level splitter in FAT
Better support PAYG (pay as you go)

14
Pre-connected Indoor FDB -- Deployed with Subscriber growing
Compact design with full
Splicing Tray For 1 subscriber only Splitter module Cover functionality: splicing, splitting and
distribution
Small size (142x145x56mm) which
allows installation within small
spaces
Absolutely modular design allows
PAYG deployment

Day 1 1 splicing and 1 core for 1

Combination
subscriber
8 ports FDB Drop Cable
Day 2 1:4 splitters for less than 4
subscribers
Day 3 replace with 1:8 splitter as
subscriber grows, and the
existing 1:4 splitter can be
used in other places

15
Scenario 2 : Old Residential Building

Scenario Several entrance/unit in a building

description Normally less than 6 floors
4 or 5 household per floor of one unit
Drop cable
with no ducts inside or w/o space
inside the ducts
Inside cabling is impossible

Outside solution
Technical
needed(IP65,IP68)
requirements
Drop cable should be strong
FAT enough
All scenarios needed(pole , wall
Big capacity to cover as many as
subscribers
Closure in Beautiful, state of the art box
manhole
16
Pre-connected outdoor FAT
Design
Small Size (360x240x120mm)
Multi Function design (Splice, splitting, drop
distribution)
Splitting 1:4/1:8 //1:16 inside
Sealing Rate: IP65
Plug & Play with SC/APC outdoor Connectors

Wall mounted Pole mounted

Pre-connected Drop Cable

Plug & Play with SC/APC outdoor adapters
Messenger wiring

17
 Pre-connected Drop Cable for Easy and Fast Connection
dust cap for connector

IP68 outdoor connector

(to customer)

SC connector
(from splitter)

Design Plug & play / Easy to install 1 2 3

Outdoor protection rate: IP68

18
Scenario 3 : Villa or Residential Building
Scenario description

Low density area

Apartments along the road
Sometimes no duct along the road
Always with poles
All scenarios needed

Technical requirements
Outside solution needed(IP65,IP68)
Drop cable should be strong enough
All scenarios needed(pole , wall ,
manhole)
Better to use aerial solution
Full series of boxes, small in size
Beautiful, state of the art box

19
Aerial Solutions For Houses & Small Buildings
FAT

Pole-mounted Distribution
Box Cable
SPL 1:8 Pole-mounted
Box

Drop Cable

Pre-connected Drop Cable

Feeder Cable

External
Study Room Bed Room
drop cable
Pole-mounted
Box
Drop Cable
Closure
SPL 1:8
T ATB ONT
B
Distribution
Living Room
Cable
Indoor
drop cable
Closures
20
 Pre-connected Closure - SSC2133T
Pole/wire mounted , easy installation
Mechanical sealed, easy O&M
Special strain-relief design for drop cable
protection
Support flat drop cable(2x3mm,2x5mm) or
common optical cable(7.0mm20mm)
Composite PP+GF material with longer
service life
Comply with ROHS and UL94HB

SSC2133T-Product Specifications
Dimension(HxWxD) 337 x 208 x 120 mm Color black
Split Ratio 1:4/1:8/1:16 Working temperature 40+60
Max. Quantity of Splitter 2 Storage temperature 40+70
No. of subscriber ports 16 Humidity (RH) 93%+40
Splicing Capacity 24 Messenger Wire diameter (mm) 510
Common cable hole
7.0mm20mm Air pressure (Kappa) 70106
diameter
Drop cable 2x3mm Fireproof level UL94 HB
Installation Aerial Protection class IP54

21
Content
1 ODN Overview

2 Huawei ODN Fast Connection Solution

3 Key Features

22
 Huawei ODN Product Design
Stable & Reliable Economic and Cost effective

Proven quality of material, Wider coverage in home pass, while

infrastructure for 25+ years careful in home connection(PAYG)
Splicing on OSP, centralized splicing Modular design to enable step by
is cost effective but reliable step investment
Less splicing in last drop

Flexible in Expansion Easy and Fast to Deploy

Modular design, easy to Less splicing to save time

expand Better tools free, enable massive
Plug & play in last drop, easy deployment
Home Connection Better skilled technician free
Pre-connected drop cables Compact and small, easy to install
can be used as much as
possible
23
Splicing VS Pre-connected
Time decreasing

35 min 6 min
Splicing Pre-connectorized TCO Saving

Tools free 15%

None

Expertise decline
Splicing Pre-connected

Skilled worker Unskilled worker

24
End-to-End Products
ODF Closure FDT FAT FDB CTB/ATB

CTB2101
Pre-connected FAT FDB for splicing
SSC2101-FM
FDT2106D-288/576

ODF2115

ODF Module SSC2133T Multi-carrier indoor FAT FDB for distribution

ATB3201
FDT2103D-144/72

ODF Module FAT2123ST Mini FDB

25
 Global FTTx-ODN Applications
Telefonica,FT,TI,BT, Turkmen telecom, SOL, China Telecom, China
ME STC, ET,Q.NBN, ITPC
EU SFR,DT CIS Rostelecom China Unicom, China Mobile
NA DU, Qtel

Selected by 60 Operators(Telefonica,
BT, FT, Etisalat, STC etc).
National band Network project in
Qatar, New ZealandMalaysia and
Cameroon.

TelBruMoratelMNC Totalplay, Claro, CNT

MTN, Camtel, VDF, ZAP
TOTTrip-T Africa Media , FT(Orange, Safricom SA SingTelGlobe,TelBru LA Telefonica,Telmex,Entel
ESA
MoratelMNCPLDT CanTVAxtel
Maxis

26
 HUAWEI ENTERPRISE ICT SOLUTIONS A BETTER WAY

Copyright2012 Huawei Technologies Co., Ltd. All Rights Reserved.

The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product
portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive
statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time
without notice.