Dial Indicators

Comparison measuring instruments which ensure high quality, high accuracy and reliability.

Dial Indicators
Feature icons
Mitutoyos dial indicators have long been used by many of our customers. In full recognition of their Icon Feature description
needs, we have devoted ourselves to the research and development necessary to produce high-quality and Continuous scale
high-accuracy dial indicators. Due to the recent re-acknowledgement of the importance of measurement 90 0 10
technologies, the demands on dial indicators are many and varied: installation in measuring jigs, mounting
in countless types of precision equipment, etc. We offer numerous models with various types of dial faces, Balanced scale
measuring ranges, graduation styles and environmental resistance ratings. The stems, which ensure the 10 0 10
fixture reliability, and the spindles, which are the basis of accuracy, have excellent resistance against hard
use thanks to the hardened stainless steel construction. 0.01mm resolution dial indicators have a grand Reverse reading type,
gear made of stainless steel with high resistance to wear and deformation. 0.001mm graduation dial Suitable for depth and step
measurement.
indicators employ a sector gear made of a special alloy in order to further increase the resistance to wear.
S-type dial indicators employ an O-ring to ensure the air tightness between the outer frame and the crystal One revolution type for easy
case in order to prevent water or oil penetration. and error-free reading
Important factors in choosing a dial indicator: the size (bezel diameter), resolution (graduation) and
measuring range. Use the table on the right to help choose a suitable model for your application. Double scale spacing type,
easy-on-the-eyes

Shockproof

Waterproof (IP63)
63

Waterproof (IP64)
Limit hand
Bezel clamp 64

With damper at lowest rest

Dial face point
Serial No.
Order No.
Jeweled bearing

Peak retaining
Stem

Dustproof
Spindle (or Plunger)

Contact point
With coaxial revolution
counter

Parts of a dial indicator Back plunger

Adjustable hand

*Mitutoyo produces ASME-compatible products.

Contact us for details.

F-19 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 FEATURES: S Series (Series 2, 3, 4)

stem

Spindle
stem-bush

No through screw-holes on the frame for Revolutionary stem-bush design for trouble-
high oil- and dust-resistance. The bezel free stem clamping (longer clamping range;
clamp can be attached either to the right or maximum tightening torque at the clamping
left side. point with M5 screw: 150N-cm).
Improved Impact- and oil-resistant materials
are employed in the outer frame. Easier
reading is due to the improved shape of the
crystal face.

Limit markers (1) can be

(1) (2)
moved without interfering
with the clamp (2).

The spindle lifting lever (optional: 21AZB149)

can be attached to either the right or left
side providing high operability and smooth
movement. This lever can be easily installed
and removed without tools.

Greater rigidity in the bearing plate for reduced

retrace error (20%) and 4-screw mounting for
increased impact resistance.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-20
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 2 Standard Type, 0.01mm Graduation

Standard 0.01mm graduation dial gages The spindle is made of high-strength quench-
having a bezel with an outside diameter of hardened stainless steel suitable for heavy-
57mm. All types come with limit markers and duty use.
a bezel clamp as standard. A carbide contact point is used.
The bezel clamp and lifting lever (optional) The grand gear is made of stainless steel with
can be attached to either the right or left high resistance to wear and deformation.
side. These parts can be easily installed and Application of a hard coating on the surface
removed without tools. of the crystal makes the gage highly scratch-
Secure adhesion between the bezel and and chemical-resistant.
crystal as well as the use of an O-ring
prevents water or oil penetration.
90 0 10 Continuous scale 10 0 10 Balanced scale

Graduation: 0.01mm, 2046S Graduation: 0.01mm, 2047S

Measuring range: 10mm 2046S-09 Measuring range: 10mm
Shockproof type

Reverse reading type. Suitable 90 0 10 Continuous scale

for depth and step measurement.
2046S

Graduation: 0.01mm, 2902S Graduation: 0.01mm, 2310S-10

Measuring range: 10mm Measuring range: 10mm With coaxial revolution counter
Jeweled bearing type

90 0 10 Continuous scale 10 0 10 Balanced scale

F Graduation: 0.01mm, 2044S Graduation: 0.01mm, 2045S

Measuring range: 5mm 2044S-09 Measuring range: 5mm
Shockproof

F-21 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS

ISO/JIS Unit: mm
Type D E

10
6.5 5
12.
5

30

30
C

H
16
38.
5

B
8 0.009
0

F
G 4.8

M2.50.45
I

Note 1: Dimensions of the inch (ANSI/AGD Type) dial

indicator partly differ from those of the metric (ISO/
JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided
with a stem of 3/8" dia. and #4-48UNF thread
mount for the contact point.

Order No. A B C D E F G H I
2046S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2046S-09 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2047S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2902S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2310S-10 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2044S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2044S-09 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2045S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6

FEATURES SPECIFICATIONS
Metric Metric ISO/JIS type
Order No. Order No. Range Accuracy Repeat- Dial Measuring
90 0 10 10 0 10 64 Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force
2046S 2046SB 4 2046S 2046SB 0.01mm 10mm (1mm) 13m 3m 5m 10m 3m 0-100 1.4N or less
2046S-09 2046SB-09 4 4 2046S-09 2046SB-09 0.01mm 10mm (1mm) 15m 3m 5m 10m 3m 0-100 1.4N or less
2047S 2047SB 4 2047S 2047SB 0.01mm 10mm (1mm) 13m 3m 5m 10m 3m 0-50-0 1.4N or less
2902S 2902SB 4 4 2902S 2902SB 0.01mm 10mm (1mm) 13m 3m 5m 10m 3m 100-0 1.4N or less
2310S-10 2310SB-10 4 4 4 2310S-10 2310SB-10 0.01mm 10mm (1mm) 15m 3m 5m 10m 3m 0-100 1.4N or less
2044S 2044SB 4 2044S 2044SB 0.01mm 5mm (1mm) 12m 3m 5m 10m 3m 0-100 1.4N or less
2044S-09 2044SB-09 4 4 2044S-09 2044SB-09 0.01mm 5mm (1mm) 12m 3m 5m 10m 3m 0-100 1.4N or less
2045S 2045SB 4 2045S 2045SB 0.01mm 5mm (1mm) 12m 3m 5m 10m 3m 0-50-0 1.4N or less

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-22
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 2 Standard Type, 0.001mm & 0.005mm Graduation

Standard 0.001mm and 0.005mm graduation The spindle is made of high-strength quench-
dial indicators having a bezel with an outside hardened stainless steel which resists arduous use.
diameter of 57mm. All types come with A carbide contact point is used.
limit markers and a bezel clamp. A special alloy is used for the sector gears to
The outer clamp and lifting lever (optional) provide improved wear resistance.
can be attached to either the right or left The indicator uses jeweled bearings,
side. These parts can be easily installed and providing excellent indication sensitivity and
removed without tools. durability.
Secure adhesion between the bezel and Application of a hard coating on the surface
crystal as well as the use of an O-ring of the crystal makes the gauge highly
prevents water or oil penetration. scratch- and chemical-resistant.

10 0 10 Balanced scale 90 0 10 Continuous scale 10 0 10 Balanced scale

Graduation: 0.001mm, 2109S-10 Graduation: 0.001mm, 2110S-10 Graduation: 0.001mm, 2113S-10

Measuring range: 1mm Shockproof type Measuring range: 1mm Double scale Measuring range: 2mm Shockproof type
spacing type
Jeweled bearing Jeweled bearing
2109S-10 type Shockproof type type
Jeweled bearing
type

90 0 10 Continuous scale 10 0 10 Balanced scale 90 0 10 Continuous scale

Graduation: 0.001mm, 2118S-10 Graduation: 0.001mm, 2119S-10 Graduation: 0.005mm, 2124S-10

Measuring range: 5mm Jeweled bearing Measuring range: 5mm Jeweled bearing Measuring range: 5mm Jeweled bearing

F-23 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS

ISO/JIS Unit: mm
Type
D E

10
6.5 5
12.
5

30

30
C

16
H
38.
5

B
80.009
0

F
4.8
G

M2.50.45

Note 1: Dimensions of the inch (ANSI/AGD Type) dial

indicator partly differ from those of the metric (ISO/
JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided
with a stem of 3/8" dia. and #4-48UNF thread
mount for the contact point.

Order No. A B C D E F G H I
2109S-10 48.8 60.5 57 17.7 20 16.9 15.1 52 7.6
2110S-10 48.8 66.5 57 17.7 20 16.9 21.1 52 7.6
2113S-10 48.8 61 57 17.7 20 16.9 15.6 52 7.6
2118S-10 48.8 60.3 57 17.7 20 16.9 14.9 52 7.6
2119S-10 48.8 60.3 57 17.7 20 16.9 14.9 52 7.6
2124S-10 48.8 60.3 57 17.7 20 16.9 14.9 52 7.6

FEATURES SPECIFICATIONS
Metric Metric ISO/JIS type
Order No. Order No. Range Accuracy Repeat- Dial Measuring
90 0 10 10 0 10 64 Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force
2109S-10 2109SB-10 4 4 4 2109S-10 2109SB-10 0.001mm 1mm (0.2mm) 5m 2m 2m 4m 0.5m 0-100-0 1.5N or less
2110S-10 2110SB-10 4 4 4 4 2110S-10 2110SB-10 0.001mm 1mm (0.1mm) 5m 2m 2m 4m 0.5m 0-100 1.5N or less
2113S-10 2113SB-10 4 4 4 2113S-10 2113SB-10 0.001mm 2mm (0.2mm) 7m 2m 2m 5m 0.5m 0-100-0 1.5N or less
2118S-10 2118SB-10 4 4 2118S-10 2118SB-10 0.001mm 5mm (0.2mm) 10m 3m 3.5m 6m 1m 0-100-100 1.5N or less
2119S-10 2119SB-10 4 4 2119S-10 2119SB-10 0.001mm 5mm (0.2mm) 10m 3m 3.5m 6m 1m 0-100-0 1.5N or less
2124S-10 2124SB-10 4 4 2124S-10 2124SB-10 0.005mm 5mm (0.5mm) 12m 3m 5m 9m 3m 0-50 1.5N or less

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-24
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 2 Waterproof Type, 0.01mm & 0.001mm Graduation

Waterproof type dial gages having a bezel The stem and spindle are made of high-
with an outside diameter of 57mm. All types strength quench-hardened stainless steel
come with limit markers and a bezel clamp suitable for heavy-duty use.
as standard. A carbide contact point is used.
The bezel clamp can be attached to either Application of a hard coating on the surface
the right or left side. These parts can be of the crystal makes the gage highly scratch-
easily installed and removed without tools. and chemical-resistant.

90 0 10 Continuous scale 90 0 10 Continuous scale

Graduation: 0.01mm, 2046S-60 Graduation: 0.01mm, 2044S-60

Measuring range: 10mm Waterproof Measuring range: 5mm Waterproof

2046S-60

10 0 10 Balanced scale 90 0 10 Continuous scale

Graduation: 0.001mm, 2109S-70 Graduation: 0.001mm, 2110S-70

Measuring range: 1mm Waterproof Measuring range: 1mm Waterproof
Shockproof Double scale spacing
Jeweled bearing Shockproof
2109S-70 Jeweled bearing
F

F-25 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS
Unit: mm
ISO/JIS
Type D E
I

10
A
5
6.5
12.

30
8

30
C

H
16
38.
8

8 -0.009
0

F
B
G

M2.50.45

Note 1: Dimensions of the inch (ANSI/AGD Type) dial

indicator partly differ from those of the metric (ISO/
JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided
with a stem of 3/8" dia. and #4-48UNF thread
mount for the contact point.
D E
Order No. A B C D E F G H I
2046S-60 48.8 70 57 17.7 20 12.3 29.2 52 7.6
2044S-60 48.8 70 57 17.7 20 12.3 29.2 52 7.6
2109S-70 48.8 65.3 57 17.7 20 12.3 24.5 52 7.6
2110S-70 48.8 67.5 57 17.7 20 12.3 26.7 52 7.6
A

10
6.5 5
12.
30
5

30
H
C

16

FEATURES SPECIFICATIONS 38.

Metric 5 ISO/JIS type
Metric
Order No. Order No. Range Accuracy Repeat- Dial Measuring
64 Graduation
w/ lug Flat-back 90 0 10 10 0 10
w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force
2046S-60 2046SB-60 4 4 2046S-60 2046SB-60 0.01mm 10mm (1mm) 13m 3m 5m 10m 3m 0-100 2.5N or less
B

2044S-60 2044SB-60 0.01mm 8 00.009 5mm (1mm) 12m 3m 5m 10m 3m 0-100 2.5N or less
2044S-60 2044SB-60 4 4
F

2109S-70 2109SB-70 4 4 4 4 2109S-70 2109SB-70 0.001mm 1mm (0.2mm) 5m 2m 2m 4m 0.5m 0-100-0 2.0N or less
2110S-70 2110SB-70 0.001mm 4.8 1mm (0.1mm) 5m 2m 2m 4m 0.5m 0-100 2.0N or less
2110S-70 2110SB-70 4 4 4 4 4
G

M2.50.45

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-26
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 2 Standard Type, Inch Reading

SPECIFICATIONS FEATURES
Inch ANSI/AGD type Inch
Order No. Range Accuracy Repeat- Dial Measuring Order No.
Graduation
w/ lug Flat-back (range/rev) First 1 Rev / 2.5 Rev / 10 Rev Retrace ability reading force w/ lug Flat-back
2414S 2414SB .001 .5 (.1) .001 / .001 / .001 .0002 .0002 0-100 1.8N or less 2414S 2414SB
2415S 2415SB .001 .5 (.1) .001 / .001 / .001 .0002 .0002 0-50-0 1.8N or less 2415S 2415SB
2914S 2914SB .001 .5 (.1) .001 / .001 / .001 .0002 .0002 100-0 1.8N or less 2914S 2914SB 4
2506S 2506SB .0005 .125 (.05) .0005 / .0005 / .00016 .0001 0-50 1.8N or less 2506S 2506SB
2507S 2507SB .0005 .125 (.05) .0005 / .0005 / .00016 .0001 0-25-0 1.8N or less 2507S 2507SB
2514S 2514SB .0005 .5 (.05) .0005 / .0005 / .0015 .00016 .0001 0-50 1.8N or less 2514S 2514SB
2922S 2922SB .0005 .125 (.05) .0005 / .0005 / .00016 .0001 0-25-0 1.8N or less 2922S 2922SB
2356S-10 2356SB-10 .0001 .25 (.01) .0002 / .0002 / .0003 .0001 .00003 0-10 2.0N or less 2356S-10 2356SB-10 4
.0004 (First 20rev) /
.0005 (Over 20rev)
2358S-10 2358SB-10 .0001 .5 (.01) .0002 / .0002 / .0003 .00015 .00003 0-10 2.0N or less 2358S-10 2358SB-10 4
.0004 (First 20rev) /
.0008 (Over 20rev)
2802S-10 2802SB-10 .0001 .025 (.01) .0001 / .0001 / .0001 .00003 0-10 2.0N or less 2802S-10 2802SB-10 4 4
2803S-10 2803SB-10 .0001 .025 (.01) .0001 / .0001 / .0001 .00003 0-5-0 2.0N or less 2803S-10 2803SB-10 4 4
2804S-10 2804SB-10 .0001 .05 (.01) .0001 / .0001 / .0002 .0001 .00003 0-10 2.0N or less 2804S-10 2804SB-10 4 4
2805S-10 2805SB-10 .0001 .05 (.01) .0001 / .0001 / .0002 .0001 .00003 0-5-0 2.0N or less 2805S-10 2805SB-10 4 4
2905S-10 2905SB-10 .0001 .05 (.01) .0001 / .0001 / .0002 .0001 .00003 10-0 2.0N or less 2905S-10 2905SB-10 4 4 4
2923S-10 2923SB-10 .0001 .05 (.01) .0001 / .0001 / .0002 .0001 .00003 0-5-0 2.0N or less 2923S-10 2923SB-10 4 4

An inspection certificate is supplied as standard.

Refer to page IX for details.

Optional Accessories
: Backs (See page F-55.)
: Contact points (See page F-51 to F-54.)

F-27 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS
ANSI/AGD
Type
Unit: mm
D E
I
Order No. A B C D E F G H I
2414S 38.9 64.1 57 17.7 19 13.6 22 52 7.6
2415S 38.9 64.1 57 17.7 19 13.6 22 52 7.6

A
6.5 6.35
2914S 38.9 64.1 57 17.7 19 13.6 22 52 7.6
2506S 48.8 54.3 57 17.7 19 13.6 12.2 52 7.6
C

H
16
2507S 48.8 54.3 57 17.7 19 13.6 12.2 52 7.6
2514S 38.9 64.1 57 17.7 19 13.6 22 52 7.6
2922S 48.8 54.3 57 17.7 19 13.6 12.2 52 7.6
0
9.52 -0.03 2356S-10 48.8 57.2 57 17.7 19 13.6 15.1 52 7.6
B
F

2358S-10 38.9 63.6 57 17.7 19 13.6 21.5 52 7.6

4.8 2802S-10 48.8 51.4 57 17.7 19 13.6 9.3 52 7.6
2803S-10 48.8 51.4 57 17.7 19 13.6 9.3 52 7.6
G

2804S-10 48.8 51.7 57 17.7 19 13.6 9.6 52 7.6

No.4-48UNF
2805S-10 48.8 51.7 57 17.7 19 13.6 9.6 52 7.6
D E 2905S-10 48.8 51.7 57 17.7 19 13.6 9.6 52 7.6
I 2923S-10 48.8 51.7 57 17.7 19 13.6 9.6 52 7.6
A

6.5 6.35
C

H
16

0
9.52 -0.03
B
F

4.8
G

No.4-48UNF

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-28
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.

Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 2 Standard One Revolution Type for Error-free Reading

Mitutoyos unique shock-proof mechanism is The dead zone in red indicates accuracy not
incorporated, providing improved resistance to shock guaranteed.
due to sudden spindle retraction caused by impact.
This series has been developed to eliminate
the possibility of reading errors due to
miscounting multiple revolutions.

10 0 10 Balanced scale 10 0 10 Balanced scale

Graduation: 0.001mm, 2900S-10 Graduation: 0.001mm, 2901S-10

Measuring range: 0.08mm One revolution Measuring range: 0.16mm One revolution
Shockproof Shockproof
Jeweled bearing Jeweled bearing
2900S-10
2900S-72
One revolution
Shockproof
Dustproof
Jeweled bearing

10 0 10 Balanced scale 10 0 10 Balanced scale 10 0 10 Balanced scale

2929S

Graduation: 0.1mm, 2928S Graduation: 0.01mm, 2929S Graduation: 0.01mm, 2959S

Measuring range: 4mm One revolution Measuring range: 0.8mm One revolution Measuring range: 1.6mm One revolution
One revolution type Back plunger dial Shockproof Shockproof Shockproof
gages are also available. (Refer to pages 2929S-62
F-49 to F-50 for details.)
One revolution
Shockproof
Dustproof

2990T-10

F-29 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS
E
ISO/JIS D E ANSI/AGD Unit: mm
I
Type Type

D E
I D E
A

6.5 6.35 6.5

H
16

16
C

A
5 6.5 6.35

H
C

16

C
0
9.52 -0.03
B

0
8 -0.009
Note 1: Dimensions of the inch (ANSI/AGD Type) dial
F

indicator partly differ from those of the metric

4.8 4.8 (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are
G

provided with a stem of 3/8" dia. and #4-

0
48UNF thread mount for the contact point. 9.52 -0.03

B
No.4-48UNF I
0
8 -0.009

F
M2.50.45
4.8 4.8

G
Order No. A B C D E F G H I
2928S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6 No.4-48UNF I
2929S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6 M2.50.45
2929S-62 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2959S 48.8 65.2 57 17.7 20 16.9 19.8 52 7.6
2900S-10 48.8 66 57 17.7 20 16.9 20.6 52 7.6 Order No. A B C D E F G H I
2900S-72 48.8 66 57 17.7 20 16.9 20.6 52 7.6 2909S-62 48.8 51.9 57 17.7 19 13.6 9.8 52 7.6
2901S-10 48.8 66.1 57 17.7 20 16.9 20.7 52 7.6 2910S-10 48.8 51.2 57 17.7 19 13.6 9.1 52 7.6

FEATURES SPECIFICATIONS
Metric Metric ISO/JIS type
Order No. Order No. Range Accuracy Repeat- Dial Measuring
64 Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force
2928S 2928SB 4 2928S 2928SB 0.1mm 4mm (5mm) 40m 20m 20m 20m 2-0-2 1.4N or less
2929S 2929SB 4 2929S 2929SB 0.01mm 0.8mm (1mm) 8m 3m 5m 3m 40-0-40 1.4N or less
2929S-62 2929SB-62 4 4 2929S-62 2929SB-62 0.01mm 0.8mm (1mm) 8m 3m 5m 3m 40-0-40 2.0N or less
2959S 2959SB 4 2959S 2959SB 0.01mm 1.6mm (2mm) 10m 3m 5m 3m 80-0-80 1.4N or less
2900S-10 2900SB-10 4 4 2900S-10 2900SB-10 0.001mm 0.08mm (0.1mm) 3m 2m 2m 0.5m 40-0-40 1.4N or less
2900S-72 2900SB-72 4 4 4 2900S-72 2900SB-72 0.001mm 0.08mm (0.1mm) 3m 2m 2m 0.5m 40-0-40 2.0N or less
2901S-10 2901SB-10 4 4 2901S-10 2901SB-10 0.001mm 0.16mm (0.2mm) 4m 2m 2m 0.5m 80-0-80 1.4N or less

Inch Inch ANSI/AGD type

Order No. Order No. Range Accuracy Repeat- Dial Measuring
64 Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) First 1 Rev / 2.5 Rev / 10 Rev Retrace ability reading force
2909S-62 2909SB-62 4 4 2909S-62 2909SB-62 .0005 .04 / .05 .0005 / / .00016 .0001 20-0-20 2.5N or less
2910S-10 2910SB-10 4 4 2910S-10 2910SB-10 .0001 .008 / .01 .0001 / / .0001 .00003 4-0-4 1.8N or less

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-30
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.

Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 2 Standard One Revolution Type for Error-free Reading,

Waterproof Type

Mitutoyos unique shock-proof mechanism is The dead zone in red indicates accuracy not
incorporated, providing improved resistance to shock guaranteed.
due to sudden spindle retraction caused by impact. One revolution type Back plunger dial gages are also
This series has been developed to eliminate available. (Refer to pages F-44 to F-45 for details.)
the possibility of reading errors due to
miscounting multiple revolutions.

10 0 10 Balanced scale

Graduation: 0.01mm, 2929S-60

Measuring range: 0.8mm One revolution
2929S-60 Shockproof
Waterproof

10 0 10 Balanced scale

Graduation: 0.01mm, 2900S-70

Measuring range: 0.08mm
One revolution
2900S-70
Shockproof
Waterproof
Jeweled bearing

F-31 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS

ISO/JIS ANSI/AGD Unit: mm

Type Type
D E
D E I
D I D I

A
A

A
6.5 6.5 6.35
H

H
C

C
16
16
C

0
9.52 -0.03

B
B

0
0 8 -0.009 Note 1: Dimensions of the inch (ANSI/AGD Type) dial 0
9.52 -0.03 9.52 -0.03

F
F

F
indicator partly differ from those of the metric
(ISO/JIS Type) indicator.
4.8 4.8 Note 2: Inch (ANSI/AGD Type) dial indicators are 4.8 4.8
provided with a stem of 3/8" dia. and #4-

G
G

G
48UNF thread mount for the contact point.
No.4-48UNF I No.4-48UNF No.4-48UNF
M2.50.45

Order No. A B C D E F G H I Order No. A B C D E F G H I

2929S-60 48.8 70 57 17.7 20 12.3 29.2 52 7.6 2910S-72 48.8 51.2 57 17.7 19 13.6 9.1 52 7.6
2900S-70 48.8 67 57 17.7 20 12.3 26.2 52 7.6

FEATURES SPECIFICATIONS
Metric Metric ISO/JIS type
Order No. Order No. Range Accuracy Repeat- Dial Measuring
64 Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force
2929S-60 2929SB-60 4 4 2929S-60 2929SB-60 0.01mm 0.8mm (1mm) 8m 3m 5m 3m 40-0-40 2.0N or less
2900S-70 2900SB-70 4 4 4 2900S-70 2900SB-70 0.001mm 0.08mm (0.1mm) 3m 2m 2m 0.5m 40-0-40 2.0N or less

Inch Inch ANSI/AGD type

Order No. Order No. Range Accuracy Repeat- Dial Measuring
64 Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) First 1 Rev / 2.5 Rev / 10 Rev Retrace ability reading force
2910S-72 2910SB-72 4 4 4 4 2910S-72 2910SB-72 .0001 .008 / .01 .0001 / / .0001 .00003 4-0-4 2.5N or less

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-32
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 2 Standard One Revolution Type for Error-free Reading,

Lightweight Type

Excellent water- and drip-proof characteristics

(IP43).
Smooth movement thanks to the improved
design of bush and stem.
Application of a hard coating on the surface
of the crystal makes the gage scratch- and
oil-resistant.
Lightweight type (70g).

10 0 10 Balanced scale 10 0 10 Balanced scale 10 0 10 Balanced scale

2972TB Graduation: 0.01mm, 2971TB Graduation: 0.01mm, 2972TB Graduation: 0.02mm, 2973TB
Measuring range: 0.5mm One revolution Measuring range: 1mm One revolution Measuring range: 1.6mm One revolution
Shockproof Shockproof Shockproof
Dustproof Dustproof Dustproof

F-33 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS
Unit: mm
D I Flat back lid and internal frame are integral molding. 22.5

A
C

H
B
8 -0.009
0
(ISO/JIS Type) Option

F
9.52 -0.03
0
(ANSI/AGD Type) Back lid installation holes
(4 locations)
4.8
G
M2.50.45 (ISO/JIS Type)
No.4-48UNF (ANSI/AGD Type) Installation example of back lid with lug
(No.101210)

* When installing an optional back (refer to page F-55 for details) please separately prepare 4 fixing screws
(Order No. 546666: Self-tapping screw only for resin).
D I
Do not apply a tightening torque of more than 20N-cm in order to avoid stripping the screw threads.
* An optional lifting lever, release or outer frame clamp cannot be installed.
Order No. A B C D F G H I
2971TB 43.2 65.6 57 16.5 21 16.8 55 7.6

A
2972TB 43.2 66 57 16.5 21 17.2 55 7.6
2973TB 43.2 66.3 57 16.5 21 17.5 55 7.6

H
2976TB 43.2 64.7 57 16.5 20.3 15.9 55 7.6
2977TB 43.2 65 57 16.5 20.3 16.2 55 7.6
2978TB 43.2 65.3 57 16.5 20.3 16.5 55 7.6
*Refer to page F-51 to F-54 for details of contact points.

B
8 -0.009
0

F
4.8
G

FEATURES SPECIFICATIONS
No.901312
M2.50.45

Metric Metric ISO/JIS type

D F-36
Order No. Order No. Range Accuracy Repeat- Dial Measuring (2971,2972,

10 0 10 Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force
2971TB 4 4 4 4 2971TB 0.01mm 0.5mm (0.7mm) 8m 3m 5m 3m 25-0-25 1.4N or less
2972TB 4 4 4 4 2972TB 0.01mm 1mm (1.4mm) 8m 3m 5m 3m 50-0-50 1.4N or less
2973TB 4 4 4 4 2973TB 0.02mm 1.6mm (2mm) 16m 6m 8m 5m 80-0-80 1.4N or less
A
C

Inch Inch ANSI/AGD type

Order No. Order No. Range Accuracy Repeat- Measuring Dial
5
10 0 10 Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) First 1 Rev / 2.5 Rev / 10 Rev Retrace ability reading force
2976TB 4 4 4 4 2976TB .0005 .02 (.028) .0005"// .00016" .0001 10-0-10 1.4N or less
B

8 0.009
0
2977TB 4 4 4 4 2977TB .0005 .04 (.055) .0005"// .00016" .0001" 20-0-20 1.4N or less

F

2978TB 4 4 4 4 2978TB .001 .06 (.079) .001"// .0002

4.8
.0002 30-0-30 1.4N or less
G

M2.50.45

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-34
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.

Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 2 Long Stroke Type

Long stroke dial indicators with a 57mm A carbide contact point is employed.
outer frame. All the models are equipped The grand gear is made of stainless steel with
with limit markers and a bezel clamp as high resistance to wear and deformation.
standard. Application of a hard coating on the surface
An O-ring is employed to ensure air-tightness of the crystal makes the gauge highly
between the outer frame and the crystal case scratch- and chemical-resistant.
to prevent water or oil penetration. The bezel clamp and lifting lever* (optional)
Both the stem and the spindle are made of can be attached to either the right or left
high-strength quench-hardened stainless side. These parts can be easily installed and
steel suitable for heavy-duty use. removed without any tools.
* Not available for waterproof type.

90 0 10 Continuous scale 90 0 10 Continuous scale 90 0 10 Continuous scale

Graduation: 0.01mm, 2050S Graduation: 0.01mm, 2052S Graduation: 0.01mm, 2330S-10

Measuring range: 20mm With damper at Measuring range: 30mm With damper at Measuring range: 30mm With coaxial
lowest rest point lowest rest point revolution counter
2050S
2050S-19 2052S-19 With damper at
Shockproof Shockproof lowest rest point
Jeweled bearing
Jeweled bearing Jeweled bearing
With damper at With damper at
lowest rest point lowest rest point
2050S-60
Waterproof

90 0 10 Continuous scale Reverse reading

Graduation: 0.01mm, 2320S-10 Graduation: 0.01mm, 2952S

Measuring range: 20mm With coaxial Measuring range: 30mm With damper at
revolution lowest rest point
2050S-60 counter
With damper at
F lowest rest point
Jeweled bearing

F-35 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 FEATURES SPECIFICATIONS
Metric Metric ISO/JIS type
Order No. Order No. Range Accuracy Repeat- Dial Measuring
90 0 10 10 0 10 64 Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force
2050S 2050SB 4 4 2050S 2050SB 0.01mm 20mm (1mm) 20m 5m 8m 15m 4m 0-100 2.0N or less
2050S-60 2050SB-60 4 4 2050S-60 2050SB-60 0.01mm 20mm (1mm) 20m 5m 8m 15m 4m 0-100 2.5N or less
2050S-19 2050SB-19 4 4 4 4 2050S-19 2050SB-19 0.01mm 20mm (1mm) 20m 5m 8m 15m 4m 0-100 2.0N or less
2320S-10 2320SB-10 4 4 4 4 2320S-10 2320SB-10 0.01mm 20mm (1mm) 20m 5m 8m 15m 4m 0-100 2.0N or less
2052S 2052SB 4 4 2052S 2052SB 0.01mm 30mm (1mm) 25m 7m 10m 15m 5m 0-100 2.5N or less
2052S-19 2052SB-19 4 4 4 4 2052S-19 2052SB-19 0.01mm 30mm (1mm) 25m 7m 10m 15m 5m 0-100 2.5N or less
2330S-10 2330SB-10 4 4 4 4 2330S-10 2330SB-10 0.01mm 30mm (1mm) 25m 7m 10m 15m 5m 0-100 2.5N or less
2952S 2952SB 4 4 2952S 2952SB 0.01mm 30mm (1mm) 25m 7m 10m 15m 5m 100-0 2.5N or less
* 2050S-60 and 2050SB-60 are waterproof types that use a rubber bellows to cover the spindle.
Please note that the outer diameter of the bellows (9.5) is larger than that of the stem (8).

Inch Inch ANSI/AGD type

Order No. Order No. Range Accuracy Repeat- Dial Measuring
90 0 10 10 0 10 64 Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) First 1 Rev / 2.5 Rev / 10 Rev Retrace ability reading force
2416S 2416SB 4 2416S 2416SB .001 1 (.1) .001 / .001 / .002 .0002 .0002 0-100 1.8N or less
2416S-06 2416SB-06 4 2416S-06 2416SB-06 .001 1 (.1) .001 / .001 / .002 .0002 .0002 0-100 1.8N or less
2416S-10 2416SB-10 4 4 2416S-10 2416SB-10 .001 1 (.1) .001 / .001 / .002 .0002 .0002 0-100 1.8N or less
2417S 2417SB 4 2417S 2417SB .001 1 (.1) .001 / .001 / .002 .0002 .0002 0-50-0 1.8N or less
.001 / .001 / .002 /
2424S-19 2424SB-19 4 4 4 4 2424S-19 2424SB-19 .001 2 (.1) .00033 .0002 0-100 2.5N or less
.003 (First 20Rev)
2776S 2776SB 4 2776S 2776SB .0005 1 (.05) .0005 / .0005 / .0015 .0002 .0001 0-50 2.5N or less
2904S 2904SB 4 2904S 2904SB .001 1 (.1) .001 / .001 / .002 .0002 .0002 100-0 1.8N or less

DIMENSIONS

ISO/JIS ANSI/AGD Unit: mm

Type D E Type D E
E 2050S-60 D E I
I I
A

A
6.5
10

6.35 5
A

6.5 6.35
5
A

6.5 5
12. 6.5
30

8
16 C

16

C
H 30

16
H
H

38.
C

H
16

8-0.009
0
9.52 -0.03
0
F

8-0.009
B

F
F

0
8-0.009
0
B

9.5
B
F
B

4.8 4.8
G
G
G

No.4-48UNF
3 M2.50.45
No.901312 M2.50.45
M2.50.45 I

Order No. A B C D E F G H I Order No. A B C D E F G H I

F-38-1 2050S 38.8 75.2 57
(2050S,2050S-19,2052S,2052S-19,2952S,2320S-10,2330S-10)
17.7 20 16.9 29.8 52 7.6 2416S 38.9 76.8 57 17.7 19 13.6 34.7 52 7.6
F-38-2 (2050S-60)
2050S-60 59.8 87.2 57 17.7 20 12.3 46.4 52 7.6 2416S-06 38.9 76.8 57 17.7 19 13.6 34.7 52 7.6

D
2050S-19 38.8 75.2
E 38.8 75.2 57
57 17.7 20 16.9 29.8 52 7.6 2416S-10 38.9 76.8 57 17.7 19 13.6 34.7 52 7.6 F
2320S-10 17.7 20 16.9 29.8 52 7.6 2417S 38.9 76.8 57 17.7 19 13.6 34.7 52 7.6
2052S 38.8 88.7 57 17.7 20 16.9 43.3 52 7.6 2424S-19 118 142.5 57 17.7 20.9 54.3 59.7 52 9.5
2052S-19 38.8 88.7 57 17.7 20 16.9 43.3 52 7.6 2776S 38.9 76.8 57 17.7 19 13.6 34.7 52 7.6
2330S-10 38.8 88.7 57 17.7 20 16.9 43.3 52 7.6 2904S 38.9 76.8 57 17.7 19 13.6 34.7 52 7.6
2952S 38.8 88.7 57 17.7 20 16.9 43.3 52 7.6
A

6.5
C

F-36
16

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 1 Compact Type, Small Diameter

Compact dial indicators with bezel diameters

of 31 or 36mm for restricted-space
applications in gaging jigs.

10 0 10 Balanced scale 10 0 10 Balanced scale

Graduation: 0.01mm, 1911T-10 Graduation: 0.02mm, 1913T-10

Measuring range: 2.5mm Jeweled bearing Measuring range: 0.5mm Jeweled bearing

1911T-10

10 0 10 Balanced scale

Graduation: 0.01mm, 1003T

Measuring range: 4mm

1003T

F-37 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 An inspection certificate is supplied as standard.
Refer to page IX for details.

DIMENSIONS
Unit: mm
1911T-10/1913T-10 1003T 1921T-10/1923T-10/1925T-10

D E D E D E
I I I
5 5 6.35
6.5 6.5
6.5

A
A

C
C

H
16
16
H

H
13
C
8 -0.009
0
8-0.009
0
9.52-0.03
0

B
B

F
F

F
4 4 4

G
G

M2.50.45 M2.50.45 No.4-48UNF

Order No. A B C D E F G H I
1911T-10 15.5 42 31 12.9 19.2 15 11.5 30 5.9
1913T-10 15.5 39.5 31 12.9 19.2 15 9 30 5.9
1003T 18 40.3 36 13 15 9.5 12.8 32 6
1921T-10 15.5 40 31 12.9 19.2 15 9.5 30 6.8
1923T-10 15.5 38.3 31 12.9 19.2 15 7.8 30 6.8
1925T-10 15.5 37.5 31 12.9 19.2 15 7 30 6.8
Notes
1) Limit hands, bezel clampsDand lifting
E levers cannot be installed. D E
2) Contact points, other than dedicated
I types, cannot be installed. I
5
6.5 5
6.5
A

A
SPECIFICATIONS
C

16
H

H
13
Metric ISO/JIS type
Order No. Range 0 Accuracy Repeat- Dial 0 Measuring
g
Order No.Graduation
A B 8 -0.009 E 1/10FRev
C OverallD Retrace 1GRev H I 8 -0.009
B

(range/rev) ability reading force

B
w/ lug Flat-back
F

F
1911T-10 1911TB-10
1921T-10 0.01mm
15.5 2.5mm 4 31 12m
42 (1mm) 12.5 4m 19 8m
15 10m
11.5 3m
30 74
0-50-0 1.8N
56 or less 52
1913TB-10 1913TB-10
1923T-10 0.002mm
15.5 0.5mm
39.5(0.2mm)
31 6m
12.5 2.5m 19 2.5m
15 95m
G 1m
30 0-100-0
7 1.8N
56 or less 52
G

3 3
1003TB 1003TB
1925T-10 0.01mm
18 4mm
40.3(1mm) 36 13m
13 4m15 8m
9.5 11m
12.8 3m
32 0-50-0
6 1.4N
61 or less 58
No.21AZA319 No.21AZA319
M2.50.45 M2.50.45

Inch ANSI/AGD type

F-40-1 (1911,1913-10)
F-40-2 (1003)
Order No. Range Accuracy Repeat- Dial Measuring
Graduation
w/ lug Flat-back (range/rev) DFirst 1 Rev
E / 2.5 Rev / 10 Rev Retrace ability Dreading E force
1921T-10 1921TB-10 .001 .1 (.04) .001
I / .001 / .0002 .0002 0-20-0 1.8N or less
1923T-10 1923TB-10 .0005 .05 (.02) .0005 / .005 / .00016 .0001 0-10-0 1.8N or less
1925T-10 1925TB-10 .0001 .025 (.01) .0002 / .0002 / .0001 .00003 0-5-0 1.8N or less
6.5
A

6.5
A

16(13)
H
C

H
16

5 5
8 00.009
B

8 00.009
F

4
F

4
G

M2.50.45
I

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-38
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 1 Compact Type, Small Diameter

Compact dial indicators with bezel diameters

of 40mm for restricted-space applications
in gaging jigs.

90 0 10 Continuous scale 10 0 10 Balanced scale 90 0 10 Continuous scale

Graduation: 0.01mm, 1040S Graduation: 0.01mm, 1041S Graduation: 0.01mm, 1044S

Measuring range: 3.5mm Double scale Measuring range: 3.5mm Double scale Measuring range: 5mm 1044S-15
spacing spacing
Jeweled bearing

10 0 10 Balanced scale
1044S

Graduation: 0.01mm, 1045S

Measuring range: 5mm

10 0 10 Balanced scale 10 0 10 Balanced scale 90 0 10 Continuous scale

Graduation: 0.001mm, 1109S-10 Graduation: 0.002mm, 1013S-10 Graduation: 0.005mm, 1124S

Measuring range: 1mm Shockproof Measuring range: 1mm Shockproof Measuring range: 3.5mm
Jeweled Jeweled
bearing bearing

F 1109S-10

F-39 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 90 0 10 Continuous scale

Graduation: 0.01mm, 1044S-60

Measuring range: 5mm Waterproof

1044S-60

SPECIFICATIONS FEATURES
Metric ISO/JIS type Metric
Order No. Range Accuracy Repeat- Dial Measuring Order No. 63
Graduation
w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force w/ lug Flat-back
1013S-10 1013SB-10 0.002mm 1mm (0.2mm) 6m 2.5m 2.5m 5m 1m 0-100-0 1.5N or less 1013S-10 1013SB-10 4
1040S 1040SB 0.01mm 3.5mm (0.5mm) 13m 4m 8m 11m 3m 0-50 1.4N or less 1040S 1040SB 4
1041S 1041SB 0.01mm 3.5mm (0.5mm) 13m 4m 8m 11m 3m 0-25-0 1.4N or less 1041S 1041SB 4
1044S 1044SB 0.01mm 5mm (1mm) 13m 4m 8m 11m 3m 0-100 1.4N or less 1044S 1044SB
1044S-15 1044SB-15 0.01mm 5mm (1mm) 13m 4m 8m 11m 3m 0-100 0.4N or less* 1044S-15 1044SB-15 4
1044S-60 1044SB-60 0.01mm 5mm (1mm) 13m 4m 8m 11m 3m 0-100 2.0N or less 1044S-60 1044SB-60 4
1045S 1045SB 0.01mm 5mm (1mm) 13m 4m 8m 11m 3m 0-50-0 1.4N or less 1045S 1045SB
1109S-10 1109SB-10 0.001mm 1mm (0.2mm) 5m 2m 2.5m 4.5m 1m 0-100-0 1.5N or less 1109S-10 1109SB-10 4
1124S 1124SB 0.005mm 3.5mm (0.5mm) 12m 3.5m 6m 10m 3m 0-50 1.4N or less 1124S 1124SB

Inch ANSI/AGD type Inch

Order No. Range Accuracy Repeat- Dial Measuring Order No.
Graduation
w/ lug Flat-back (range/rev) First 1 Rev / 2.5 Rev / 10 Rev Retrace ability reading force w/ lug Flat-back
1410S 1410SB .001 .25 (.1) .001 / .001 / .0002 .0002 0-100 1.4N or less 1410S 1410SB
1411S 1411SB .001 .25 (.1) .001 / .001 / .0002 .0002 0-50-0 1.4N or less 1411S 1411SB
1410S-10 1410SB-10 .001 .25 (.1) .001 / .001 / .0002 .0002 0-100 1.4N or less 1410S-10 1410SB-10 4
1780S 1780SB .001 .125 (.05) .001 / .001 / .0002 .0002 0-50 1.4N or less 1780S 1780SB
1781S 1781SB .001 .125 (.05) .001 / .001 / .0002 .0002 0-25-0 1.4N or less 1781S 1781SB
1506S 1506SB .0005 .125 (.05) .0005 / .0005 / .00016 .0001 0-50 1.4N or less 1506S 1506SB
1507S 1507SB .0005 .125 (.05) .0005 / .0005 / .00016 .0001 0-25-0 1.4N or less 1507S 1507SB
1670S 1670SB .0005 .1 (.04) .0005 / .0005 / .00016 .0001 0-40 1.4N or less 1670S 1670SB
1671S 1671SB .0005 .1 (.04) .0005 / .0005 / .00016 .0001 0-20-0 1.4N or less 1671S 1671SB
1802S-10 1802SB-10 .0001 .025 (.01) .0001 / .0001 / .0001 .00003 0-10 1.5N or less 1802S-10 1802SB-10 4 4
1803S-10 1803SB-10 .0001 .025 (.01) .0001 / .0001 / .0001 .00003 0-5-0 1.5N or less 1803S-10 1803SB-10 4 4

DIMENSIONS
ANSI/AGD ISO/JIS Unit: mm
Type Type
D E D E
D EI D E
I
Unit: mm Unit: mm
Order No. A B C D E F G H I Order No. A B C D E F G H I
6.5 6.351410S 32.5 47.6 40 14.5 19 12.8 14.8 38 6.6 1013S-10 32.5 49 40 14.5 20 13.8 15.2 38 6.6
A
A

6.5 5
A
A

6.5 6.35 1411S 32.5 47.6 40 14.5 19 12.8 14.8 38 6.6 6.5 5 1040S 32.5 46 40 14.5 20 13.8 12.2 38 6.6
1410S-10 32.5 47.6 40 14.5 19 12.8 14.8 38 6.6 1041S 32.5 46 40 14.5 20 13.8 12.2 38 6.6
C

H16
H
C
H16
H

1780S 32.5 44.1 40 14.5 19 12.8 11.3 38 6.6 1044S 32.5 47.5 40 14.5 20 13.8 13.7 38 6.6
C

16
C
16

1781S 32.5 44.1 40 14.5 19 12.8 11.3 38 6.6 1044S-15*2 32.5 47.5 40 14.5 20 13.8 13.7 38 6.6
1506S 32.5 44.1 40 14.5 19 12.8 11.3 38 6.6 1044S-60 32.5 57 40 14.5 20 12.2 24.8 38 6.6
1507S 32.5 44.1 40 14.5 19 12.8 11.3 38 6.6 1045S 32.5 47.5 40 14.5 20 13.8 13.7 38 6.6
8
9.52 F
0 0
F B

F B

-0.03 0.009
9.52-0.03
0 1670S 32.5 43.4 40 14.5 19 12.8 10.6 38 6.6 80.009
0 1109S-10 32.5 49 40 14.5 20 13.8 15.2 38 6.6
B

F
F

4 1671S 32.5 43.4 40 14.5 19 12.8 10.6 38 6.6 4 1124S 32.5 46 40 14.5 20 13.8 12.2 38 6.6
4 1802S-10 32.5 41.3 40 14.5 19 12.5 8.5 38 6.6 4
*2 Use in a vertical position (contact point downward)
G

1803S-10 32.5 41.3 40 14.5 19 12.5 8.5 38 6.6

G

No.4-48UNF for the low measuring force model.

No.4-48UNF M2.50.45
IM2.50.45
I
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly
differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem
of 3/8" dia. and #4-48UNF thread mount for the contact point.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-40
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 1 Compact One Revolution Type for Error-free

Reading

Mitutoyos unique shock-proof mechanism is The dead zone in red indicates accuracy not
incorporated, providing improved resistance guaranteed .
to shock due to sudden spindle retraction One revolution type Back plunger dial gages
caused by impact. are also available. (Refer to pages F-49 to
This series has been developed to eliminate F-50 for details.)
the possibility of reading errors due to
miscounting multiple revolutions.
One revolution type Back plunger dial
10 0 10 Balanced scale gages are also available. (Refer to pages
F-49 to F-50 for details.)

2990T-10

Graduation: 0.01mm, 1929S

Measuring range: 1mm One revolution
Shockproof
1929S-62
One revolution
1929S
Shockproof
Dustproof

10 0 10 Balanced scale

Graduation: 0.001mm, 1900S-10

Measuring range: 0.1mm One revolution
Shockproof
Jeweled bearing
1900S-72
1900S-10 One revolution
Shockproof
Dustproof
Jeweled bearing

F-41 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
FEATURES SPECIFICATIONS
Metric Metric ISO/JIS type
Order No. Order No. Range Accuracy Repeat- Dial Measuring
Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force
1929S 1929SB 4 1929S 1929SB 0.01mm 1mm (1.4mm) 11m 4m 7m 3m 50-0-50 1.4N or less
1929S-62 1929SB-62 4 4 1929S-62 1929SB-62 0.01mm 1mm (1.4mm) 11m 4m 7m 3m 50-0-50 1.4N or less
1900S-10 1900SB-10 4 4 1900S-10 1900SB-10 0.001mm 0.1mm (0.14mm) 5m 2m 2.5m 1m 50-0-50 1.5N or less
1900S-72 1900SB-72 4 4 4 1900S-72 1900SB-72 0.001mm 0.1mm (0.14mm) 5m 2m 2.5m 1m 50-0-50 1.5N or less

Inch Inch ANSI/AGD type

Order No. Order No. Range Accuracy Repeat- Dial Measuring
Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) First 1 Rev / 2.5 Rev / 10 Rev Retrace ability reading force
1909S-62 1909SB-62 4 4 1909S-62 1909SB-62 .0005 .04 (.056) .0005 / / .00016 .0001 20-0-20 1.4N or less
1910S-72 1910SB-72 4 4 4 1910S-72 1910SB-72 .0001 .006 (.008) .0001 / / .0001 .00003 3-0-3 1.5N or less

DIMENSIONS

Unit: mm
ANSI/AGD ISO/JIS
Type Type

D E D E
I
A
A

6.5 6.35 6.5 5

C

16
H
C
16
H

9.52-0.03
0
80.009
0
B

B
F
F

4 4
G

No.4-48UNF M2.50.45
I

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly

differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem
of 3/8" dia. and #4-48UNF thread mount for the contact point.

Order No. A B C D E F G H I
1929S 32.5 47.5 40 14.5 20 13.8 13.7 38 6.6
Order No. A B C D E F G H I 1929S-62 32.5 47.5 40 14.5 20 13.8 13.7 38 6.6
1909S-62 32.5 41.7 40 14.5 19 12.8 8.9 38 6.6 1900S-10 32.5 53.5 40 14.5 20 16.8 16.7 38 6.6
1910S-72 32.5 40.8 40 14.5 19 12.8 8 38 6.6 1900S-72 32.5 53.5 40 14.5 20 16.8 16.7 38 6.6

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-42
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.

Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 3, 4 Long StrokeType, Large Diameter

Dial indicators with a large-diameter dial face

for easy reading.
Models with longer measuring ranges are
also available.
All types are supplied with limit markers and
a bezel clamp as standard.
Both the stem and the spindle are made of
high-strength quench-hardened stainless
steel suitable for heavy-duty use.
The bezel clamp and lifting lever
(optional)*1 can be attached to
either the right or left side. These
parts can be easily installed and
removed without tools.
*1: Can be attached only to Code No. 4046S
3046S, 3047S, 3050S, 3109S-10
and 4046S.

Graduation: 0.01mm, 3046S

Measuring range: 10mm

3058S-19

Graduation: 0.01mm, 3047S Graduation: 0.01mm, 3050S

Measuring range: 10mm Measuring range: 20mm
3109S-10

Graduation: 0.01mm, 3052S-19 Graduation: 0.01mm, 3058S-19 Graduation: 0.01mm, 3060S-19

Measuring range: 30mm Measuring range: 50mm Measuring range: 80mm

Graduation: 0.01mm, 3062S-19 Graduation: 0.001mm, 3109S-10

Measuring range: 100mm Measuring range: 1mm Graduation: 0.01mm, 4046S
Measuring range: 10mm

F-43 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
DIMENSIONS
21.5 21
Unit: mm
D E 9
ISO/JIS
Type
Unit: mm

61.2
A

Order No. A B C D
6.5 0.1 3046S 61.2 75.5 15.9 20.6 6.5 0.1
3047S 61.2 75.5 15.9 20.6

92
3050S

71
52.6 94 25.9 29.1
16
H

16
C

3052S-19 72.9 104.3 25.9 39.4

5 5
3058S-19 81.9 142.3 43.9 59.4
3060S-19 120.9 202.3 73.9 89.4
3062S-19 141.9 243.3 94.9 109.4
B

84
8 -0.009
0
F

4.8
3109S-10 61.2 79 25.9 14.1
8 -0.009
0

18.9
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ
G

from those of the metric (ISO/JIS Type) indicator. 4.8

Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of

19.1
I
M2.50.45 3/8" dia. and #4-48UNF thread mount for the contact point.
M2.50.45 4046S

ANSI/AGD
Type Unit: mm
D E
D E I D E D E Order No. A B C D E F G H I
I I I
3414S 52.6 73.4 78 17.7 19 12.6 21.8 71 9
3415S 52.6 73.4 78 17.7 19 12.6 21.8 71 9
3416S 52.6 86.1 78 17.7 19 12.6 34.5 71 9
A

A
A
A

3417S 52.6 86.1 78 17.7 19 12.6 34.5 71 9

6.5 6.35 6.5 6.35 6.5 6.35 6.50.1 6.35
3424S-19 84 149.3 78 17.7 19 50.6 59.7 71 9
H

C
H
C
C

16
H
16

16

3426S-19 123
C

198.1 78 17.7 19 73.9 85.2 71 9

H

16

3428S-19 144 244.5 78 17.7 19 94.9 110.6 71 9

3803S-10 61.2 59.7 78 17.7 19 12.6 8.1 71 9
B

B
B

3802S-10 61.2 59.7 78 17.7 19 12.6 8.1 71 9

B

0 0
0
9.52 -0.03 9.52 -0.03 9.52 -0.03 0
9.52-0.03
F
F

3052S-11 72.9 102.4 78 17.7 19 25.9 37.5 71 9

G F

4.8 4.8
4.8 4.8 No.4-48UNF
G

3058S-11 81.9 147.1 78 17.7 19 50.6 57.5 71 9

G

No.4-48UNF
No.4-48UNF 4887S-19 123 198.1 92 21.5 19 66.9 85.2 71 9
No.4-48UNF

FEATURES SPECIFICATIONS
Metric Metric ISO/JIS type
Order No. Order No. Range Accuracy Repeat- Dial Measuring
Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force
3046S 3046SB 3046S 3046SB 0.01mm 10mm (1mm) 15m 3m 5m 10m 3m 0-100 1.4N or less
3047S 3047SB 3047S 3047SB 0.01mm 10mm (1mm) 15m 3m 5m 10m 3m 0-50-0 1.4N or less
3050S 3050SB 4 3050S 3050SB 0.01mm 20mm (1mm) 20m 5m 8m 15m 4m 0-100 2.0N or less
3052S-19 3052SB-19 4 4 4 3052S-19 3052SB-19 0.01mm 30mm (1mm) 25m 7m 10m 15m 5m 0-100 2.5N or less
3058S-19 3058SB-19 4 4 4 3058S-19 3058SB-19 0.01mm 50mm (1mm) 30m 8m 10m 15m 5m 0-100 3.0N or less
3060S-19* 3060SB-19* 4 4 4 3060S-19* 3060SB-19* 0.01mm 80mm (1mm) 45m 9m 12m 20m 5m 0-100 3.0N or less
3062S-19* 3062SB-19* 4 4 4 3062S-19* 3062SB-19* 0.01mm 100mm (1mm) 50m 9m 12m 20m 5m 0-100 3.2N or less
3109S-10 3109SB-10 4 4 3109S-10 3109SB-10 0.001mm 1mm (0.2mm) 5m 2m 2m 4m 0.5m 0-100-0 1.5N or less
4046S 4046SB 4046S 4046SB 0.01mm 10mm (1mm) 15m 3m 5m 10m 3m 0-100 1.4N or less
* Use in a vertical position (contact point downward) for the long stroke model.

Inch Inch ANSI/AGD type

Order No. Order No. Range Accuracy Repeat- Dial Measuring
Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev)
First 1 Rev / 2.5 Rev / 10 Rev Retrace ability reading force
3414S 3414SB 3414S 3414SB .001 .001 / .001 / .001
.5 (.1) .0002 .0002 0-100 1.8N or less
3415S 3415SB 3415S 3415SB .001 .5 (.1)
.001 / .001 / .001 .0002 .0002 0-50-0 1.8N or less
3416S 3416SB 3416S 3416SB .001 1 (.1)
.001 / .001 / .002 .0002 .0002 0-100 1.8N or less
3417S 3417SB 3417S 3417SB .001 1 (.1)
.001 / .001 / .002 .0002 .0002 0-50-0 1.8N or less
3424S-19 3424SB-19 4 4 4 .001 / .001 / .002 / .003
3424S-19 3424SB-19 .001 2 (.1) .00033 .0002 0-100 3.0N or less
3426S-19 3426SB-19 4 4 4 (20Rev)
3428S-19 3428SB-19 4 4 4 .001 / .001 / .002 / .003
3426S-19* 3426SB-19* .001 3 (.1) .00033 .0002 0-100 3.0N or less
3802S-10 3802SB-10 4 4 (20Rev) / .005 (Over 20Rev) F
3803S-10 3803SB-10 4 4 .001 / .001 / .002 / .003
3428S-19* 3428SB-19* .001 4 (.1) .00033 .0002 0-100 3.2N or less
4887S-19 4887SB-19 (20Rev) / .005 (Over 20Rev)
4 4 4
3802S-10 3802SB-10 .0001 .025 (.01) .0001 / .0001 / .0001 .00003 0-10 2.0N or less
3803S-10 3803SB-10 .0001 .025 (.01) .0001 / .0001 / .0001 .00003 0-5-0 2.0N or less
.001 / .001 / .002 / .003
4887S-19* 4887SB-19* .001 3 (.1) .00033 .0002 0-100 3.0N or less
(20Rev) / .005 (Over 20Rev)
*Use in a vertical position (contact point downward) for the long stroke model.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-44
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

ANSI/AGD Type Metric Dial Indicator

with 3/8" Stem and #4-48UNF-Thread Contact Point Compatible Type

SPECIFICATIONS FEATURES
Metric Series 1 ANSI/AGD type Metric
Order No. Range Accuracy Repeat- Dial Measuring Order No.
Graduation 63
w/ lug Flat-back (range/rev)
First 1 Rev / 2.5 Rev / 10 Rev Retrace ability reading force w/ lug Flat-back
1230S-01 1230SB-01 0.01mm 2.5mm (1mm) 10m / 10m / 3m 2m 0-100 1.4N or less 1230S-01 1230SB-01
1231S-01 1231SB-01 0.01mm 2.5mm (1mm) 10m / 10m / 3m 2m 0-50-0 1.4N or less 1231S-01 1231SB-01
1044S-01 1044SB-01 0.01mm 5mm (1mm) 10m / 10m / 13m 3m 3m 0-100 1.4N or less 1044S-01 1044SB-01
1045S-01 1045SB-01 0.01mm 5mm (1mm) 10m / 10m / 13m 3m 3m 0-50-0 1.4N or less 1045S-01 1045SB-01
1010S-11 1010SB-11 0.002mm 0.5mm (0.2mm) 2m / 2m / 2m 1m 0-20 1.5N or less 1010S-11 1010SB-11 4 4
1011S-11 1011SB-11 0.002mm 0.5mm (0.2mm) 2m / 2m / 2m 1m 0-10-0 1.5N or less 1011S-11 1011SB-11 4 4

Metric Series 2 ANSI/AGD type Metric

Order No. Range Accuracy Repeat- Dial Measuring Order No.
Graduation 64
w/ lug Flat-back (range/rev) First 1 Rev / 2.5 Rev / 10 Rev Retrace ability reading force w/ lug Flat-back
2230S-01 2230SB-01 0.01mm 2.5mm (1mm) 10m / 10m / 3m 3m 0-100 1.4N or less 2230S-01 2230SB-01
2231S-01 2231SB-01 0.01mm 2.5mm (1mm) 10m / 10m / 3m 3m 0-50-0 1.4N or less 2231S-01 2231SB-01
2046S-01 2046SB-01 0.01mm 10mm (1mm) 10m / 10m / 13m 3m 3m 0-100 1.4N or less 2046S-01 2046SB-01
2046S-11 2046SB-11 0.01mm 10mm (1mm) 10m / 10m / 13m 3m 3m 0-100 1.4N or less 2046S-11 2046SB-11 4
2048S-11 2048SB-11 0.01mm 10mm (1mm) 10m / 10m / 13m 3m 3m 0-100 1.4N or less 2048S-11 2048SB-11 4 4 4
2047S-01 2047SB-01 0.01mm 10mm (1mm) 10m / 10m / 13m 3m 3m 0-50-0 1.4N or less 2047S-01 2047SB-01
2047S-11 2047SB-11 0.01mm 10mm (1mm) 10m / 10m / 13m 3m 3m 0-50-0 1.4N or less 2047S-11 2047SB-11 4
2902S-01 2902SB-01 0.01mm 10mm (1mm) 10m / 10m / 13m 3m 3m 100-0 1.4N or less 2902S-01 2902SB-01 4
2050S-01 2050SB-01 0.01mm 20mm (1mm) 10m / 10m / 15m / 4m 3m 0-100 2.0N or less 2050S-01 2050SB-01
20m (20Rev)
2050S-11 2050SB-11 0.01mm 20mm (1mm) 10m / 10m / 15m / 4m 3m 0-100 2.0N or less 2050S-11 2050SB-11 4
20m (20Rev)
2056S-01 2056SB-01 0.01mm 25mm (1mm) 10m / 10m / 15m/ 4m 3m 0-100 2.5N or less 2056S-01 2056SB-01
20m (20Rev)/ 25m
(Over 20Rev)
2900S-73* 2900SB-73* 0.001mm 0.08mm (0.1mm) 2m / / 2m 0.3m 40-0-40 2.0N or less 2900S-73* 2900SB-73* 4 4 4
2109S-11 2109SB-11 0.001mm 1mm (0.2mm) 3m / 3m / 4m 2m 0.3m 0-10-0 1.5N or less 2109S-11 2109SB-11 4 4
2119S-11 2119SB-11 0.001mm 5mm (0.2mm) 7m / 7m / 8m / 2m 0.3m 0-10-0 1.5N or less 2119S-11 2119SB-11 4
10m (20Rev) / 10m
(Over 20Rev)
*One revolution type

An inspection certificate is supplied as standard.

Refer to page IX for details.

Optional Accessories
: Backs (See page F-50.)
: Contact points (See pages F-46 to F-49.)

F-45 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 ANSI/AGD Type Metric Dial Indicator
with 3/8" Stem and #4-48UNF-Thread Contact Point Compatible Type

FEATURES SPECIFICATIONS
Metric Metric Series 3 ANSI/AGD type

Order No. Order No. Accuracy

Range Repeat- Dial Measuring
Graduation First 1 Rev / 2.5 Rev / 10 Rev
w/ lug Flat-back w/ lug Flat-back (range/rev) Retrace ability reading force
/ 20 Rev / Over 20 Rev
3052S-11 3052SB-11 4 4 4 3052S-11 3052SB-11 0.01mm 30mm (1mm) 10m / 10m / 15m / 4m 3m 0-100 2.5N or less
20m / 30m
3058S-11 3058SB-11 4 4 4 3058S-11 3058SB-11 0.01mm 50mm (1mm) 15m / 15m / 20m / 5m 3m 0-100 3.0N or less
25m / 40m

An inspection certificate is supplied as standard.

Refer to page IX for details.

Optional Accessories
: Backs (See page F-50.)
: Contact points (See pages F-46 to F-49.)

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-46
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

SERIES 2 Special Dial Indicators

Adjustable hand dial gauge

The hand position can be adjusted
independently of the position of the spindle
by rotating the top knob.

2048S-10

DIMENSIONS
17.7
ISO/JIS Unit: mm
15.1 20
Type 17.7 20
Clearance of
peak hold
59.8
47.4

6.5 6.5
57
57

52
52
16

16

5 5
7.6
65.2
64.9

8-0.009
16.9

0
8-0.009
0
16.9 19.5

19.8

M2.50.45 M2.50.45
7.6
2048S-10 2046S-80

SPECIFICATIONS FEATURES
Metric ISO/JIS type Metric
Order No. Range Accuracy Repeat- Dial Measuring Order No.
Graduation
w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force w/ lug Flat-back
2048S-10 2048SB-10 0.01mm 10mm (1mm) 15m 3m 5m 10m 3m 0-100 1.4N or less 2048S-10 2048SB-10 4 4

Inch ANSI/AGD type Inch

F Order No. Range Accuracy Repeat- Dial Measuring Order No.
Graduation
w/ lug Flat-back (range/rev) First 1 Rev / 2.5 Rev / 10 Rev Retrace ability reading force w/ lug Flat-back
2915S-10 2915SB-10 .001 .5 (.1) .001 / .001 / .001 .0002 .0002 0-100 1.8N or less 2915S-10 2915SB-10 4 4
2918S-10 2918SB-10 .001 .5 (.1) .001 / .001 / .001 .0002 .0002 0-50-0 1.8N or less 2918S-10 2918SB-10 4 4

F-47 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 An inspection certificate is supplied as standard.
Refer to page IX for details.

SERIES 2 Special Dial Indicators

Peak hold type dial gauge

A mechanism holds the pointer and the spindle at
the position of maximum depression and hence
displays the maximum value.
* Clearance of peak hold: push the nut in the direction of the arrow
indicated in the dimensional drawing below.

2046S-80

DIMENSIONS
17.7
ISO/JIS Unit: mm
15.1 20
Type 17.7 20
Clearance of
peak hold
59.8
47.4

6.5 6.5
57
57

52
52
16

16

5 5
7.6
65.2
64.9

8-0.009
16.9

0
8-0.009
0
16.9 19.5

19.8

M2.50.45 M2.50.45
7.6
2048S-10 2046S-80

FEATURES SPECIFICATIONS
Metric Metric ISO/JIS type
Order No. Order No. Range Accuracy Repeat- Dial Measuring
Graduation
w/ lug Flat-back w/ lug Flat-back (range/rev) Overall Retrace 1/10 Rev 1 Rev ability reading force
2046S-80 2046SB-80 4 2046S-80 2046SB-80 0.01mm 10mm (1mm) 15m 5m 10m 0-100 5.0N or less

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-48
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators An inspection certificate is supplied as standard.
Refer to page IX for details.
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

Back Plunger Type Dial Indicator

SERIES 2
Holding bar

Back plunger type dial gauges are suitable Models 2960T, 2961T, 2990T-10 and
for mounting onto leveling machine tool 2991T-10, which use Mitutoyos proprietary
tables or inspection jigs, and for use in small shock-proofing mechanism, have excellent
spaces where the graduations of standard durability and shock resistance.
dial gauges are difficult to see. Model 2990T-10 provides 0.001mm
graduation.

Holding bar (optional)

Order No. D L
10 0 10 Balanced scale 21AAA166 6mm 42mm
136567 6mm 81mm
124625 6.35mm 81mm
21AAA167 6.35mm 42mm
21AAA168 8mm 42mm
136568 8mm 81mm
* D and L: detail shown in drawing below.

DIMENSIONS
2960T Unit: mm
ISO/JIS
Graduation: 0.01mm, 2960T Type
Measuring range: 1mm One revolution 57
57
Shockproof Holding bar (optional) Holding bar (optional)
Back plunger (6 only)
23.3

58

39.1
L
D
L

D
5

8-0.009
0
28.7

5
46

Balanced scale
26.5
8-0.009
0

59.5
10 0 10 4
12.8

4
22.2 M2.50.45
17.5

35.6
M2.50.45
2960T 25.5
51 2990T-10

ANSI/AGD
Type H
A
57
57
Holding bar (optional) Holding bar
A (6 only)
23.3

58
B

Holding bar (optional) (optional)

39.1

(6 only)
L
D
5

L
B

Graduation: 0.01mm, 2990T-10

25

9.52-0.03
0
40.4

D5

0
Measuring range: 1mm 8 -0.009
5

2990T-10 L
5

One revolution
13.5 26.5

4
55.5

0
9.52-0.03
10.9

8 -0.009
0
F

Shockproof 4
4
H

22.2 4
G

Back plunger 35.6

G

No.4-48UNF 2961T M2.50.45 E

Jeweled bearing E 25.5
C
C 51 2991T-10
M2.50.45 No.4-48UNF

55.6

Metric ISO/JIS type Metric

F-49-1(2960F)
28

Range Accuracy Dial Measuring Order No.

Order No. Graduation Repeatbility
(range/rev) Overall Retrace 1/10 Rev 1 Rev reading force
5

2960T
8-0.009
0
2960T 0.01mm 1mm (1.27mm) 14m 4m 8m 3m 50-0-50 1.4N or less 4 4
23.7

2990T-10 0.001mm 0.1mm (0.14mm) 5m 2m 2.5m 1m 50-0-50 1.5N or less 2990T-10 4 4 4

4

F M2.50.45
12.8

Inch ANSI/AGD type Inch 22.1

35.6
5

Range Accuracy Dial Measuring Order No.

Order No. Graduation Repeatbility
(range/rev) First 1 Rev / 2.5 Rev / 10 Rev Retrace reading force
F

2961T .0005 .04 / .05 .0005 / / .00016 .0001 20-0-20 1.4N or less 2961T 4 4
299T-10 4 4 4 55.6

2991T-10 .0001 .008 / .01 .0002 / / .0001 .00005 4-0-4 1.5N or less
G
28

F-49 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
23.7

8 -0.009
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
0
 An inspection certificate is supplied as standard.
Refer to page IX for details.

Back Plunger Type Dial Indicator

Holding bar SERIES 1

Back plunger type dial gauges are suitable for Model 1960T and 1961T, which uses
mounting onto leveling machine tool tables Mitutoyos proprietary shock-proofing
or inspection jigs, and for use in situations mechanism, has excellent durability and
where standard dial gauges are difficult to shock resistance.
read.

90 0 10 Continuous scale Reverse reading

Holding bar (optional)

Order No. D L
21AAA166 6mm 42mm
136567 6mm 81mm
124625 6.35mm 81mm
21AAA167 6.35mm 42mm
21AAA168 8mm 42mm
1160T
136568 8mm 81mm
* D and L: detail shown in drawing below.
Graduation: 0.01mm, 1160T Graduation: 0.01mm, 1162T
Measuring range: 5mm Back plunger Measuring range: 5mm Back plunger

DIMENSIONSA
ANSI/AGD Holding bar (optional) ISO/JIS Unit: mm 10 0 10 Balanced scale
Type Type
B

A A
L Holding bar (optional)
D

Holding bar (optional)

F

0
8 -0.009
B
B

1160
H

4
1162 L L
D
5
D
5
G

1960 0
9.52
M2.5x0.45 0 8
F

-0.03 -0.009
F

H
H

E
4
C 4
G
G

E E Graduation: 0.01mm, 1960T

C Measuring range: 1mm One revolution
C
No.4-48UNF M2.5 0.45 Shockproof
Back plunger
Order No. A B C E F G H
Order No. A B C E F G H
1166T 40 22.1 35.6 22.2 25 10.9 42
1167T 40 22.1 35.6 22.2 25 10.9 42 1160T 40 22.1 35.6 22.2 25 13.8 43.358
1162T 55.6 40 22.1 35.6 22.2 25 13.8 43.3
1168T 40 22.1 35.6 22.2 25 10.9 42
1960T 40 22.1 Holding
35.6 22.2 bar (optional)
28.7 12.8 46 Holding bar
1961T 40 22.1 35.6 22.2 25 10.9 40 Note 1: Refer to pages F-51 to F-54 (6 only)
for contact point details.
58 (optional)
23

55.6 Note 2: Dimensions of the inch (ANSI/AGD Type) dial indicator partly
40

differ from those of the metric (ISO/JIS Type) indicator.

Holding I (optional)
Type) bar I
D

Note 3: Inch (ANSI/AGD dial indicators are provided with a stem

0
of 3/8"9.52
dia. and
-0.03 #4-48UNF thread mount for the contact point.
25
28

45

40

0
D

9.52 -0.03
55.5

4
13.5 26.5
10.9

L
5

FEATURES 0
8-0.009 SPECIFICATIONS
No.4-48UNF 4
5
23.7

Metric Metric 8-0.009

0 ISO/JIS type
22
21.5

59

4 35 Accuracy No.4-48UNF Dial Measuring

Order No. Order No.
4 Graduation Range (range/rev) Repeatbility
12.8

M2.5x0.45 Overall Retrace 1/1025.5

Rev 1 Rev reading force
1960T 1960T M2.5x0.45
0.01mm 2961T
1mm (1.27mm) 14m 4m 518m 2991T-10
3m 50-0-50 1.4N or less
17

4 22.14
1160T
35.6 1160T 0.01mm 29905mm (1mm) 16m 4m 8m 14m 3m 0-100 1.4N or less
25.5
1162T 4 1162T 0.01mm 5mm (1mm) 16m 4m 8m 14m 3m 100-0 1.4N or less
51
2960F
Inch Inch ANSI/AGD type
A
Accuracy Dial Measuring
F
Order No. Order No. Graduation RangeHolding bar (optional)
(range/rev) Repeatbility
First 1 Rev / 2.5 Rev / 10 Rev Retrace reading force
1961T 1961T .001 .04 (.05) .001 / / .0002 .0002 20-0-20 1.4N or less
B

4 4
1166T 1166T .001 .2 (.05) .001 / .001 / .001 .00033 .0002 0-50 1.4N or less
1167T L
D

1167T .001 .2 (.05) .001 / .001 / .001 .00033 .0002 0-25-0 1.4N or less
1168T 4 1168T .001 0
9.52 -0.03 .2 (.05) .001 / .001 / .001 .00033 .0002 50-0 1.4N or less
F

1166
H

1167
4 1168
G

No.4-48UNF 1961
E technological advances.
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest F-50
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
C
 Dial Indicators
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

Contact Points
Optional Accessory for Digimatic and Dial Indicators and Linear Gages

Ball point
Standard contact point. Unit: mm
L L L L

5
5

6
S3 S3 S3 S3
A 21AZA319 A 902119 A 21AZA320 A
21AZA321
Note: Contact points for waterproof indicators are equipped with a groove to locate the rubber boot.

A: M2.5x0.45
Material Carbide Ruby Plastic
Without groove With groove Without groove Without groove
L (waterproof type)
7.3 901312 120047 901994
8.3 21AZA319 902119
12.1 21AZA320
14 21JAA225
15 120049 120051
17 21JAA224
19.3 21AZA321
20 137391 137392
22 21JAA226
25 120053 120055
30 21AAA252 21AAA253

L L Unit: mm

Ball point
Optimal for workpieces with deep indentations.
5

.118(3) A .16(4) A
21BZB005 902018 Unit: mm
7.3
A: 4-48UNF
Material Carbide Plastic
5

L A
D
1/4" 21BZB005 902018

A: M2.5x0.45
Shell Type Point Order No. SD d
Contact point with a large radius. 21AAA349 1mm, carbide 5mm
Optimal for use on flat surfaces. 21AAA350 1.5mm, carbide 5mm
L L Unit: mm
101122 1.8mm, steel 5mm
21AAA351 2.5mm, carbide 5mm
1/5
5

21AAA352 4mm, carbide 5mm

R2.5 (.16") SR5/32
A A
( ): For inch type

A: M2.5x0.45 A: 4-48UNF Spherical Point

Order No. L Order No. L A large radius makes this contact point optimal
101386 5 193697 3/32" for use where the workpiece needs to slide from
101118 10 101184 5/32" the side.
L
137393 15 21AAA031 1/4" Unit: mm

101387 20 21AAA032 3/8"

101388 25 101185 1/2"
D

21AAA254 30 21AAA033 5/8" A

101186 3/4" Radius (SR)
21AAA034 7/8"
101187 1" A: M2.5x0.45
21AAA035 1 1/4" Order No. D L SR
21AAA036 1 1/2" 111460 5.5 3 5
F 125258 7.9 5 5
21AAA037 1 3/4"
21AAA038 2" 101119 10 5 7
21AAA039 2 1/4" A: 4-48UNF
21AAA040 2 1/2" Order No. D L SR
21AAA041 2 3/4" 101205 1/2" 1/8" .35"
21AAA042 3" 101204 3/8" 3/32" .28"

F-51 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Contact Points
Optional Accessory for Digimatic and Dial Indicators and Linear Gages
Spherical Point (Carbide) Conical Point (Carbide)
A large radius makes this contact point optimal for Used for positioning the measurement point. Since
use where the workpiece needs to slide from the it can damage a workpiece easily, it is not suitable
side. for use on soft materials.
L
Unit: mm Unit: mm
1.7
9
2

90
A
Radius (SR)

2
A
A: M2.5x0.45
Order No. D L SR A: M2.5x0.45
120058 5.2 5 5 Order No.
120059 7.5 10 7 120057
120060 10.5 10 10
15 Unit: mm
8

Conical Point

2
Used for positioning the measurement point. Since A
it can damage a workpiece easily, it is not suitable
for use on soft materials. A: M2.5x0.45

90
1
Order No.
Unit: mm 120068
L 0.5
5.2
5

5 A
Flat Point
A: M2.5x0.45 Optimal for use on convex surfaces.
Order No. Tip angle L
Unit: mm
101120 60 10 L

A: 4-48UNF
5 (.2)

Order No. L A
101190 1/2" .2" A
Flatness: 3m

L Unit: mm
A A: M2.5x0.45 A: 4-48UNF
Order No. L Order No. L
5

131365 8 133017 5/16"

A: M2.5x0.45 21AAA340 10 21AAA043 1/2"
Order No. Tip angle L 21AAA044 3/4"
101385 90 5 21AAA045 1"

A: 4-48UNF 10 3/8 Unit: mm

Order No. D L 3 1/10

101191 .2" 1/4"

D

A A
Knife Edge Point (Carbide)
A: M2.5x0.45 A: 4-48UNF
Suitable for measuring narrow groove diameter, etc. Order No. D Order No. D
Unit: mm
101117 10 101188 1/2"
8
21AAA341 15 101189 3/8"
21AAA342 20
4

Unit: mm
21AAA343 L 25
(36.8) 21AAA344 30
F
D

15 A
A
A: M2.5x0.45 Flatness: 5m
Order No.
120067

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-52
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

Contact Points
Optional Accessory for Digimatic and Dial Indicators and Linear Gages
Flat Point (Carbide) Needle Point
Optimal for use on convex surfaces. Suitable for probing the bottom of a groove or hole.
Unit: mm
Unit: mm L
8 N

5
2

Flatness: 3m A Radius (SR) A

A: M2.5x0.45 A: M2.5x0.45
Order No. Order No. N L SR
120056 101121 11 15 0.4
137413 13 17 0.2
L Unit: mm 21AAA255 21 25 0.4
21AAA256 31 35 0.4

A: 4-48UNF
D
d

Order No. L SR
1.7 (2)
A 21AAA030 .6" .016"
( ): For 120042 21AAA046 1" .016"
A: M2.5x0.45 21AAA047 1 1/2" .016"
21AAA048 2" .016"
Order No. D d L
120041 5.2 4.3* 5
120042 7 6.5* 10
120043 10.5 9.5* 10
21AAA345 17 15** 10
21AAA346 22 20** 10 Needle Point (Carbide)
21AAA347 27 25** 10 Suitable for probing the bottom of a groove or hole.
21AAA348 32 30** 10 Unit: mm
Flatness: *3m, **5m L 7

Unit: mm
D

L
2 3
A
D
d

A: M2.5x0.45
A Order No. D L
A: M2.5x0.45 120066 0.45 3
Order No. D d L 21AAA329 0.45 5
137255 7 6.4 10 120065 1 3
137399 9 8 10 21AAA330 1 5
21AAA331 1 8
21AAA332 1 10
21AAA333 1 20
Lever Point 21AAA334 1 40
Suitable for use on perpendicular faces, such as 21AAA335 1.5 5
those within mold cavities. Lever can be adjusted to 21AAA336 1.5 10
the required angle. 120064 1.5 13
Unit: mm 21AAA337 1.5 20
36
26.3 21AAA338 1.5 40
137257 2 8
21AAA257 2 18
3

21AAA258 2 28
M1.4x0.3
21AAA339 2 40
A: M2.5x0.45
F Order No.
900391

A: 4-48UNF
Order No.
900393

F-53 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Contact Points
Optional Accessory for Digimatic and Dial Indicators and Linear Gages
Blade Point (Carbide) Interchangeable Contact Point Set
Suitable for use on convex surfaces, especially those This set consists of six types of popular contact
with shallow grooves. point for extending the use of an indicator to many
10
Unit: mm applications.
2.5 A

T
D
A: M2.5x0.45
Order No. T D
120061 0.4 2
120062 0.6 2
120063 1 4 A: M2.5x0.45
Order No. Contact points included
7822 Flat Point (131365, 5mm)
Roller Point Flat Point (101117, 10mm)
Needle Point (101121)
Suitable for use on a moving workpiece surface, or
Spherical Point (101119)
where the workpiece needs to slide from the side.
Shell Type Point (101118)
Unit: mm Shell Type Point (101387)
A
23
15

3
10 R5
9
10

A: M2.5x0.45 A: 4-48UNF
Order No. Order No.
901954 901991

Extension Rod Unit: mm

5.2

9.5 (.35) Unit: mm

L 5
5.2 (2)

A: M2.5x0.45 A: 4-48UNF
Order No. L Order No. L M2.5x0.45 4-48 UNF
303611 10 139167 1/2"
Order No.
21AAA259A 15 301655 1"
21AAA011
303612 20 301657 2"
21AAA259B 25 301659 4"
9.5 (.35)
303613 30
5.2 (2)

21AAA259C 35
21AAA259D 40
21AAA259E 45 4-48 UNF M2.5x0.45
21AAA259F 50 Order No.
21AAA259G 55 21AAA012
304146 60
21AAA259H 65
F
21AAA259J 70
21AAA259L 75
21AAA259M 80
304147 90
303614 100

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-54
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

Interchangeable Backs
Optional Accessory for Digimatic and Dial Indicators
SPECIFICATIONS A dial or Digimatic indicator may be held
Description Order No. in position by clamping on either the stem
Series 1 (31, 36, 40mm) Series 2(57mm) Series 3, 4 (78, 91mm) or the lug on the back of the indicator.
Flat Back
Unit: mm
101211: a=2.2 101039: a=2.5 100836: a=3.0 The back of the indicator may need to be
136872: for water-proof 21AZB231: for
type water-proof of interchanged with another type for special
191559: for 1911TB-10, S type applications. A wide variety of backs are
1913TB-10, 1921TB-10, 192910:
a 1923TB-10, 1925TB-10 (F type waterproof available for Mitutoyo Digimatic and dial
137906: for 1003TB model) indicators.
Lug-on-Center Back 101210: metric type 101040: metric type 100691: metric
6.5 Unit: mm 101307: inch type 101306: inch type type
12 190561: for 1911T-10, 21AZB230: for 100797: inch type
45
45 1913-10 water-proof of
190139: 1921T-10, S type (mm)
1923T-10, 1925T-10 21BZB104: for
137905: for 1003T water-proof of
16
20

5 S type (inch)

Magnetic Back 8 Unit: mm Special order 900928 900929

44

Application

Back with Offset Lug 6.5 Unit: mm Special order 101167 100837
12 4
45 5
16
20

6.35

Back with Post 193172 101169 100839

Unit: mm Custom made
12.7

28

Back with Screw Mount Unit: mm 193173: M6x1, Custom 136023: M6x1 136024: M6x1
M6 X1 made 101170: 100840: #1/4-
193174: #1/4-28UNF, #1/4-28UNF 28UNF
12.7

Custom made
11.7

Adjustable Back 32 Unit: mm

136025: M6x1 136026: M6x1 136027: M6x1
M6 X1 129721: #1/4-20UNC 101168: 100838:
#1/4-20UNC #1/4-20UNC
22.2
12.7

5.3(6.4)

Back with Dovetail 6.4

A
Unit: mm 900008 Special order
From A
60
30

9.7

2.5

Back with Adjustable 50.2 Unit: mm

901963
Bracket
7
18.5

7.1
10.5
38
F
25.5
38

16

When installing to 297*TB series, please separately prepare 4 fixing screws (Order No.546666Self-tapping screw only for resin).
Do not apply a tightening torque of more than 20N-cm in order to avoid stripping the screw threads.

F-55 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Spindle Lifting Lever and Cable
Optional Accessories for Digimatic and Dial Indicators
Spindle Lifting Lever Application
The Spindle Lifting Lever is attached to
the top end of the spindle for improved
inspection efficiency when using a dial
indicator mounted on a stand.

902100
Use for S type Series 1 and F type Series 2 (up to
10mm/.4 range) dial indicators.

21BZA205
Use for F type Series 1 dial indicators.

900527: Lever
21AZB149 101171: Screw
Use for S type Series 2, 3, and 4 dial indicators (up
to 10mm/.4).

902011
Use for F type Series 2 dial indicators (up to
10mm/.4 range).

21AZB150
Use for S type Series 2 and 3 dial indicators (from
10mm/.4 up to 20mm/.8).

903424
Use for F type Series 2 dial indicators (up to
20mm/.8 range) and Series 3 and 4 dial
indicators (up to 10mm/.4 range).

903307: Lever
192686: Screw

21EZA198
Use for ID-SSID-SXID-CX

21AZB149: Lever
101171: Screw
F

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-56
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

Spindle Lifting Cable

901975: with auto-stop function

Note: This accessory is not applicable to range of 20mm or more, 2048S(B), 2046S(B)-80, 1003T1911T-101913T-101921T-10
1923T-101925T-10and 2971TB to 2978TB.

Spindle Lifting Knob Application

137693
Suitable for 4.8mm spindle diameter.
Spindle Lifting
Screw Cable
(M2.5 or 4-48UNF)

Spindle

F-57 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Limit Stickers
These are stuck onto the dial face or crystal of a Series
2 dial indicator (55.6mm or 57mm bezel diameter) to
indicate tolerance limits.

Red Green Yellow

No.136420 No.136421 No.136422

(10 sheets/set) (10 sheets/set) (10 sheets/set)

Color-coded Spindle Caps

9 color-coded spindle caps are available for dial indicators with a range of 10mm or less.

Order No.
Color
Standard Waterproof
Black 193051 193595
White 193051W 193595W
Red 193051R 193595R
Green 193051G 193595G
Blue 193051B 193595B
Yellow 193051Y 193595Y
Orange 193051D 193595D F
Pink 193051P 193595P
Navy 193051S 193595S
Note: This accessory is not applicable to 1003T
1911T-101913T-101921T-101923T-10
1925T-10and 2971TB to 2978TB.
Note: When attaching to small dial indicators, the overall height will be 8mm taller.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-58
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Dial Indicators
Comparison measuring instruments which ensure high quality, high accuracy and reliability.

Dial Indicator Repair Tool Kit

Set 7823
Set Configuration
(1) Spindle rest (129730)
(15)
(2) Pin remover (129732)
(14) (3) Punch (129733)
(16) (4) Bearing adjuster (129734)
(22) (17) (5) Pinion set (129735)
(20) (6) Reamer 1 (129736)
(13) (18)
(7) Reamer 0.6 (193702)
(19) (8) Reamer for pointer (0.5: 1/20 taper)
(21) (21JAA273)
(9) Pointer removing tool (126628)
(10) Pliers (901180)
(5) (6) (7) (8) (25) (24) (9) (11) Nippers (901179)
(2) (12) Pin rest (129731)
(26)
(3) (13) Grease (901171)
(4) (23) (14) Hammer (901178)
(15) Stick (21JAA314)
(10) (16) Brush (901177)
(17) Brush (901176)
(11) (18) Pin-vise (901175)
(19) Screwdriver (Phillips/flat blade) (901174)
(27) (20) Tweezers (129729)
(21) Screwdriver (Phillips) (901173)
(1) (12)
(22) Lubricating oil (21JAA313)
(23) Pointer removing tip (0.8) (126630)
(24) Pointer removing tip (0.5) (126630B)
(25) Pointer removing tip (1.6) (126630C)
(26) Adjustable nut (100699)
(27) Case (901182)
Application examples
Lubricate bezel to restore smooth operation Remove or replace a pin
Apply the grease (No. 13) to the entire groove of the bezel with Place the spindle on the groove of the spindle rest (No. 1).
the brush (No. 16). Remove the pin with the pin remover (No. 2) and the hammer
Renew lubricant in bearing (No. 14). Tap the pin directly with the hammer (No. 14) to
Apply the lubrication oil (No. 22) to the pinion bearing with the replace the pin.
stick (No. 15). Replace the long or little hand
Remove the long hand Screw the pinion rest (No. 5) into the pin rest (No. 12). Support
Position the pointer removing tool (No. 9) on the hole diameter the pinion with the fixed pinion rest, and replace the hand with
of the minute hand. Push the pivot with the pointer removing the punch (No. 3) and hammer (No. 14). Reaming is necessary in
tool to remove the long hand. order to use a new hand. Use the reamer 1 (No. 6) or reamer
Remove the little hand 0.6 (No. 7) for F-type dial indicators and dial test indicators.
Remove the little hand with the nippers (No. 11). Use the reamer for hands (0.51/20 taper) (No.8) on S type and
T type dial indicators.
Adjust a bearing
Press the steel or jeweled bearing into its housing using the
bearing adjuster (No. 4).

Dial Indicator Crystal Setter

7000 Replacing bezels and graduation plates
Used for fitting a crystal on dial indicators (Series 1 and 2), dial test A bezel and graduation plate must be swaged together so
indicators, and dial calipers. (Integrated molded crystals are excluded.) that the graduation plate always rotates with the bezel.
8 sizes of crystal setting pads are supplied as standard. Assemblies comprised of a swaged bezel and graduation
Application examples plate are available for some models.
Nos. 2 and 3: Pocket-type dial test indicators Code No. of swaged
Nos. 3 and 4: Dial test indicators, universal-type test indicators, full-range Code No. of dial indicators
assemblies
of Series 1 dial indicators, full range of dial calipers
Nos. 7 and 8: full-range of Series 2 dial indicators, dial height gage with 2046S 21AZB132
counter 2109S-10 21AZB138
2046F 903457
Size of crystal setting pads (mm) 2109F 903464
(1) 19.5 (2) 22.5 (3) 25.5 (4) 28.5
(5) 32.5 (6) 35 (7) 38 (8) 50

F Crystal setting pads set (including No. 1 to No. 8): 21JAA032

Note: Crystal setting pads for large dial indicators (Series 3 and 4) are
available by special order.

(1) (2) (3) (4) (5) (6)

F-59 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 F

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-60
Therefore the company reserves the right to change any or all aspects of any product specification without notice.