Scribd
Upload
181 views1 page

Kiln Audit Sampling Frequency

Kiln Audit: Sampling frequency recommends collecting samples of kiln feed every 2 hours, fuel every 2 hours, and clinker hourly. It also recommends 2 samples each of dust from Preheater 2 and material from the PH bottom stage cyclone exit. Except for specific tests, detailed analysis can be performed on composite samples collected from these sources.

Uploaded by

Vijay Bhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
181 views1 page

Kiln Audit Sampling Frequency

Kiln Audit: Sampling frequency recommends collecting samples of kiln feed every 2 hours, fuel every 2 hours, and clinker hourly. It also recommends 2 samples each of dust from Preheater 2 and material from the PH bottom stage cyclone exit. Except for specific tests, detailed analysis can be performed on composite samples collected from these sources.

Uploaded by

Vijay Bhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Kiln Audit: Sampling frequency

Sample collection frequency


Kiln Feed every 2 hour

Fuel Every 2 hour

Clinker Hourly

Dust from Preheater 2 samples

PH bottom stage cyclone exit material 2 samples

Note:

Except temperature, fineness, moisture, free lime and

litre weight, the detailed analysis could be performed on

composite samples.

You might also like