Canon know How

Systems & Technical Support Division

imageRUNNER

imagePASS

imageCLASS

LaserCLASS

Latest Supported Software / Firmware Versions

Last Updated, Friday, October 07, 2005

 Table of Contents
imageCLASS
iC C2500 18
iC C3500 18
imagePASS
iP C1 17
iP D1 17
iP E1 17
iP L1 17
iP M1 17
iP M2 17
iP M3 17
imageRUNNER (B / W)
iR 85+ 7
iR 105 7
iR 105+ 8
iR 1310 / 1330 / 1370F 9
iR 1600 / 2000 9
iR 1630 / 1670F 9
iR 200L 8
iR 2010F 9
iR 2200 / 2800 / 3300 10
iR 2220N / 2220i / 3320i 10
iR 2230 / 2830 / 3530 11
iR 2270 / 2870 / 3570 / 4570 11
iR 3250 12
iR 300 / 400 8
iR 3300i 12
iR 400S 8
iR 5000S / 6000 12
iR 5000d / 6000 13
iR 5000i 13
iR 5020 / 6020 / 5020i / 6020i 14
iR 5570 / 6570 14
iR 600 / 550 / 60 9
iR 7200 15
iR 8070 15
iR 8500 / 85 16
iR 9070 16
imageRUNNER (Color)
iR C2050 3
iR C2058 3
iR C2620 3
iR C3100 4
iR C3170 4
iR C3200 5
iR C3220 6
iR C5800 / 6800 6
LaserCLASS
LC710 18
LC720i / LC730i 18

2
 imageRUNNER (Color)
imageRUNNER C2050
System Software: 2.01 [FE1-5306-000]
DC-CON: 8.01
SCON: 10.01
RCON: 8.03
Controller: Color Network Printer Board- A1 [4549A02AA]
Controller: Color Network Printer Board- B1 [7465A001AA] (Engine firmware update
required. See TP IRC2050-T006)

imageRUNNER C2058
System Software: 1.03 [FE1-5617-020]
DC-CON: 3.01
SCON: 10.01
RCON: 8.03
Controller: Color Network Printer Board- B1 [7465A001AA]

imageRUNNER C2620
System Software: 81.01 [FY9-4153-018]
Language: 81.01
Boot ROM: 70.01
RUI: 79.04
MEAP Cont: 79.06
DC-CON: 33.02
RCON: 4.01
DADF-K1: 5.01
Finisher-N1: 4.01
Finisher-N2: 4.01 (Stacker)
Finisher-N2: 3.01 (Saddle)
Finisher-M1: 4.02
G3 FAX: WLD-56.01
Canon Controller: Color Network Multi-PDL Printer Kit-A2 [7777A011BA]
EFI Controller: imagePASS-C1 [7792A007AA]

3
imageRUNNER C3100
System Software: 42.02 [FY9-4220-001]
Language: 42.02
Boot ROM: 21.04
RUI: 42.02
DCON: 40.01
RCON: 21.01
HD Format: 00.09
ALL 42.02 Rev 00a
ALL_HDF 42.02 Rev 00a
Finisher-P1: 11.01
Finisher-Q1: 6.10
Finisher-Q3: 6.10
Saddle-Q2/Q4: Saddle= 5.01 / Main = 6.10
Punch-M1: 4.03
G3 Fax: WLD-56.01
Canon Controller: Color Network Multi-PDL Printer Kit-B1 [9007A003AA]
EFI Controller: imagePASS-E1 [8721A007AA]

imageRUNNER C3170U (UFRII) / C3170i

System Software: 20.29 [FY9-4220-001]
Language: 20.29
Boot ROM: 2.01
RUI: 20.28
MEAP Cont: 20.25
Browser: 2.01
TTS: 2.01 (JE)
Key: 1.01
Portal Service: 2.0.2
SDL: 1.3.8
SSO: 2.2.9
SA: 2.01
SDICT: 1.07 (J)
DCON: 10.03
RCON: 30.03
HD Format: 00.02
ALL 20.29 Rev 00a
ALL_HDF 20.29 Rev 00a
Finisher-P1: 12.02
Finisher-Q1: 10.01
Finisher-Q3: 10.01
Saddle-Q2/Q4: Saddle= 6.01 / Main = 10.01
Punch-M1: 4.03
G3 Fax: WLD-65.01
Canon Controller: Color Network Multi-PDL Printer Kit-D1 [0677B001BA]

4
imageRUNNER C3200
System Software: 11.03 [FY9-4153-009]
Language: 11.03
Boot ROM: 5.01
RUI: 9.03[J/E/I] 9.04 [F/G]
DCON: 11.02
RCON: 4.01
HD Format: 00.16 (use v00.20 (eSupport) if having difficulty formatting a new hard drive)
ADF: 4.01
Finisher-N1: 4.01
Finisher-N2: 4.01 [Stacker]
3.01 [Saddle]
Finisher-M1: 4.02
G3 Fax: 37.03
Canon Controller: Color Network Multi-PDL Printer Board-A1 [7777A001AA]
EFI Controller: imagePASS-C1 [7792A001AA]

imageRUNNER C3200 (with MEAP Expansion Kit. see TP04 240.pdf)

System Software: 81.01 [FY9-4153-018]
Language: 81.01
Boot ROM: 6.06
RUI: 79.04
DCON: 33.02
RCON: 4.01
HD Format: 00.20
ADF: 5.01
Finisher-N1: 4.01
Finisher-N2: 4.01 [Stacker]
3.01 [Saddle]
Finisher-M1: 4.02
G3 Fax: 56.01
Canon Controller: Color Network Multi-PDL Printer Board-A1 [7777A001AA]
EFI Controller: imagePASS-C1 [7792A007AA]

5
imageRUNNER C3220
System Software: 81.01 [FY9-4153-018]
Language: 81.01
Boot ROM: 70.01
RUI: 79.04
MEAP Cont: 79.06
Portal Service: 2.0.1
SDL: 1.3.5
SSO: 2.2.6
SA: 2.0.1
ESM: 1.1
DC-CON: 33.02
RCON: 4.01
HD Format: 00.20
ADF: 5.01
Finisher-N1: 4.01
Finisher-N2: 4.01 (Stacker)
Finisher-N2: 3.01 (Saddle)
Finisher-M1: 4.02
G3 FAX: 56.01
Canon Controller: Color Network Multi-PDL Printer Kit-A2 [7777A004AA]*
EFI Controller: imagePASS-C1 [7792A007AA]*
*EFI Controller ColorPASS Z3000 [9856A001AA]
*Minimum imageRUNNER versions required: MN-CONT = 55.02; Boot ROM = 70.01; MEAP Cont = 55.01;
R-CON = 4.01; DC-CON = 38.08.

imageRUNNER C5800 / C6800

System Software: 12.02 [FY9-4194-003]
Language: 12.02
Boot ROM: 30.01
RUI: 12.01
DCON: 10.06
RCON: 10.01
HD Format: 00.06
ALL 12.02 Rev 00a
ALL-HDF 12.02 Rev 00a
G3 Fax 59.01
Finisher-R1: 6.10
Finisher-R2: 6.10
Saddle-R2: 5.01
Punch-M1: 4.03
Canon Controller: Color Network Multi-PDL Printer Kit-C1 [8741A001AA]
EFI Controller: imagePASS-D1 [8722A001AA]

6
 imageRUNNER (B/W)
imageRUNNER 85+
System Software: 11.05 [FY9-4211-004]
Language: 11.05
Boot ROM: 6.36
RUI: 11.04
MEAP Cont: 11.03
SDICT: 1.07 (J)
KEY: 1.01
HD Format: 00.05
Portal Service: 2.0.1
SDL: 1.3.6
SSO: 2.2.7
SA: 2.0.1
ALL: 11.05 Rev 00a
ALL_HDF: 11.05 Rev 00a
Browser: 1.00
TTS: 1.11
R-CON: 8.01
DC_CON: 50.03
ADF: 8.01
Finisher K1N/K2N/: 24.01/22.01
Saddle Finisher K3N: Main- 24.01/22.01 Saddle- 5.01
Trimmer: 6.01
Controller: Network Multi-PDL Printer Kit-F1 [9987A001AA]
EFI Controller: imagePASS-M3 [9608A001AA]

imageRUNNER 105
System Software: 83.01 [FY9-4078-017]
Language: 83.01
Boot ROM: 26.44
RUI: 83.01
HD Format: 0.11
R-CON: 10.01
DC-CON: 10.09
ADF: 7.01
Finisher-K1/K2/K3: 4.03/4.01
Finisher-K1N/K2N/K3N: 24.01/22.01
Saddle: 4.05
Trimmer: 6.01
All: 83.01 C/N rev 00
ALL HDF: 83.01 C/N rev 00
3K Stacker 3.02
Controller: Network Multi-PDL Printer Kit-B3 [6935A009AA]
EFI Controller: imagePASS-M1/M2

7
imageRUNNER 105+
System Software: 11.05 [FY9-4211-004]
Language: 11.05
Boot ROM: 6.36
RUI: 11.04
MEAP Cont: 11.03
SDICT: 1.07
KEY: 1.01
HD Format: 00.05
Portal Service: 2.0.1
SDL: 1.3.6
SSO: 2.2.7
SA: 2.0.1
ALL: 11.05 Rev 00a
ALL_HDF: 11.05 Rev 00a
Browser: 1.00
TTS: 1.11
R-CON: 10.01
DC_CON: 21.02
ADF: 7.01
Finisher K1N/K2N/: 24.01/22.01
Saddle Finisher K3N: Main- 24.01 / Saddle- 4.05
Trimmer: 6.01
Controller: Network Multi-PDL Printer Kit-F1 [9987A001AA]
EFI Controller: imagePASS-M3 [9608A001AA]

imageRUNNER 200L (iR210 without a Duplexer)

System: 2.1 [FE1-4925-060]
IP: 73.01
DCON: 4.01
Controller:
Network Printer PS/PCL Board-D1 [FE1-4921-000]
Network Printer PCL Board-E1 [FE1-4920-000]

imageRUNNER 330 / 400

System: 2.1 [FE1-5044-020]
IP: 60.10
DCON: 25.01
Controller:
Network Printer PS/PCL Board-H1 [0403A001AC]
Network Printer Kit-K1 [0405A001AC]

imageRUNNER 400S
System: 1.0 [FE1-5666-000]
IP: 60.10
DCON: 25.01
Controller:
Network Printer PS/PCL Board-P1 [7790A001AA]
Network Printer Kit-R1 [7791A001AA]

8
imageRUNNER 600 / 550 / 60
System: 2.1 [FE1-5024-030]
2.1 Pro [FE1-5194-010]
IP: 33.01
NFC: 25.01
Controller: Network Printer PS Board-F1 [FE1-5023-000]

imageRUNNER 1310 / 1330 / 1370F

MAIN [System]: WLD-36-05 [DIMM Assembly: FG6-9581-030]
MAIN2: WLD-04-01
ECONT: 0015
PDL: 0200
Controller: AXIS 1610 (v5.94 or higher) [0273V171]

imageRUNNER 1600 / 2000

MAIN [System]: 53.02 [DU7-C013-010] [Flash through USB port on Main Controller]
MAIN2: WLD-01-01
ECONT [DCON]: 0063
Finisher-L1: 2.03
Card Reader-E1 4.0
Network [NIC]: 3.11
PCL: 2.0 (Replace ROM DIMM Module FR-65, to update: [0646A030AA])
PS: 1.12
PPD: 1.13
Controller: Printer Board-N1 [7444A005AA]

imageRUNNER 1630 / 1670F (replace ROM DIMM to update)

MAIN [System]: WLD-43-03
MAIN2: WLD-04-01
ECONT: 0004
PDL: 0210
Controller: AXIS 1610 (v5.95 or higher) [0273V171]

imageRUNNER 2010F
MAIN [System]: 55.01 (See TP04 025.pdf for files) [Flash through USB port on Main Controller]
MAIN2: WLD-01-01
ECONT [DCON]: 0063
G3OPT [Fax]: WLD-28-09
G3OPT2 [Fax]: WLD-02-01 [self-extracting files: download from e-Support (see TP04 025.pdf)]
Finisher-L1: 2.03
Card Reader-E1: 4.0
Network [NIC]: 3.12 [self-extracting files: download from e-Support (see TP04 025.pdf)]
PCL: 2.00 (Replace ROM DIMM Module FR-65, to update: [0646A030AA])
PS: 1.12
PPD: 1.13
Controller: Printer Board-N1 [7444A005AA]
9
imageRUNNER 2200 / 2800 / 3300
System Software: 43.01 [FY9-4157-004]
Language: 43.01
Boot ROM: 26.44
RUI: 42.01
R-CON: 7.01
HD Format: 0.12
DC-CON: 12.01
DADF-H1 6.01
Finisher-J1: 1.05
Finisher-G1: 5.01
PUNCH: 5.01
FAX: 31.02
ALL: 43.01 C/N rev 00
ALL_HDF: 43.01 C/N rev 00
Canon Controller: Network Multi-PDL Printer Kit-C1 [6895A001AA]

imageRUNNER 2220N / 2220i / 3320N / 3320i

System Software: 35.02 [FY9-4157-004]
Language: 35.02
Boot ROM: 26.44
RUI: 35.01
MEAP Cont: 35.01
HD Format: 00.07
Portal Service: 1.0
SDL: 1.1
SA 1.1
SS0 1.1
R-CON: 7.01
DC-CON: 12.01
DADF-H1: 6.01
Finisher J1: 1.05
Finisher-G1: 5.01
Punch 5.01
Fax: 31.02
ALL: 35.02 N rev 00
ALL_HDF: 35.02 N rev 00
Controller: Network Multi-PDL Printer Kit-C1 [6895A001AA]

10
imageRUNNER 2230 / 2830 / 3530 ROM Model (copier only- update via SST and the built-in NIC)
System Software: 20.16 [FY9-4201-007]
Language: 20.16
Boot ROM: 7.37 C
ALL: 20.16
R-CON: 9.03
DC-CON: 16.02
Finisher S1: 11.02

imageRUNNER 2230 / 2830 / 3530 HDD Model (printer model- requires optional 20 GB HDD and 128MB RAM)
System Software: 21.02 [FY9-4201-007]
Language: 21.02
Boot ROM: 7.37 (P= UFR II / H= UFR II & PCL)
RUI: 20.25
KEY: 1.01
HD Format: 00.05
ALL: 21.02 Rev 00a
ALL_HDF: 21.02 Rev 00a
R-CON: 9.03
DC-CON: 16.02
Finisher S1: 11.01
Controller: UFR II Printer Kit-E3 (UFR II only) [9906A004AA]
PCL /UFR II Printer Kit-E2 (UFR II PCL 5e/6) [9592A001AA]

imageRUNNER 2270 / 2870 / 3570 / 4570

System Software: 32.02 [FY9-4201-007]
Language: 32.02
Boot ROM: 6.36
RUI: 32.02
MEAP Cont: 32.02
SDICT: 1.06
KEY: 1.01
HD Format: 00.05
Portal Service: 2.0.1
Browser: 1.00
SDL: 1.3.6
SSO: 2.2.7
SA: 2.0.1
ALL: 32.02
ALL_HDF: 32.02
TTS: 1.11
R-CON: 9.03
DC-CON: 16.02
Finisher Q3/Q4: 10.01
Finisher S1: 11.02
Saddle Finisher-Q4: Main= 10.01, Saddle= 6.01
Puncher Unit-M1: 4.03
Fax (G3 Multi-Line): 71.01
Controller: Network Multi-PDL Printer Kit-E1 [9593A003AA]
11
imageRUNNER 3250
System Software: 9.02 [free distribution only- per iR3250-T001]
PCNT: 5.06
Boot ROM: 7.01
Scanner: 6.02
ADF: 33.01
RUI: 6.10
Sorter: 3.10
IK PD: 1.09
Controller: Printer Board [FG3-0633-000]

imageRUNNER 3300i
System Software: 26.01 [FY9-4157-004]
Language: 26.01
Boot ROM: 26.44
RUI: 26.01
R-CON: 7.01
HD Format: 00.06
DC-CON: 12.01
DADF-H1 6.01
Finisher-J1: 1.05
Finisher-G1: 5.01
PUNCH: 5.01
FAX: 31.02
ALL: 26.01 N rev 00
ALL_HDF: 26.01 N rev 00

imageRUNNER 5000S / 6000

System Software: 20.01 [FY9-4155-004]
Boot ROM: 14.54 (does not display C or N for the boot ROM)
RUI: 20.01
R-CON: 8.01
HD Format: 00.17
DC-CON: 23.01
ADF: 8.01
Finisher: 13.01
Saddle: 5.01
Controller:
Printer Kit-A1 [discontinued] (main controller has 2 Boot ROM slots (Run & Flash)
Print Controller Upgrade Kit [7126A001AB]
Printer Kit A2 [0406A017AA]

12
imageRUNNER 5000d / 6000
System Software: 81.03 [FY9-4155-004]
Boot ROM: 26.44
RUI: 81.01
R-CON: 8.01
HD Format: 00.13
DC-CON: 23.01
ADF: 8.01
Finisher: 13.01
Saddle: 5.01
Controller: Printer Kit-A2 [0406A017AA]
EFI Controller: imagePASS-L1

imageRUNNER 5000i
System Software: 9.01 [FY9-4155-005]
Language: 9.01
Boot ROM: 26.44
RUI: 9.01
HD Format: 00.14
RCON: 8.01
DC-CON: 23.01
ADF: 8.01
Finisher: 13.01
Saddle: 5.01
Controller: Network Multi-PDL Printer Kit-A2 [0406A017AA]

imageRUNNER 5000i (with Controller Upgrade Kit: 8734A001AA)

System Software: 45.01 [FY9-4155-004]
Language: 45.01
Boot ROM: 26.44
RUI: 45.01
R-CON: 8.01
HD Format: 00.13
RCON: 8.01
DC-CON: 23.01
ADF: 8.01
Finisher: 13.01
Saddle: 5.01
Controller: Network Multi-PDL Printer Kit-A2 [0406A017AA]
13
imageRUNNER 5020 / 6020 / 5020i / 6020i
System Software: 56.02 [FY9-4155-005]
Language: 56.02
Boot ROM: 26.44
RUI: 56.01
MEAP Cont: 56.01
HD Format: 00.14
Portal Service: 1.0
SDL: 1.1.0
SSO: 1.1.0
SA: 1.1.0
R-CON: 8.01
DC-CON: 23.01
ADF: 8.01
Finisher: 13.01
Saddle: 5.01
Controller: Network Multi-PDL Printer Kit-D1 [8743A003AA]
EFI Controller: imagePASS-M2 v2.12 [for imageRUNNER-5020/6020 only]

imageRUNNER 5570 / 6570

System Software: 20.65 [FY9-4218-003]
Language: 20.65
Boot ROM: 6.36
RUI: 20.50 (JEFIG)
MEAP Cont: 20.40
SDICT: 1.06 (J)
KEY: 1.01
HD Format: 00.05
Portal Service: 2.0.2.01
SDL: 1.3.8
SSO: 2.2.9
SA: 2.0.1
ALL: 20.65 (Rev 00a)
ALL_HDF: 20.65 (Rev 00a)
R-CON: 3.01
DC-CON: 20.05
Browser: 1.02
TTS: 1.11 (E)
TTS: 1.11 (J)
Finisher T1: 6.02
Saddle Finisher T2: 6.02 / 4.01 (Main / Saddle)
Puncher Unit-M1: 4.03
Controller: Multi-PDL Printer Kit-G1 (UFR II/PCL/PS) [0111B003AA]
Controller: ImagePASS-M3 (v1.1 or later) [9608A004AA]

14
imageRUNNER 7200
System Software: 83.01 [FY9-4078-017]
Language: 83.01
Boot ROM: 26.44
RUI: 83.01
HD Format: 00.11
R-CON: 8.01
DC-CON: 40.06
ADF: 8.01
Finisher-K1/K2/K3: 4.03
Finisher-K1N/K2N/K3N: 24.01
Saddle: 4.05
Trimmer: 6.01
All: 83.01 C/N rev 00
ALL HDF: 83.01 C/N rev 00
3K Stacker 3.02
Controller: Network Multi-PDL Printer Kit-B3 [6935A009AA]
EFI Controller: imagePASS-M1/M2

imageRUNNER 8070
System Software: 11.05 [FY9-4211-004]
Language: 11.05
Boot ROM: 6.36
RUI: 11.04
MEAP Cont: 11.03
SDICT: 1.07
KEY: 1.01
HD Format: 00.05
Portal Service: 2.0.1
SDL: 1.3.6
SSO: 2.2.7
SA: 2.0.1
ALL: 11.05 Rev 00a
ALL_HDF: 11.05 Rev 00a
Browser: 1.00
TTS: 1.11
R-CON: 8.01
DC_CON: 50.03
ADF: 8.01
Finisher K1N/K2N/: 24.01 / 22.01
Saddle Finisher K3N: Main- 24.01 / 22.01, Saddle- 5.01
Trimmer: 6.01
Controller: Network Multi-PDL Printer Kit-F1 [9987A001AA]
EFI Controller: imagePASS-M3 [9608A001AA]
15
imageRUNNER 8500 / 85
System Software: 83.01 [FY9-4078-017]
Language: 83.01
Boot ROM: 26.44
RUI: 83.01
HD Format: 00.16
R-CON: 10.01
DC-CON: 40.09
ADF: 7.01 [iR8500 only]
Finisher-K1/K2/K3: 4.03
Finisher-K1N/K2N/K3N: 24.01
Saddle: 4.05
Trimmer: 6.01
All: 83.01 C/N rev 00
ALL HDF: 83.01 C/N rev 00
3K Stacker 3.02
Controller: Network Multi-PDL Printer Kit-B3 [6935A009AA]
EFI Controller: imagePASS-M1/M2

imageRUNNER 9070
System Software: 11.05 [FY9-4211-004]
Language: 11.05
Boot ROM: 6.36
RUI: 11.04
MEAP Cont: 11.03
SDICT: 1.07
KEY: 1.01
HD Format: 00.05
Portal Service: 2.0.1
SDL: 1.3.6
SSO: 2.2.7
SA: 2.0.1
ALL: 11.05 Rev 00a
ALL_HDF: 11.05 Rev 00a
Browser: 1.00
TTS: 1.11
R-CON: 10.01
DC_CON: 21.02
ADF: 7.01
Finisher K1N/K2N: 24.01/22.01
Saddle Finisher K3N: Main-24.01/22.01, Saddle- 4.05
Trimmer: 6.01
Controller: Network Multi-PDL Printer Kit-F1 [9987A001AA]
EFI Controller: imagePASS-M3 [9608A001AA]
16
 imagePASS
imagePASS M1 (V2.0) [7254A004AA]
System Software: [FE1-5569-030]

ImagePASS M2 (v1.0) [7254A026AA]

System Software: [FE1-5750-000] (This version 1.0 can also be installed on the M1)

ImagePASS M2 (v2.12) [7254A026AA]

System Software: [FE1-5873-000]

imagePASS M3 (v1.0) [9608A001AA]

System Software: [FE1-5992-000]

imagePASS M3 (v1.1) [9608A004AA]

System Software: [FE1-6058-000]

ImagePASS L1 (v1.0) [7538A001AA]

System Software: [FE1-5601-000]

imagePASS C1 (v1.1.1) [7792A001AA] (for iR-C3200 System Software v11.03 or before)

System Software: [FE1-5768-020]

ImagePASS C1 (v2.0) [7792A007AA] (for iR-C3200 & iR-C3220 System Software v54.01 or
later)
System Software: [FE1-5928-000]

imagePASS C1 (v2.1) [7792A007AA] (for iR-C3200 & iR-C3220 System Software

v55.02 or later)
System Software: [FE1-5972-000]

imagePASS C1 (v2.1.2) For iR-C3200, iR-C3220 & iR-C2620 System Software

v81.01 or later)
System Software: [Patch upgrade only (File= irC1_v212sys_data.exe)] Will upgrade C1 from
v2.1 to v2.1.2: See TP05 235.pdf for details]

imagePASS D1 (v) 2.0 [8722A001AA]

System Software: [FE1-5926-000]
,
imagePASS D1 (v) 2.1 [8722A001AA] Compatible with CiR5800 & CiR-6800
System Software: [FE1-5974-000]

imagePASS E1 (v) 2.01 [8721A007AA]]

System Software: [FE1-5924-000]
17
 imageCLASS
imageCLASS C2500
System Firmware: 1.10a
Scanner Firmware: 0.30
Language Files: E1.4
Printer Profile: 1.0

imageCLASS C3500
System Firmware: 1.11a
Scanner Firmware: 0.30
Language Files: E1.6
Printer Profile: 1.0

LaserCLASS
LC710 (With optional Printer & Network Kit installed)
ROM Version: USA-33-01
IC1: HH4-3782-050
IC2: HH4-3793-050

Note: The Transfer function in ROM version USA-32-01 is not supported. Use USA-33-01
instead.

LC720i / 730i (Ships with Printer & Network Kit already installed)
ROM Version: USA-33-01
IC1: HH4-3782-050
IC2: HH4-3793-050

Note: The Transfer function in ROM version USA-32-01 is not supported. Use USA-33-01
instead.

18