Product Data Sheet: DEHNguard modular

DG M WE 600 FM (952 307)

Prewired complete unit consisting of a base part and plug-in protection modules
High discharge capacity due to heavy-duty zinc oxide varistors / spark gaps
High reliability due to "Thermo Dynamic Control" SPD monitoring device

Figure without obligation

Basic circuit diagram DG M WE 600 FM Dimension drawing DG M WE 600 FM

Modular three-pole surge arrester for use in wind turbines with a rated varistor voltage Umov = 750 V a.c.; FM version with floating remote signalling
contact.
Type DG M WE 600 FM
Part No. 952 307
SPD according to EN 61643-11 / IEC 61643-11 type 2 / class II
Nominal voltage (a.c.) (UN) 480 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) (UC) 600 V (50 / 60 Hz)
Rated varistor voltage (Umov) 750V
Nominal discharge current (8/20 s) (In) 15kA
Max. discharge current (8/20 s) (Imax) 25kA
Voltage protection level (UP) 3kV
Voltage protection level at 5 kA (UP) 2.5kV
Response time (tA) 25ns
Max. mains-side overcurrent protection 100A gG
Short-circuit withstand capability for max. mains-side overcurrent
protection (ISCCR) 25kArms
Temporary overvoltage (TOV) (UT) Characteristic 900 V / 5 sec. withstand
Temporary overvoltage (TOV) (UT) Characteristic 915 V / 120 min. safe failure
Operating temperature range (TU) -40 C ... +80 C
Operating state / fault indication green / red
Number of ports 1
2
Cross-sectional area (min.) 1.5 mm solid / flexible
2 2
Cross-sectional area (max.) 35 mm stranded / 25 mm flexible
For mounting on 35 mm DIN rails acc. to EN 60715
Enclosure material thermoplastic, red, UL 94 V-0
Place of installation indoor installation
Degree of protection IP 20
Capacity 3module(s), DIN 43880
Approvals KEMA, UL
Type of remote signalling contact changeover contact
Switching capacity (a.c.) 250 V / 0.5 A
Switching capacity (d.c.) 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
2
Cross-sectional area for remote signalling terminals max. 1.5 mm solid / flexible
Weight 388g
Customs tariff number 85363030
GTIN 4013364113312
PU 1pc(s)

We reserve the right to introduce changes in performance, configuration and technology, dimensions, weights and materials in the course of technical progress. The figures are shown without obligation.

DEHN + SHNE GmbH + Co. KG Hans-Dehn-Str. 1 Postfach 1640 D-92306 Neumarkt Tel. +499181 906-0 www.dehn.de

3, te
s ted
: Tested +: New (: Discontinued Model