FMS-200
Flexible integrated assembling systems
SMC
The Training
Solution The solution for
your company's
training needs in
the area of
automation.
SMC
INTERNATIONAL TRAINING
SMC International Training was conceived Conceived and designed by an expert
with the specific purpose of developing training team of technicians and trainers, it enables the
resources that improve the training and skills skills demanded by industry to be developed by
development of qualified technicians in the area combining the varied technologies related to
of AUTOMATION. the field of AUTOMATION.
The FMS 200 system is a clear example The modular approach allows it to be
of this objective. adapted to each clients needs and budget
and also to grow in time.
Training programme for the development
of professional skills.
Analysis
Installation / Assembly
Troubleshooting diagnosis and repair
Design
Understanding and drawing up of documentation
Integration of automation technology.
Safety: Compliance with CE standards.
Modularity.
Robustness: Highest quality industrial materials used.
Station 6 SAI 0600
Modularity Screws supply module Station 7 SAI 0700
Robotized screwing module
Station 8 SAI 0800
Storage module
Station 5 SAI 0500
Module of selection - fitting of cover
Assembled mechanism
Transfer module SAI 0900
SMC
INTERNATIONAL TRAINING
Station 4 SAI 0400
Module of selection-fitting of shaft
Mechanism parts
Station 3 SAI 0300 Station 1 SAI 0100
Module of hydraulic pressing
Station 2 SAI 0200 Body supply module
of bearings Bearing supply module
Technology All the didactic
Configuration
documentation
Integration supplied with the
system is
oriented to the
Examples
developement of
The FMS 200 system is designed in such a way the user may study the different professional skills The modular design of the FMS - 200 system allows
technologies within the field of automation in a practical context by getting to grips with
both the functions and applications of the different components. for several optinal configurations, ranging from the independent
use of each station right up the complete solution of all eight
modules plus the transfer. All options allow for growth over a
period of time.
In the area of pneumatic and
electropneumatic technology there Sensors are found in practically all
are many different types of drivers the stations with a wide range of uses
(single, double action cylinders, rodless, (inductive, capacitive, reed, Configuration
linear rotation, indexing plates, etc...)
and controls (valves and solenoid-valves
potentiometer, encoder, photoelectric,
etc.)
1 work station
in groups or independently) which have
a wide range of applications. All of these 5
are studied in detail.
All the stations are interconnected with
the master PLC through an industrial 8
communication bus, and they can 6
Configuration
operate at different levels depending 4 work stations
on the configuration chosen.
SMC
INTERNATIONAL TRAINING
One of the stations is based
on hydraulic technology and it includes 1
the power unit, cylinder and controls 4
for independent use.
All the stations include an independent
and easily removed control panel. This
enables the skills related to automated
devices and electrical panels to be
developed. 5 7 8
Configuration
Electrotechnic power systems 6 work stations
are present in both the transfer module,
driven by an asynchronous motor, and
the storage module in which the shafts
are driven by brushless motors.
The robotised screwing station enables 3 1
the concepts behind industrial robotics 4
to be analysed.
5 6 7 8
Each station incorporates a
programmable controler or PLC,
which allows the configuration and The option of adding a SCADA
instructions to be studied as well as (Supervision, Control and Data
the programming of these applicances Adquisition) allows for the possibility Configuration
which are so widely used in all of monitorising the process and linking 8 work stations
automation processes. up with production management
modules.
4 3 2 1
SMC
www.smctraining.com
