MIV PRODUCT OVERVIEW

VALVES

Gate valves
Butt
Butt erfly check valves
Butterfly valves
valves
Swing check valves
Air valves
Hydrants
Dismantling joints, filters and flap valves
Drilling saddles

FITTINGS

Flanged fittings
Fittings with TJ-
TJ - socket
Fittings for plastic and HDPE pips
Fast connection fittings
METAL SEATED GATE VALVES WITH OVAL,
OVAL, FLAT AND ROUND BODY AND RESILIENT
RESILIENT SEATED GATE VALVE

APPLICATION AND CONSTRUCTION

Gate valves face-to-face dimensions F4, F5, F15 DIN 3202 are used as stop valves in
pipelines. Flow interruptions arise when wedge is sliding down the body vertically to
flow direction. Invisible wedge, used as a closing system, is made with rigid sealing
surfaces. The wedge construction enables the valve to seal regardless to eventual
deformations of the body. Wedge rises and falls by revolving of axial immobile stem
with inside thread in the wedge nut. Sealing surfaces in the body and wedge are with
slight slope, which enables the valve to be built in regardless to the direction of flow.
Stuffing boxes are made in upper side of valve with square graphite ring or O rings.

V2-05 V3-01 V2-01 V2-05 with electromotr

TABLE OF GATE VALVE TYPES

max.
face to face body body wedge
model no. DN PN temp. flange drilling outside screw actuating coating
dimension shape material material
m edium*
edium *
V1- V1-
V1-07 is a model of V1-
V1-
V1-07 40-
40-1600 10/6/4/2,5/1,6/1 70C
70C flat
EN 1092-
1092 -2 , ANSI, 08 with outside screw

GGG, GGG+hard rubber, SS (1.4301, 1.4571,

V1-
V1-08 40-
40-1600 10/6/4/2,5/1,6/1 70C
70C EN 558-
558-1 series 14 flat
AWWA and ect.

epoxy powder coating, min. 250 , RAL 5015/RAL 5005

no
V1-
V1-08/02 40-
40-1600 16/10/6/4/2,5/1,6 70C
70C flat

1.4462 and others), bronze

handwheel, electromotor, hydraulic and pneumatic
V1-
V1-10 50-
50-1600 10/16 70C
70C EN 1092-
1092 -2 , ANSI, BS 5163 BS
possibility
V1-
V1-10/01 80-
80-600 25 70C
70C AWWA, BS and ect. BS 5163 BS
V2-
V2 -01 40-
40-1600 10/16 70C
70C oval
no
V2-
V2 -01/01 40-
40-600 25 70C
70C oval
EN 558-
558-1 series
series 15
V2-
V2 -02 40-
40-1600 10/16 70C
70C V2-
V2 -02 is a model of V2-
V2 - oval

GGG
V2-
V2 -02/01 40-
40-600 25 70C
70C EN 1092-
1092 -2 , ANSI, 01 with outside screw oval
V3-
V3-01/01 40-
40-1000 25 70C
70C AWWA and ect. DIN 3020 (F15) round
V3-
V3-01/02 40-
40-600 40 70C
70C DIN 3020 (F15) round
V2-
V2 -05 50-
50-600 10/16 70C EN 558-
558-1 series 14 elliptic
V2-
V2 -05/01 50-
50-200 25 70C (F4) elliptic

GGG+EPDM
possibility
EN 1092-
1092 -2 , ANSI,
V2-
V2 -05/B 50-
50-400 10/16 70C BS 5163 BS
AWWA, BS and ect.
V2-
V2 -07 50-
50-600 10/16 70C EN 1092-
1092 -2 , ANSI, EN 558-
558-1 series 15 elliptic
V2-
V2 -07/01 50-
50-200 25 70C AWWA and ect. (F5) elliptic
* bolded - standard Gate valve design
* not bolded- no-standard Gate valve design
* higher max. temp. of the medium on request
SWING CHECK VALVES

APPLICATION AND CONSTRUCTION

Swing check valve is a shut-off device allowing media to flow in one direction only. The disc is opened by the flow of
media, and closed by its own weight, load weight and back flow of media. Swing check valve always has a lever and
weight fitted on its left side looking in the flow direction. Swing check valve can be operated by damping device that
enables smooth closing to avoid hydraulic shock in pipeline. Swing check valve can be built in both horizontal and
vertical pipelines. Based on the installation and media flow, the lever and weight angle must be adjusted. In the body is
a disc revolving in eccentrically positioned bearings placed out of sealing surfaces. Due to the fact that the axis of
rotation is always on the gravity line of the upper half of the disc, with the total gravity centre below the axis and having
changeable position to flow direction, the disc will always tend to close.

V2-08 with lever and weight

TABLE OF SWING CHECK VALVE TYPES

max. temp. face to face body

model no. DN PN flange drilling actuating disc material coating
m edium*
edium * dimension material
without lever and weight
EN 1092-
1092 -2 , ANSI,
V2-
V2 -08 50-
50-1000 10/16 70C
70C with lever and weight
AWWA and ect.
with damper
without lever and weight

558--1 series 48,

EN 1092-
1092 -2 , ANSI, GGG, SS
V2-
V2 -08/01 50-
50-200 25 70C
70C with lever and weight
AWWA and ect. (1.4301, 1.4571, epoxy powder

BS 5153
with damper
GGG 1.4462 and coating, min. 250 ,,
without lever and weight
EN 1092-
1092-2 , ANSI, others), bronze RAL 5015/RAL 5005

EN 558
V2-
V2 -08/02 50-
50-200 40 70C
70C with lever and weight
AWWA and ect.
with damper
V2-
V2 -08/K-
08/K-with
EN 1092-
1092 -2 , ANSI, with lever and weight
protection 50-
50-1000 10/16/25/40 70C
70C
AWWA and ect. with damper
basket
* bolded - standard Swing check design
* not bolded- no-standard Swing check design
* higher max. temp. of the medium on request
BUTTERFLY CHECK VALVES

APPLICATION AND CONSTRUCTION

Butterfly check valve Priklopac is a shut-off device allowing media to flow in one direction only. The disc is
opened by the flow of media, and closed by its own weight, load weight and back flow of media. Butterfly check
valve always has a lever and weight fitted on its left side looking in the flow direction. Butterfly check valve can
be operated by damping device that enables smooth closing to avoid hydraulic shock in pipeline. Butterfly
check valve can be built in both horizontal and vertical pipelines. Based on the installation and media flow, the
lever and weight angle must be adjusted. In the tube shaped body is a disc revolving in eccentrically positioned
bearings places out of sealing surfaces. Maximum disc aperture is 85. Due to the fact that the axis of rotation is
always on the gravity line of the upper half of the disc, with the total gravity centre below the axis and having
changeable position to flow direction, the disc will always tend to close. By dividing the disc along the axis in two
different disc areas subjected to uniformly distributed water pressure, two opposite closing moments of
different values appear on the turning axes. In this way, the total closing moment is decreased resulting in a
considerably smoother disc stroke compared to standard check valve.

V2-09 with two dampers

TABLE OF BUTTEFLY CHECK VALVE TYPES

max. temp. body

m odel no
no DN PN flange drilling face to face dimension actuating body shape coating
m edium*
edium * material disc material

V2-
V2 -09 200-
200-1800 10/16 70C
70C EN 558-
558-1 series 14 GGG
GGG, SS (1.4301,
V2-
V2 -09/01 200-
200-800 25 70C
70C EN 558-
558-1 series 14 GGG epoxy
1.4571, 1.4462 and

double flanged
with lever and powder
V2-
V2 -09/02 200-
200-400 40 70C
70C EN 558-
558-1 series 14 GGG others), bronze
EN 1092-
1092 -2 , ANSI, weight, hydraulic coating, min.
V2-
V2 -09/V 150-
150-2000 10/16 70C
70C AWWA and ect. EN 558-
558-1 series 14 damper/two St-
St -welded St-
St -welded, SS (1.4301, 250 ,, RAL
hydraulic dampers 1.4571, 1.4462 and 5015/RAL
V2-
V2 -09/V/01 200-
200-1000 25 70C
70C EN 558-
558-1 series 14 St-
St -welded
others), bronze 5005
V2-
V2 -09/V/02 200-
200-400 40 70C
70C EN 558-
558-1 series 14 St-
St -welded
* bolded - standard Swing check design
* not bolded- no-standard Swing check design
* higher max. temp. of the medium on request
BUTTERFLY VALVES

APPLICATION AND CONSTRUCTION

Butterfly valve is a modern shut off and flow control device in pipelines and shipbuilding. It is
used in flow media up to 80C (in short terms up to 120C). Break off of the flow is achieved by
turning the disc tightly fastened on the stem. Reliable sealing is secured by hard leaning of the
disc on the body-sealing surface. Sealing gasket is on the valve disc. The ring that is fastened to
the disc with bolts holds it. When mounting the valve to the pipeline, sealing ring must be fully
tightened. That way the tightness between disc and sealing ring is increased and sealing fully
obtained.

V3-06 V3-09 V3-08

TABLE OF BUTTERFLY VALVE TYPES

max. temp. flange face to face body

model no.
no. DN PN actuating body material disc material coating
medium drilling dimension shape

V3-
V3- 06 100-
100- 2400 10/16 70C GGG GGG, stainless steel (SS
1.4301, 1.4571, 1.4462 and
V3-
V3- 06/01 100-
100- 1200 25 70C GGG
others), bronze epoxy powder
V3-
V3- 06/02 100-
100- 800 40 70C GGG coating, min. 250
V3-
V3- 06/V 100-
100- 3000 10/16 70C St-
St-welded St-
St-welded, stainless steel , RAL 5015/RAL

2501), ANSI, AWWA, UNI, DINA, ect.

(SS 1.4301, 1.4571, 1.4462 5005
V3-
V3- 06/V/01 on request 25 70C handwheel,
handwheel St-
St-welded
and others), bronze

558--1 series 14
electromotor

double flanged
V3-
V3- 06/V/02 on request 40 70C St-
St-welded
PN 10/16 (DN 2400)
100-
100- 2400 (GGG)
(GGG) PN 25 DN (1200) GGG/St-
GGG/St- painted with

EN 558
V3-
V3- 06/G PN 40 (DN 800) 70C welded+Ebonit GGG/St+Ebonit rubber epoxy two-
two-
PN 10/16 (DN 3000) rubber component colour
100-
100- 3000 (St)
PN 25/40 on request
1092--2 (DIN 2501)

PN 10/16 (DN 2400)

24 00) GGG, St-
St- welded,
100-
100- 2400 (GGG) PN 25 DN (1200) 200C stainless steel (SS
V3-
V3- 06/H PN 40 (DN 800) (GGG/St) electrohydraulic GGG/St-
GGG/St-welded 1.4301, 1.4571, 1.4462
PN 10/16 (DN 3000) 70
70 (Ebonit) and others), bronze
100-
100- 3000 (St) epoxy powder
EN 1092

PN 25/40 on request
coating, min. 250
V3-
V3- 07 50-
50- 600 10/16 70C lock lever (DN 50- 50- wafer GGG
GGG, stainless steel , RAL 5015/ RAL
EN 558-
558- 1 175), handwheel,
V3-
V3- 09 50-
50- 600 10/16 70C lug GGG (SS 1.4301, 1.4571, 5005
series 20 electromotor,
V3- 1.4462 and others),
V3-10 50-
50-500 10/16 70C hydraulic double- lug GGG
bronze
EN 558-
558- 1 acting rotary actuator
V3-
V3- 08 50-
50- 600 10/16 70C flanged GGG
series 13
*bolded - standard BFV design
* not bolded- no-standard BFV design
* higher max. temp. of the medium on request
AIR VALVES

APPLICATION AND CONSTRUCTION

The automatic air inlet-relief valve allows deareation during pipe line operation as well as entrance and
exit of air in the course of pipe line filling and empting, securing thereby an undisturbed pipe line
operation. The functioning is self-acting on the principle of ball buoyancy and pressure difference
between pipe line interior and atmosphere. The air inlet-relief valve consists of two chambers and a
shut-off valve in the center (only V6-01), which must be continually open during operation. The left
chamber is assigned for relief of small and the right one for inlet and relief of large volumes of air. The
air inlet-relief valve is located at the highest pipe line bends.

V6-01A V6-03A V6-02

TABLE OF AIR VALVE TYPES

max. temp. balls

model no
n o. DN PN flange drilling body material coating
medium material

V6-
V6-01 50-
50-200 10/16

V6-
V6-01A 50-
50-300 10/16

V6-
V6-01A/01 50-
50-200 25

V6-
V6-01A/02 50-
50-200 40

V6-
V6-02 50-
50-300 10/16 SS 1.4301,
1.4301 epoxy powder coating,
EN 1092-
1092 -2 , ANSI, AWWA GGG, SS (1.4301, 1.4571,
80C 1.4571 min. 250 ,, RAL
V6-
V6-02/01 50-
50-300 25 and ect. 1.4462)
5015/RAL 55005
005
V6-
V6-03 50-
50-80 10/16

V6-
V6-03/01 50-
50-80 25

V6-
V6-05A 80 10/16

V6-
V6-03A 50-
50-300 10/16

* bolded - standard Air valve design

* not bolded- no-standard Air valve design
UNDERGROUND AND SURFACE HYDRANT

APPLICATION AND CONSTRUCTION

The surface hydrant is installed on a water pipe for the purpose of taking water for fire
extinguishing or filling the water pipe system. This hydrant is installed nearby structures such as
hospitals, schools, theatres, industrial buildings, etc.
This hydrant is installed on a piping On account of its exclusive appearance this hydrant fits well with its surroundings being a
system for various purposes, as for decoration on public spaces especially in hearts of the old towns.
example street washing, green area The hydrant is designed so that in case of an impact only the column breaks at a specified place
watering etc. The installation is in the upper portion, while the hydrant valve remains in closed position. Only the specific hydrant
carried out almost under the ground part must be replaced in this case.
surface itself, so its application is
The surface hydrant can be delivered without drainage valve. The water rest is exhausted with a
restricted to areas where freezing
hand pump. This design suits areas with high level of underground water.
does not come on.
For the connection of a fire brigade hose, hydrants DN 80 are provided with two upper C-
couplings ( 50) according to DIN 14317 and one bottom B-coupling ( 65) according to DIN
14318.
V4-01 For the connection of a fire brigade hose, hydrants DN 100 are provided with two upper B-
couplings ( 65) according to DIN 14318 and one bottom A-coupling ( 100) according to DIN
V4-11 14319.

TABLE OF HYDRANT TYPE

TYP ES

max. temp. body

model no
n o. DN height PN type coating
medium material

V4-
V4-01 80 1,25/0,75 10/16 underground

V4-
V4-01/1 100 ----- 10/16 underground

V4-
V4-02 50 1,25/0,75 10/16 underground
bitumen/epoxy
bitumen/ powder,
V4-
V4-04 50 ----- 10/16 underground min 250 , RAL
5015/5005
V4-
V4-05 100-
100-125 ----- 10/16 70C for irrigation GGG
V4-
V4-06 100-
100-150 ----- 10/16 for irrigation

V4-
V4-16A 80 ----- 10/16 underground acc. to BS 750

V4-
V4-11 80-
80-100 1,00/1,25/1,50 10/16 surface epoxy powder
coating, min. 250 ,,
V4-
V4-17-
17-NEW DESIGN 80 ----- 10/16 surface RAL 5015
INLET STRAINERS, FLAP CHECK VALVES, DISMANTLING JOINTS

V7-01/2 V7-03 V7-10C V7-10F

TABLE OF INLET STRAINERS, FLAP CHECK VALVE AND DISMANTLING JOINT TYPES

strainer material (for inlet strainers)

model no
n o. DN PN type body material coating
bolts and nuts material for (dismantling joints)

INLET STRAINERS

V7-
V7-01 50-
50-600 10 without valve 8.8 galvanized,
galvanized, SS (1.4301, 1.4571, 1.4462) GGG

V7-
V7-01/01 50-
50-1000 10 without valve 8.8 galvanized,
galvanized, SS (1.4301, 1.4571, 1.4462) St-
St -welded epoxy powder coating,
coating, min.
250 , RAL 5015/5005
50-
50-350 2,5
V7-
V7-01/2 with valve 8.8 galvanized,
galvanized, SS (1.4301, 1.4571, 1.4462) GGG
400-
400-600 1

FLAP CHECK VALVES

V7-
V7-03 50-
50-600 10/16
10/16 ----- ----- GGG
400-
400-1200 epoxy powder coating, min.
V7-
V7-03/01 10/16 ----- ----- St-
St-welded 250 , RAL 5015/5005
(bigger DN on request)
400-
400-1200
V7-
V7-03/02 10/16 with lever ----- St-
St -welded
(bigger DN on request)
DISMANTLING JOINTS (MDK type)

V7-
V7-10 200
200-1000 10/16 ----- 8.8 galvanized+A2, A2+A4 St-
St -welded

V7-
V7-10B 500-
500-2200 10/16 ----- 8.8 galvanized+A2, A2+A4 St-
St -welded

40-
40-1200 10/16 ----- 8.8 galvanized+A2, A2+A4 epoxy powder coating, min.
V7-
V7-10C GGG
40-
40-1000 25 ----- 8.8 galvanized+A2,
galvaniz ed+A2, A2+A4 250 , RAL 5015/5005

V7-
V7-10D 40-
40-1000 10/16 ----- 8.8 galvanized+A2, A2+A4 GGG

V7-
V7-10F 80-
80-300 10/16 ----- 8.8 galvanized+A2, A2+A4 GGG

*bolded - standard design

* not bolded- no-standard design
DRILLING SADDLES

TABLE OF DRILLING SADDLE TYPE

TYPES

connection max. temp. body application

model no. DN PN type coating
dimensions medium material (pipe material)

V5-
V5-03 40-
40-300 1, 1 , 2 10/16 with valve cast and steel

V5-
V5-04 40-
40-300 1, 1 , 2 10/16 with valve and installation equipment cast and steel

V5-
V5-07 63-
63-315 1, 1 , 1 , 2 10/16 without valve plastic pipes

V5-
V5-09 63-
63-225 1, 1 , 2 10/16 with valve plastic pipes
pipe s
epoxy powder
V5-
V5-10 63-
63-225 1, 1 , 2 10/16 70C with valve and installation equipment GGG plastic pipes coating,
coat ing, min. 250 ,,
RAL 5015/RAL 5005
V5-
V5-12A 80-
80-300 1, 1 , 1 10/16 MIV type-
type -with valve cast and steel

V5-
V5-12E 80-
80-300 1, 1 , 1 10/16 MIV type-
type -without valve cast and steel

V5-
V5-12F 40-
40-65 1, 1 , 1 10/16 without valve cast and steel

V5-
V5-17 63-
63-315 1, 1 , 1 10/16 with valve plastic pipes
FLANGED FITTINGS

TABLE OF FLANGED FITTINGS

art no. DN PN material coating

F 40-
40-1200

Q 90
90 50-
50 -800

N 90
90 50-
50 -600

FFK 45
45 50-
50 -800

FFK 30
30 50-
50 -800

FFK 22
22 50-
50 -800

FFK 11
11 50-
50 -800
bitumen/epoxy powder,
10/16/25 GGG min. 250 ,, RAL
60/50-
60/50 - 5015/5005
T
1200/1000

X 60-
60 -1200

80/80-
80/80 -
TT
700/700

50/40-
50/40 -
FFR
700/600

40/100-
40/100 -
FF
1200/5000

60/40-
60/40 -
XR
600/450

40-
40 -100-
100 -
FFM
1200/5000
without coating,
epoxy powder, min.
FFS *on request *on request St-
St -welded
250 ,, RAL 5015/5005
5015/5005
FITTINGS WITH TJ-
TJ-SOCKET

TABLE OF FITTINGS WITH TJ-

TJ - SOCKET

art no. DN PN material coating

EU-
EU -TJ 60-
60 -600

MMK 11
11 60-
60 -1200

MMK 22
22 60-
60 -1200

MMK 30
30 60-
60 -1200

MMK 45
45 60-
60 -1200

MMQ 90
90 60-
60 -1200
epoxy powder, min. 250 ,,
10/16 GGG
RAL 5015/5005
EN-
EN -TJ 80-
80 -100

MMR 80/60-
80/60 -800/700

MMB 60/60-
60/60 -300/300

MMA 60/50-
60/50 -1200/1000

U -TJ 1200

* PN 25 on request
FITTINGS FOR PLASTIC AND HDPE PIPES

TABLE OF FITTINGS FOR PLASTIC AND HDPE PIPES

art no. DN PN material coating

E -KS 50-
50 -500

F-KS 50-
50 -500

MMA-
MMA-KS 50/50-
50/50 -300/300

EN-
EN -KS 80-
80 -100

e poxy powder, min. 250 ,, RAL

10/16/25 GGG
5015/5005
E -HDPE 50-
50 -400

MMA-
MMA-HDPE 50/50-
50/50 -300/300

U -HDPE 63-
63-315 (diameter of pipe)

EN-
EN -HDPE 80-
80 -100
FAST CONNECTION FITTINGS

TABLE OF FAST CONNECTION FITTINGS

art no. DN PN material coating

E -BS 50-
50 -600B

epoxy powder, min. 250 ,

10/16/25 GGG
RAL 5015/5005
U -BS 50-
50 -400B