CD4512BM/CD4512BC 8-Channel Buffered Data Selector

February 1988

CD4512BM/CD4512BC 8-Channel Buffered Data Selector

General Description Features
The CD4512BM/CD4512BC buffered 8-channel data selec- Y Wide supply voltage range 3.0V to 15V
tor is a complementary MOS (CMOS) circuit constructed Y High noise immunity 0.45 VDD (typ.)
with N- and P-channel enhancement mode transistors. This Y TRI-STATE output
data selector is primarily used as a digital signal multiplexer Y Low quiescent power dissipation 0.25 mW/package
selecting 1 of 8 inputs and routing the signal to a TRI- (typ.) @ VCC e 5.0V
STATE output. A high level at the Inhibit input forces a low Y Plug-in replacement for Motorola MC14512
level at the output. A high level at the Output Enable (OE)
input forces the output into the TRI-STATE condition. Low
levels at both the Inhibit and (OE) inputs allow normal oper-
ation.

Connection Diagram and Truth Table

Dual-In-Line Package

Order Number CD4512B

TL/F/5993 1
Top View

Address Inputs Control Inputs Output

C B A Inhibit OE Z
0 0 0 0 0 X0
0 0 1 0 0 X1
0 1 0 0 0 X2
0 1 1 0 0 X3
1 0 0 0 0 X4
1 0 1 0 0 X5
1 1 0 0 0 X6
1 1 1 0 0 X7
j j j 1 0 0
j j j j 1 Hi-Z
j e Dont care
Hi-Z e TRI-STATE condition
Xn e Data at input n

TRI-STATE is a registered trademark of National Semiconductor Corporation.

C1995 National Semiconductor Corporation TL/F/5993 RRD-B30M105/Printed in U. S. A.

 Absolute Maximum Ratings (Notes 1 & 2) Recommended Operating
If Military/Aerospace specified devices are required, Conditions (Note 2)
please contact the National Semiconductor Sales
DC Supply Voltage (VDD) 3.0 to 15 VDC
Office/Distributors for availability and specifications.
Input Voltage (VIN) 0 to VDD VDC
Supply Voltage (VDD) b 0.5 to a 18 VDC
Operating Temperature Range (TA)
Input Voltage (VIN) b 0.5 to VDD a 0.5 VDC
CD4512BM b 55 C to a 125 C
Storage Temperature Range (TS) b 65 C to a 150 C CD4512BC b 40 C to a 85 C
Power Dissipation (PD)
Dual-In-Line 700 mW
Small Outline 500 mW
Lead Temperature, (TL)
(Soldering, 10 seconds) 260 C

DC Electrical Characteristics CD4512BM (Note 2)

b 55 C a 25 C a 125 C
Symbol Parameter Conditions Units
Min Max Min Typ Max Min Max
IDD Quiescent Device VDD e 5V, VIN e VDD or VSS 5.0 0.005 5.0 150 mA
Current VDD e 10V, VIN e VDD or VSS 10 0.010 10 300 mA
VDD e 15V, VIN e VDD or VSS 20 0.015 20 600 mA
VOL Low Level VDD e 5V 0.05 0 0.05 0.05 V
Output Voltage VDD e 10V
VDD e 15V ( lIOLl k 1 mA 0.05
0.05
0
0
0.05
0.05
0.05
0.05
V
V
VOH High Level VDD e 5V 4.95 4.95 5.0 4.95 V
Output Voltage VDD e 10V
VDD e 15V (l IOHl k 1 mA 9.95
14.95
9.95
14.95
10.0
15.0
9.95
14.95
V
V
VIL Low Level VDD e 5V, VO e 0.5V 1.5 2.25 1.5 1.5 V
Input Voltage VDD e 10V, VO e 1.0V 3.0 4.50 3.0 3.0 V
VDD e 15V, VO e 1.5V 4.0 6.75 4.0 4.0 V
VIH High Level VDD e 5V, VO e 4.5V 3.5 3.5 2.75 3.5 V
Input Voltage VDD e 10V, VO e 9.0V 7.0 7.0 5.50 7.0 V
VDD e 15V, VO e 13.5V 11.0 11.0 8.25 11.0 V
IOL Low Level Output VDD e 5V, VO e 0.4V 0.64 0.51 0.78 0.36 mA
Current (Note 3) VDD e 10V, VO e 0.5V 1.6 1.3 2.0 0.9 mA
VDD e 15V, VO e 1.5V 4.2 3.4 7.8 2.4 mA
IOH High Level Output VDD e 5V, VO e 4.6V b 0.25 b 0.2 b 0.14 mA
Current (Note 3) VDD e 10V, VO e 9.5V b 0.62 b 0.5 b 0.35 mA
VDD e 15V, VO e 13.5V b 1.8 b 1.5 b 1.1 mA
IIN Input Current VDD e 15V, VIN e 0V b 0.1 b 10 b 5 b 0.1 b 1.0 mA
VDD e 15V, VIN e 15V 0.1 10b5 0.1 1.0 mA
IOZ TRI-STATE VDD e 15V, VO e 0V b 10 b 5
g 0.1 g 0.1 g 3.0 mA
Output Current VDD e 15V, VO e 15V

DC Electrical Characteristics CD4512BC (Note 2)

b 40 C a 25 C a 85 C
Symbol Parameter Conditions Units
Min Max Min Typ Max Min Max
IDD Quiescent Device VDD e 5V, VIN e VDD or VSS 20 0.005 20 150 mA
Current VDD e 10V, VIN e VDD or VSS 40 0.010 40 300 mA
VDD e 15V, VIN e VDD or VSS 80 0.015 80 600 mA
VOL Low Level VDD e 5V 0.05 0 0.05 0.05 V
Output Voltage VDD e 10V
VDD e 15V ( lIOLl k 1 mA 0.05
0.05
0
0
0.05
0.05
0.05
0.05
V
V
VOH High Level VDD e 5V 4.95 4.95 5.0 4.95 V
Output Voltage VDD e 10V
VDD e 15V (l IOHl k 1 mA 9.95
14.95
9.95
14.95
10.0
15.0
9.95
14.95
V
V
VIL Low Level VDD e 5V, VO e 0.5V 1.5 2.25 1.5 1.5 V
Input Voltage VDD e 10V, VO e 1.0V 3.0 4.50 3.0 3.0 V
VDD e 15V, VO e 1.5V 4.0 6.75 4.0 4.0 V

2
 DC Electrical Characteristics CD4512BC (Note 2) (Continued)
b 40 C a 25 C a 85 C
Symbol Parameter Conditions Units
Min Max Min Typ Max Min Max
VIH High Level VDD e 5V, VO e 4.5V 3.5 3.5 2.75 3.5 V
Input Voltage VDD e 10V, VO e 9.0V 7.0 7.0 5.50 7.0 V
VDD e 15V, VO e 13.5V 11.0 11.0 8.25 11.0 V
IOL Low Level Output VDD e 5V, VO e 0.4V 0.52 0.44 0.78 0.36 mA
Current VDD e 10V, VO e 0.5V 1.3 1.1 2.0 0.9 mA
(Note 3) VDD e 15V, VO e 1.5V 3.6 3.4 7.8 2.4 mA
IOH High Level Output VDD e 5V, VO e 4.6V b 0.2 b 0.16 b 0.12 mA
Current VDD e 10V, VO e 9.5 b 0.5 b 0.4 b 0.3 mA
(Note 3) VDD e 15V, VO e 13.5V b 1.4 b 1.2 b 1.0 mA
IIN Input Current VDD e 15V, VIN e 0V b 0.3 b 10 b 5 b 0.3 b 1.0 mA
VDD e 15V, VIN e 15V 0.3 10b5 0.3 1.0 mA
IOZ TRI-STATE VDD e 15V, VO e 0V
g 1.0 g 10 b 5 g 1.0 g 7.5 mA
Output Current VDD e 15V, VO e 15V

AC Electrical Characteristics* TA e 25 C, tr e tf e 20 ns, CL e 50 pF

CD4512BM CD4512BC
Symbol Parameter Conditions Units
Min Typ Max Min Typ Max
tPHL Propagation Delay VDD e 5V 225 500 225 750 ns
High-to-Low Level VDD e 10V 75 175 75 200 ns
VDD e 15V 57 130 57 150 ns
tPLH Propagation Delay VDD e 5V 225 500 225 750 ns
Low-to-High Level VDD e 10V 75 175 75 200 ns
VDD e 15V 57 130 57 150 ns
tTHL, tTLH Transition Time VDD e 5V 70 200 70 200 ns
VDD e 10V 35 100 35 100 ns
VDD e 15V 25 80 25 80 ns
tPHZ, tPLZ Propagation Delay into VDD e 5V 50 125 50 125 ns
TRI-STATE from Logic Level VDD e 10V 25 75 25 75 ns
VDD e 15V 19 60 19 60 ns
tPZH, tPZL Propagation Delay to Logic VDD e 5V 50 125 50 125 ns
Level from TRI-STATE VDD e 10V 25 75 25 75 ns
VDD e 15V 19 60 19 60 ns
CIN Input Capacitance (Note 4) 7.5 15 7.5 15 pF
COUT TRI-STATE Output (Note 4)
7.5 15 7.5 15 pF
Capacitance
CPD Power Dissipation Capacity (Note 5) 150 150 pF
*AC Parameters are guaranteed by DC correlated testing.
Note 1: Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The tables of Recommended Operating Conditions and Electrical Characteristics provide conditions for actual device
operation.
Note 2: VSS e 0V unless otherwise specified.
Note 3: IOH and IOL are tested one output at a time.
Note 4: Capacitance guaranteed by periodic testing.
Note 5: CPD determines the no load AC power of any CMOS device. For complete explanation, see 54C/74C Family Characteristics Application Note, AN-90.

3
Logic Diagram

TL/F/5993 2

Typical Application
Serial Data Routing Interface

TL/F/5993 3

4
AC Test Circuit and Switching Time Waveforms

TL/F/5993 5

TL/F/5993 4

Input Connections for tr, tf, tPLH, tPHL

Test Inhibit A X0
1 PG GND VDD
2 GND PG VDD
3 GND GND PG

TRI-STATE AC Test Circuit and Switching Time Waveforms

TL/F/5993 7

TL/F/5993 6

Switch Positions for TRI-STATE Test

Test S1 S2 S3 S4
tPHZ Open Closed Closed Open
tPLZ Closed Open Open Closed
tPZL Closed Open Open Closed
tPZH Open Closed Closed Open

5
CD4512BM/CD4512BC 8-Channel Buffered Data Selector
Physical Dimensions inches (millimeters)

Ceramic Dual-In-Line Package (J)

Order Number CD4512BMJ or CD4512BCJ
NS Package Number J16A

Molded Dual-In-Line Package (N)

Order Number CD4512BMN or CD4512BCN
NS Package Number N16E

LIFE SUPPORT POLICY

NATIONALS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor

Corporation Europe Hong Kong Ltd. Japan Ltd.
1111 West Bardin Road Fax: (a49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309
Arlington, TX 76017 Email: cnjwge @ tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408
Tel: 1(800) 272-9959 Deutsch Tel: (a49) 0-180-530 85 85 Tsimshatsui, Kowloon
Fax: 1(800) 737-7018 English Tel: (a49) 0-180-532 78 32 Hong Kong
Fran3ais Tel: (a49) 0-180-532 93 58 Tel: (852) 2737-1600
Italiano Tel: (a49) 0-180-534 16 80 Fax: (852) 2736-9960

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
This datasheet has been downloaded from:

www.DatasheetCatalog.com

Datasheets for electronic components.

 National Semiconductor was acquired by Texas Instruments.
http://www.ti.com/corp/docs/investor_relations/pr_09_23_2011_national_semiconductor.html

This file is the datasheet for the following electronic components:

CD4512 - http://www.ti.com/product/cd4512?HQS=TI-null-null-dscatalog-df-pf-null-wwe