8mm dia 125mm c/c radial

0.7m from end of the projection CI man hole

0.60x0.60m 8mm @ 125 c/c Circumferential
8mm dia 125mm c/c circumfertail 2Nos
Top slab(125)
Top Slab
Projection
r Phenail with
fly proof v ntilator
8mm I @ 125 c/c Radial bars
150 amok
--moss
0.75m length
1125
Bel-I- outh
I
Steps300c/c
150
8 mm 150/c
2000 Vertical irvie& outerface
190C
Top mesh bothways 8 mm 150c/c
10 mm (4. 150 c/c Hoop rings inner
RCCladder
1 Omm0150c/c & outer face
hanch bars 400mm wide
150
G 150
/A\ ID 150 CC(1:4:8)
Sand filling 7 150 Sand filling
Ld 15Q
2600
Bottom mesh bothways
10 mm 150 c/c
Note:-
SCHEME :
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415 tv dA. On ...and'
, Tr VC.

3. Clear minimum cover

slabs :45MM
side walls :45MM 5 KL GLSR
4. SBC : 10T/SOM
5. All dimensions are in 'mm' unless specified.
6. The Steel should not be overlapped
at the junction points
7. Not more than 1/3rd of the bars should
be curtailed at a given section
 10mm dia 150mm C/C Radial CI man hole
0.9m from end of projection 0.60x0.60m
2Nos
8mm dia 150 mm C/C Top slab(125)
Phenail with
Top Slab circumferential fly proof v ntilator
Projection 00
150

outh

Steps300c/c /
150
10 mm 150/c

3000 Vertical inner & outerface

190C Top mesh bothways 8 mm 150c/c

10 mm 150 c/c Hoop rings inner
RCCladder
1 Omm01 50c/c & outer face
hunch bars 400mm wide
150 I
200
A. : ". 150 CC(1:4:8)
Sand filling $150 Sand filling
Ld 0
3600
Bottom mesh bothways
10 mm 150 c/c

Note:- SCHEME :
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slabs :45MM
side walls :45MM 10 KL GLSR
4. SBC : 10T/SOM
5. All dimensions are in 'mm' unless specified.
6. The Steel should not be overlapped
at the junction points
7. Not more than 1/3rd of the bars should
be curtailed at a given section
Conditions:
1.Grade of Concrete: M30
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
side walls :45mm
Top&Bottoam slabs:45mm

Footings :50mm
4.All dimensions are in 'mm' unless specified
5.The steel should not be overlapped at the junction points
6.Not more than 1/3rd of the bars should be curtailed at a given
7.Provide RCC stair case-M30 with RCC railing
 5200

10 V150c/c BOTH FACES of Vertical

10'01500c BOTH FACES

DETAIL 'P' CIRCUMFERENTIAL
G.L G.L
300X2500 Top mesh bothways 12mm@l00c/c Mesh //X\N

-r-

.C.0 004j3)- " 4.

8200
12 yg 100c/c CIRCULAR Bottom Mesh bothways 251@100c/c MESH
RINGS UPTO 1.30M FROM
OUTER EDGE

SECTIONAL ELEVATION OF RAFT

121 @100c/c MESH 25 1100c/c MESH

1 1111111 110
1111
111111111111111111111/1/1
INIEREEKSEPTE
11111111111111111111111
11111111 11111//'
111111111111111111W
1111111111111111r
111111ETIO'
1.1W 12 -(0100c/c CIRCULAR
RINGS UPTO 1.30M FROM
OUTER EDGE

TOP REINFORCEMENT BOTTOM REINFORCEMENT

NJ
0
10 -1@150 BOTH FACES Conditions:
1.Grade of Concrete: M30
VERTICAL IN SHAFT
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
101@150 BOTH FACES side walls :45mm
CIRCUMFERENTIAL Top&Bottoam slabs:45mm
10!@150 BOTH FACES Columns :45mm
Footings :50mm
300X2500 4.All dimensions are in 'mm' unless specified
5.The steel should not be overlapped at the
Junctions
6.Not more than 1/3rd of the bars should be
2 50o curtailed at a given section

300

600
g* 60
I
' 71 1 5
L.!
:C.0 (1:4:8) .
40KL O.H.B.R SHAFT
DETAIL 'P' 25.00 M STAGING
SBC OF SOIL 18T/M2
8 @150c/c bothways upto 1000

R=8910
0

2L-8 @200c/c 8 @150c/c as meridonial and circumferential ste Curtail Alt. Bars of
meridonial reinforcement @ 2.0mt from edge and ain curtail alternate
bars @ 3.0mt from edge. The remaining bars contin e

R=3925

<Y160 C 10 @ 150 c/c hoops Inner & Outer

0

200
8@ 1 30 bothways

8 @150 c/c inclined staggered

8 150c/c as meridonial and circumferential
steel, curtail alternate bars @1.30mt from 0
edge and again curtail alternate bars @2.0mt
from edge. The r-emainingars continue

AOOL Ul

/011 1161b.

45
,, 'TOP
lL
R=4920
)

0 4Y1210-i-44-1-20

. S 1 2 t Bertovr)

300
2L-8T@200c R=2600

200

Conditions:
1.Grade of Concrete: M30
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
side walls :45mm AP irIc1):c_d( 1
Top&Bottoam slabs:45mm
Columns :45mm
Footings :50mm
4.All dimensions are in 'mm' unless specified
5.The steel should not be overlapped at the
junctions
6.Not more than 1/3rd of the bars should be /o )jj
curtailed at a given section

Wind Speed 45m/sec

40KL OHBR-Shaft 25mt Stg.

SBC of Soil 18t/m2
 10mm @ 150 _ cfcRadial
m
from end of projection CI man holes
0.9'm 2Nos
Top Slab Top slab(150)
Projection 8mm @ 150 c/c
Circumferential
Phenail with
r
fly proof v ntilator
150

Betl/nouth
9 00

7
G.1 Steps@300c/c
10mm @ 150 c/c 150
A\ Both ways 10 mm @ 150/c

3000 Vertical4 outerface

100
Top mesh bothways 8 mm 150c/c
10 mm @ 150 c/c Hoop rings
RCCIadder
1Omm01 50c/c & outer face
haunch bars 400mm wide
150 it

200
e 1 - 4-8 300
SAND FILLING 300
Ld 00
3600
Bottom mesh bothways
10 mm 150 c/c 3101143

Note:
1. Gradeof Concrete :M30 SCHEME :
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slobs : 45MM
side walls : 45MM
4. SEC : 10 T/SQM
5. All dimensions are in 'mm' unless specified.
6. The Steel should not be overlapped
at the junction points
7. Not more than 1/3rd of the bars should
10 KL SUMP
be curtailed at a given section
8. As per IS 3370, the maximum spacing of
Reinforcement should not exceed 300mm or
thickness of section whichever is less
NW: Providing Water Supply Scheme
10mm 150 c c Radial
from end of projection CI man holes
cl 2Nos
Top Slab Top slab(150)
Projection 8mm 150 c/c
Circumferential
Phenail with
r
fly proof v ntilator
150 EM.

Bell ifnouth
900
G.I Steps300c/c /
10mm 150 c/c 150
Both ways 10 mm 150/c

3000 Verticall`t1:1148c outerface

125C
Top mesh bothways 8 mm 150c/c
10 mm 150 c/c Hoop rings inner
RCCladder
lOmm0150c/c & outer face
haunch oors 400rnm wide

\
MEOW . I
t I
200
...... , . ' - ' 144:8 , .. . 300
SAND FILLING 300
Ld 200
3600
Bottom mesh bothways
10 mm 150 c/c

Note: SCHEME
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slobs : 45MM
side wells : 45MM
4. SBC : 10 .1/SOM
5. All dimensions ore in 'mm' unless specified.
12 KL SUMP
6. The Steel should not be overlopped
at the junction points
7. Not more than 1/3rd of the bars should
be curtailed of a given section
8. As per IS 3370, the maximum spacing of
Reinforcement should not exceed 300mm or
thickness If section whichever is less
NW: Providing Water Supply Scheme
10mm @ 150 c/c Radial
CI man holes
.il#P9 from end of projection 2Nos
Top Slab 1---4411ar a_cm. Phenail with Top slab(150)
8mm @ 150 c/c
Projection
Circumferential 7
fly proof v ntilator
--

150 isommoII
moos 9 1
T6o
Bell outh
900
GI 10mm @ 150 c/c
Steps@300c/c__\
150
/A\ Both ways Li 10 mm 150/c
4000 VerticalstelY& outerface
115C
4
Top mesh bothways 8 mm 153c/c
10 mm @ 150 c/c Hoop rings inner
RCCIadder
1 Omm491 50c/c & outer race
haunch bars 400mm wide

/
200

300
SAND FILLING i *..i 30
Ld 200
4600
Bottom mesh bothways
10 mm 150 c/c

Note: SCHEME :
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slabs : 45MM
side walls : 45MM
4. SBC : 10 T/SOM
5. M dimensions are in 'rnrri . unless specified.
6. The Steel should not be overlapped
at the junction points
20 KL SUMP
7. Not more than 1/3rd of the bars should
be curtailed at a given section
8. As per IS 3370, the maximum spocing of
Reinforcement should not exceed 300mm or
thickness of section whichever is less

I
NW: Providing Water Supply Scheme
1.--5
,
10mm KJ0442adial
from end of projection CI man holes
1 piOeyrn cau- 2Nos
Top Slab Top slab(150)
Projection 8mm 150 c/c
Circumferential
Phenail with
r
fly proof ventilator
150 imomma
mous!.
fr-

outh
900
G.L 12.5 Steps300c/c
10mm '0 ivra c/c 150
Both ways 10 mm 150/c
4500 Vertica4le& outerface
145C
Top mesh bothways
8 mm 150c/c
10 mm @ 150 c/c Hoop rings inner
RCCladder
1 Omm01 50c/c & outer face
haunch bars 400mm wide
150
200
300
SAND FILLING 300
Ld ?00
4600
Bottom mesh bothways
10 mm 150 c/c
P.2-, 4
s1 .3
Note:
1 Grodeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415 SCHEME :
3. Clear minimum cover
slobs : 45MM
side walls
4. SBC
: 45MM
: 10 T/SQM
5. All dimensions are in 'mm' unless specified.
30 KL SUMP
6. The Steel should not be overlapped
at the junction points
7. Not more than 1/3rd of the bars should
be curtailed at a given section
8. As per IS 3370, the moximum spacing of
Reinforcement should not exceed 300mm or
thickness of section whichever is less
NW: Providing Water Supply Scheme MVS -ro PA DrrIANA .01 1 141
- - - -

10mm 150 c/c Radial

1.35m from end of projection CI man holes
2Nos
Top Slab Top slab(150)
Projection 8mm 150 c/c
Circumferential r Phenail with
fly proof v ntilator
150

outh
900
G.L Steps300c/c
10mm 150 c/c 150
ATI Both ways 10 mm 150/c

5000 Vertical in & outerface

160C
Top mesh bothways 8 mm 150c/c
10 mm 125 c/c Hoop rings inner
RCCladder
1 Omm01 50c/c & outer face
haunch bars 400mm wide

Mil MEW t- 200

Ad 0 ,.
. . C 1;4:8 * ' 300
SAND FILLING 300

T7
Ld
ili 5600
0
00 f
Bottom mesh bothways
10 mm 150 c/c /t58
) 4 4)
CONDITIONS
1. Gradeof Concrete :M30 Note: As per IS 3370, the maximum spacing SCHEME : MVS to PADMANA8HAM
2. Grade of Steel (Tor 40) : Fe415 of Reinforcement should not exceed
3. Clear minimum cover
slobs :45MM 300mm or thickness of section whichever LOCATION:
side walls : 45MM is less
4. All dimensions are in 'mm' unless specified. SBC : 10 T/SQM 04DeztigiN
5. The Steel should not be overlapped
at the junction points
6. Not more than 1/3rd of the bars should
be curtailed at a given section
40 KL SUMP
G.L 350 MO To PATIAVIAMe nA ir,
COLUMN

RAFT BEAM(450X600)
10:0 200c/c
BOTH WAYS 12 200C/C
12 ; 200C/C RINGS
2.40m
0
300
.
eiC C 1: 4: 8.
\300

1500

2100

SECTION A A C OF RING BEAM

12 200C/C RINGS

4L-12 0200C/C
STIRRUPS

2 200TorEx
(6950+15 0 0) 1.20mts
on each side of
columns
BOTTOM REINFORCEMENT OF
RAFT FOUNDATION
SECTION OF RAFT BEAM
1 A ? ?Moved //

CONDITIONS
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
Po
slob :45MM
Beams
Columns
:45MM
: 45MM f s.lsls,0
a 1474)/9 U
Footings :50MM 971F
4. All dimensions ore in 'mm' unless specified.
5. The Steel should not be overlapped
Wind speed 50 m/s
at the junction points
6. Not more than 1/3rd of the bars should FOUNDATION DETAILS (
be curtailed at a given section
90KL O.H.B.R 20.0m stg

BC OF SOIL 20T/M2
 fYikl_S To PADnilvAGHArrl

350

0
0
0 to 221 200c/c
80 200C/C

300

SECTION OF COLUMN SECTION OF BRACE

350

10g 0200CLC

0
0
to

8 Nos of 12mm dia diagonal bars shall

be provided at column brace junction
opposite side

COLUMN BRACE JUNCTION

CONDITIONS

1. Grodeof Concrete :6130

2. Grade of Sted (Tor 40) : Fe415
3. Clear minimum cover
Top & Bottom Danes
Beans
Columns
:451/1f
:454111
:45 Al
Wind speed
speed 50m/s
4. Al efrnensices ere h .rnm . unless specified.
5. The Steel should not be overlapped 90KL O.H.B.R 20m stg
at the Junction points
6. Not more tam 1/3rd of the bars Mould
be curtsied at a given section 3
SBC OF SOIL 201/M2
 IY11/-S -To PADPIANA B HA P1

DETAILS OF TOP RING BEAM

150

900
12 150c/c

8c5 150c/c

I 2-16 .4
C-6Nos 8-12dia

each face
2L-12 200c/c
imusrAl

350

BOTTOM RING BEAM CUM LANDING

Rotdirrztf.mTwoot-7410o
CONDITIONS
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover Wind speed 50 m/s
BESTS : 45M14

Slab :451AM
4. NI dimensions ore in 'aim' unless specified. 90KL 0.H.B.R 20m stg
5. The Steel should not be overlapped
at the junction points
6. Not more than 1/3rd of the bars should
be curtailed at o given section ABC OF SOIL 20T/M2
 mvs TO pADMAIV4.611AM

RADIAL & CIRCUMFERENTIAL

CURTAIL ALT. BARS 1.75M AND AGAIN CURTAIL
ALT. BARS @ 2.65M FROM EDGE. THE REMAINING
RADIAL BARS WILL CONTINUE

81 125c/c RADIAL
AND CIRCUMFERENTIAL UPTO 1000
ti
3500

100
150mm Thick Wall

8 '';', 10 150c/c hoops Inner &Outer

cr
C

10 ',:CD 150c c BOTH RADIAL & CIRCUMFERENTIAL

10 150c/c
STAGGERED
10 150c/c Vertical Staggered

101 150c c BOTH RADIAL & CIRCUMFERENTIAL

CURTAIL ALT. BARS @ 1.75M AND AGAIN CURTAIL
ALT. BARS 2.65M FROM EDGE. THE REMAINING
RADIAL BARS WILL CONTINUE

C
to
900

350

DETAILS OF SIDE WALL, TOP & BOTTOM DOMES

r K, bs--) er rao omit kr7-'-Ag$ele
CONDiTION
1. Grodeof Concrete :M30
2. Grade of Steel (Tor 40) : 4415 Wind speed 50m/s
3. Clear minimum cover
5de eche
Top & Bottom Domes
:451M
:45101 90KL O.H.B.R 20m stg
t. Al cimenslons are ti 'corn' unless specified.
5. The Steel should not be overlapped
at the Junction points
6. Not more thin 1/3rd of the boss should
be curtated at a given section
SBC OF SOIL 20T/M2
 (\WS To pA D NI A NABI+AM

125

0
0
(NI
150

0
0
0

Tfriiiil
0
I CONDI TION5
CI I i
4 )
1. Grodeof Concrete :M30
2. Grade of Steel (Tor 40) : fe415

3. Clear minimum cover
Side walls :45MM

C Top de Bottom slobs

Beams
:45MM
:45MM
Columns :45MM

IT Footings :50MM
4 All dimensions ore in 'mm unless specified.
5. Ihe Steel should not be overlapped
at the junction points
6. Not more than 1/3rd of the hors should
- ' be curtailed ot a given section
0
I. Provide Rcc stair cose-M30 with RCC raiiin
CN
///f.C1_
H RADIUS OF CURVATURE IS 6.00MTS

SECTIONAL ELEVATION

/
N UMN 350x350

\ .\
\ \ \
\ 13roce 300x600
\

OJTI
l I 1' 5114 *15 1 3
I
j1:301..10M RING Gil201.12
/ / 350)(600
/ /
/

C3r2gt-kte--"IRM

Wind speed 50 m/s

90K!.. O.H.B.R 20m sfg
PL AN SE'. OF SOIL 201-
 MVS SCHEME 10 PADMANABHAM
COLLECTION WELL - CUM - PUMP HOUSE - GM Dia

8mm0 8mm0
/ 150mm c/c Circumferential / 150mm c/c Radial
0.15m
0If

I OmmO @ 150mm c/c both ways

8mm0 @ 150mm c/c
Vertical (Nominal Rf) 150mm thick wall
Hoop (Nominal Rf)
8mm0 @ 200mm c/c
lOmm0 @ 150mm c/c
Radial 1.5m lOmm0 150 c/c
lOmm0 @ 150mm c/c Circumferential
ot ways as mes .

2800

VerticalVenrcement

BL lOmm0 @ 150mm c/c lied level

711%

Well sticning-300th Hoop Reinforcement

l OmMO @ 150mm c/c I/ A PPyoved

Infiltration Galleries 500 mm dia
9000 PD

75mm projection
1/a.k4i, 7,3

200 -8 nos

16mm Dia 1000mm long 1800 c: c.

17 V V V V V 17 V V 17 V V 17 V V V V N7 V N7 V N7 17 V 0 N7 17 V 17
300 vvvtr V V VVVVV17 17VVVV17 tr 17 170017 VV0 V 'ilter media with 40mm 11130 Metal
V V
V V "VW
V WW1/
V VW"

550 1711 1WWWWWWAWWW14 Filter media with 20mm and I 2inm
W.V.:. V.V.V.V.W.W.V.W.V.V.V.V.V.W.V.V.V.V.V.V.V.v. 11130 Metal
MS Plate 200x6
Stirrups 10 0 150 c 1c
ISA 1 00x 1 00x 10- 2 Nos

CONDITIONS
I. Gradeof Concrete :M30 SCHEME : MVS TO PADMANABHAM
2. Grade of Steel (Tor 40) : Fe415
LOCATION:
3. Clear minimum cover
slabs : 45MM illiestaatia0~118110111910
side walls :45MM DWG.NO .
4. All climensions are in 5nrif unless specified, COLLECTION WELL CUM PUMP HOUSE
5. The Steel should not be overlapped 6.0M DIA
at the junction points
6. Not more than 1/3rd of the bars should
be curtailed at a given section
 INFILTRATION WELL AT PADMANABHAM
Man Hole 900x900
lOmm0 150 c/c Radial 1500 Length I Omm0 200 c/c
lOmm0 @ 150mm c/c Circumferential
of ways as mesF-
0

BL 600
Ala I T-
Bed level

2000
I eep holes with 50mm dia
with PVC 6 kg/sqcm pipes
at lm interval in zig zag manner

4000

well stiening-250th

Vertical Reinforcement 6000

lOmm0 @ 200mm c/c

Hoop Reinforcement
1 OMMO @ 200mm c/c
I`
Infiltration Galleries 500 mm
Infil ration Galleries 500 mm din

It!
7511)111 projection
11 1
85.

1
160 -8 nos

',Of
li 31
16mm Dia 1000mm long 1800 cje

300 le VV V N7 V V N7 V V N7 N7 V C7 N7 N7 V N7 N7 V V V V V V C7

r
....,.......,.........,......................................
V N7 N7 V
C7 V N7 V V C7 N7 N7 N7 C7 N7 N7 V N7 N7 N7 N7 N7 V C7 C7 V V 7 VI C7 N7 N7 :
4

mil Filter media with 40mm 11110 Metal

f 350 1
.......,...,......,.......,.......,..........................
...........................,.....,..,...........................
....,
.. ..........,............................................ ..
..............................................,.....,...... ilter media with 20mm and 12mm
11130 Metal

Stirrups 10 0 150 c /c MS Plate 200x6

ISA 100x I 00x I0- 2 Nos

(:()NDI'll()NS
I. Gmdeof Concrete M30 SCHEME : MVS TO PADMANABHAM
2. Grade of Steel (Tor 40) : Fo415
3. Clear minimum cover LOCATION:
slabs :45MM
side walls : 45MM
4. All dimensions are in 'mid unless specified INFILTRATION WELL 4.00 M DIA
5.The Steel should oot be overlapped DWG.NO .
at the Junction points
6.Not more than 1/3rd of the ban should
he curtailed at a given section
8mm dia radially & circumferentially for both directions
12:5 c/c curtail alternate radial bars 1.75m & again Top dome 125mm thick
curtail alternate bars 0 2.65 m from the edge and continue
the remaining bars
Phenail with
r fly proof ventilat
CI man hole
2Nos)
Top dome UPTO 1M(150 th.)

Abb.
RCCIadder
0
0 40 m wide Ring Beam 200x250
c\J
main steel 4-12mmilr
S 2 L-8 mm -gT @150 c/c
2,5 0
0 outh

Steps300c/c
150 Thick Side Wall
900

G.I I 10 mm 150 c/c

7000
/2C\ 2550 Vertical Outer & Inner face 8 mm 5c/c Hoop rings
inner outer face in
Top mesh bothways staggered fashion
10 mm 125 c/c 200
150 10mm0150c/c
haunch bors

250
, 300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 7600

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover
slobs : 45 mm 4\V P TY) viLdcf
sidewalls : 45 mm
85KL SUMP
Beom : 45 mm
4. SBC : 10 t/sqm
5. All dimensions are in 'mm' unless specified PP
6. The steel should not be overlapped of the junction points
-)11 1)
7. Not more than 1/3rd of the bars should be A5113 2A".
curtailed at a given section

8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dia radially & circumferentially for both directions
0 125 c/c curtail alternate radial bars 0 1.85m & again
curtail alternate bors 0 2.80 m from the edge and continue
Top dome 125mm thick
tt1e remaining bars Phenol' with
r fly proof ventilat
ri:ZinZt CI man hole
/ LINVJ)

11..1 1.
(I)

ii RCCIadder
400mm wide Ring Beam 200x250
20 ain steel 4-16mmv
*-2 L-8 mmv 150 c/c
ig
6"D`10 B <73 b-
-...., b V 0

Steps300c/c
150 Thick Side Wall
900 \
G.I 1 :0
A\ 10 mm 150 c/c
2750 Vertical Outer & Inner face 8 mm 7 c c Hoop rings
inner&out r face in staggereu

150
I ncthoac
lornTio
Top mesh bothway-
.46,10 mm 125 c/.
fashion
200
bars

250
. . ...._ .,:-..,..: - ...,..,,,,. - .- 300 CC(1:4:8)
Sand Filling 300 Sand Filling
mirsou
40d 8100
Bottom mesh bothways
All dimensions are in 'mm'
10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover
slabs : 45 mm
sidewalls : 45 mm
Beam : 45 mm
4. SBC : 10 t/sqm
100 KL SUMP
5. All dimensions ore in 'mm' unless specified
\)
6. The steel should not be overlapped at the juriction points

7. Not more than 1/3rd of the bars should be 'AND '24.

curtailed at o given section

8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dio radially & circumferentially for both directions
Co 125 c/c curtail alternate radial bars 2.00m & again
c;irtail .lternate bars 3.00 m from the edge and continue Top dome 125mm thick
the remaining bars Phenail with
F fly proof ventilat
CI man hole
2Nos)

RCCIadder
400mm wide Ring Beam 250x250
25 main steel 4-16mm7
4 66.
2 L-8 mm yr 150 c/c
.a6i) go. outh

Steps300c/c
200 Thick Side Woll
900

G.I 8000
/A\ 10 mm 200 c/c
2850 Vertical Outer & Inner face 8 mm OOc/c Hoop rings
inner uter face in stagger
Top mesh bothways fashi.
10 10 mm ( 125 c/c 200
150 allrnm0150c/c
hauncbrs

250

!. 300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 8700

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Cleor Minimum Cover
slabs : 45 mm
sidewalls : 45 mm
Beam : 45 mm
4. SBC : 10 t/sqm
120 KL SUMP
5. All dimensions are in 'mm' unless specified

6. The steel should not be overlapped at the junction points

7. Not more than 1/3rd of the bars should be

curtailed at a given section 1,1t.v \\1,

7-N4-1N15
8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

 L.W.L +25.00

CA)

8200

Conditions:
1.Grade of Concrete: M30
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
side walls :45mm
A POW \MA I )

Top&Bottoam slabs:45mm A
s

Columns :45mm
Footings :50mm ki01 13 eq7 )1

4.AII dimensions are in 'mm' unless specified

5.The steel should not be overlapped at the junction points
6.Not more than 1/3rd of the bars should be curtailed at a given section
7.Provide RCC stair case-M30 with RCC railing
40KL OHBR SHAFT
25.00 M STAGING
SBC of Soil 18t/m2
 5200

10 V150c/c BOTH FACES of Vertical

10 V150c/c BOTH FACES

DETAIL 'P' CIRCUMFERENTIAL
G.L
300X2500 Top mesh bothways 12mm@l00c/c Mesh

8200
12 i@100c/c CIRCULAR Bottom Mesh bothways 25j@100c/c MESH
RINGS UPTO 1.30M FROM
OUTER EDGE

SECTIONAL ELEVATION OF RAFT

la @100c/c MESH 25 V100c/c MESH

12 1.@100c/c CIRCULAR
RINGS UPTO 1.30M FROM
OUTER EDGE

TOP REINFORCEMENT BOTTOM REINFORCEMENT

10T@150 BOTH FACES Conditions:

1.Grade of Concrete: M30
VERTICAL IN SHAFT
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
10T@150 BOTH FACES side walls :45mm
CIRCUMFERENTIAL Top&Bottoam slabs:45mm
10"(@150 BOTH FACES Columns :45mm
Footings :50mm
// 300X2500 4.AIl dimensions are in 'mm' unless specified
5.The steel should not be overlapped at the
junctions
6.Not more than 1/3rd of the bars should be
2 500 curtailed at a given section

3c c INtiroNAD-C1-
k

0 600
0
tn , 15 V-1 6 -0 )-0
c6
0 C.0 (1:4:8)
0
40KL 0.H.B.R SHAFT
DETAIL 'P' 25.00 M STAGING
SBC OF SOIL 18T/M2
 Zs+

8 @150c/c bothways upto 1000

0
R=8910 0
0

2L-8 @200c/c 8 150c/c as meridonial and circumferential ste- Curtail Alt. Bars of
meridonial reinforcement @ 2.Omt from edge and Bain curtail alternate
bars @ 3.Omt from edge. The remaining bars continue

R=3925

N.!

4Y160 C 10 @ 150 c/c hoops Inner & Outer

200
8@1.)0 bothways

8 @150 c/c inclined staggered

8 @150c/c as meridonial and circumferential
steel, curtail alternate bars @1.30mt from
edge and again curtail alternate bars @2.0mt
from edge. The remaining ars continue

450

s..
O 4Y4-20+4Y-1-20

3 124' 13crttorr)

2L-8T@200c R=2600

Conditions:
1.Grade of Concrete: M30
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
side walls :45mm
Vt AN% A424

S
Top&Bottoam slabs:45mm
Columns :45mm
Footings :50mm
4.All dimensions are in 'mm' unless specified i
5.The steel should not be overlapped at the
junctions
(CP
ortjtoit5 \Alz.
6.Not more than 1/3rd of the bars should be NAV.)
curtailed at a given section

Wind Speed 45m/sec

40KL OHBR-Shaft 25mt Stg.

SBC of Soil 18t/m2
8mm dia radially & circumferentially for both directions
125 c/c curtail alternate radial bars 1.75m & again Top dome 125mm thick
curtail alternate bars 0 2.65 m from the edge and continue
the remaining bars
Phenail with
fly proof ventilat
CI man hole
2Nos)
Top dome UPTO 1M(150 th.)

0
RCCladder
0 400mm wide Ring Beam 200x250
(NJ
main steel 4-12mmiv
S
2 L-8 mm v 150 c/c
7,50 0

Steps300c/c
150 Thick Side Wall
900

G.I 7000
10 mm 150 c/c
4\'\ 2550 Vertical Outer & Inner face 8 mm 5c/c Hoop rings
inner outer face in
Top mesh bothways stagg red fashion
10 mm 125 c/c 200
150 1Omm0150c/c
hauncbrs

" 250
e.. 300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 7600

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover 1.1
slobs : 45 mm
sidewalls : 45 mm
85KL SUMP
BP:om : 45 mm
4. SBC : 10 t/sqm
5. All dimensions ore in 'rrim . unless specified

6. The steel should not be overlapped of the junction points

7. Not more than 1/3rd of the bars should be

curtailed at a given section

8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dia radially & circumferentially for both directions
125 ,.c/c curtail alternate radial bars 1.85m & again
curtail alternate bars 2.80 m from the edge and continue
Top dome 125mm thick
tile remaining bars Phenail with
fly proof ventilat
CI man hole
2Nos)

Ring Beam 200x250

main steel 4-16mmv
"-2 L-8 mm -or 150 c/c
15-0

Steps300c/c
150 Thick Side Wall
900

G.I 0
10 mm 150 c/c
/2C\ 2750 Vertical Outer & Inner face 8 mm 7 c/c Hoop rings
inner&out r face in staggere
Top mesh bothway fashion
10 mm 125 c/ 200
150 10mm0150o/c
aunt burs

250
300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 8100

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover
slobs : 45 mm
sidewolls : 45 mm
Beam : 45 mm
4. SBC : 10 t/sqm
100 KL SUMP
5. All dimensions are in 'mm . unless specified

6. The steel should not be overlapped at the junction points

7. Not more than 1/3rd of the bors should be

curtailed of a given section

8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dia radially & circumferentiolly for both directions
0 125 c/c curtail alternate rodiol bars 0 2.00m & ogoin
..Iternate bars 0 3.00 m from the edge and continue Top dome 125mm thick
the remaining burs Phenail with
fly proof ventilat
CI man hole
2Nos)

RCCladder
400mm wide Ring Beam 250x250
main steel 4-16mm -qr
2 L-8 mm -gr 150 c/c
2So outs

900
fr 200 Thick Side Wall
Steps300c/c

G.I 8000
A\ 10 mm @ 200 c/c
2850 Vertical Outer Sc Inner face 8 mm OOc/c Hoop rings
inner uter face in stagger
Top mesh bothways fashi
10 10 mm 125 c/c 200
150 iernm0150c/c
ounchbrs

250
e.
;, 300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 8700

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grode of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover
slabs : 45 mm
sidewolls : 45 mm
Beom : 45 mm
4. SBC : 10 t/sqm
120 KL SUMP
5. All dimensions are in 'mm' unless specified

6. The steel should not be overlapped at the junctioi points

7. Not more thon 1/3rd of the burs should be

curtailed of a given section

8. As per IS 3370, the max. spocing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dia radially & circumferentially for both directions
125 c/c curtail alternate bars 0 2.75m & again
curtail olternate bars 4.1m from the edge and continue
the remaining bars Phenail with
fly proof ventilator CI man hole
125 2Nos)

Top dome(125)
it
0 Beam 300x300 main steel 4-16mm
tO
co 2 L-8 mm 0150 c/c

300
f
500/
Steps300c/c
Lal 10 mm 200 c/c 0 mm 100
vertical in & outerface Hoop rings
11 000 1 inn erArn r Cl/ 0/F Pipe Line
face in 200 Inlet connections
Top mesh bothways staggered fut
2100 10 mm 125c/c
RCCladder
40mwide duck foot bend

250
; 300 c.c(1:4:8)

L = 4C,d 200
12000
bottommesh bothways
10 mm 1;1- 125c/c
NOTE :-
1. Grade of concrete : M30
2. Grade of steel(Tor 40) : Fe415
Note: As per IS 3370, the
3. clear minimum cover maximum spacing of
V\ Acp -MArag ( 1
slabs : 45 mm
reinforcement should not
sidewolls : 45 mm
Beam : 45 mm exceed 300 mm or thickness
4. SBC : 18 t/sqm of section whichever is less P'
5. All dimensions are in 'mm' unless specified
psot eA.Przu-sIgf
1
4.r-A
6. The steel should not be overlapped at the junction points Aos)1 5 2g6\
7. Not more than 1/3rd of the bars should be 200KL SUMP
curtailed of a giien section
8mm dia radially and circumfrential for both
directions 0125mmc/c Curtail alternate
bars@ 2.5 m and again Curtail alterna Phenail with
bars03.75 mts and again from the edge
and continue the remaining bars f fly proof ventilator
CI man hole
2Nos)
Top dome (125 mm)

125 mm thick
Top dome Top beam (bxd) 300x300
main steel 4-16mm
2 L-8 mm@150 c/c
300
Steps300c/c
500 10 m m 150 c/c inrvand CI D/F pipe line
O u :er face Inlet connections
G.l 10000
/A\ 1 2mm01 25mmc/c
3650 Hoop rings inner& 250mm side wall
outer faces in
Staggered fashion
Top mesh bothways
RCC Ladder duck foot bend
10 mm 125 c/c
15 400 mm wide

250
f 300 CC(1:3:6)

200
10800
Haunch bottom mesh both ways 10mm dia 125mm c/c
200x200
Note:
1. Gradeof Concrete :M30 SCHEME : MVS to Kondapuram and other
2. Grade of Steel (Tor 40) : Fe415 habitations
3. Clear minimum cover
slabs : 45MM
side walls
Beam
: 45MM
: 45MM 250 KL SUMP if App/oved
4. SBC : 10 T/SQM
5. All dimensions are in 'mm' unless specified.
6. The Steel should not be overlapped M
at the junction points
7. Not more than 1/3rd of the bars should
1'5 AN :\170611)
be curtailed at a given section
8. As per IS 3370, the maximum spacing of 1/37 C
Reinforcement should not exceed 300mm or
thickness of section whichever is less
 10mm dia 150mm C/C Radial CI man hole
0.9m from end of projection 0.60x0.60m
2Nos
8mm dia 150 mm C/C Top slab(125)
Phenail with
Top Slab circumferential fly proof v ntilator
Projection 00
150

outh

Steps300c/c /
150
10 mm 150/c

3000 Vertical inner & outerface

190C Top mesh bothways 8 mm 150c/c

10 mm 150 c/c Hoop rings inner
RCCladder
1 Omm01 50c/c & outer face
hunch bars 400mm wide
150 I
200
A. : ". 150 CC(1:4:8)
Sand filling $150 Sand filling
Ld 0
3600
Bottom mesh bothways
10 mm 150 c/c

Note:- SCHEME :
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slabs :45MM
side walls :45MM 10 KL GLSR
4. SBC : 10T/SOM
5. All dimensions are in 'mm' unless specified.
6. The Steel should not be overlapped
at the junction points
7. Not more than 1/3rd of the bars should
be curtailed at a given section
Conditions:
1.Grade of Concrete: M30
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
side walls :45mm
Top&Bottoam slabs:45mm

Footings :50mm
4.All dimensions are in 'mm' unless specified
5.The steel should not be overlapped at the junction points
6.Not more than 1/3rd of the bars should be curtailed at a given
7.Provide RCC stair case-M30 with RCC railing
 5200

10 V150c/c BOTH FACES of Vertical

10'01500c BOTH FACES

DETAIL 'P' CIRCUMFERENTIAL
G.L G.L
300X2500 Top mesh bothways 12mm@l00c/c Mesh //X\N

-r-

.C.0 004j3)- " 4.

8200
12 yg 100c/c CIRCULAR Bottom Mesh bothways 251@100c/c MESH
RINGS UPTO 1.30M FROM
OUTER EDGE

SECTIONAL ELEVATION OF RAFT

121 @100c/c MESH 25 1100c/c MESH

1 1111111 110
1111
111111111111111111111/1/1
INIEREEKSEPTE
11111111111111111111111
11111111 11111//'
111111111111111111W
1111111111111111r
111111ETIO'
1.1W 12 -(0100c/c CIRCULAR
RINGS UPTO 1.30M FROM
OUTER EDGE

TOP REINFORCEMENT BOTTOM REINFORCEMENT

NJ
0
10 -1@150 BOTH FACES Conditions:
1.Grade of Concrete: M30
VERTICAL IN SHAFT
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
101@150 BOTH FACES side walls :45mm
CIRCUMFERENTIAL Top&Bottoam slabs:45mm
10!@150 BOTH FACES Columns :45mm
Footings :50mm
300X2500 4.All dimensions are in 'mm' unless specified
5.The steel should not be overlapped at the
Junctions
6.Not more than 1/3rd of the bars should be
2 50o curtailed at a given section

300

600
g* 60
I
' 71 1 5
L.!
:C.0 (1:4:8) .
40KL O.H.B.R SHAFT
DETAIL 'P' 25.00 M STAGING
SBC OF SOIL 18T/M2
8 @150c/c bothways upto 1000

R=8910
0

2L-8 @200c/c 8 @150c/c as meridonial and circumferential ste Curtail Alt. Bars of
meridonial reinforcement @ 2.0mt from edge and ain curtail alternate
bars @ 3.0mt from edge. The remaining bars contin e

R=3925

<Y160 C 10 @ 150 c/c hoops Inner & Outer

0

200
8@ 1 30 bothways

8 @150 c/c inclined staggered

8 150c/c as meridonial and circumferential
steel, curtail alternate bars @1.30mt from 0
edge and again curtail alternate bars @2.0mt
from edge. The r-emainingars continue

AOOL Ul

/011 1161b.

45
,, 'TOP
lL
R=4920
)

0 4Y1210-i-44-1-20

. S 1 2 t Bertovr)

300
2L-8T@200c R=2600

200

Conditions:
1.Grade of Concrete: M30
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
side walls :45mm AP irIc1):c_d( 1
Top&Bottoam slabs:45mm
Columns :45mm
Footings :50mm
4.All dimensions are in 'mm' unless specified
5.The steel should not be overlapped at the
junctions
6.Not more than 1/3rd of the bars should be /o )jj
curtailed at a given section

Wind Speed 45m/sec

40KL OHBR-Shaft 25mt Stg.

SBC of Soil 18t/m2
 10mm @ 150 _ cfcRadial
m
from end of projection CI man holes
0.9'm 2Nos
Top Slab Top slab(150)
Projection 8mm @ 150 c/c
Circumferential
Phenail with
r
fly proof v ntilator
150

Betl/nouth
9 00

7
G.1 Steps@300c/c
10mm @ 150 c/c 150
A\ Both ways 10 mm @ 150/c

3000 Vertical4 outerface

100
Top mesh bothways 8 mm 150c/c
10 mm @ 150 c/c Hoop rings
RCCIadder
1Omm01 50c/c & outer face
haunch bars 400mm wide
150 it

200
e 1 - 4-8 300
SAND FILLING 300
Ld 00
3600
Bottom mesh bothways
10 mm 150 c/c 3101143

Note:
1. Gradeof Concrete :M30 SCHEME :
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slobs : 45MM
side walls : 45MM
4. SEC : 10 T/SQM
5. All dimensions are in 'mm' unless specified.
6. The Steel should not be overlapped
at the junction points
7. Not more than 1/3rd of the bars should
10 KL SUMP
be curtailed at a given section
8. As per IS 3370, the maximum spacing of
Reinforcement should not exceed 300mm or
thickness of section whichever is less
NW: Providing Water Supply Scheme
10mm 150 c c Radial
from end of projection CI man holes
cl 2Nos
Top Slab Top slab(150)
Projection 8mm 150 c/c
Circumferential
Phenail with
r
fly proof v ntilator
150 EM.

Bell ifnouth
900
G.I Steps300c/c /
10mm 150 c/c 150
Both ways 10 mm 150/c

3000 Verticall`t1:1148c outerface

125C
Top mesh bothways 8 mm 150c/c
10 mm 150 c/c Hoop rings inner
RCCladder
lOmm0150c/c & outer face
haunch oors 400rnm wide

\
MEOW . I
t I
200
...... , . ' - ' 144:8 , .. . 300
SAND FILLING 300
Ld 200
3600
Bottom mesh bothways
10 mm 150 c/c

Note: SCHEME
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slobs : 45MM
side wells : 45MM
4. SBC : 10 .1/SOM
5. All dimensions ore in 'mm' unless specified.
12 KL SUMP
6. The Steel should not be overlopped
at the junction points
7. Not more than 1/3rd of the bars should
be curtailed of a given section
8. As per IS 3370, the maximum spacing of
Reinforcement should not exceed 300mm or
thickness If section whichever is less
NW: Providing Water Supply Scheme
10mm @ 150 c/c Radial
CI man holes
.il#P9 from end of projection 2Nos
Top Slab 1---4411ar a_cm. Phenail with Top slab(150)
8mm @ 150 c/c
Projection
Circumferential 7
fly proof v ntilator
--

150 isommoII
moos 9 1
T6o
Bell outh
900
GI 10mm @ 150 c/c
Steps@300c/c__\
150
/A\ Both ways Li 10 mm 150/c
4000 VerticalstelY& outerface
115C
4
Top mesh bothways 8 mm 153c/c
10 mm @ 150 c/c Hoop rings inner
RCCIadder
1 Omm491 50c/c & outer race
haunch bars 400mm wide

/
200

300
SAND FILLING i *..i 30
Ld 200
4600
Bottom mesh bothways
10 mm 150 c/c

Note: SCHEME :
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slabs : 45MM
side walls : 45MM
4. SBC : 10 T/SOM
5. M dimensions are in 'rnrri . unless specified.
6. The Steel should not be overlapped
at the junction points
20 KL SUMP
7. Not more than 1/3rd of the bars should
be curtailed at a given section
8. As per IS 3370, the maximum spocing of
Reinforcement should not exceed 300mm or
thickness of section whichever is less

I
NW: Providing Water Supply Scheme
1.--5
,
10mm KJ0442adial
from end of projection CI man holes
1 piOeyrn cau- 2Nos
Top Slab Top slab(150)
Projection 8mm 150 c/c
Circumferential
Phenail with
r
fly proof ventilator
150 imomma
mous!.
fr-

outh
900
G.L 12.5 Steps300c/c
10mm '0 ivra c/c 150
Both ways 10 mm 150/c
4500 Vertica4le& outerface
145C
Top mesh bothways
8 mm 150c/c
10 mm @ 150 c/c Hoop rings inner
RCCladder
1 Omm01 50c/c & outer face
haunch bars 400mm wide
150
200
300
SAND FILLING 300
Ld ?00
4600
Bottom mesh bothways
10 mm 150 c/c
P.2-, 4
s1 .3
Note:
1 Grodeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415 SCHEME :
3. Clear minimum cover
slobs : 45MM
side walls
4. SBC
: 45MM
: 10 T/SQM
5. All dimensions are in 'mm' unless specified.
30 KL SUMP
6. The Steel should not be overlapped
at the junction points
7. Not more than 1/3rd of the bars should
be curtailed at a given section
8. As per IS 3370, the moximum spacing of
Reinforcement should not exceed 300mm or
thickness of section whichever is less
NW: Providing Water Supply Scheme MVS -ro PA DrrIANA .01 1 141
- - - -

10mm 150 c/c Radial

1.35m from end of projection CI man holes
2Nos
Top Slab Top slab(150)
Projection 8mm 150 c/c
Circumferential r Phenail with
fly proof v ntilator
150

outh
900
G.L Steps300c/c
10mm 150 c/c 150
ATI Both ways 10 mm 150/c

5000 Vertical in & outerface

160C
Top mesh bothways 8 mm 150c/c
10 mm 125 c/c Hoop rings inner
RCCladder
1 Omm01 50c/c & outer face
haunch bars 400mm wide

Mil MEW t- 200

Ad 0 ,.
. . C 1;4:8 * ' 300
SAND FILLING 300

T7
Ld
ili 5600
0
00 f
Bottom mesh bothways
10 mm 150 c/c /t58
) 4 4)
CONDITIONS
1. Gradeof Concrete :M30 Note: As per IS 3370, the maximum spacing SCHEME : MVS to PADMANA8HAM
2. Grade of Steel (Tor 40) : Fe415 of Reinforcement should not exceed
3. Clear minimum cover
slobs :45MM 300mm or thickness of section whichever LOCATION:
side walls : 45MM is less
4. All dimensions are in 'mm' unless specified. SBC : 10 T/SQM 04DeztigiN
5. The Steel should not be overlapped
at the junction points
6. Not more than 1/3rd of the bars should
be curtailed at a given section
40 KL SUMP
G.L 350 MO To PATIAVIAMe nA ir,
COLUMN

RAFT BEAM(450X600)
10:0 200c/c
BOTH WAYS 12 200C/C
12 ; 200C/C RINGS
2.40m
0
300
.
eiC C 1: 4: 8.
\300

1500

2100

SECTION A A C OF RING BEAM

12 200C/C RINGS

4L-12 0200C/C
STIRRUPS

2 200TorEx
(6950+15 0 0) 1.20mts
on each side of
columns
BOTTOM REINFORCEMENT OF
RAFT FOUNDATION
SECTION OF RAFT BEAM
1 A ? ?Moved //

CONDITIONS
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
Po
slob :45MM
Beams
Columns
:45MM
: 45MM f s.lsls,0
a 1474)/9 U
Footings :50MM 971F
4. All dimensions ore in 'mm' unless specified.
5. The Steel should not be overlapped
Wind speed 50 m/s
at the junction points
6. Not more than 1/3rd of the bars should FOUNDATION DETAILS (
be curtailed at a given section
90KL O.H.B.R 20.0m stg

BC OF SOIL 20T/M2
 fYikl_S To PADnilvAGHArrl

350

0
0
0 to 221 200c/c
80 200C/C

300

SECTION OF COLUMN SECTION OF BRACE

350

10g 0200CLC

0
0
to

8 Nos of 12mm dia diagonal bars shall

be provided at column brace junction
opposite side

COLUMN BRACE JUNCTION

CONDITIONS

1. Grodeof Concrete :6130

2. Grade of Sted (Tor 40) : Fe415
3. Clear minimum cover
Top & Bottom Danes
Beans
Columns
:451/1f
:454111
:45 Al
Wind speed
speed 50m/s
4. Al efrnensices ere h .rnm . unless specified.
5. The Steel should not be overlapped 90KL O.H.B.R 20m stg
at the Junction points
6. Not more tam 1/3rd of the bars Mould
be curtsied at a given section 3
SBC OF SOIL 201/M2
 IY11/-S -To PADPIANA B HA P1

DETAILS OF TOP RING BEAM

150

900
12 150c/c

8c5 150c/c

I 2-16 .4
C-6Nos 8-12dia

each face
2L-12 200c/c
imusrAl

350

BOTTOM RING BEAM CUM LANDING

Rotdirrztf.mTwoot-7410o
CONDITIONS
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover Wind speed 50 m/s
BESTS : 45M14

Slab :451AM
4. NI dimensions ore in 'aim' unless specified. 90KL 0.H.B.R 20m stg
5. The Steel should not be overlapped
at the junction points
6. Not more than 1/3rd of the bars should
be curtailed at o given section ABC OF SOIL 20T/M2
 mvs TO pADMAIV4.611AM

RADIAL & CIRCUMFERENTIAL

CURTAIL ALT. BARS 1.75M AND AGAIN CURTAIL
ALT. BARS @ 2.65M FROM EDGE. THE REMAINING
RADIAL BARS WILL CONTINUE

81 125c/c RADIAL
AND CIRCUMFERENTIAL UPTO 1000
ti
3500

100
150mm Thick Wall

8 '';', 10 150c/c hoops Inner &Outer

cr
C

10 ',:CD 150c c BOTH RADIAL & CIRCUMFERENTIAL

10 150c/c
STAGGERED
10 150c/c Vertical Staggered

101 150c c BOTH RADIAL & CIRCUMFERENTIAL

CURTAIL ALT. BARS @ 1.75M AND AGAIN CURTAIL
ALT. BARS 2.65M FROM EDGE. THE REMAINING
RADIAL BARS WILL CONTINUE

C
to
900

350

DETAILS OF SIDE WALL, TOP & BOTTOM DOMES

r K, bs--) er rao omit kr7-'-Ag$ele
CONDiTION
1. Grodeof Concrete :M30
2. Grade of Steel (Tor 40) : 4415 Wind speed 50m/s
3. Clear minimum cover
5de eche
Top & Bottom Domes
:451M
:45101 90KL O.H.B.R 20m stg
t. Al cimenslons are ti 'corn' unless specified.
5. The Steel should not be overlapped
at the Junction points
6. Not more thin 1/3rd of the boss should
be curtated at a given section
SBC OF SOIL 20T/M2
 (\WS To pA D NI A NABI+AM

125

0
0
(NI
150

0
0
0

Tfriiiil
0
I CONDI TION5
CI I i
4 )
1. Grodeof Concrete :M30
2. Grade of Steel (Tor 40) : fe415

3. Clear minimum cover
Side walls :45MM

C Top de Bottom slobs

Beams
:45MM
:45MM
Columns :45MM

IT Footings :50MM
4 All dimensions ore in 'mm unless specified.
5. Ihe Steel should not be overlapped
at the junction points
6. Not more than 1/3rd of the hors should
- ' be curtailed ot a given section
0
I. Provide Rcc stair cose-M30 with RCC raiiin
CN
///f.C1_
H RADIUS OF CURVATURE IS 6.00MTS

SECTIONAL ELEVATION

/
N UMN 350x350

\ .\
\ \ \
\ 13roce 300x600
\

OJTI
l I 1' 5114 *15 1 3
I
j1:301..10M RING Gil201.12
/ / 350)(600
/ /
/

C3r2gt-kte--"IRM

Wind speed 50 m/s

90K!.. O.H.B.R 20m sfg
PL AN SE'. OF SOIL 201-
 MVS SCHEME 10 PADMANABHAM
COLLECTION WELL - CUM - PUMP HOUSE - GM Dia

8mm0 8mm0
/ 150mm c/c Circumferential / 150mm c/c Radial
0.15m
0If

I OmmO @ 150mm c/c both ways

8mm0 @ 150mm c/c
Vertical (Nominal Rf) 150mm thick wall
Hoop (Nominal Rf)
8mm0 @ 200mm c/c
lOmm0 @ 150mm c/c
Radial 1.5m lOmm0 150 c/c
lOmm0 @ 150mm c/c Circumferential
ot ways as mes .

2800

VerticalVenrcement

BL lOmm0 @ 150mm c/c lied level

711%

Well sticning-300th Hoop Reinforcement

l OmMO @ 150mm c/c I/ A PPyoved

Infiltration Galleries 500 mm dia
9000 PD

75mm projection
1/a.k4i, 7,3

200 -8 nos

16mm Dia 1000mm long 1800 c: c.

17 V V V V V 17 V V 17 V V 17 V V V V N7 V N7 V N7 17 V 0 N7 17 V 17
300 vvvtr V V VVVVV17 17VVVV17 tr 17 170017 VV0 V 'ilter media with 40mm 11130 Metal
V V
V V "VW
V WW1/
V VW"

550 1711 1WWWWWWAWWW14 Filter media with 20mm and I 2inm
W.V.:. V.V.V.V.W.W.V.W.V.V.V.V.V.W.V.V.V.V.V.V.V.v. 11130 Metal
MS Plate 200x6
Stirrups 10 0 150 c 1c
ISA 1 00x 1 00x 10- 2 Nos

CONDITIONS
I. Gradeof Concrete :M30 SCHEME : MVS TO PADMANABHAM
2. Grade of Steel (Tor 40) : Fe415
LOCATION:
3. Clear minimum cover
slabs : 45MM illiestaatia0~118110111910
side walls :45MM DWG.NO .
4. All climensions are in 5nrif unless specified, COLLECTION WELL CUM PUMP HOUSE
5. The Steel should not be overlapped 6.0M DIA
at the junction points
6. Not more than 1/3rd of the bars should
be curtailed at a given section
 INFILTRATION WELL AT PADMANABHAM
Man Hole 900x900
lOmm0 150 c/c Radial 1500 Length I Omm0 200 c/c
lOmm0 @ 150mm c/c Circumferential
of ways as mesF-
0

BL 600
Ala I T-
Bed level

2000
I eep holes with 50mm dia
with PVC 6 kg/sqcm pipes
at lm interval in zig zag manner

4000

well stiening-250th

Vertical Reinforcement 6000

lOmm0 @ 200mm c/c

Hoop Reinforcement
1 OMMO @ 200mm c/c
I`
Infiltration Galleries 500 mm
Infil ration Galleries 500 mm din

It!
7511)111 projection
11 1
85.

1
160 -8 nos

',Of
li 31
16mm Dia 1000mm long 1800 cje

300 le VV V N7 V V N7 V V N7 N7 V C7 N7 N7 V N7 N7 V V V V V V C7

r
....,.......,.........,......................................
V N7 N7 V
C7 V N7 V V C7 N7 N7 N7 C7 N7 N7 V N7 N7 N7 N7 N7 V C7 C7 V V 7 VI C7 N7 N7 :
4

mil Filter media with 40mm 11110 Metal

f 350 1
.......,...,......,.......,.......,..........................
...........................,.....,..,...........................
....,
.. ..........,............................................ ..
..............................................,.....,...... ilter media with 20mm and 12mm
11130 Metal

Stirrups 10 0 150 c /c MS Plate 200x6

ISA 100x I 00x I0- 2 Nos

(:()NDI'll()NS
I. Gmdeof Concrete M30 SCHEME : MVS TO PADMANABHAM
2. Grade of Steel (Tor 40) : Fo415
3. Clear minimum cover LOCATION:
slabs :45MM
side walls : 45MM
4. All dimensions are in 'mid unless specified INFILTRATION WELL 4.00 M DIA
5.The Steel should oot be overlapped DWG.NO .
at the Junction points
6.Not more than 1/3rd of the ban should
he curtailed at a given section
8mm dia radially & circumferentially for both directions
12:5 c/c curtail alternate radial bars 1.75m & again Top dome 125mm thick
curtail alternate bars 0 2.65 m from the edge and continue
the remaining bars
Phenail with
r fly proof ventilat
CI man hole
2Nos)
Top dome UPTO 1M(150 th.)

Abb.
RCCIadder
0
0 40 m wide Ring Beam 200x250
c\J
main steel 4-12mmilr
S 2 L-8 mm -gT @150 c/c
2,5 0
0 outh

Steps300c/c
150 Thick Side Wall
900

G.I I 10 mm 150 c/c

7000
/2C\ 2550 Vertical Outer & Inner face 8 mm 5c/c Hoop rings
inner outer face in
Top mesh bothways staggered fashion
10 mm 125 c/c 200
150 10mm0150c/c
haunch bors

250
, 300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 7600

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover
slobs : 45 mm 4\V P TY) viLdcf
sidewalls : 45 mm
85KL SUMP
Beom : 45 mm
4. SBC : 10 t/sqm
5. All dimensions are in 'mm' unless specified PP
6. The steel should not be overlapped of the junction points
-)11 1)
7. Not more than 1/3rd of the bars should be A5113 2A".
curtailed at a given section

8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dia radially & circumferentially for both directions
0 125 c/c curtail alternate radial bars 0 1.85m & again
curtail alternate bors 0 2.80 m from the edge and continue
Top dome 125mm thick
tt1e remaining bars Phenol' with
r fly proof ventilat
ri:ZinZt CI man hole
/ LINVJ)

11..1 1.
(I)

ii RCCIadder
400mm wide Ring Beam 200x250
20 ain steel 4-16mmv
*-2 L-8 mmv 150 c/c
ig
6"D`10 B <73 b-
-...., b V 0

Steps300c/c
150 Thick Side Wall
900 \
G.I 1 :0
A\ 10 mm 150 c/c
2750 Vertical Outer & Inner face 8 mm 7 c c Hoop rings
inner&out r face in staggereu

150
I ncthoac
lornTio
Top mesh bothway-
.46,10 mm 125 c/.
fashion
200
bars

250
. . ...._ .,:-..,..: - ...,..,,,,. - .- 300 CC(1:4:8)
Sand Filling 300 Sand Filling
mirsou
40d 8100
Bottom mesh bothways
All dimensions are in 'mm'
10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover
slabs : 45 mm
sidewalls : 45 mm
Beam : 45 mm
4. SBC : 10 t/sqm
100 KL SUMP
5. All dimensions ore in 'mm' unless specified
\)
6. The steel should not be overlapped at the juriction points

7. Not more than 1/3rd of the bars should be 'AND '24.

curtailed at o given section

8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dio radially & circumferentially for both directions
Co 125 c/c curtail alternate radial bars 2.00m & again
c;irtail .lternate bars 3.00 m from the edge and continue Top dome 125mm thick
the remaining bars Phenail with
F fly proof ventilat
CI man hole
2Nos)

RCCIadder
400mm wide Ring Beam 250x250
25 main steel 4-16mm7
4 66.
2 L-8 mm yr 150 c/c
.a6i) go. outh

Steps300c/c
200 Thick Side Woll
900

G.I 8000
/A\ 10 mm 200 c/c
2850 Vertical Outer & Inner face 8 mm OOc/c Hoop rings
inner uter face in stagger
Top mesh bothways fashi.
10 10 mm ( 125 c/c 200
150 allrnm0150c/c
hauncbrs

250

!. 300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 8700

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Cleor Minimum Cover
slabs : 45 mm
sidewalls : 45 mm
Beam : 45 mm
4. SBC : 10 t/sqm
120 KL SUMP
5. All dimensions are in 'mm' unless specified

6. The steel should not be overlapped at the junction points

7. Not more than 1/3rd of the bars should be

curtailed at a given section 1,1t.v \\1,

7-N4-1N15
8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

 L.W.L +25.00

CA)

8200

Conditions:
1.Grade of Concrete: M30
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
side walls :45mm
A POW \MA I )

Top&Bottoam slabs:45mm A
s

Columns :45mm
Footings :50mm ki01 13 eq7 )1

4.AII dimensions are in 'mm' unless specified

5.The steel should not be overlapped at the junction points
6.Not more than 1/3rd of the bars should be curtailed at a given section
7.Provide RCC stair case-M30 with RCC railing
40KL OHBR SHAFT
25.00 M STAGING
SBC of Soil 18t/m2
 5200

10 V150c/c BOTH FACES of Vertical

10 V150c/c BOTH FACES

DETAIL 'P' CIRCUMFERENTIAL
G.L
300X2500 Top mesh bothways 12mm@l00c/c Mesh

8200
12 i@100c/c CIRCULAR Bottom Mesh bothways 25j@100c/c MESH
RINGS UPTO 1.30M FROM
OUTER EDGE

SECTIONAL ELEVATION OF RAFT

la @100c/c MESH 25 V100c/c MESH

12 1.@100c/c CIRCULAR
RINGS UPTO 1.30M FROM
OUTER EDGE

TOP REINFORCEMENT BOTTOM REINFORCEMENT

10T@150 BOTH FACES Conditions:

1.Grade of Concrete: M30
VERTICAL IN SHAFT
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
10T@150 BOTH FACES side walls :45mm
CIRCUMFERENTIAL Top&Bottoam slabs:45mm
10"(@150 BOTH FACES Columns :45mm
Footings :50mm
// 300X2500 4.AIl dimensions are in 'mm' unless specified
5.The steel should not be overlapped at the
junctions
6.Not more than 1/3rd of the bars should be
2 500 curtailed at a given section

3c c INtiroNAD-C1-
k

0 600
0
tn , 15 V-1 6 -0 )-0
c6
0 C.0 (1:4:8)
0
40KL 0.H.B.R SHAFT
DETAIL 'P' 25.00 M STAGING
SBC OF SOIL 18T/M2
 Zs+

8 @150c/c bothways upto 1000

0
R=8910 0
0

2L-8 @200c/c 8 150c/c as meridonial and circumferential ste- Curtail Alt. Bars of
meridonial reinforcement @ 2.Omt from edge and Bain curtail alternate
bars @ 3.Omt from edge. The remaining bars continue

R=3925

N.!

4Y160 C 10 @ 150 c/c hoops Inner & Outer

200
8@1.)0 bothways

8 @150 c/c inclined staggered

8 @150c/c as meridonial and circumferential
steel, curtail alternate bars @1.30mt from
edge and again curtail alternate bars @2.0mt
from edge. The remaining ars continue

450

s..
O 4Y4-20+4Y-1-20

3 124' 13crttorr)

2L-8T@200c R=2600

Conditions:
1.Grade of Concrete: M30
2.Grade of Steel(Tor40):Fe415
3.Clear minimum cover
side walls :45mm
Vt AN% A424

S
Top&Bottoam slabs:45mm
Columns :45mm
Footings :50mm
4.All dimensions are in 'mm' unless specified i
5.The steel should not be overlapped at the
junctions
(CP
ortjtoit5 \Alz.
6.Not more than 1/3rd of the bars should be NAV.)
curtailed at a given section

Wind Speed 45m/sec

40KL OHBR-Shaft 25mt Stg.

SBC of Soil 18t/m2
8mm dia radially & circumferentially for both directions
125 c/c curtail alternate radial bars 1.75m & again Top dome 125mm thick
curtail alternate bars 0 2.65 m from the edge and continue
the remaining bars
Phenail with
fly proof ventilat
CI man hole
2Nos)
Top dome UPTO 1M(150 th.)

0
RCCladder
0 400mm wide Ring Beam 200x250
(NJ
main steel 4-12mmiv
S
2 L-8 mm v 150 c/c
7,50 0

Steps300c/c
150 Thick Side Wall
900

G.I 7000
10 mm 150 c/c
4\'\ 2550 Vertical Outer & Inner face 8 mm 5c/c Hoop rings
inner outer face in
Top mesh bothways stagg red fashion
10 mm 125 c/c 200
150 1Omm0150c/c
hauncbrs

" 250
e.. 300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 7600

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover 1.1
slobs : 45 mm
sidewalls : 45 mm
85KL SUMP
BP:om : 45 mm
4. SBC : 10 t/sqm
5. All dimensions ore in 'rrim . unless specified

6. The steel should not be overlapped of the junction points

7. Not more than 1/3rd of the bars should be

curtailed at a given section

8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dia radially & circumferentially for both directions
125 ,.c/c curtail alternate radial bars 1.85m & again
curtail alternate bars 2.80 m from the edge and continue
Top dome 125mm thick
tile remaining bars Phenail with
fly proof ventilat
CI man hole
2Nos)

Ring Beam 200x250

main steel 4-16mmv
"-2 L-8 mm -or 150 c/c
15-0

Steps300c/c
150 Thick Side Wall
900

G.I 0
10 mm 150 c/c
/2C\ 2750 Vertical Outer & Inner face 8 mm 7 c/c Hoop rings
inner&out r face in staggere
Top mesh bothway fashion
10 mm 125 c/ 200
150 10mm0150o/c
aunt burs

250
300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 8100

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover
slobs : 45 mm
sidewolls : 45 mm
Beam : 45 mm
4. SBC : 10 t/sqm
100 KL SUMP
5. All dimensions are in 'mm . unless specified

6. The steel should not be overlapped at the junction points

7. Not more than 1/3rd of the bors should be

curtailed of a given section

8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dia radially & circumferentiolly for both directions
0 125 c/c curtail alternate rodiol bars 0 2.00m & ogoin
..Iternate bars 0 3.00 m from the edge and continue Top dome 125mm thick
the remaining burs Phenail with
fly proof ventilat
CI man hole
2Nos)

RCCladder
400mm wide Ring Beam 250x250
main steel 4-16mm -qr
2 L-8 mm -gr 150 c/c
2So outs

900
fr 200 Thick Side Wall
Steps300c/c

G.I 8000
A\ 10 mm @ 200 c/c
2850 Vertical Outer Sc Inner face 8 mm OOc/c Hoop rings
inner uter face in stagger
Top mesh bothways fashi
10 10 mm 125 c/c 200
150 iernm0150c/c
ounchbrs

250
e.
;, 300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 8700

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grode of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover
slabs : 45 mm
sidewolls : 45 mm
Beom : 45 mm
4. SBC : 10 t/sqm
120 KL SUMP
5. All dimensions are in 'mm' unless specified

6. The steel should not be overlapped at the junctioi points

7. Not more thon 1/3rd of the burs should be

curtailed of a given section

8. As per IS 3370, the max. spocing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dia radially & circumferentially for both directions
125 c/c curtail alternate bars 0 2.75m & again
curtail olternate bars 4.1m from the edge and continue
the remaining bars Phenail with
fly proof ventilator CI man hole
125 2Nos)

Top dome(125)
it
0 Beam 300x300 main steel 4-16mm
tO
co 2 L-8 mm 0150 c/c

300
f
500/
Steps300c/c
Lal 10 mm 200 c/c 0 mm 100
vertical in & outerface Hoop rings
11 000 1 inn erArn r Cl/ 0/F Pipe Line
face in 200 Inlet connections
Top mesh bothways staggered fut
2100 10 mm 125c/c
RCCladder
40mwide duck foot bend

250
; 300 c.c(1:4:8)

L = 4C,d 200
12000
bottommesh bothways
10 mm 1;1- 125c/c
NOTE :-
1. Grade of concrete : M30
2. Grade of steel(Tor 40) : Fe415
Note: As per IS 3370, the
3. clear minimum cover maximum spacing of
V\ Acp -MArag ( 1
slabs : 45 mm
reinforcement should not
sidewolls : 45 mm
Beam : 45 mm exceed 300 mm or thickness
4. SBC : 18 t/sqm of section whichever is less P'
5. All dimensions are in 'mm' unless specified
psot eA.Przu-sIgf
1
4.r-A
6. The steel should not be overlapped at the junction points Aos)1 5 2g6\
7. Not more than 1/3rd of the bars should be 200KL SUMP
curtailed of a giien section
8mm dia radially and circumfrential for both
directions 0125mmc/c Curtail alternate
bars@ 2.5 m and again Curtail alterna Phenail with
bars03.75 mts and again from the edge
and continue the remaining bars f fly proof ventilator
CI man hole
2Nos)
Top dome (125 mm)

125 mm thick
Top dome Top beam (bxd) 300x300
main steel 4-16mm
2 L-8 mm@150 c/c
300
Steps300c/c
500 10 m m 150 c/c inrvand CI D/F pipe line
O u :er face Inlet connections
G.l 10000
/A\ 1 2mm01 25mmc/c
3650 Hoop rings inner& 250mm side wall
outer faces in
Staggered fashion
Top mesh bothways
RCC Ladder duck foot bend
10 mm 125 c/c
15 400 mm wide

250
f 300 CC(1:3:6)

200
10800
Haunch bottom mesh both ways 10mm dia 125mm c/c
200x200
Note:
1. Gradeof Concrete :M30 SCHEME : MVS to Kondapuram and other
2. Grade of Steel (Tor 40) : Fe415 habitations
3. Clear minimum cover
slabs : 45MM
side walls
Beam
: 45MM
: 45MM 250 KL SUMP if App/oved
4. SBC : 10 T/SQM
5. All dimensions are in 'mm' unless specified.
6. The Steel should not be overlapped M
at the junction points
7. Not more than 1/3rd of the bars should
1'5 AN :\170611)
be curtailed at a given section
8. As per IS 3370, the maximum spacing of 1/37 C
Reinforcement should not exceed 300mm or
thickness of section whichever is less