BUCKET ELEVATOR SPECIFICATION FORM

1 OF 2

Company: ________________________________________Contact:____________________________
Address:_____________________________________________________________________________
Phone: _____________________Fax:_____________________E-mail:___________________________
Down-Leg Discharge
Bonnet w/ Internal Wear
Liner
Head Section 1. Current Bucket Size:_________________________________________

Up-Leg Bonnet
2. Current Bucket Style:_____________________Material______________

Head Pulley 3. Bucket Manufacturer:________________________________________

Head Shaft and

Bearing
4. Bucket Spacing on Belt:______________________________________

5. Number of Bucket Rows:_____________________________________

6. Product Being Elevated:______________________________________

Discharge Throat
and Throat Plate
7. Product Density (Cubic Foot):__________________________________

8. Moisture Content :____________________________________________

9. Oil or Fat Content:___________________________________________

10. Particle Size:______________________________________________

Elevator Belt and

11. Product Temperature:_______________________________________
Buckets

12. Head Pulley Diameter:______________________________________

13. Head Pulley Face Width:______________________________________

14. Head Shaft Diameter:_______________________________________

Elevator Leg Casing
and Trucking

15. Head Shaft RPM:__________________________________________

Inspection
Door

16. Motor Horsepower:_________________________________________

Boot
Section 17. Boot Pulley Diameter:_______________________________________
Up-Leg Inlet
Hopper
18. Feed Inlet, Up or Side:_______________________________________

19. Feed Inlet, Opening Dimensions:________________________________

Boot Clean-Out slide

20. Bucket Elevator Manufacturer:________________________________

21. Required Capacity:_________________________________________

Boot Shaft and
Take-Up Bearing
22. Current Capacity:__________________________________________

86 Tel: +1.14.79.9191 +1.800.288.2726 Fax: +1.14.79.5880 www.tapcoinc.com

 Bucket Elevator SPECIFICATION FORM
2 of 2

Company: ________________________________________Contact:____________________________
Address:_____________________________________________________________________________
Phone: _____________________Fax:_____________________E-mail:___________________________

23. Height of Elevator:______________________________________________________

28 24. Depth of Leg Casing:___________________________________________________

25. Spacing Between Leg Casings:____________________________________________

31
32 27. Overall Width of Elevator:________________________________________________
29

28. Depth of Bonnet:_______________________________________________________

30 29. Width From Head Shaft to Throat inlet:_____________________________________

24

23
25
30. Dimensions of Discharge Spout:___________________________________________
27

35
38 31. Distance From Head Shaft Centerline Down to Top of Discharge Throat:____________

33 36 32. Distance From Head Shaft Centerline Down To Discharge Spout:_________________

33. Height of Up-Leg Inlet Hopper:___________________________________________

34 37
39

34. Height From Bottom of Elevator to Bottom of Up-Leg Inlet Hopper:________________

35. Depth of Up-Leg Inlet Hopper:____________________________________________

36. Height of Down-Leg Inlet Hopper:_________________________________________

37. Height From Bottom of Elevator to Bottom of Down-Leg Inlet Hopper:____________

38. Depth of Down-Leg Inlet Hopper:_________________________________________

39. Height From Bottom of Elevator to Boot Shaft:_______________________________

CIRCLE HEAD PROFILE:

B C D E F
OTHER

Tel: +1.314.739.9191 +1.800.288.2726 Fax: +1.314.739.5880 www.tapcoinc.com 87