PR1001/L - PR1005/L

1.0A FAST RECOVERY RECTIFIER

Features
· Diffused Junction
· Fast Switching for High Efficiency
A B A
· High Current Capability and Low Forward
Voltage Drop
· Surge Overload Rating to 30A Peak
· Low Reverse Leakage Current
C
· Plastic Material: UL Flammability D
Classification Rating 94V-0

DO-41 Plastic A-405

Mechanical Data Dim Min Max Min Max
· Case: Molded Plastic A 25.40 ¾ 25.40 ¾
· Terminals: Plated Leads Solderable per B 4.06 5.21 4.10 5.20
MIL-STD-202, Method 208
C 0.71 0.864 0.53 0.64
· Polarity: Cathode Band
D 2.00 2.72 2.00 2.70
· Marking: Type Number
All Dimensions in mm
· DO-41 Weight: 0.35 grams (approx.)
· A-405 Weight: 0.2 grams (approx.)
“L” Suffix Designates A-405 Package
No Suffix Designates DO-41 Package

Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristic Symbol PR PR PR PR PR Unit

1001/L 1002/L 1003/L 1004/L 1005/L
Peak Repetitive Reverse Voltage VRRM
Working Peak Reverse Voltage VRWM 50 100 200 400 600 V
DC Blocking Voltage VR
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 V
Average Rectified Output Current
IO 1.0 A
(Note 1) @ TA = 75°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load IFSM 30 A
(JEDEC Method)
Forward Voltage Drop @ IF = 1.0A VFM 1.2 V
Peak Reverse Current @ TA = 25°C 5.0
IRM
100 mA
at Rated DC Blocking Voltage @ TA = 100°C
Reverse Recovery Time (Note 3) trr 150 250 ns
Typical Junction Capacitance (Note 2) Cj 15 8.0 pF
Typical Thermal Resistance Junction to Ambient RqJA 75 K/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C

Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. See figure 5.

DS26008 Rev. A-2 1 of 2 PR1001/L - PR1005/L

 1.0 10

I(AV), AVERAGE FWD RECTIFIED CURRENT (A)

IF, INSTANTANEOUS FWD CURRENT (A)

0.8

1.0
0.6

0.4
0.1

0.2

Single phase half-wave Tj = 25°C

60 Hz resistive or inductive load Pulse width = 300 µs
0 0.01
25 50 75 100 125 150 175 200 0.6 0.8 1.0 1.2 1.4
TA, AMBIENT TEMPERATURE (°C) VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 1 Forward Derating Curve Fig. 2 Typical Forward Characteristics
30 100
IFSM, PEAK FORWARD SURGE CURRENT (A)

Tj = 25°C
Pulse Width 8.3ms
f = 1MHz
Single Half-Sine-Wave
(JEDEC Method)

Cj, CAPACITANCE (pF)

20

PR1001 - PR1004
10
PR1005 - PR1007

10

0 1
1 10 100 1 10 100
NUMBER OF CYCLES AT 60 Hz VR, REVERSE VOLTAGE (V)
Fig. 3 Peak Forward Surge Current Fig. 4 Typical Junction Capacitance

trr
+0.5A
50Ω NI (Non-inductive) 10Ω NI

Device
Under (-)
Test 0A
(+)
50V DC Pulse
Approx Generator -0.25A
(-) (Note 2)

1.0Ω (+)
Oscilloscope
NI (Note 1)

Notes: -1.0A
1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF.
2. Rise Time = 10ns max. Input Impedance = 50Ω. Set time base for 50/100 ns/cm

Fig. 5 Reverse Recovery Time Characteristic and Test Circuit

DS26008 Rev. A-2 2 of 2 PR1001/L - PR1005/L