Company name:
Created by:
Phone:
Date: 31/10/2017
Position Qty. Description
1 CR 10-4 A-A-A-E-HQQE
Product No.: 96500982
Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)
enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – all
other wetted parts are in stainless steel.
A cartridge shaft seal ensures high reliability, safe handling and easy service and access. Power
transmission is via a rigid split coupling. Pipework connection is via oval flanges with internal Rp
threads.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
Liquid:
Printed from Grundfos Product Centre [2017.06.042] 1/6
Company name:
Created by:
Phone:
Date: 31/10/2017
Position Qty. Description
Pumped liquid: Water
Liquid temperature range: 253 .. 393 K
Liquid temperature during operation: 293 K
Density: 998.2 kg/m³
Technical:
Speed for pump data: 2896 rpm
Rated flow: 10 m³/h
Rated head: 31.9 m
Primary shaft seal: HQQE
Approvals on nameplate: CE,TR
Curve tolerance: ISO9906:2012 3B
Materials:
Pump housing: Cast iron
EN-JL1030
ASTM A48-30 B
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Bush material: NONE
Installation:
Maximum ambient temperature: 333 K
Max pressure at stated temp: 16 bar / 120 °C
16 bar / -20 °C
Flange standard: OVAL
Pipe connection: Rp 1 1/2
Flange size for motor: FT115
Electrical data:
Motor type: 90SB
IE Efficiency class: IE3
Rated power - P2: 1.5 kW
Power (P2) required by pump: 1.5 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 220-240D/380-415Y V
Rated current: 5,45/3,15 A
Starting current: 850-930 %
Cos phi - power factor: 0,87-0,82
Rated speed: 2890-2910 rpm
Efficiency: IE3 84,2%
Motor efficiency at full load: 84.2 %
Motor efficiency at 3/4 load: 84.5 %
Motor efficiency at 1/2 load: 83.1 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Others:
Label: Grundfos Blueflux
Minimum efficiency index, MEI ≥: 0.7
Net weight: 46 kg
Gross weight: 50 kg
Shipping volume: 0.09 m³
Printed from Grundfos Product Centre [2017.06.042] 2/6
Company name:
Created by:
Phone:
Date: 31/10/2017
Exploded view
36a
10a
8 9
10
10a
1 8 9
10
51
62
61
28a
113 69
2 105
18 3
2
100
28
28 36
7 23 66a 49
100
7a 7 76a 64
7a 76
65
45 4
26
60
37 49
64a
65
45 4a 80
47a
55 64d
49
64c
66
67
65
45 44a
37 37
26a
44b
6 6
26c
38a 38a 26b
25 25
39
38 38
12
35
Printed from Grundfos Product Centre [2017.06.042] 3/6
Company name:
Created by:
Phone:
Date: 31/10/2017
Sectional drawing
9 2
8 10a
10 28
2
113
105
61
18
62
51 100
60
69
64
65
4 45
37
49
64a 55
80 65
4a 45
47a
65
44a 45 37
64d
64c 6
44b
26a
26c
26b
66
67
25
38
38a
Printed from Grundfos Product Centre [2017.06.042] 4/6
Company name:
Created by:
Phone:
Date: 31/10/2017
Parts list CR 10-4, Product No. 96500982
Valid from 1.1.2011 (1152)
Pos Description Annotation Classification Data Part no. Qty. Unit
+ Motor 1 pcs
- Base cpl. 1 pcs
6 Base 1
12 Flange Thread: RP 1 1/2 2
25 Drain plug 1
35 Hex head screw Length (mm): 45 MM 4
Thread: M12
415 Gasket 2
- Pump head cpl. 1 pcs
2 Pump head 1
7 Coupling guard 2
7.a Thread cutting screw 4
- 18 Air vent screw 1
Plug
Spindle
23 Plug 1
28 Hex head screw Length (mm): 20 4
Thread: M8
76 Nameplate 1
76a Rivet 1
- Rubber module 1 pcs
20 Spring 4
37 O-ring 2
38 O-ring Diameter: 16,3 1
Material type: EPDM
Thickness: 2,4
38a O-ring Diameter: 5,3 1
Material type: EPDM
Thickness: 2,4
100 O-ring Diameter: 16,3 2
Material type: EPDM
Thickness: 2,4
- 8 Coupling cpl. 1 pcs
9 Hex socket head cap screw Designation: DIN 912 4
Length (mm): 25
Thread: M8
10 Shaft pin Diameter: 5 1
Length (mm): 26
10a Coupling half 2
26 Staybolt 4 pcs
36 Hex nut Thread: M16 4 pcs
55 Outer sleeve 1 pcs
66a Washer Designation: DIN 125 A 4 pcs
Internal diameter: 17
Outer diameter: 30
Thickness: 3
- 80 Chamber stack Bearing type: SIC 1 pcs
- Intermediate chamber cpl. 1
Guide vane
3 Top intermediate chamber
- 4 Intermediate chamber cpl. 2
Guide vane
Guide cup
Printed from Grundfos Product Centre [2017.06.042] 5/6
Company name:
Created by:
Phone:
Date: 31/10/2017
Pos Description Annotation Classification Data Part no. Qty. Unit
3a Intermediate chamber
45 Neck ring cpl.
65 Retainer
- 4a Intermediate chamber cpl. 1
Guide vane
Bearing plate
Bearing bush
Guide cup
3a Intermediate chamber
45 Neck ring cpl.
65 Retainer
26 Hex head screw 2
26.c Washer Designation: DIN 125A 2
Internal diameter: 8,4
Outer diameter: 16
Thickness: 1,6
26a Strap cpl. 2
36 Lock nut Thread: M8 1
- 44a Inlet part cpl. 1
Inlet part
Guide cup
45 Neck ring cpl.
65 Retainer
44b Inlet part 1
47a Bearing ring 1
49 Impeller cpl. 4
- 51 Shaft, spline, cpl. 1
Bar
62 Stop ring
64 Spacing bush Length (mm): 9.00 1
64.d Spacer 1
64c Spacing pipe Length (mm): 12.7 1
66 Wedge lock washer 1
69 Spacing pipe Length (mm): 29.05 2
69 Spacing bush Length (mm): 18.00 1
105 Shaft seal Material type: HQQE 1 pcs
Printed from Grundfos Product Centre [2017.06.042] 6/6
