Scribd
Upload
100 views1 page

Cadcam Report

This document contains instructions for a report assignment on CAD/CAM systems. It lists 6 questions to answer regarding the definition of CAD/CAM, benefits of CAD/CAM, reasons for implementing CAD systems, applications of CAD/CAM in industries, differences between surface and solid modeling, and programming codes for milling and turning. The document provides the course code, assessment type, question set number, spaces for the student's name and registration number, and spaces for the document to be prepared, checked, and verified by.

Uploaded by

firdaus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
100 views1 page

Cadcam Report

This document contains instructions for a report assignment on CAD/CAM systems. It lists 6 questions to answer regarding the definition of CAD/CAM, benefits of CAD/CAM, reasons for implementing CAD systems, applications of CAD/CAM in industries, differences between surface and solid modeling, and programming codes for milling and turning. The document provides the course code, assessment type, question set number, spaces for the student's name and registration number, and spaces for the document to be prepared, checked, and verified by.

Uploaded by

firdaus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

COURSE CODE : ASSESSMENT : SET

QUESTION
DJJ5032 REPORT NO: 1

NAME:___________________________________________ DATE:____________

REGIST NO. :_____________________________________

REPORT To be included in the report

INSTRUCTION : Answer ALL questions.

1. Definition of CAD/CAM.
2. Benefits of CAD/CAM to engineering design.
3. Explain reason for implementing CAD system.
4. Application of CAD/CAM in industries.
5. Difference Between surface modeling and solid modeling.
6. List out programming code for miiling and turning

PREPARED BY: CHECKED BY: VERIFIED BY:

(HAIZAL BIN MOHD HAMZAH)

You might also like