Fiber Optic Cable

Listed Gel-Free, LSZH, Loose Tube Cable

(LL Series)
AFL LL-Series Gel-Free fiber optic cables are designed for use in traditional network
communication infrastructures deployed in environments requiring the performance
of outside plant cabling, while offering the safety of a listed low smoke zero halogen
solution. Applications in confined spaces such as tunnels and mine shafts require low
smoke zero halogen materials to enhance life safety and minimize damage to sensitive
electronic equipment in the event of a fire. Additionally, AFL’s product line incorporates
the latest dry water-absorption technology within the fiber-containing buffer tubes which
results in user-friendly handling of fibers during routing and termination.

Temperature Range Features Specifications

Operating: -40ºC to +70ºC • OFN(C)G-LS allows for use in OSP • OFNG-LS Listed, CSA-FT4, IEEE1202
Storage: -40ºC to +75ºC and inside plant pathways and UL1685
• Gel-free buffer tubes reduce fiber prep • Meets requirements of NFPA 130 and
Installation: -30ºC to +70ºC termination time 502 for use in fixed guideway transit
• SZ-stranded cable core for easy systems and road tunnesls
Crush Resistance mid-span access of fibers • ANSI/ICEA, S-104-696, Telcordia
Armored: 440 N/cm (250 lbs/in) • UV-stabilized outer jacket for long-term and GR-20-CORE
Non-armored: 220 N/cm (125 lbs/in) performance in outdoor applications • Sunlight Resistant Jacket
• 6 to 288 fibers allow for specific cable • Oil Res II Compliant Jacketing System
choices for multiple applications • Zero Halogen Per MIL PRF 85045

Rodent-deterrent Jacket Cable Components

Option Available
LSZH Jacket
Optical fiber
Gel-free loose buffer tube
Optional corrugated steel armoring
FRP central member
Rip cord
Water-blocking system

Optical Information
MAXIMUM ATTENUATION OVERFILL LAUNCH MIN. GIGABIT ETHERNET MIN.
(DB/KM) BANDWIDTH (MHZ•KM) LINK DISTANCE (METERS)
FIBER TYPE 850 NM 1300 NM 1310 NM 1550 NM 850 NM 1300 NM 850 NM 1300 NM
(6) 62.5/125 GIGA-Link™ 300 3.5 1.2 N/A N/A 200 600 300 550
(8) 62.5/125 GIGA-Link™ 1000 3.5 1.2 N/A N/A 350 600 500 1000
(5) 50/125 GIGA-Link™ 600 2.9 0.9 N/A N/A 500 500 600 600
(7) 50/125 GIGA-Link™ 2000 2.9 0.9 N/A N/A 500 800 750 2000
(L) 50/125 Laser-Link™ 300 2.9 0.9 N/A N/A 1500 500 900 550
(9) Single-mode N/A N/A 0.35 0.25 N/A N/A N/A 5000
Gigabit Ethernet Minimum Link Distances are based on “bandwidth”/modal dispersion constraints.
Actual link distances may be constrained by attenuation, depending on specific loss budget.

www.AFLglobal.com or (800) 235-3423 © 2015, AFL, all rights reserved. PP-1-00117, Revision 2, 11.20.17
Specifications are subject to change without notice.
189
 Fiber Optic Cable

Gel-Free LSZH Non-Armored Loose Tube

(LL Series Gel-Free SJ)
Mechanical Data
NOMINAL NOMINAL MAXIMUM TENSILE LOAD MINIMUM BEND RADIUS
NO. OF TUBES DIAMETER WEIGHT LBS (N) INCHES (CM)
FIBER INCHES LBS/1,000FT
AFL NO. COUNT FIBERS/ TUBE (MM) (KG/KM) SHORT TERM LONG TERM SHORT TERM LONG TERM
LL012C5101N1D 12 1/12 (4 fillers) 0.39 (9.8) 49 (73) 600 (2670) 180 (800) 7.8 (20) 3.9 (10)
LL024C5101N1D 24 2/12 (3 fillers) 0.39 (9.8) 49 (72) 600 (2670) 180 (800) 7.8 (20) 3.9 (10)
LL036C5101N1D 36 3/12 (2 fillers) 0.39 (9.8) 48 (72) 600 (2670) 180 (800) 7.8 (20) 3.9 (10)
LL048C5101N1D 48 4/12 (1 filler) 0.39 (9.8) 48 (71) 600 (2670) 180 (800) 7.8 (20) 3.9 (10)
LL060C5101N1D 60 5/12 (no fillers) 0.39 (9.8) 48 (71) 600 (2670) 180 (800) 7.8 (20) 3.9 (10)
LL072C6101N1D 72 6/12 (no fillers) 0.42 (10.6) 55 (82) 600 (2670) 180 (800) 8.4 (21) 4.2 (11)
LL096C8101N1D 96 8/12 (no fillers) 0.48 (12.3) 75 (118) 600 (2670) 180 (800) 9.6 (25) 4.8 (12)
LL144CC101N1D 144 12/12 (no fillers) 0.62 (15.8) 119 (178) 600 (2670) 180 (800) 12.4 (32) 6.2 (16)
LL216CI301N1D 216 18/12 (no fillers) 0.62 (15.8) 110 (163) 600 (2670) 180 (800) 12.4 (32) 6.2 (16)
LL288CO301N1D 288 24/12 (no fillers) 0.75 (19.1) 148 (220) 600 (2670) 180 (800) 15.0 (38) 7.5 (19)
Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below.
5 = 50/125 µm multimode GIGA-Link™ 600
7 = 50/125 µm multimode GIGA-Link™ 2000
6 = 62.5/125 µm multimode GIGA-Link™ 300
8 = 62.5/125 µm multimode GIGA-Link™ 1000

Gel-Free LSZH Single-Jacket Single-Armor

Loose Tube (LL Series Gel-Free SASJ)
Mechanical Data
NOMINAL NOMINAL MAXIMUM TENSILE LOAD MINIMUM BEND RADIUS
NO. OF TUBES DIAMETER WEIGHT LBS (N) INCHES (CM)
FIBER INCHES LBS/1,000FT
AFL NO. COUNT FIBERS/ TUBE (MM) (KG/KM) SHORT TERM LONG TERM SHORT TERM LONG TERM
LL012C5201S1D 12 1/12 (4 fillers) 0.50 (12.6) 95 (141) 600 (2670) 180 (800) 10.0 (25) 5.0 (13)
LL024C5201S1D 24 2/12 (3 fillers) 0.50 (12.6) 95 (141) 600 (2670) 180 (800) 10.0 (25) 5.0 (13)
LL036C5201S1D 36 3/12 (2 fillers) 0.50 (12.6) 94 (140) 600 (2670) 180 (800) 10.0 (25) 5.0 (13)
LL048C5201S1D 48 4/12 (1 filler) 0.50 (12.6) 94 (140) 600 (2670) 180 (800) 10.0 (25) 5.0 (13)
LL060C5201S1D 60 5/12 (no fillers) 0.50 (12.6) 94 (139) 600 (2670) 180 (800) 10.0 (25) 5.0 (13)
LL072C6201S1D 72 6/12 (no fillers) 0.53 (13.4) 105 (156) 600 (2670) 180 (800) 10.6 (27) 5.3 (13)
LL096C8201S1D 96 8/12 (no fillers) 0.59 (15.0) 127 (189) 600 (2670) 180 (800) 11.8 (30) 5.9 (15)
LL144CC201S1D 144 12/12 (no fillers) 0.73 (18.5) 182 (271) 600 (2670) 180 (800) 14.6 (37) 7.3 (19)
Note: Diameter and weight subject to change without notice
 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below.
5 = 50/125 µm multimode GIGA-Link™ 600 L = 50/125 µm multimode Laser-Link™ 300
7 = 50/125 µm multimode GIGA-Link™ 2000 9 = Single-mode
6 = 62.5/125 µm multimode GIGA-Link™ 300 Q = Non-zero dispersion-shifted single-mode
8 = 62.5/125 µm multimode GIGA-Link™ 1000 K = SM Futureguide SR-15e Bend Insensitive

www.AFLglobal.com or (800) 235-3423 © 2015, AFL, all rights reserved. PP-1-00117, Revision 2, 11.20.17
Specifications are subject to change without notice.
190