Scribd
Upload
147 views1 page

The Itu T First Single Mode Optical Fibre and Cable

The document discusses the history and development of ITU-T G.652, the first recommendation for single-mode optical fibers and cables. It was first created in 1984 to describe the characteristics of these fibers, which were then optimized for 1310 nm transmission. Over the years, the recommendation has been revised and expanded to incorporate new capabilities as technologies advanced, such as adding specifications for 1550 nm attenuation and chromatic dispersion. It now includes four categories of single-mode fiber to accommodate different application needs.

Uploaded by

Amir Salah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
147 views1 page

The Itu T First Single Mode Optical Fibre and Cable

The document discusses the history and development of ITU-T G.652, the first recommendation for single-mode optical fibers and cables. It was first created in 1984 to describe the characteristics of these fibers, which were then optimized for 1310 nm transmission. Over the years, the recommendation has been revised and expanded to incorporate new capabilities as technologies advanced, such as adding specifications for 1550 nm attenuation and chromatic dispersion. It now includes four categories of single-mode fiber to accommodate different application needs.

Uploaded by

Amir Salah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1


The ITU-T first single-mode optical fibre and cable

The first single-mode optical fibre was specified in Recommendation ITU-T G.652, Characteristics of a single-mode optical fibre and cable, and for this reason, the ITU-T G.652 fibres are often
called, “standard single-mode fibres”. These fibres were the first to be widely deployed in the public network and they represent a large majority of fibres that have been installed. The
agreements that led to the first publication formed a key foundation. To the modern optical networks that are the basis of all modern telecommunications.

Recommendation ITU-T G.652 describes the geometrical, mechanical. And transmission attributes of a single-mode optical fibre and cable which has zero-dispersion wavelength around 1310
nm. This fibre wasoriginally optimized for use in the 1 310 nm wavelength region, but canalso beused in the 1 550 nm region. Recommendation ITU-T G.652 wasfirst created in 1984; several
revisions havebeen intended to maintain the continuing commercial success of this fibre in the evolving world of high-performance optical transmission systems.

Optical transmission systems


Over the years, parameters havebeen added to Recommendation ITU-T G.652. And the requirements havebeen made more stringent to meet the changes in market and technological
demands, and in manufacturing capability. An example is the addition of a requirement for attenuation at 1550 nm in 1988. In that year, the chromatic dispersion parameters and requirements
werealso defined.

Some other examples include the addition of low water peak fibres (LWP) with negligible sensitivity to hydrogen exposure. And the addition of requirements for PMD. However at the advent of
these new capabilities and perceived needs, there was a consensus that some applications. Would need these attributes for advanced technologies, bit rates, and transmission distances;
however, there were also applications that would not need these capabilities. Therefore, some options had tobe maintained.

For this reason, it wasagreed tocreate different categories of ITU-T G.652 fibres. At the present time there are four categories, which aredistinguished on the PMDQ link design value
specification. And whether the fibre is LWP or not, i.e. water peak is specified (LWP) or it is not specified (WPNS).

A non-normative Appendix in Rec. ITU-T G.652 gives representative values of attenuation and chromatic dispersion, which canbe taken as the basis for the design of concatenated optical fibre
links in accordance with the guidelines outlined in Supplement 39 to the ITU-T G-series Recommendations. The same Appendix gives an indication of the maximum link length at various
channel. Bit rates allowed by different values of Polarization Mode Dispersion (PMDQ).

You might also like