0% found this document useful (0 votes)
525 views2 pages

Toshiba Sa 400

The Toshiba SA-400 is an integrated stereo receiver from the 1970s. It has 5 ICs, 1 FET, and 7 transistors powering FM and AM radio as well as phono, auxiliary, and tape inputs. It produces 30W of power on 4 ohm speakers with a frequency response of 20-40,000Hz. The tuner section has an FM sensitivity of 2.5uV and an AM sensitivity of 20uV.

Uploaded by

Peltan Andras
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
525 views2 pages

Toshiba Sa 400

The Toshiba SA-400 is an integrated stereo receiver from the 1970s. It has 5 ICs, 1 FET, and 7 transistors powering FM and AM radio as well as phono, auxiliary, and tape inputs. It produces 30W of power on 4 ohm speakers with a frequency response of 20-40,000Hz. The tuner section has an FM sensitivity of 2.5uV and an AM sensitivity of 20uV.

Uploaded by

Peltan Andras
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TOSHIBA SA-400

SPECIFICATIONS
GENERAL
Semiconductor: 5 IC's, 1 FET, 7 transistor's, 10 diodes
Tuning range:FM; 88-108 MHz, AM; 530-1,605 kHz
Power source:AC 100/120/220/240V, 50/60 Hz
Control: Volume, bass, treble, balance, selector (AM/FM-mono/FM-auto/Phono/Aux), mode
(Stereo/Mono), loudness (On/Off), tape monitor, MFR, Tuning
Antenna: FM; 300/75Ohm terminals, AM; Ferrite core antenna, external antenna terminals
Connector: PHONO; AUX. Inputs (phono jack); tape input and output via PIN jacks and parallel,
single-connection 5-pin DIN jack; screw terminals
for main speakers plus screw terminals for extension speakers; headphone jack; unswitched AC
outlet; 300Ohm and 75Ohm, FM antenna connection; input and output for 4-channel adaptor
Indicator: FM-ST indicator, FM/AM tuning meter
Cabinet: Walnut finished wood cabinet
Dimensions: 420(W) x 125(H) x 285(D) mm (16j x4%"x11%")
Weight: 8.2 kg (18 lbs.)
Accessory: FM feeder antenna, PIN-plug, owner's manual
PERFORMANCE Audio section
Power output (each channel driven, total): IHF Music power at 0.8°% distortion;
30W (4Ohm), 37W (8Ohm), 20W (16Ohm)
Continuous power at 0.8% distortion; 22W (4Ohm), 30W (8Ohm), 17 (16Ohm)
Frequency response: 20-40,000 Hz -3 dB
Power bandwldth: 20-40,000 Hz (IHF, 0.8%)
Signal-to-Nolse ratio:pHONO; 65 dB,AUX; 75 dB
Input sensitivity (for rated output): PHONO; 3.0 mV 47kOhm
AUX; 200 mV 100 kOhm TAPE; 200mV 100 kOhm
Hum: PHONO; 50 mV AUX; 10 mV
Damping factor: 26 at 8Ohm
Tone control: Bass; ±10 dB at 100 Hz, Treble; ±10dB at 10kHz, Loudness: +10 dB at 100 Hz
Residual noise: 0.8 mV at 8Ohm

-Tuner section
FM: Sensitivity: 2.5µV 300Ohm (IHF), Capture ratio. 2dB (IHF), Selectivity: 60 dB
Image rejection: 50 db, IF rejection: 80 dB, Spurlous rejection: 40 dB FM stereo separatlon: 35 dB
SCA rejection: 50 dB
AM: Sensitivity: 20µV (IHF), Image rejection: 35 dB, IF rejection: 30 dB

You might also like