(
(A division of SSSPL)
)
Presents
Security Electric
y
Fencingg
Main Product
Security Electric Fence
P d t Features
Product F t
¾ Differential voltage output technology: every wire has
voltage, have the differential voltage between the two
adjacent wires.
¾ LCD or LED indicate the working state and the voltage
on every wire of fence. Electrical Characteristics
¾ High/low voltage switch manually, long-distance Power supply : AC180V-240V 50Hz
equipment auto switch function. System
y p
power consumption
p : 10 Watt ¾ Operating
p g
environment Temperature：-40 to +50Ԩ
¾ Short circuit, break and tamper alarm, Self-inspection Relative humidity ：≤95%
System for equipment fault
Output parameter:
¾ Waterproof casing and downward appearance design Output peak voltage: 5KV～10KV (7.5 kV～15kV
leading the industry development
development. O t t low
Output l voltage:
lt 700～1000V
700 1000V
¾ RS 485 bus control, keypad, computer, network and Peak current of pulse: <10A
multiple long distance management solution. Pulse duration: ≤0.1s
Pulse interval time: 1s
¾ DC12V, NC/NO dry contact alarm output, can work Max quantity of electricity of pulse: 2.5mC
2 5mC
with other modern security products. Max energy of pulse: ≤5.0J
Advantage of using Electric Fence
9 The object of electric fencing is to keep bad guy outside protective area by giving electric shock through the
charged fence wire. Properly installed and grounded electric fence is an effective, economical way to keep safety
9 Electric fence is a psychological barrier、 physical barrier
9 Cost effective
9 Low maintenance
9 Efficient
Theory of Electric Fence
The shock current travels through the body and into
the earth ground where they are standing
standing.
The effect of the shock on the people depends
on the amount of shock current,
the duration of the shock,
and the body weight of the person
person.
Interface Specification
System Diagram
Installation Mode ‐ 1
Mode one : Install on top p of the wall
Install the electric fence on top of wall, the height of fence wall should be above 1.8meters, the wire pole/rod
may have welding ,clip or buried the three modes, should choose suitable mode according to the fence
structure condition.
For example,
example install at the steel fence,
fence can take the welding,
welding install at the concrete wall,
wall can take buried
mode to make sure stable, artistic, may use other modes also.
Installation Mode ‐ 2
Mode two :
The installation attaches on the fence or top or inside, the fence wall directly withstanding the pressure and
wire tension, before installation, please make sure the structural strength of the wall, if unreliable, should
reinforce in advance.
The metallic conductor wire from the front end of electric fence spacing to the wall should be smaller than
700mm
Installation Mode ‐ 3
Mode three : stand alone electric fence
I t ll the
Install th electric
l t i fence
f aroundd the
th building,
b ildi b
because th height
the h i ht is
i above
b 1800
1800mm, th wire
the i number b reachesh
8-20, the strength of the wire to the terminal rod/pull rod tensity must be big, hence, terminal rod/ pull rod must
have enough strength, and the embedment must be stable. If the soil is solid, may directly bury the wire of
terminal rod and pull rod ends to underground 60cm to do fixed. If the rigidity of terminal wiring rod is
insufficient,, should increase the support
pp rod.
Although the middle pull rod does not withstand the density of wire, but must support the pressure of multiple
wires. Therefore, also needs to install it stable. May take buried mode installation.
Accessories
Keypad Terminal Rod Insulator Pull Rod Insulator Tensioner Alloy Wire
High Voltage Wire Universal Pedestal Middle Pull Rod Fixation Siren-Speaker Warning Lighting
Terminal Insulator
Lightning Arrester F
Fence Warning
W i Signs
Si L
Luminated
i t d Signs
Si Wi Wi Linker
Wire-Wire Li k
Fixed Clip
Middle Pull Rod Terminal Rod
Installation of accessories
• Rods installation angle: ( the angle with wall)
• According to the site condition and the first party request(（0°、22.5°、45°、67.5°、90°、
• 112.5°、135°、157.5°、180°）and the inclined direction(inclination
• angle, camber angle, vertical or horizontal ) installation.
• According to the perimeter condition: if resident area, school nearby, suggested by inclination
angle or vertical installation, spacious area suggested to install by camber angle, if the height of
wall is above 2.5meters,take horizontal installation.
• According to the protection object: if prevent from outside invasion, suggest camber angle
installation if prevent from interior climbing,
installation, climbing suggest inclination angle installation.
installation
Installation of accessories
• Terminal rod/terminal rod insulator installation
• Fix the terminal rod insulator on the terminal rod through terminal insulator clip, considering the
distance is longer, the pulling strength is bigger, every 100 meters or big corner and divided zone
must be set a terminal rod .
Installation of accessories
• Middle pull rod/ insulator installation. The middle pull
insulator assembles on the rod through screws or use pinlock
to fix it. Should note the direction of installing, usually every
20 meters to set a middle pull rod.
• Tensioner installation The middle tensioner usually hang on
the front of electric fence, when install alloy wire, penetrates
the wire from the tensioner side’s round hole, aim and pass
the middle hole, finally gets out from another side round hole.
See the Picture. Note, don’t make the tight line excessive,
heat expanded and cold contracted, it maybe break in winter
weather.
Installation of accessories
• Lightning arrester installation
• Firstly fix the lightning arrester on the top of terminal rod, then through the own nuts fixing on the frame, the
lightning arrester usually installs on top of pulse energizer, every zone must install two lightning arresters.
Installation of accessories
• Alloy wire connection
• Connect it by wire linker, need connect the lead end to
penetrate the wire linker, then use nut to contract wire
in the wire linker.
Warning signs installation
According to the condition, every 10 meters set as one warning signs.
Installation of accessories
Grounding/earth (3 ---> 2)
grounding request: according to “GB/T 7946-2008”, earth principle and weak electricity separated. The
electric fence system includes: controller high voltage output earth, lighting arrester earth, protective earth
output,
t t the
th three
th ki
kinds
d off earth.
th Hi
High
h voltage
lt earth
th and
d lightning
li ht i arrester
t earthth can share
h th
the same earth,
th
but must separate from protective earth, and the earth pole distance is above 10meters, the earth pole
depth of burying is above 1.5m, the resistance value of weak electricity should be below 4Ω, the
resistance of high voltage earth should be below 10Ω, the lightning arrester earth connects reliably by
square
q millimeter copper
pp wires.
Underground wire layout Electric fence needs underground wire layout, needs the rated voltage 15KV
high voltage insulated conductor, penetrate the insulated threading tube.
Electric fence underground layout, should avoid high voltage insulated conductor, as the underground is
usually moist
moist, it is hard to keep good insulation strength at the tie
tie-in.
in if tie-in
tie in avoidless,
avoidless should strengthen
the tie-in part insulativity, for example, use the Silastic envelope, or change the tie-in above the ground.
Installation Case
Installation Case
Installation Case
Installation Case
Contact Us
Contact Us
Smile Security and Surveillance Pvt. Ltd. [SSSPL],
y [ ],
AnexSECURE Surveillance Solutions Division,
# 21/2, MRI Building, First Floor,
14KM, Old Madras road, Bhattarahalli,
Bangalore 560049, India
Tel: +91 80 2561 4773/4/5/6
/ / /
Fax: +91 80 2561 4666
www anexsecure com
www.anexsecure.com
www.sssl.co.in
