Scribd
Upload
538 views1 page

Compliance Sheet For Feeder Pillars

This document is a compliance checklist for feeder pillar specifications. It lists 14 specifications for the feeder pillars and assesses compliance as either "Complied", "Not Complied", or provides remarks. Some of the specifications assessed as not complied include the minimum warranty for anti-corrosive paint being only 18 months instead of the required 5 years at sea territories and the panels only meeting Form 01 requirements instead of the specified Form 3b. The document also lists 13 individual feeder pillars and assesses them each as compliant.

Uploaded by

Hamad Gul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
538 views1 page

Compliance Sheet For Feeder Pillars

This document is a compliance checklist for feeder pillar specifications. It lists 14 specifications for the feeder pillars and assesses compliance as either "Complied", "Not Complied", or provides remarks. Some of the specifications assessed as not complied include the minimum warranty for anti-corrosive paint being only 18 months instead of the required 5 years at sea territories and the panels only meeting Form 01 requirements instead of the specified Form 3b. The document also lists 13 individual feeder pillars and assesses them each as compliant.

Uploaded by

Hamad Gul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Compliance

Doc No. Description


Complied Not Complied Remarks
SPECIFICATIONS
1.0 Feeder Pillars
Supply, installation testing and commissioning of Feeder Pillar made with 16 SWG sheet
die-cast almunium/ fiber with E-Coat Epoxy primer, ultra durable powder
topcoat & must be anti corrisive housing with approved color and having
1.1 specified circuit breakers, C.t, Multimeters, Surge Supressor, Indication Lights, as Steel ,Epxoxy Polyester Resin
shown on drawing Including Lighting Control Relay, Power Supply for each
Feeder Pillar, along with Base of all feeder pillars. Each and every accessories
must be of imported type.
1.2 The minimum warranty of anti corrisive paint should be of 5-years at the sea territory. No 18 Months only
1.3 Type Tested Panel Minimum of Form 3b ComplyingWith IEC-60439-1 No Form 01 only its IP 66
1.4 Brand Names of F.P: Schneider/ABB/Siemens/GE/Rittal or Equivalent Yes Schneider
1.5 Brand Names of Breakers: Schneider/ABB/Siemens/GE/Terasaki or Equivalent Yes Schneider
2.0 Brand Names of Terminal: Phoenix Contact/WAGO/Enrelec or Equivalent.. Yes Klemsan Turkey
3.0 Brand Names of Multimeter : Schneider/ABB/Siemens/GE or Equivalent. Yes Schnieder/Entes
4.0 Brand Names of Cable Glands: Hawke/Cooper/CMP/Hoffman or Equivalent. Yes Imported China
Brand Names of Junction Box: Klippn/Rose/Rittal/Hammond/Honeywell/
4.1 Not our Scope
WeidmMuller/Hensel
All installation/testing/commissioning method shall comply the Shell-DEP & IEC
5.0 No Supply Only
standards Refer Summary Page.
6.00 F.P-01 Yes
6.01 F.P-02 Yes
6.02 F.P-03 Yes
6.03 F.P-04 Yes
6.04 F.P-05 Yes
6.05 F.P-06 Yes
6.06 F.P-07 Yes
6.07 F.P-08 Yes
6.08 F.P-09 Yes
6.09 F.P-10 Yes
6.10 F.P-11 Yes
6.11 F.P-12 Yes
6.12 F.P-13 Yes

You might also like