Scribd
Upload
1K views2 pages

Drillmec Hydraulic Drilling Rig Package Model Hh300: Price: Please Contact Mr. Tommaso Brovelli

This document summarizes the specifications of the Drillmec HH300 hydraulic drilling rig package. The rig is semitrailer mounted and designed to operate in temperatures from -20°C to +40°C. It has a maximum pull of 272 metric tons and drill floor height of 7.3 meters from ground level. Technical details are provided about the hoisting system, substructure, hydraulic top drive, pipe handling system, rig instrumentation, power supply, mud pumps, and well control equipment. For pricing and additional details, contact Mr. Tommaso Brovelli.

Uploaded by

dave_8814
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

Drillmec Hydraulic Drilling Rig Package Model Hh300: Price: Please Contact Mr. Tommaso Brovelli

This document summarizes the specifications of the Drillmec HH300 hydraulic drilling rig package. The rig is semitrailer mounted and designed to operate in temperatures from -20°C to +40°C. It has a maximum pull of 272 metric tons and drill floor height of 7.3 meters from ground level. Technical details are provided about the hoisting system, substructure, hydraulic top drive, pipe handling system, rig instrumentation, power supply, mud pumps, and well control equipment. For pricing and additional details, contact Mr. Tommaso Brovelli.

Uploaded by

dave_8814
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DRILLMEC HYDRAULIC DRILLING RIG PACKAGE MODEL HH300

Semitrailer mounted high mobility rotary drilling & workover rig Drillmec HH300 fully hydraulic operated.
The rig is located in URUGUAY and can be visited upon request.
The rig and its accessories are designed to operate in climate temperatures from -20°C to +40°C and are
designed to satisfy the requirements of API RP 500.
Technical data
• Drill pipe stands handling Range 3 (single) and range 3 casing
• Max pull 272 metric ton
• Max pull down 20 metric ton
• Drilling floor height from ground level 7,3 m

Price: Please contact Mr. Tommaso Brovelli ([email protected])

The hoisting system is based on telescopic mast fabricated in compliance


with API 4F, operating as an hydraulic hoist.
TELESCOPIC MAST
Maximum pull up is 272 metric ton (600,000 lbs), pull down 30 metric ton
(60,000 lbs)

Drill floor height 7.71 m (25.3 ft)


SUBSTRUCTURE Clear height under rotary beams 7 m (23 ft)
DC racking capacity 18 Lengths of 6 ½” Drill Collars ; 3 Lengths of 8” DC

Built in Top Drive System made by DRILLMEC driven by 3 top head


HYDRAULIC TOP DRIVE hydraulic motors with max. pull up 272 metric ton, max. pull down 20
metric ton and max torque 36.200 lbf·ft

Automatic vertical pipe handling system remotely controlled from driller


PIPE HANDLING SYSTEM
cabin.

RIG INTRUMENTATION Data acquisition system & drilling instrumentation made by Drillmec.

TORQUE WRENCH, AUTOMATIC


Included in DRILLMEC HH-Series rigs
POWER SLIPS, POWER TONG

Three (03) Diesel generator sets, each 1470HP, for a total continuous
RIG POWER SUPPLY
power of 4400 HP
Make : M&I electric
Number of generators can be connected in parallel on PCR: 3
PCR – SCR
P.C.R. motor drivers quantity: 2
Number of motors the S.C.R. system can run simultaneously: 2

Three (03) Triplex Mud Pumps, type 12T1600, with the following
features:
TRIPLEX MUD PUMPS
- Rated input: 1193 Kw (1600 hp)
12T1600 DC - 5000PSI
- Max stroke per minute: 120 SPM

Complete mud System mounted on oilfield skid with a total capacity


MUD SYSTEM
of 250 m3

Complete set of 13 5/8” BOP stack – Please get in touch for more
WELL CONTROL EQUIPMENT
information

DOWN HOLE TUBOLAR One Set of 5” DP G-105 (12060 ft in total),


MATERIAL One set of HWDP 5” (620 ft)

You might also like