Automatic Control Systems
Lecture-1
Basic Concepts of Classical control
Emam Fathy
Department of Electrical and Control Engineering
email: [email protected]
1
What is Control System?
• A system Controlling the operation of another
system.
• A system that can regulate itself and another
system.
• A control System is a device, or set of devices
to manage, command, direct or regulate the
behaviour of other device(s) or system(s).
2
Definitions
System – An interconnection of elements and devices for a desired purpose.
Control System – An interconnection of components forming a system
configuration that will provide a desired response.
Process – The device, plant, or system under control. The input and
output relationship represents the cause-and-effect relationship of the
process.
Input Process Output
3
Definitions
Controlled Variable– It is the quantity or condition that is measured
and Controlled. Normally controlled variable is the output of the control
system.
Manipulated Variable– It is the quantity of the condition that is varied
by the controller so as to affect the value of controlled variable.
Control – Control means measuring the value of controlled variable of
the system and applying the manipulated variable to the system to
correct or limit the deviation of the measured value from a desired
value.
4
Examples
Car cruise control
http://auto.howstuffworks.com/cruise-control3.htm
Cables
Electronically-
controlled
Vacuum actuator
Other examples
• Anti-lock braking system (ABS)
– Major components of the typical ABS system
• four speed sensors (one at each wheel)
• electronic control unit (ABS computer)
• a hydraulic control unit
http://www.samarins.com/glossary/abs.html
Other examples
• Vehicle suspension system
– a system that will absorb the energy of the
vertically accelerated wheel, allowing the frame
and body to ride undisturbed while the wheels
follow bumps in the road
http://auto.howstuffworks.com/car-suspension.htm
Types of Control System
• Natural Control System
– Universe
– Human Body
• Manmade Control System
– Vehicles
– Aeroplanes
9
Types of Control System
• Manual Control Systems
– Room Temperature regulation Via Electric Fan
– Water Level Control
• Automatic Control System
– Room Temperature regulation Via A.C
– Human Body Temperature Control
10
Type of systems
Control system configuration can be categorized into two:
1)Open-Loop
Input Output
Control System
2)Closed-Loop
Input Output
Control System
Types of Control System
Open-Loop Control Systems
Open-Loop Control Systems utilize a controller or control actuator to
obtain the desired response.
• Output has no effect on the control action.
• In other words output is neither measured nor fed back.
Input Output
Controller Process
Examples:- Washing Machine, Toaster, Electric Fan
12
Types of Control System
Open-Loop Control Systems
• Since in open loop control systems reference input is not
compared with measured output, for each reference input there
is fixed operating condition.
• Therefore, the accuracy of the system depends on calibration.
• The performance of open loop system is severely affected by the
presence of disturbances, or variation in operating/
environmental conditions.
13
Type of systems
Open-loop system
A generic open-loop system
Type of systems
Open-loop system
Advantage of
Open-loop system
Simple Cheap
Type of systems
Open-loop system
Disadvantage of
Open-loop system
Sensitive to Inability to correct
disturbance for disturbance
Solution
Use closed-loop system
Types of Control System
Closed-Loop Control Systems
Closed-Loop Control Systems utilizes feedback to compare the actual
output to the desired output response.
Input Output
Comparator Controller Process
Measurement
Examples:- Refrigerator, Iron
17
Types of Control System
Feedback Control System
• A system that maintains a prescribed relationship between the output
and some reference input by comparing them and using the difference
(i.e. error) as a means of control is called a feedback control system.
Input + error Output
Controller Process
-
Feedback
• Feedback can be positive or negative.
18
Type of systems
Closed-loop system
A generic closed-loop system
Type of systems
Closed-loop system
Advantage of
Closed-loop system
Less sensitive to Transient response
noise, disturbances and steady-state error
and changes in can be controlled
environment easily
Transient response and steady-state error can be controlled
by redesigning the controller. The process of redesigning is
called compensating the system and the resulting hardware
is a compensator
Type of systems
Closed-loop system
Disadvantage of
Closed-loop system
More complex More expensive
Type of systems
Open loop vs. Closed-loop system
• How do we choose OL or CL?
– Criticality of application
• The need to monitor output
• The need to control the output
• The need for reduced error or zero error
• Cost / budget
• Safety
Types of Control System
Multivariable Control System
Temp Outputs
Humidity Comparator Controller Process
Pressure
Measurements
23
Types of Control System
Servo System
• A Servo System (or servomechanism) is a feedback control system in
which the output is some mechanical position, velocity or acceleration.
Antenna Positioning System Modular Servo System (MS150)
24
Types of Control System
Linear Vs Nonlinear Control System
• A Control System in which output varies linearly with the input is called a
linear control system.
u(t) Process y(t)
y(t ) 2u(t ) 1 y(t ) 3u(t ) 5
y=3*u(t)+5
y=-2*u(t)+1
35
5
30
0
25
-5
y(t)
y(t)
20
-10
15
-15
10
-20 5
0 2 4 6 8 10 0 2 4 6 8 10
u(t) 25
u(t)
Types of Control System
Linear Vs Nonlinear Control System
• Linear control System Does not
exist in practice. Adhesion Characteristics of Road
0.4
• Linear control systems are
Adhesion Coefficient
idealized models fabricated by
0.3
the analyst purely for the
simplicity of analysis and design. 0.2
• When the magnitude of signals 0.1
in a control system are limited to
range in which system 0
0 0.02 0.04 0.06 0.08
components exhibit linear Creep
characteristics the system is
essentially linear.
26
Types of Control System
Time invariant vs Time variant
• When the characteristics of the system do not depend upon time
itself then the system is said to time invariant control system.
y(t ) 2u(t ) 1
• Time varying control system is a system in which one or more
parameters vary with time.
y(t ) 2u(t ) 3t
27
Types of Control System
Continuous Data Vs Discrete Data System
• In continuous data control system all system variables are function of a
continuous time t.
x(t)
• A discrete time control system involves one or more variables that are
known only at discrete time intervals.
X[n]
n
28
Types of Control System
Deterministic vs Stochastic Control System
• A control System is deterministic if the response to input is predictable
and repeatable.
x(t) y(t)
t t
• If not, the control system is a stochastic control system
z(t)
t 29
Types of Control System
Adaptive Control System
• The dynamic characteristics of most control systems
are not constant for several reasons.
• The effect of small changes on the system
parameters is attenuated in a feedback control
system.
• An adaptive control system is required when the
changes in the system parameters are significant.
30
Types of Control System
Learning Control System
• A control system that can learn from the
environment it is operating is called a learning
control system.
31
Classification of Control Systems
Control Systems
Natural Man-made
Manual Automatic
Open-loop Closed-loop
Non-linear linear
Non-linear linear
Time variant Time invariant
Time variant Time invariant
32
Examples of Control Systems
Water-level float regulator
33
Examples of Control Systems
34
Examples of Modern Control Systems
35
Examples of Modern Control Systems
36
End Of Lec 1
37
