Scribd
Upload
112 views8 pages

Loads: Calculation of Dead Load

The document details the design of a staircase slab with M20 concrete and Fe500 reinforcement. It includes the slab dimensions, load calculations, moment calculations, and reinforcement design. The slab is designed with 12mm diameter bars at 150mm c/c for both positive and negative moment reinforcement and 8mm diameter distribution bars at 200mm c/c along the width. Reinforcement ratios are checked to satisfy minimum requirements.

Uploaded by

Binod Raj Giri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
112 views8 pages

Loads: Calculation of Dead Load

The document details the design of a staircase slab with M20 concrete and Fe500 reinforcement. It includes the slab dimensions, load calculations, moment calculations, and reinforcement design. The slab is designed with 12mm diameter bars at 150mm c/c for both positive and negative moment reinforcement and 8mm diameter distribution bars at 200mm c/c along the width. Reinforcement ratios are checked to satisfy minimum requirements.

Uploaded by

Binod Raj Giri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 8

DESIGN OF STAIRCASE SLAB

Reinforcement Fe500 fy = 500.00 N/mm2


Concrete M20 fck = 20.00 N/mm2

width = 1.0668
Span, l = 2.53

Depth Estimation Take L/d = 22.5


d = 112.4
So, Take
and D = 125.0
clear cover = 15
Effective depth 104.00
Loads
Calculation of dead load
Riser R = 200
Tread T = 275
√(�2+�2) = 340.04
Effective span (c/c distance betn supports) = 2.53
Loads on going
Self weight of waist slab = 3.86
Self weight of steps = 2.5
Finishes = 1.1
Live load = 3
Total load = 10.46
Factored load Wu = 15.70

Loads on landing
Self weight of slab = 3.13
Finishes = 1.1
Live load = 3
Total load = 7.23
Factored load Wu = 10.84

Moment calculation
negative support Moment = 8.37
wu * l2 / 12 (max. value)

Positive span moment = 10.05


wu * l / 10 (for case of partial rigidity of supports)
2

Depth check from maximum moment criteria


M=0.1336
*fck*b*d2
for fe500
d = 61.29
Minimum reinforcement = 150.00
0.12% of Area
Negative Reinforcements

Ast = 198.53
Provide 12 mm ø bars @ 150.00 c/c 753.98
% compressive reinforcement = 0.60
Positive Reinforcements
Ast = 240.800
Provide 12 mm ø bars @ 150.00 c/c 753.982
% tensile reinforcement = 0.60 %
Check for deflection

Actual l/d 24.327


=
Ast,
0.319
/Ast,prov
req =

fs (0.58*fy*Ast, 92.62
req/Ast,pro)
=
MFt = 1.8
MFc = 1.1
Basic l/d = 26
Modified
l/d = 51.48

Distribution steel ( Along width )


Provide 8.00 mm ø bars @ 200.00 c/c 251.3274122872
Provided 0.20 % >0.12% hence ok
% area of
Reinforcement
steel summary
Positive reinforcement Provide 12 mm dia bars @ 150 mm c/c
Negative reinforcement Provide 12 mm dia bars @ 150 mm c/c
Distribution bars (Edge, top ) Provide 8 mm dia bars @ 200 c/c
m
m

mm

mm
mm

mm
mm
mm
m

KN/m2
KN/m2
KN/m2
KN/m2
KN/m2
KN/m2

KN/m2
KN/m2
KN/m2
KN/m2
KN/m2

KN-m/m

KN-m/m
< d provided ok -216295.311300797
mm2

mm2/m -180246.092750664
mm2/m

mm2/m -216295.311300805
mm2/m 753.982

IS 456:2000 fig 4
IS 456:2000 fig 5

> Assumed L/d ok


OK

mm2/m
Use what if analysis

use what if analysis

use what if analysis


tensile reinforcement

You might also like