Scribd
Upload
48 views10 pages

Amplitude Shift Keying: Sunny Babu

The document discusses Amplitude Shift Keying (ASK), a form of digital modulation where digital data is represented by variations in the amplitude of a carrier wave. ASK can be implemented with two amplitude levels as binary ASK or On-Off Keying. Multiple levels of ASK are also possible. The document covers the basics of ASK modulation generation and demodulation.

Uploaded by

Zahoor Abbas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views10 pages

Amplitude Shift Keying: Sunny Babu

The document discusses Amplitude Shift Keying (ASK), a form of digital modulation where digital data is represented by variations in the amplitude of a carrier wave. ASK can be implemented with two amplitude levels as binary ASK or On-Off Keying. Multiple levels of ASK are also possible. The document covers the basics of ASK modulation generation and demodulation.

Uploaded by

Zahoor Abbas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Amplitude Shift Keying

Sunny Babu
Introduction
Digital data, more specifically, the binary data changes the properties of
the carrier signal

• Amplitude
• Frequency
• Phase
Digital modulation
• In digital modulation, an analog carrier signal is modulated by a discrete signal

Changing amplitude, frequency or phase in proportional to the binary data, produces


digital modulated signal called

• Amplitude Shift Keying (ASK)


• Frequency Shift Keying (FSK)
• Phase Shift Keying (PSK)
ASK – Amplitude shift keying
• Amplitude-shift keying (ASK) is a form of modulation that represents
digital data as variations in the amplitude of a carrier wave.

• The amplitude of an analog carrier signal varies in accordance with


the bit stream (modulating signal), keeping frequency and phase
constant.

• The level of amplitude can be used to represent binary logic 0s and


1s.
Binary ASK(BASK) or On-Off Keying (OOK)
• Although we can have several levels (kinds) of signal
elements, each with a different amplitude, ASK is normally
implemented using only two levels. This is referred to as
binary amplitude shift keying.

• We can think of a carrier signal as an ON or OFF switch. In the


modulated signal, logic 0 is represented by the absence of a
carrier, thus giving OFF/ON keying operation and hence the
name given OOK.
OOK
MSK – Multiple shift keying
• The above discussion uses only two amplitude levels. We can have
multilevel ASK in which there are more than two levels. We can use
4,8, 16, or more different amplitudes for the signal and modulate the
data using 2, 3, 4, or more bits at a time.
ASK Generation
Demodulator Or Detector
• The demodulator determines the amplitude of the received signal
and maps it back to the symbol it represents, thus recovering the
original data.
Pros and Cons
Pros:
• ASK transmitter and receiver are simple to design.
• ASK needs less bandwidth than FSK.

Cons:
• ASK transmission can be easily corrupted by noise

Application:
• early telephone modem(AFSK)
• ASK is used to transmit digital data over optical fibre.

You might also like