IP PHONE SYSTEM

CooVox Series-U50
For Small and Medium Business
Quick Installation Guide

PW R
SYS
WA N
LAN
4
3
2
SLO T2 1
4
3
2
SLO T1 1

Co
IP Ph onoV ox
e Sy st
em

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

www.zycoo.com
Downloaded from www.Manualslib.com manuals search engine
 Table of Contents

1 Package Contents 02
2 Hardware Installation 02
2.1 Safety Precautions 03
2.2 Product Installation 05
2.3 Physical Connection 06
2.4 Led Definitions 07
3 Basic System Configuration 08
3.1 Web Login 08
3.2 Network Configuration 09
3.3 Choose the Module 10
3.4 Reset to factory 11
4 Further Configuration 12

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
 1 Package Contents
Thank you for purchasing ZYCOO IP phone system. These are the items
Included with your IP phone system purchase:

IP PBX Power Adaptor

Quick Installation Antenna(only for

Guide GSM Module)

Two mounting brackets

Warranty Card
and fittings

2 Hardware Installation
The followings are the instructions for setting up ZYCOO CooVox-
U50 IP PBX. Please refer to the illustration and follow the simple
steps below to quickly install your IP phone.

02

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
 2.1 Safety Precautions

Notes:
To avoid any device damage and bodily injury caused by improper
use, please observe the following rules.
Keep the power off during the installation.
Use only the power adapter provided with IP PBX.
Make sure that the supply voltage matches the specifications indicated on the rear
panel of IP PBX.
To avoid the electric accident, do not open or remove the cover of IP PBX when it is
working as well as off the power.
Before cleaning the device, cut off the power supply. Do not clean it by the
waterish cloth, and never use any other liquid cleaning method.

Site Requirements

PWR SYS ETH USB 1 2 3 4 1 2 3 4

SLOT1 SLOT2

To ensure normal operation and long service life of the device,

please install it in an environment that meets the requirements
described in the following subsection. Please keep a proper
temperature and humidity in the equipment room. Too high/low
humidity may lead to bad insulation, electricity leakage,
m e c h a n i c a l p ro p e r t y c h a n g e s a n d c o r ro s i o n s . To o h i g h
temperature may accelerate aging of the insulation materials and
can thus significantly shorten the service life of the device. For
normal temperature and humidity of the device, please check the
following table.

03

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
 Environment Temperature Humidity
Operating 0 C~40 C 10%~90%RH Non-condensing
Storage -40 C~70 C 5%~90%RH Non-condensing

Clearness

PWR SYS ETH USB 1 2 3 4 1 2 3 4

SLOT1 SLOT2
CooVox
IP Phone System

The dust accumulated on IP PBX can be absorbed by static

electricity and result in poor contact of metal contact points. Some
measures have been taken for the device to prevent static
electricity, but too strong static electricity can cause deadly
damage to the electronic elements on the internal circuit board. To
avoid the effect of static electricity on the operation of IP PBX,
please attach much importance to the following items:

Dust the device regularly, and keep the indoor air clean.
Keep the device well grounded and ensure static electricity has
been transferred.

Electromagnetic Interference

PWR SYS ETH USB 1 2 3 4 1 2 3 4

SLOT1 SLOT2
CooVox
IP Phone System

04

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
 Electronic elements including capacitance and inductance on the
device can be affected by external interferences, such as conducted
emission by capacitance coupling, inductance coupling, and
impedance coupling. To decrease the interferences, please make
sure to take the following measures:

Use the power supply that can effectively filter interference from
the power grid.
Keep the devices far from high-frequency, strong-current devices,
such as radio transmitting station.
Use electromagnetic shielding when necessary.

2.2 Product Installation

Module Installation

3 2
4 1
SLOT2

4
3 2 SLOT 1
4 1
3
2
1 AN T

This IP PBX can support installing two extension modules at the

same time.
Optional modules are as follows.
4FXS Module 2FXOS Module
4FXO Module 2GSM Module
1E1/T1 Module
1.Check if the module is clean and intact.
2.Please ensure power of IP PBX is cut off.
3.Please ensure the direction of the module is correct (ZYCOO-logo
side up).
4.Push the module into the module slot through the guide rail.
5.Tighten the locking screws on the both ends of the module.
05

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
 Caution:
Do not touch any device on the module, just to prevent the
module from being damaged by static electricity.
This operation must be done with power cut off. The module does
not support hot- plugging.

Desktop Installation
Please place the IP PBX on a steady platform

Caution:
Please set 5~10cm gaps around the device for air circulation
Please avoid any heavy thing placed on the device.

Rack Installation (Optional)

CooVox-U50 is not a standard 19-inch rack-mountable device, but

we can provide the mounting brackets to help you install the device
to the rack if necessary.

2.3 Physical Connection

CooVox-U50

PSTN
Power Adapter

4 3 2 SLOT2
1
4
3 2 SLOT 1
1
AN T
USB CO NS OL E
ET H DC 12V
RS T

Analog Phone

Router

06

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
 2.4 LED Definitions
Indication Function Status Explaination
On
PWR Power Status Off
Blink
SYS System Status Off
Blink
ETH Data Status Off
On
USB Data Status
Off

FXS

FXO

GSM

1-4(SLOT1) SLOT1 Status

E1/T1

BRI

FXS

1-4(SLOT2) SLOT2 Status

FXO

GSM

07

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
 3 Basic System Configuration

3.1 Web Login

Step 1. Connect a computer and the CooVox device in the same

network. IP address is usually in the 192.168.1.X range.
Step 2. Start a web browser. To use the user interface, you need a
PC with Internet Explorer (version 7.0 or higher), Firefox,
Chrome.
Step 3. Enter the default address “http://192.168.1.100:9999” of
the CooVox device into the URL address box.
Step 4. Enter the default username (admin) and password
(admin). Then click “Login” to enter the Web-based user
interface.

Default URL address: http://192.168.1.100:9999

Default Username: admin
Default Password: admin

08

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
 3.2 Network Configuration

Step 1. Go to Network Settings Network

Step 2. Configure the network information

There are three types of network connection. They are Static,
DHCP, PPPoE(Point-to-Point Protocol over Ethernet). You can find
detailed settings in the user manual.

09

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
 3.3 Choose the Module

Go to System Module Settings

When using the module except FXO/FXS/GSM, you need to set the
module parameters with the below page.

Module Type: Select the module type of the device slot.

FXS/FXO/GSM module Default type. You don’t need set anything

for these modules.

E1/T1 module

10

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
 ISDN BRI module

3.4 Reset to factory

To reset the IP address to the default IP Address “192.168.1.100”

(ETH) or reset the login password to default value, press the
hardware reset button at the front panel more than 5 seconds.
After the device is rebooted, you can login the management WEB
interface within the same subnet of 192.168.1.x.

Press the “Reset” button, and all the system data will be reset to
default; so if possible, back up the configuration file before reset.

11

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
 4 Further Configuration
Thank you for the purchase of ZYCOO products. The above steps
introduce simple configuration for CooVox – U50. For further
configuration, please refer to the user manual. If you have other
questions, please contact the local dealer or distributor from
which you purchased this product.

You can also browse our online FAQ resource at the ZYCOO Web site
first to check if it could solve your issue. If you need more support,
please contact ZYCOO support team.

ZYCOO online FAQ:

Http://www.zycoo.com/support

Support team mail address:

[email protected]

Copyright © Zycoo Co., Ltd. 2013

11

pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245

Downloaded from www.Manualslib.com manuals search engine
pon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245
Downloaded from www.Manualslib.com manuals search engine