510, 520

INTELLECTUAL
S Y S T E M
t h e f t p r e v e n t i o n

PRIZRAK
USER MANUAL
Please make sure that PUK code protec-
tion layer is intact

Please make sure that PUK code protection layer is intact

 Master Definitions

What is PIN code?.....................................................................................................................................
PIN code is a secret combination of original vehicle button(s) pressings.
PIN code needs to be entered prior to vehicle movement.

What is the Prizrak button?......................................................................................................................

Prizrak button is one or several original vehicle buttons used for entering the PIN code.

What is the Programming button?...................................................................................................

Programming button is the original vehicle button assigned by installation specialist
for theft prevention system programming (setting).

What is Immobilizer feature?...................................................................................................................

Immobilizer feature is a protective function that prevents vehicle from movement.

What is Anti HiJack feature?....................................................................................................................

Anti HiJack feature is hijacking protection function that locks the engine should the vehicle be hijacked
while the owner is securely away from the vehicle.

Seven advises or fast facts

see the last page

3
 Prizrak intellectual theft prevention system (hereinafter referred to as the Immobilizer) is designed
for vehicle theft prevention should such an incident occur while the vehicle is parked or should
hijacking be the case. Besides, the Immobilizer is equipped with additional service features:
automatic window closing, hood electro-mechanical lock control and vehicle central lock control.
The Immobilizer is to be installed only in the certified service center in accordance with the Tech-
nical Specification that can be found on the CD,
This present User manual applies for Prizrak-51x and Prizrak-52x Immobilizers where x is the kit
option ID.

Table of Contents

Глава I. Operation��������������������������������������������������������������������������������������������������������������5
Prizrak button and Programming button���������������������������������������������������������������������������������5
PIN and PUK codes��������������������������������������������������������������������������������������������������������������5
PIN code entering����������������������������������������������������������������������������������������������������������������6
Possible PIN code options�����������������������������������������������������������������������������������������������������6
Immobilizer feature��������������������������������������������������������������������������������������������������������������7
Anti HiJack feature���������������������������������������������������������������������������������������������������������������7
Maintenance mode���������������������������������������������������������������������������������������������������������������8
Additional features���������������������������������������������������������������������������������������������������������������9
Глава II. Settings�������������������������������������������������������������������������������������������������������������� 10
Changing the Immobilizer settings��������������������������������������������������������������������������������������� 10
Changing the PIN code������������������������������������������������������������������������������������������������������� 12
Programming example�������������������������������������������������������������������������������������������������������� 13
Глава III. Seven advises or fast facts������������������������������������������������������������������������������� 14

4
 Глава I. Operation

Prizrak button and Programming button

◊ Prizrak button is one or several original vehicle but- Vehicle buttons used as Prizrak button or Programming
tons used for entering the PIN code. You can change button will continue performing their original functions.
Prizrak button voluntarily. Please consult with your For example, if the window lifting button is used, window
installation specialist on the list of available buttons. regulator will be activated. You should not be concerned
◊ Programming button is one of original vehicle but- that multiple use of the button may cause the button
tons assigned by installation specialist for Immobilizer or its function to be lost. Mechanisms and feeds of mod-
programming. ern vehicles are equipped with secure protection systems.
Prizrak and Programming buttons may match

PIN and PUK codes
PIN code PUK code
PIN code is a secret combination of original vehicle PUK code completely replaces the PIN code but can-
button(s) pressings. PIN code needs to be entered prior not be changed during operation. PUK code is under
to vehicle movement. the protective layer on the plastic card. PUK code enter-
PIN code is a one-, two-, three- or four-digit number. ing is carried out by Programming button with 2-second
Each digit is a figure from 1 to 9. pause after each digit.
PIN code can be promptly changed numerous times
by both technical specialists during Immobilizer installa-
tion or by you during day-to-day vehicle use. Please use the PUK code only in case if you forgot
Upon Immobilizer installation the factory-set PIN code or lost the PIN code. Upon successful PUK code en-
is to be changed for the purposes of providing the proper tering you will be able to program a new PIN code.
secrecy level. If the PIN code is not changed, a beep
tone will be activated after factory-set PIN code entering
in order to remind the necessity of PIN code changing.

5
 PIN code entering
PIN code is entered with vehicle ignition and engine Please keep the pause of approximately 2 seconds
on by steadily pressing the Prizrak button. When enter- in between the digits. If you made a mistake while enter-
ing one of the PIN digits, please make sure that pressure ing the PIN code, please wait for longer than 3 seconds
or pause duration is no longer than 1 second. and re-enter the PIN code.
PIN code entering sequence
◊ Turn the ignition and engine on Enter the PIN code
◊ Wait for audible confirmation trill
Possible PIN code options
, , , , - b uttons are used as an example. Please counsel with your installation specialist
for the list of available buttons.
Single-button PIN code entering
One-digit PIN code: Two-digit PIN code:
~2 second pause

Multiple buttons PIN code entering

When entering the PIN code you need to keep in mind the button pressing sequence.
One-digit PIN code: Two-digit PIN code:
~2 second pause

6
 Immobilizer feature
Immobilizer feature is designed for preventing the ve- You do not need to enter the PIN code again if the igni-
hicle from being stolen from its parking area. You need tion has been off for less than 30 seconds.
to enter the PIN code each time prior to driving other-
wise the engine will be locked. You can turn the engine on prior to enter-
There are 2 different lock responses: ing the PIN code. But the driving can be be-
◊ The engine will be turned off right after the ve- gun only upon successfully entering the PIN
hicle starts moving if the Speed control* is on. code after the PIN confirmation audible tone
has been sounded.
◊ The engine will be turned off within 5 seconds af-
ter the ignition has been turned on if the Speed
control is off.
Anti HiJack feature
Anti HiJack is the function that prevents the vehicle ◊ The engine will be turned off upon a set time
from being hijacked or stolen from its parking area. interval after a certain number of brake pedal
Should there be an attempt to hijack the vehicle; the Im- pressings if the Speed control is off.
mobilizer will lock the engine while you are safely away The availability of these algorithms depends on the ve-
from the vehicle. hicle model features and Immobilizer program settings.
There are 2 different lock response algorithms: The distance covered or time interval length and number
◊ The engine will be turned off at a set distance of brake pedal pressings can be set by you in the Im-
covered by the vehicle from the moment when mobilizer settings. The distance can be set within 100 –
the ignition has been turned on and driver door 1000 meters range; time interval length can be set within
was opened if the Speed control* is on. 20 seconds – 3 minutes and 20 seconds; brake pedal
pressings number can be set in 1 to 7 range.
PIN code is to be entered when the ignition has been
off for longer than 30 seconds or after the driver’s door
had been opened.

*  In some rare cases this feature is not supported

depending on the vehicle make and model.

7
 entering will be activated. In order to prevent accidents
You can enter the PIN code when driving and warning the other vehicle owners, vehicle’s hazard
if the engine had not been locked prior to that. lights will be activated 10 seconds prior to engine locking.
Upon engine locking the hazard lights will remain on for
If the PIN code is not entered, Anti HiJack will respond 15 seconds or until the ignition is on.
by activating the locking mode. Prior to engine lock- The locking mode can be stopped at any moment
ing a sound alarm indicating the necessity of PIN code by entering the PIN code.
Maintenance mode
Maintenance mode is an operation mode when all theft In order to activate or deactivate the Maintenance
prevention and service functions of Immobilizer are tem- mode you need to do the following:
porarily deactivated. 1 Turn the ignition on Enter the PIN code and wait
When the ignition is turned on in Maintenance mode, for confirmation
an audible tone is sounded that reminds you on the fact 2 Press the Programming mode 6 times (start do-
that the Immobilizer is in maintenance mode. The au- ing it no later than 10 seconds after PIN code
dible tone can be turned off for secrecy level increase. entering).
Please wait for confirmation that you have successfully
Maintenance mode audible notification is to in- performed the actions:
form you that you need to deactivate the Main-
◊ 1 audible signal and 1 sound trill mean that
tenance mode when your car is out of the main-
the Maintenance mode is ON.
tenance.
◊ 2 audible signals and 1 sound trill mean that
the Maintenance mode is OFF.

8
 Additional features
The Immobilizer has additional features improving
the vehicle security level.

Automatic windows closing

The Immobilizer can be programmed so that the ve-
hicle’s windows are closed when the vehicle is locked

Hood electro-mechanic locks control

The Immobilizer allows closing an accessory hood lock
in time with vehicle locking and opening the hood lock
when the PIN code has been entered.

Central lock control

If your vehicle is not equipped with the following func-
tions:
◊ Doors locking during driving
◊ Doors unlocking upon turning the ignition
off They can be carried out by the Immobilizer

9
 Глава II. Settings

Changing the Immobilizer settings

When programming, please refer to Table 1 and its annotations
1 Turn the ignition on Enter the PIN code and wait as many times as it is necessary to change
for confirmation the current setting to the required one. When
2 Activate the Immobilizer setting mode by press- changing the option setting please note that
ing and releasing the programming button 12 the last setting is followed by the first setting.
times (start doing this not later than 10 sec- 6 Release the brake pedal. Now you can go to
onds after the PIN code has been entered). programming of another menu option or exit
If you have performed all the actions correctly, the setting mode.
the Immobilizer will notify you by 4 audible sig- 7 In order to start programming another
nals. menu option press and release the Program-
3 Select the menu option by pressing and releas- ming button as many times as it is needed
ing the Programming button as many times to navigate the menu to the required option.
as it corresponds with the menu option number. For example, in order to go from Option No. 2
The Immobilizer will notify you on the menu op- (Anti HiJack feature) to Option No. 6 (Sound
tion number by series of audible signals. confirmation of PIN code entering) press and re-
4 Go to menu option setting by pressing and hold- lease the Programming button 4 times.
ing the brake pedal. The Immobilizer will in-
form you on the option setting by series of au- You can stop programming and exit the setting mode
dible signals. Please note that their length will anytime by turning the ignition off.If no actions are taken
be changed during this process. within 60 seconds and the brake pedal has not been
pressed, the Immobilizer will automatically exit the set-
5 In order to change the option setting, please ting mode. When the mode is no longer on, an audible
press and release the Programming button trill will be sounded.

10
 Table 1. Immobilizer settings (Menu 2)
Current option setting *
No. Description Factory
default On Off Range
settings
1 Immobilizer feature On 1 2 —
2 Anti HiJack feature On 1 2 —
3 Speed control On 1 2 —
4 Number of brake pedal pressings 3 — — From 1 to 7
5 Anti HiJack feature response delay 1 — — From 1 to 10
6 PIN code entering audio confirmation On 1 2 —
7 Maintenance mode audio indication On 1 2 —
8 Central locking when driving Off 1 2 —
Central lock unlocking when ignition is turned
9 Off 1 2 —
off
10 Automatic windows closing On 1 2 —

* – number of audio signals is indicated.

Annotations to Table 1
p. 1 “Immobilizer feature” allows turning the Immobi- the brake pedal pressings number necessary for Anti Hi-
lizer feature on or off. Jack feature responding. If the Speed control is on, the set-
p. 2 “Anti HiJack feature” allows turning the Anti HiJack ting of p. 4 does not affect anything.
feature on or off. Страница 12
p. 3 “Speed control” allows setting the lock activation p. 5 “Anti HiJack feature response delay” allows setting
algorithm for Immobilizer and Anti HiJack features. the distance before locking (Speed control is on) or time
p. 4 “Number of brake pedal pressings” allows setting before locking (Speed control is off). The time is set by
11
20 second intervals; the distance is set by 100 meter p. 8 “Central locking when driving” allows turning
sections. the automatic central locking feature on or off when driv-
For example, if the option setting is 3, then: ing.
◊ Locking activation delay is 60 seconds; p. 9 “Central lock unlocking when ignition is turned off”
◊ Distance before locking is 300 meters. allows turning the automatic central lock unlocking upon
p. 6 “PIN code entering audio confirmation”allows turn- ignition deactivation on or off.
ing PIN code entering audio confirmation on or off.
p. 10 “Automatic windows closing” allows turning au-
p. 7 “Maintenance mode audio indication” allows turn- tomatic windows closing during vehicle locking on or off.
ing Maintenance mode audio indication on or off.
Changing the PIN code
1 1. Turn the ignition on 7 7. Wait for confirmation:
2 2. Enter the PIN code (if the PIN code is lost ◊ 2 audible signals and a sound trill mean that
please enter the PUK code with Programming the PIN code has been changed and the Im-
button) and wait for confirmation. mobilizer has left the PIN code changing mode.
3 3. Press the Programming button 14 times. ◊ Sound alert means that the PIN code has not
Wait for confirmation by 1 audible signal. been changed and the Immobilizer has left
4 4. Set the new PIN code. You can use any ve- the PIN code changing mode. A mistake has been
hicle button but the Immobilizer perceives only made when entering the new PIN code confirma-
the  buttons that are  confirmed by  the  audible tion and it is necessary to repeat the PIN code
signal. changing procedure starting from p. 1.
5 5. Wait for confirmation by 1 audible signal.
6 6. Re-enter the new PIN code. You can exit the PIN code changing mode anytime
by turning the ignition off.

12
 Programming example
Objective: Y ou would like to change the factory settings of the Immobilizer. For example, you would like to increase
the Anti HiJack activation distance from 100 to 300 meters.
Execution:
1 Turn the ignition on. 5 Enter option No. 5 by pressing and holding
2 Enter the PIN code and wait for confirmation. the brake pedal. The Immobilizer will inform
3 Enter the Immobilizer setting mode by pressing you on the option setting by repeated single au-
and releasing the Programming button 12 times dible signals because the current (factory set)
(start doing it no longer than 10 seconds after option setting is 1 (which stands for 100 meters
entering the PIN code). If you have performed distance).
all the actions correctly, the Immobilizer will no- 6 Change option No. 5 setting by pressing and re-
tify you of it with 4 audible signals. leasing the Programming button twice, there-
4 Select the programming option for setting fore increasing the option setting by 2 (1+2=3).
the Anti HiJack activation distance. According The Immobilizer will inform you on the option set-
to Table 1 “Immobilizer settings” option No. 5 ting with series of 3 audible signals (300 meters).
is to be selected. To do so, press and release 7 Exit option No. 5 by releasing the brake pedal.
the Programming button 5 times. The Immobi- The Immobilizer will inform you on the current
lizer will inform you on the selected menu option menu option number with series of 5 audible
number by series of 5 audible signals. signals.
8 Exit the setting mode by turning the ignition off.

13
 Глава III. Seven advises or fast facts

 
I am certain of my safety when driving
«Immobilizer» - On «Anti HiJack» - Off
 Psolution
RIZRAK in theft prevention comprehensive
will be a shocking surprise for the
 car thief
If you are certain that your vehicle will not be hijacked, «Immobilizer» - Off «Anti HiJack» - On
just leave the Immobilizer feature on, which will prevent 
the vehicle from being stolen from its parking area and will Car thief’s goal is to start the vehicle’s engine and get away
spare you the necessity of entering the PIN code every time with the car by deactivating all the vehicle security comprehen-
Individuality

you open the driver’s door sive solution protection layers (car alarm, mechanical locking
unit, satellite system). PRIZRAK is the last line of defense.
 M y car is safely secured in its parking
area
Without compromising itself, it will allow the thief to start
the engine. It will even allow the thief to start driving, but the
«Immobilizer» - Off «Anti HiJack» - On countdown of meters covered will start. When it reaches zero,
 the engine will be stopped. What can a thief do then? – RUN!
If your vehicle is safely secured in its parking areas (ga-
rage, guarded parking lot). Do not waste time with en-
tering the PIN code. Start driving right after the engine
 Complete protection
«Immobilizer» - On «Anti HiJack» - On
starts. Anti HiJack will remind you that PIN code needs 
to be entered and will protect you while you drive.

 Mark your secure area  Don’t tell anyone

Improved Protec-

Set the distance of engine locking activation in meters. Should Always use the Maintenance mode when you put your
the vehicle be hijacked, this would get the thieves away from car for maintenance or simply visit a car wash etc. This
you and keep you safe. will spare you from telling your PIN code to anyone.
tion

Keep your PIN code as a secret. Change it as soon as it

 Go to the next level of secrecy
is compromised
Deactivate the audible PIN code entering confirmation.
Use as complex combination of digits and buttons for the
PIN code as you can. Key thing is to remember it.

14
For additional information please visit:
www.tecel.ru/en/

Technical support:
[email protected]
tel.:
+7 495 984 55 43
WWW.PRIZRAK.RU

PRIZRAK. YOUR CAR’S SECRET

TEC–6076–2