Scribd
Upload
195 views1 page

Technical Data Sheet: DIN Connectors

This document provides technical specifications for DIN connectors, including dimensions, materials, optical and mechanical properties, environmental requirements, suitable cable types, and packaging information.

Uploaded by

litoduter
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
195 views1 page

Technical Data Sheet: DIN Connectors

This document provides technical specifications for DIN connectors, including dimensions, materials, optical and mechanical properties, environmental requirements, suitable cable types, and packaging information.

Uploaded by

litoduter
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

DIN Connectors

All dimensions are in mm; tolerances acc. ISO 2768 m-H

Properties
DIN connector has a key for twist protection and is coupled with s screwed nut.

Interface
Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger OSI GmbH & Co. OHG

DIN, acc. to IEC 61754-3 and DIN 47256

Material for connectors


Ferrule : Zirconia ceramic/nickel silver, Ø 2.5 mm
Body : Brass, nickel plated

Optical data
Typical max.
Insertion Loss : S/M 0.20 dB 0.40 dB
M/M 0.20 dB 0.40 dB

Return Loss : S/M ≥45 dB(PC), ≥55 dB(UPC), ≥65 dB(APC)


M/M ≥30 dB

Mechanical data
Mating cycle ≥ 2000
Cable retention > 150N (depending to Cable type)

Environmental data
Operation temperature range -40°C to +85°C
Storage temperature range -40°C to +85°C

Suitable cables
Cable Types : Ø 0.9 ~ 3.5 mm

Coupling nut
M5.5 X 0.5mm
Outer Dimension Ø 6.7mm coupling nut

Packaging
Standard Packaging.

While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.

Draft Date Approved Date Rev. Engineering change number Name Date

Y.Zhang 31.03.3017 H.Jungbäck 31.03.2017 002 --- Y.Zhang 31.03.2017

Rosenberger OSI GmbH & Co. OHG Page


Tel.:+49 821 249249-0
www.rosenberger.com/osi; E-Mail: [email protected] 1/1

You might also like