Please visit

www.thermoscientific.
com/waterlibrary
for more product information.

Thermo Scien
Scientific Orion Ion Selective Electrodes
Ion Selective Electr
Electrodes (ISE) are easy to use and provide you the best performance and reliability

Ion Selective Electrodes

Measurement by ISE can be performed in virtually every laboratory. Titrations are quantitative analytical techniques for measuring
ISEs measure ion concentrations in samples such as water, food, the concentration of a species by incremental addition of a reagent
pharmaceuticals and biological samples. There have been many (titrant) that reacts with the sample species. Sensing electrodes
analytical methods that have been developed and published can be used for determination of the titration end point. Ion
world-wide for the use of ISEs. The variety of methods available is selective electrodes are useful as end point detectors because
the main advantage of using ISE technology. they are unaffected by sample color or turbidity.
Efficient and Economical Half Cell Ion Selective Electrodes
Electrode measurements are simpler and faster than other Solid-State Half-Cell ISE Fluoride, Chloride,
analytical techniques. Time consuming sample steps such as Epoxy body Cyanide, Silver-Sulfide,
Lead, Bromide,
filtration and distillations are rarely needed. Analysis time is typically Require separate reference Cadmium, Cupric,
under 1 minute. Typically the cost per test is only a few cents. Temperature range 0-80 ºC Iodide, Thiocyanate

Compared to other methods such as atomic absorption or ion Plastic Membrane Half-Cell ISE
Nitrate, Potassium,
chromatography, there is a small setup cost and it does not require PVC body
Calcium, Ammonium,
additional expensive readout equipment. Sample color or turbidity Require separate reference Fluoroborate
Temperature range 0-40 ºC
do not affect the measurement.
ROSS® Half-Cell ISE
Measurement Techniques Glass body
Sodium
Direct Measurement is a simple procedure for measuring a Requires ROSS half-cell reference
large number of samples. Each sample only requires one reading. Temperature range 0-100 ºC
Only a small sample volume is required. Calibration is performed
on a series of standards. The concentration is then determined by Combination Ion Selective Electrodes
Sure-Flow® Reference makes electrode easy to clean and long lasting
comparison to the standards. Ionic strength adjustor is added to
Ionplus® Sure-Flow® Combination ISE Fluoride, Chloride,
all solutions to ensure samples and standards have similar ionic Epoxy body
Cyanide, Silver-Sulfide,
Lead, Bromide,
strength, proper pH and reduce the effect of interfering ions. Temperature range 0-80 ºC Cadmium, Cupric, Iodide
Orion ISE meters calculate and store the calibration curves.
Ionplus Sure-Flow Combination Plastic Membrane ISE
Nitrate, Potassium,
Low Level Measurement is a similar method to direct PVC body
Calcium
Temperature range 0-40 ºC
measurement. It is recommended when the sample is not in
the linear response range. A minimum 3 point calibration is ROSS Sure-Flow® Combination ISE
recommended to compensate for the non-linear response. Glass body Sodium
Temperature range 0-100 ºC
Calibration is performed in one beaker reducing the chance of
cross contamination of the standards.
Various ISE Applications
Know Addition is a useful method for measuring samples since Agriculture
Nitrate, chloride, ammonia, potassium, calcium,
iodide, cyanide in soil, fertilizer and fedstuffs
calibration is not required. This method is recommended when
Calcium, carbon dioxide and ammonia in biological
measuring only a few samples, when samples have a high ionic Biomedical
cultures (not in vitro or in vivo)
strength (>0.1 M) or when there is a complicated background Dairy Products Chloride, fluoride, iodide, calcium, potassium
matrix. An aliquot of standard solution containing the measured Dental Fluoride, calcium in teeth and toothpaste
species is added to the sample. The sample concentration is Education Various ISEs in teaching and research labs
Food & Beverage Chloride, nitrate, sodium, calcium, potassium
determined by the changes in potential before and after the
Geology Fluoride and calcium in rocks
addition. Orion ISE meters automatically calculate the result.
Metal Plating Fluoride, copper, cyanide, chloride
Analate Subtraction is also a useful method for measuring Nitrate, chloride, fluoride, iodide, cyanide, calcium,
Plant Tissue
potassium and sodium
samples since calibration is not required. The electrodes are Power, Steam
Chloride, sodium and residual chlorine in boiler feeds
immersed in a reagent solution that contains a species that the Generators
electrode senses and then it reacts with the sample. It is useful Pulp and Paper Sodium, chloride, sulfide and calcium in liquors
Nitrate, calcium, sodium, potassium, bromide,
when sample size is small, for samples for which a standard is Soil
chloride, ammonia, fluoride
difficult to prepare, and for viscous or very concentrated samples. Nitrate, residual chlorine, fluoride, cyanide,
Water, Drinking
The method is not suited for very diluted samples. It is also sulfide, ammonia
Water, Sea Sodium, chloride, fluoride, nitrate, ammonia
necessary to know the stoichiometric ration between sample
Water, Waste Nitrate, ammonia, residual chlorine, sulfides
and standard.
Wine Potassium, sodium, fluoride, calcium

Thermo Scientific Orion Laboratory Products Catalog | Sourcebook 89

 Thermo Scientific Orion
Ion Selective Electrode Selection Guide
Ion Selective Electrodes

Optimum Required Reference

Temperature Reference Filling
Species Cat. No. Construction Measurement Range Range Electrode Solution Calibration Standards Required ISA
Ammonia 1 Gas sensing 5 x 10-7 to 1.0 M
9512BNWP 0 to 50 °C Included 951202 0.1 M NH4Cl / 951006 951211
standard (NH3) combination 0.01 to 17,000 ppm
Ammonia high Gas sensing 5 x 10-7 to 1.0 M
9512HPBNWP 1 0 to 50 °C Included 951209 0.1 M NH4Cl / 951006 951210
performance combination 0.01 to 17,000 ppm
Ammonium Plastic membrane 5 x 10-7 to 1.0 M 900002 inner/
931801 8 0 to 40 °C 900200 1000 ppm as N / 951007 –
(NH4+) half-cell 0.01 to 17,000 ppm 900018-WA outer
ionplus
Bromide (Br-) 5 x 10-6 to 1.0 M
9635BNWP 1 sure-flow solid 0 to 80 °C Included 900063 0.1 M NaBr / 943506 940011
ionplus Design 0.40 to 79,900 ppm
state combination
9435BN 2 Solid state 5 x 10-6 to 1.0 M 900002 inner /
Bromide (Br-) 0 to 80 °C 900200 0.1 M NaBr / 943506 940011
9435SC 3 half-cell 0.40 to 79,900 ppm 900003 outer
ionplus
Cadmium (Cd2+) 1 x 10-7 to 0.1 M
9648BNWP 1 sure-flow solid 0 to 80 °C Included 900061 Consult user guide 940011
ionplus Design 0.01 to 11,200 ppm
state combination
9448BN 2 Solid state 1 x 10-7 to 0.1 M 900002 inner /
Cadmium (Cd2+) 0 to 80 °C 900200 Consult user guide 940011
9448SC 3 half-cell 0.01 to 11,200 ppm 900003 outer
ionplus sure-flow
Calcium (Ca2+) 5 x 10-7 to 1.0 M 0.1 M CaCl2 / 922006
9720BNWP 1 plastic membrane 0 to 40 °C Included 900061 932011
ionplus Design 0.02 to 40,100 ppm 100 ppm CaCO3 / 923206
combination
Plastic membrane 5 x 10-7 to 1.0 M 0.1 M CaCl2 / 922006
Calcium (Ca2+) 9320BN 2 0 to 40 °C 900100 900011 932011
half-cell 0.02 to 40,100 ppm 100 ppm CaCO3 / 923206
-4 -2
Carbon Dioxide Gas sensing 1 x 10 to 1 x 10 M 0.1 M NaHCO3 / 950206
9502BNWP 1 0 to 50 °C Included 950202 950210
(CO2) combination 4.4 to 440 ppm 1000 ppm as CaCO3 / 950207
ionplus 0.1 M NaCl / 941706 940011 or
Chloride (Cl-) 5 x 10-5 to 1.0 M
9617BNWP 1 sure-flow solid 0 to 80 °C Included 900062 100 ppm Cl- / 941707 941709 /
ionplus Design 1.8 to 35,500 ppm
state combination 1000 ppm Cl- / 941708 CISA
0.1 M NaCl / 941706 940011 or
9417BN 2 Solid state 5 x 10-5 to 1.0 M 900002 inner /
Chloride (Cl-) 0 to 80 °C 900200 100 ppm Cl- / 941707 941709 /
9417SC 3 half-cell 1.8 to 35,500 ppm 900003 outer
1000 ppm Cl- / 941708 CISA
977010 /
9770BNWP 1 Solid state 1 x 10-7 to 3 x 10-4 M iodide reagent
Chlorine (Cl2) 0 to 50 °C Included None required 100 ppm as Cl2 / 977007
9770SC 3 combination 0.01 to 20 ppm 977011 /
acid reagent
ionplus
Cupric (Cu2+) 1 x 10-8 to 0.1 M
9629BNWP 1 sure-flow solid 0 to 80 °C Included 900063 0.1 M Cu(NO3)2 / 942906 940011
ionplus Design 6.4 x 10-4 to 6350 ppm
state combination
9429BN 2 Solid state 1 x 10-8 to 0.1 M 900002 inner /
Cupric (Cu2+) 0 to 80 °C 900200 0.1 M Cu(NO3)2 / 942906 940011
9429SC 3 half-cell 6.4 x 10-4 to 6350 ppm 900003 outer
ionplus
Cyanide (CN-) 8 x 10-6 to 1 x 10-2 M
9606BNWP 1 sure-flow solid 0 to 80 °C Included 900062 Consult user guide 951011
ionplus Design 0.2 to 260 ppm
state combination
9406BN 2 Solid state 8 x 10-6 to 1 x 10-2 M 900002 inner /
Cyanide (CN-) 0 to 80 °C 900200 Consult user guide 951011
9406SC 3 half-cell 0.2 to 260 ppm 900003 outer
0.1 M NaF / 940906
940909 /
ionplus 100 ppm F- / 940907
Fluoride (F-) 1 x 10-6 M to saturated TISAB II
9609BNWP 1 sure-flow solid 0 to 80 °C Included 900061 1 ppm F- w/ TISAB II / 040906
ionplus Design 0.02 ppm to saturated 940911 /
state combination 2 ppm F- w/ TISAB II / 040907
TISAB III
10 ppm F- w/ TISAB II / 040908
0.1 M NaF / 940906
940909 /
100 ppm F- / 940907
9409BN 2 Solid state 1 x 10-6 M to saturated TISAB II
Fluoride (F-) 0 to 80 °C 900100 900001 1 ppm F- w/ TISAB II / 040906
9409SC 3 half-cell 0.02 ppm to saturated 940911 /
2 ppm F- w/ TISAB II / 040907
TISAB III
10 ppm F- w/ TISAB II / 040908

Signifies a hazardous solution. See terms and conditions for important

Compliant with EPA testing method
shipping information at www.thermoscientific.com/water

90 Sourcebook | Thermo Scientific Orion Laboratory Products Catalog

 Ion Selective Electrodes
Optimum Required Reference
Temperature Reference Filling
Species Cat. No. Construction Measurement Range Range Electrode Solution Calibration Standards Required ISA
900002
Fluoroborate Plastic membrane 7 x 10-6 to 1.0 M
9305BN 2 0 to 40 °C 900200 inner / dilute Consult user guide 930711
(BF4-) half-cell 0.6 to 86,800 ppm
ISA outer
ionplus®
Iodide (I-) 5 x 10-8 to 1.0 M
9653BNWP 1 sure-flow® solid 0 to 80 °C Included 900063 0.1 M NaI / 945306 940011
ionplus Design 5 x 10-3 to 127,000 ppm
state combination
9453BN 2 Solid state 5 x 10-8 to 1.0 M 900002 inner /
Iodide (I-) 0 to 80 °C 900200 0.1 M Na / 945306 940011
9453SC 3 half-cell 5 x 10-3 to 127,000 ppm 900003 outer
ionplus Consult
Lead (Pb2+) 1 x 10-6 to 0.1 M 0.1 M Pb(ClO4)2 / 948206
9682BNWP 1 sure-flow solid 0 to 80 °C Included 900062 instruction
ionplus Design 0.2 to 20,700 ppm 0.1 M Na2SO4 / 948207
state combination manual
Consult
9482BN 2 Solid state 1 x 10-6 to 0.1 M 900002 inner / 0.1 M Pb(ClO4)2 / 948206
Lead (Pb2+) 0 to 80 °C 900200 instruction
9482SC 3 half-cell 0.2 to 20,700 ppm 900003 outer 0.1 M Na2SO4 / 948207
manual
ionplus sure-flow 7 x 10-6 to 1.0 M 0.1 M NaNO3 / 920706 930711 or
Nitrate (NO3-)
9707BNWP 1 plastic membrane 0.1 to 14,000 ppm 0 to 40 °C Included 900046 1000 ppm N / 920707 930710 /
ionplus Design
combination as N 100 ppm N / 930707 nitrate ISS
7 x 10-6 to 1.0 M 900002 inner 0.1 M NaNO3 / 920706 930711 or
Plastic membrane
Nitrate (NO3-) 9307BNWP 1 0.1 to 14,000 ppm 0 to 40 °C 900200 / 900046 or 1000 ppm N / 920707 930710 /
half-cell
as N ISA outer 100 ppm N / 930707 nitrate ISS
ionplus sure-flow
Potassium (K+) 1 x 10-6 to 1.0 M
9719BNWP 1 plastic membrane 0 to 40 °C Included 900065 0.1 M KCl / 921906 931911
ionplus Design 0.04 to 39,000 ppm
combination
900002
Plastic membrane 1 x 10-6 to 1.0 M
Potassium (K+) 9319BN 2 0 to 40 °C 900200 inner / dilute 0.1 M KCl / 921906 931911
half-cell 0.04 to 39,000 ppm
ISA outer
1 x 10-7 to 1.0 M
900062 for 940011
Silver/Sulfide ionplus 0.01 to 107,900 ppm
Ag+/S2- for Ag+
(Ag+/S2-) 9616BNWP 1 sure-flow solid as Ag+ 0 to 80 °C Included Consult user guide
ionplus Design 900067 for Ag+ 941609
state combination 0.003 to 32,100 ppm
900061 for S2- for S2-
as S2-
1 x 10-7 to 1.0 M
940011
0.01 to 107,900 ppm 900002 inner
Silver/Sulfide 9416BN 2 Solid state for Ag+
as Ag+ 0 to 80 °C 900200 / 900003 Consult user guide
(Ag+/S2-) 9416SC 3 half-cell 941609
0.003 to 32,100 ppm outer
for S2-
as S2-
10 ppm Na+ / 941105
100 ppm Na+ / 941107 841111
900010 or
ROSS® sure-flow 1 x 10-6 M to saturated 1000 ppm Na+ / 841108 841113 /
Sodium (Na+) 8611BNWP 1 0 to 100 °C Included 900012 for
combination 0.02 ppm to saturated KA standard kit, 1 M NaCl reconditioning
low level Na+
with ISA / 650700 solution
0.1 M NaCl / 941706
10 ppm Na+ / 941105
100 ppm Na+ / 941107 84111111
900010 or
1 x 10-6 M to saturated 800300 or 1000 ppm Na+ / 841108 84111313 /
Sodium (Na+) 8411BN 2 ROSS half-cell 0 to 100 °C 900012 for
0.02 ppm to saturated 800500U KA standard kit, 1 M NaCl ditioning
reconditioning
low level Na+
with ISA / 650700 on
solution
0.1 M NaCl / 941706
1 x 10-6 M to saturated
Sodium (Na+) 9811BN 2 Micro combination 0 to 80 °C Included 900004 0.1 M NaCl / 941706 11
841111
0.02 ppm to saturated
Plastic membrane 900002 inner / 0.5 M Hyamine titrant / 03 /
654203
Surfactant 9342BN 2 Endpoint indicator 0 to 40 °C 900200
half-cell 810007 outer 654201 samplee additive
Thiocyanate Solid state 5 x 10-6 to 1.0 M 900002 inner /
9458BN 2 0 to 50 °C 900200 Consult user guide 11
940011
(SCN-) half-cell 0.29 to 58,100 ppm 900003 outer

Key Information
1 2 3 1 BNC Waterproof Connector 2 BNC Connector
3 Screw Cap Connector, requires separate cable
8 Module only, requires separate 93 series electrode handle (9300BNWP or 9300SC)
All cap diameters are 16 mm at bottom of cap
BNC BNC Connector Screw Cap All cable lengths are 1 meter

Thermo Scientific Orion Laboratory Products Catalog | Sourcebook 91

 Thermo Scientific Orion Fluoride Ion Selective Electrodes
The standard in fluoride ion analysis – EPA compliant
Ion Selective Electrodes

Approved ASTM Method for Fluoride Convenient Half cell reference design
in Drinking Water and Wastewater combination provides flexibility
with reference
Analyze free fluoride ions in aqueous
solutions reliably at low limits of detection.
Measurements are quick, simple, accurate
and economical. BEST BEST

Thermo Scientific Orion fluoride electrodes

feature high quality lanthanum fluoride BEST

pellet sensors. Choose from combination

electrodes or half cell designs. The fluoride
half cell electrode requires a separate half
cell reference electrode.
Other Applications for
Fluoride Electrodes
• Phosphate: Gran plot titration can
determine phosphate in applications
from animal feed to cleaning solutions
to food and beverage
• Ammonium Bifluoride: Multiple
known addition (MKA) titration method Combination
C
Com bii aati
bin tiion H lf cell
Hal
Half ccells
ellss –
ell
determines levels without need of fluoride
fluori
fluo de
ori de ISE
IS
SE Fluoride
Fl
Fluoriide
d ISE andd Sure-Flow
S ™
reference
removing interfering heavy metal ions with Sure
Sure-FlowFlow
reference • Fluoride surface can be easily cleaned using
• Aluminum: Gran plot titration can toothpaste and a lint-free wipe
determine micro and semi micro levels • Fluoride surface • Use with the 900100 single junction or
can be easily 900200 double junction reference electrodes
of aluminum cleaned using
toothpaste and a
Accessories and Solutions lint-free wipe

A full line of supporting accessories is • Built-in Sure-Flow

reference provides
offered to meet your measurement needs. fast and
A variety of calibration standards are stable readings

available. Low level standards have the

9409BN
added convenience of being pre-made Cat. No. 9609BNWP 9409SC 900100
with total ionic strength adjustor (TISAB) Measurement Range
1 x 10-6 M to saturated 1 x 10-6 M to saturated
–
0.02 ppm to saturated 0.02 ppm to saturated
and requiring that TISAB be added only to
Temp. Range 0 to 80 °C 0 to 80 °C 0 to 100 °C
your samples. TISAB II requires a 50:50
BNC
dilution with the sample and is available in Connector Type BNC Waterproof
Screw Cap
Pin Tip
gallon bottles. TISAB III is a concentrate
and requires a 1:10 dilution.

Cat. No. Recommended Accessories

940906 0.1 M NaF standard, 475 mL
940907 100 ppm fluoride standard, 475 mL
040906 1 ppm fluoride standard with TISAB II, 475 mL
040907 2 ppm fluoride standard with TISAB II, 475 mL
040908 10 ppm fluoride standard with TISAB II, 475 mL
940909 TISAB II, 1 gallon
940999 TISAB II, 4 x 1 gallon
940911 TISAB III concentrate, 475 mL
Optimum results A electrode fill solution for
900061
9609BNWP, 5 x 60 mL
Fill solution for 900100 used with
900001
9409BN/9409SC, 5 x 60 mL BNC Waterproof BNC Screw Cap Pin Tip

92 Sourcebook | Thermo Scientific Orion Laboratory Products Catalog

Thermo Scientific Orion Ammonia Ion Selective Electrodes
Compliant with EPA testing methods

Ion Selective Electrodes

EPA Approved ASTM D1426 Method High Standard
for Ammonia in Wastewater performance ammonia
ammonia electrode
Measurements are quick, simple, accurate
electrode
and economical.
Thermo Scientific Orion ammonia
BETTER
electrodes feature time-tested membrane
technology. Choose from high performance
and standard designs. BEST

The high performance ammonia electrode

offers linear response down to the lower
limits of detection. The electrode can
detect down to 0.01 ppm. The high
performance ammonia electrode can
achieve response times of 1 minute in
samples of 1 ppm or higher. It is rugged
and meets the rigorous requirements
of waste water and drinking water
operators. Supplied with pack of 20 loose
membranes, 1 pre-assembled outer body
and 2 bottles of fill solution.
PPre-assembled
Pre
re-as
-assem
-as
assem
semble
bledd
ble Pro
Provides
vides
vid
ides
Other Applications for bodyy and
bod and reliable results
Ammonia Electrodes membrane at mid to high
simplifies use and ammonia levels
• Ammonium or Nitrogen: Measure achieves optimum
ammonium after conversion to performance
ammonia or nitrogen after Kjeldahl
digestion of sample
Accessories and Solutions
A full line of supporting accessories is
offered to meet your measurement needs.
Cat. No. 9512HPBNWP 9512BNWP
5 x 10-7 to 1.0 M 5 x 10-7 to 1.0 M
Measurement Range
0.01 to 17,000 ppm 0.01 to 17,000 ppm
Temp. Range 0 to 50 °C 0 to 50 °C
Connector Type BNC Waterproof BNC Waterproof

HP Electrode Standard Electrode

Cat. No. Recommended Accessories Cat. No. Recommended Accessories
Loose membranes for HP Loose membranes for standard
951214 951204
electrodes, box of 20 electrodes, box of 20
Pre-assembled outer body and Bonded membranes for standard
951205
951215 membrane cap assembly for HP electrodes, pack of 3
electrodes, 3 pack pH adjusting ISA, for samples
951210
pH adjusting ISA, for samples with no metallic ions, 475 mL
951210
with no metallic ions, 475 mL pH adjusting ISA, for samples
951211
pH adjusting ISA, for samples containing metallic ions, 475 mL
951211
containing metallic ions, 475 mL Ammonia electrode storage
951213
Ammonia electrode storage solution, 475 mL
951213
solution, 475 mL Standard ammonia electrode
951202
HP ammonia electrode filling filling solution, 60 mL
951209
solution, 60 mL 951006 0.1 M NH4Cl standard, 475 mL
951006 0.1 M NH4Cl standard, 475 mL 1000 ppm ammonia as nitrogen
951007
1000 ppm ammonia as nitrogen standard, 475 mL
951007
standard, 475 mL BNC Waterproof

Thermo Scientific Orion Laboratory Products Catalog | Sourcebook 93

 Thermo Scientific Orion Nitrate Ion Selective Electrodes
Compliant with EPA testing methods
Ion Selective Electrodes

The Easy Way to Measure Nitrate Convenient Half cell reference design
Levels in Drinking Water, Wastewater combination provides flexibility
electrode with
and Soils
replaceable module
Analyze free nitrate ions in aqueous
solutions reliably at low limits of detection.
Measurements are quick, simple, accurate BEST BEST

and economical.
Choose from combination electrodes BEST

or half cell designs. The nitrate half cell

electrode requires a separate half cell
reference electrode.
Other Applications for
Nitrate Electrodes
• Nitric Acid: Multiple known addition
(MKA) titration method determines levels
without need of removing interfering
heavy metal ions.
Accessories and Solutions
A full line of supporting accessories is
offered to meet your measurement Combination
C
Com bii aati
bin tiion nitrat
nit
nitrate
itrat
atte H lf cell
Hal
Half ccells
ellss – N
ell Nitrate
itrate
itr
it at IS
ate ISE
SE
needs. A variety of calibration standards ISE
SE with
wiith Sur
S
Sure-
ure-
e andd Su
S Flow™ reference
Sure-Flow
re Flo
re-
Flow™ reference
are available. Replacement modules are • Reference junction is reliable and
available individually or in convenient • Sure-Flow easy to maintain
reference provides
three packs. stable readings
• Replaceable module provides convenience

and is easy
to clean
• Convenient
with small
sample sizes

Cat. No. 9707BNWP 9307BNWP 900200

7 x 10-6 to 1.0 M 7 x 10-6 to 1.0 M
Measurement Range –
0.1 to 14,000 ppm as N 0.1 to 14,000 ppm as N
Temp. Range 0 to 40 °C 0 to 40 °C 0 to 100 °C
Connector Type BNC Waterproof BNC Waterproof Pin Tip

Cat. No. Recommended Accessories

900046 Optimum results F electrode fill solution, 5 x 60 mL.
For 9707BNWP and outer fill solution for 900200
900002 Inner chamber fill solution for 900200, 5 x 60 mL
920706 0.1 M NaNO3 standard solution, 475 mL
920707 1000 ppm nitrate as nitrogen standard, 475 mL
930707 100 ppm nitrate as nitrogen standard, 475 mL
930711 Nitrate ionic strength adjustor (ISA), 475 mL
930710 Nitrate interference suppressor solution (NISS), 475 mL
970701 Replacement module for 9707BNWP (1 each)
930701 Replacement module for 9307BNWP (pack of 3)
930702 Replacement module for 9307BNWP (1 each) BNC Waterproof Pin Tip

94 Sourcebook | Thermo Scientific Orion Laboratory Products Catalog

Thermo Scientific Orion Chloride Ion Selective Electrodes
Compliant with EPA testing methods

Ion Selective Electrodes

Approved ASTM Method for Chloride Convenient Half cell reference design
in Wastewater combination provides flexibility
with Sure-Flow
Easily and reliably analyze free chloride
reference
ions in aqueous solutions. Provides quick,
accurate and economical measurements.
Rugged epoxy body design ensures BEST BEST

durability of electrode.
Other Applications for BEST

Chloride Electrodes
• Salt: Multiple known addition can
be used to determine salt levels in
food samples
• Hydrochloric Acid: First
derivative titration can determine
HCl concentrations
Accessories and Solutions
Thermo Scientific offers a full line
of accessories to enhance your
measurements. These include calibration
standards, two ionic strength adjustors Combination
Combin
Com bi ati
bin ation
at on
on Half
Hal
H alflf cell
ccells
elllss - Ch
ell Chlor
Chloride
lo ide
lor id IS
ISE
SE aand
nd dou
double ju
double junct
junction
nction
nct ion
– one to adjust background ionic chloride
chl
hlori
oriide ISE
SE Sure-Flow
Sure-F
Sur ee-FFlow
Flow re refer
reference
f enc
fer ence
strength (ISA) and another to minimize with Sure Flow®
Sure-Flow
reference • Double junction reference isolates inner
complexation interferences and adjust reference from sample
background ionic strength (CISA), and • Durable reference • Designed for precision measurements
choice of fill solutions depending on pellet which can
be polished to
sample composition. restore electrode
performance
• Sure-Flow
reference provides
easy maintenance
and optimum
performance
9417BN
Cat. No. 9617BNWP 9417SC 900200
5 x 10-5 to 1.0 M 5 x 10-5 to 1.0 M
Measurement Range –
1.8 to 35,000 ppm 1.8 to 35,000 ppm
Temp. Range 0 to 80 °C 0 to 80 °C 0 to 100 °C
BNC
Connector Type BNC Waterproof Pin Tip
Screw cap

Cat. No. Recommended Accessories

940011 Chloride ionic strength adjustor (ISA), 475 mL
941709 Chloride CISA reagent pack, 2 x 2 L
941706 0.1 M NaCl standard, 475 mL
941708 1000 ppm chloride standard, 475 mL
941707 100 ppm chloride standard, 475 mL
900062 Optimum results B fill solution for 9617BNWP, 5 x 60 mL
900017 Chloride electrode fill solution, 5 x 60 mL,
for samples more concentrated than 10-2 M
900003 Outer chamber fill solution for 900200, 5 x 60 mL
900002 Inner chamber fill solution for 900200, 5 x 60 mL
948201 Polishing strips, pack of 24 BNC Waterproof BNC Screw Cap Pin Tip

Thermo Scientific Orion Laboratory Products Catalog | Sourcebook 95

 Thermo Scientific Orion ROSS® Sodium Ion Selective Electrodes
ROSS Fast Response and Stability
Ion Selective Electrodes

Comes with Complete Solution Kit Convenient Half cell reference design
Containing Standards, Reagents, combination provides flexibility with choice
ISA and More! with Sure-Flow of ROSS references
reference
Quick, accurate and economical
measurements of free sodium ions in
aqueous solutions. Chemical resistant BEST BEST

glass body.
Applications for Sodium Electrodes BEST SUPERIOR
TEMPERATURE
SUPERIOR
TEMPERATURE

The sodium electrode is commonly used to CONTROL CONTROL

measure samples such as food, beverages SUPERIOR

TEMPERATURE
and animal feed. CONTROL

Accessories and Solutions

Thermo Scientific provides you all
the accessories you need for sodium
measurement when you purchase a
ROSS sodium electrode. Each electrode
comes with electrode fill solution,
sodium ionic strength adjustor, 3 different
sodium standards, sodium electrode
reconditioning solution and sodium
electrode storage solution. Combination
C
Com bii aati
bin tiion Ros
R
Ross
o s H lf cell
Hal
Half ccells
ellss - Ch
ell C
Chloride
loride
lor ide
d IS
ISEE and
and dou
double
ble
Sodium
Sod ium
um
m IS ISE
SE w with
ith jjunction
juncti
titon Sur
S
Sure-Flow
ure-Flow
Fl reference and
Sure Flow® reference
Sure-Flow optimum performance

• Unique redox • Choice of ROSS reference systems:

ROSS reference ROSS Sure-Flow reference (800300) with
system provides fast easy to clean and reliable junction
response, better • ROSS Ultra® reference (800500U) with
stability and accuracy ROSS performance and extended life with
than conventional 2 year warranty
sodium electrodes
• Sure-Flow reference
prevents clogging
while giving fast,
stable readings
800300
Cat. No. 8611BNWP 8411BN 800500U
1 x 10-6 M to saturated 1 x 10-6 M to saturated
Measurement Range –
0.02 ppm to saturated 0.02 ppm to saturated
Temp. Range 0 to 100 °C 0 to 100 °C 0 to 100 °C
Connector Type BNC Waterproof BNC Pin Tip

Cat. No. Recommended Accessories

941706 0.1 M NaCl standard, 475 mL
841108 1000 ppm sodium standard, 475 mL
941107 100 ppm sodium standard, 475 mL
941105 10 ppm sodium standard, 475 mL
650700 Known addition kit – 3 x 475 mL of 1 M NaCl
standard with ISA and 1 x 475 mL ISA
841109 Know addition standard, 1000 ppm as Na+
with ISA, 475 mL
841111 Sodium ionic strength adjustor (ISA), 475 mL
841113 Sodium electrode reconditioning solution, 475 mL
841101 Sodium electrode storage solution, 475 mL
900010 Sodium electrode fill solution, 5 x 60 mL
900012 Sodium electrode fill solution for low sodium levels
(below 10-5 M or 0.2 ppm) BNC Waterproof BNC Pin Tip

96 Sourcebook | Thermo Scientific Orion Laboratory Products Catalog

ISE Calibration Standards, Ionic Strength
th
ions
Adjusters (ISA), Reagents and Fill Solutions

Ion Selective Electrodes

All ISE Standards are NIST traceable
Cat. No. Description
Ammonia, Standard and High Performance
951006 0.1 M NH4Cl Ammonia standard, 475 mL
951007 1000 ppm Ammonia as Nitrogen (N) standard, 475 mL
951207 100 ppm Ammonia as Nitrogen (N) standard, 475 mL
Ammonia Ionic Strength Adjuster (ISA) with pH-indicating
951211
blue dye, 475 mL
Ammonia low level Ionic Strength Adjuster (ISA) with
951210
pH-indicating blue dye, 475 mL
951213 Ammonia electrode storage solution, 475 mL Chlorine, Residual
951209 Ammonia high perform electrode fill solution, 60 mL 977007 100 ppm as Cl2 Residual Chlorine standard, 475 mL
951202 Ammonia standard electrode fill solution, 60 mL 977011 Residual Chlorine acid reagent, 475 mL
Ammonium 977010 Residual Chlorine iodide reagent, 5 x 50 mL
951007 1000 ppm Ammonium as Nitrogen (N) standard, 475 mL Cupric
900018-WA Ammonium electrode fill solution, 5 x 60 mL 942906 0.1 M Cu(NO3)2 Cupric standard, 475 mL
Bromide 940011 Cupric Ionic Strength Adjuster (ISA), 475 mL
943506 0.1 M NaBr Bromide standard, 475 mL Optimum results D fill solution for Cupric electrode,
900063
940011 Bromide Ionic Strength Adjuster (ISA), 475 mL 5 x 60 mL
Optimum results D fill solution for Bromide electrode, Cyanide
900063
5 x 60 mL 951011 Cyanide alkaline reagent, 10 N NaOH, 475 mL
Cadmium Optimum results B fill solution for Cyanide electrode,
900062
940011 Cadmium Ionic Strength Adjuster (ISA), 475 mL 5 x 60 mL
Optimum results A fill solution for Cadmium electrode, Fluoride
900061
5 x 60 mL 940906 0.1 M NaF Fluoride standard, 475 mL
Calcium 940907 100 ppm Fluoride standard, 475 mL
922006 0.1 M CaCl2 Calcium standard, 475 mL 10 ppm Fluoride standard premixed with TISAB II,
040908
923206 100 ppm as CaCO3 Calcium standard, 475 mL color coded blue, 475 mL
932011 Calcium Ionic Strength Adjuster (ISA), 475 mL 2 ppm Fluoride standard premixed with TISAB II,
040907
color coded red, 475 mL
Optimum results A fill solution for Calcium electrode,
900061 1 ppm Fluoride standard premixed with TISAB II,
5 x 60 mL 040906
color coded green, 475 mL
Carbon Dioxide Fluoride standard bulk pack – 4 x 475 mL each of 1 ppm
950206 0.1 M NaHCO3 Carbon Dioxide standard, 475 mL 940916 Fluoride standard premixed with TISAB II (040906) and 10
950207 1000 ppm as CaCO3 Carbon Dioxide standard, 475 mL ppm Fluoride standard premixed with TISAB II (040908)
950210 Carbon Dioxide Ionic Strength Adjuster (ISA), 475 mL 940909 TISAB II for Fluoride ISE, 1 gallon
950202 Carbon Dioxide electrode fill solution, 60 mL 940999 TISAB II for Fluoride ISE, 4 x 1 gallon
Chloride 940911 TISAB III (concentrated) for Fluoride ISE, 475 mL
941706 0.1 M NaCl Chloride standard, 475 mL Optimum results A fill solution for Fluoride electrode,
900061
5 x 60 mL
941708 1000 ppm Chloride standard, 475 mL
Fluoroborate
941707 100 ppm Chloride standard, 475 mL
930711 Fluoroborate Ionic Strength Adjuster (ISA), 475 mL
940011 Chloride Ionic Strength Adjuster (ISA), 475 mL
Iodide
Chloride Complexation Ionic Strength Adjuster (CISA)
941709 945306 0.1 M NaI Iodide standard, 475 mL
reagent pack, 2 x 1 L
Optimum results B fill solution for Chloride electrode, 940011 Iodide Ionic Strength Adjuster (ISA), 475 mL
900062
5 x 60 mL Optimum results D fill solution for Iodide electrode,
900063
900017 Chloride electrode fill solution, 5 x 60 mL 5 x 60 mL
Lead
948206 0.1 M Pb(ClO4)2 Lead standard, 475 mL
Optimum results B fill solution for Lead electrode,
900062
5 x 60 mL
Nitrate
920706 0.1 M NaNO3 Nitrate standard, 475 mL
920707 1000 ppm Nitrate as Nitrogen (N) standard, 475 mL
930707 100 ppm Nitrate as Nitrogen (N) standard, 475 mL
930711 Nitrate Ionic Strength Adjuster (ISA), 475 mL
930710 Nitrate Interference Suppressor Solution (NISS), 475 mL
Optimum results F fill solution for Nitrate electrode,
900046
5 x 60 mL

Thermo Scientific Orion Laboratory Products Catalog | Sourcebook 97

Ion Selective Electrodes

Nitrate Test Kit

Nitrate test kit for Ammonia ISE – 2 x 50 mL electrode fill
solution (951203), 2 x 475 mL alkaline reagent (951011),
475 mL 100 ppm Nitrate as Nitrogen (N) standard
700005
(930707), 475 mL 100 ppm Ammonia as Nitrogen (N)
standard (951207), 475 mL reducing reagent (700006)
and 2 pipets
700006 Nitrate test kit reducing reagent refill, 475 mL
951203 Nitrate test kit electrode fill solution, 50 mL
Nitrite
954606 0.1 M NaNO2 Nitrite standard, 475 mL Sulfate
934610 Nitrite interference suppressor solution, 475 mL 948207 0.1 M Na2SO4 sulfate standard for lead electrode, 475 mL
Optimum results F fill solution for Nitrite electrode, Sulfide
900046
5 x 60 mL 941609 Sulfide SAOB reagent pack, 4 x 475 mL
Nitrogen Oxide Optimum results A fill solution for Sulfide electrode
900061
954606 0.1 M NaNO2 Nitrogen Oxide standard, 475 mL (when sample temperatures vary), 5 x 60 mL
956410 Nitrogen Oxide acid buffer, 475 mL Optimum results B fill solution for Silver/Sulfide electrode,
900062
5 x 60 mL
954602 Nitrogen Oxide electrode fill solution, 50 mL
Surfactant
Perchlorate
654202 0.01 M SLS Surfactant standard, 1 x 60 mL
930711 Perchlorate Ionic Strength Adjuster (ISA), 475 mL
654201 0.05 M hyamine Surfactant titrant, 475 mL
Potassium
654205 Non-ionic Surfactant titrant, 475 mL
921906 0.1 M KCl Potassium standard, 475 mL
654203 Surfactant sample additive, tritonX-100, 475 mL
931911 Potassium Ionic Strength Adjuster (ISA), 475 mL
810007 Surfactant electrode fill solution, 5 x 60 mL
Optimum results E fill solution for Potassium electrode,
900065 Thiocyanate
5 x 60 mL
Silver 940011 Thiocyanate Ionic Strength Adjuster (ISA), 475 mL
940011 Silver Ionic Strength Adjuster (ISA), 475 mL Water Hardness
Optimum results B fill solution for Silver/Sulfide electrode, 922006 0.1 M CaCl2 Water Hardness standard, 475 mL
900062
5 x 60 mL 923206 100 ppm as CaCO3 Water Hardness standard, 475 mL
Optimum results C fill solution for Silver electrode
900067
(when sample temperatures vary), 5 x 60 mL
Sodium
Signifies a hazardous solution.
See terms and conditions for important shipping information
941706 0.1 M NaCl Sodium standard, 475 mL
at www.thermoscientific.com/water
841108 1000 ppm Sodium standard, 475 mL
941107 100 ppm Sodium standard, 475 mL
941105 10 ppm Sodium standard, 475 mL
841111 Sodium Ionic Strength Adjuster (ISA), 475 mL
841113 Sodium electrode reconditioning solution, 475 mL
841101 Sodium electrode storage solution, 475 mL
Sodium KAP analysis kit – 3 x 475 mL of 1 M NaCl with
650700
ISA and 475 mL of Sodium ISA (841111)
841109 Sodium KAP standard, 1000 ppm with ISA, 475 mL
900010 Sodium electrode fill solution, 5 x 60 mL
900012 Sodium electrode (low level) fill solution, 5 x 60 mL
900004 Sodium micro electrode fill solution, 5 x 60 mL

98 Sourcebook | Thermo Scientific Orion Laboratory Products Catalog

 Ion Selective Electrodes
ISE Accessories, Membranes and Modules
Cat. No. Description
948201 Polishing strips for solid state electrodes
Ammonia, High Performance (9512HPBNWP, 9512HP01)
951214 20 loose membranes
951215 3 pre-assembled bodies and membrane caps
Ammonia, Standard (9512BNWP, 951201)
951204 20 loose membranes
951205 3 bonded membranes
Carbon Dioxide (9502BNWP)
950204 4 membranes with o-rings
Nitrogen Oxide (9546BN)
954604 20 loose membranes
950015 Spare electrode parts kit
97 Series Plastic Membrane Calcium, Nitrate and Potassium Combination
Electrode Accessories
9700BNWP 97 series electrode body with waterproof BNC connection
Replacement module for calcium combination electrode
972001
(9720BNWP)
Replacement module for nitrate combination electrode
970701
(9707BNWP)
Replacement module for potassium combination electrode
971901
(9719BNWP)
93 Series Plastic Membrane Ammonium, Calcium, Chloride, Fluoroborate, Visit the WAI Online Library on
HF Resistant pH, Nitrate, Perchlorate, Potassium and Water Hardness Half-
Cell Electrode Accessories www.thermoscientific.com/water
9300BNWP 93 series electrode body with waterproof BNC connection for the most up-to-date
930000 93 series electrode body with U.S. standard connection MSDS and Certificate of Analysis
93 series electrode body with screw cap, separate files for Orion solutions.
9300SC
cable required
900100 Single junction reference electrode with pin tip connection
900200 Double junction reference electrode with pin tip connection
931801 Replacement module for ammonium half-cell electrode
Replacement module for calcium half-cell electrode
932001
(9320BN)
931701 Replacement module for chloride half-cell electrode
Replacement module for fluoroborate half-cell electrode
930501
(9305BN)
Replacement module for nitrate half-cell electrode
930702
(9307BNWP)
Replacement modules (3) for nitrate half-cell electrode
930701
(9307BNWP)
938101 Replacement module for perchlorate half-cell electrode
930101 Replacement module for HF-resistant pH half-cell electrode
Replacement module for potassium half-cell electrode
931901
(9319BN)
Replacement module for water hardness half-cell electrode
933201
(9332BNWP)

Thermo Scientific Orion Laboratory Products Catalog | Sourcebook 99