Scribd
Upload
160 views2 pages

Network-Integrated Smoke Detector

This document provides information about the Smoke Detector-SK00 from AKCP. It can be used with AKCP's sensorProbe and securityProbe product lines. The smoke detector has an on/off alarm signal for smoke detection, LED status indicator, and low profile design for ceiling mounting. It can connect to up to two detectors per sensorProbe2 and eight per sensorProbe8/securityProbe. The smoke detector also has technical specifications including dry contact output, detector type, power source options, current draw, alarm volume and other details.

Uploaded by

gimbar Mail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
160 views2 pages

Network-Integrated Smoke Detector

This document provides information about the Smoke Detector-SK00 from AKCP. It can be used with AKCP's sensorProbe and securityProbe product lines. The smoke detector has an on/off alarm signal for smoke detection, LED status indicator, and low profile design for ceiling mounting. It can connect to up to two detectors per sensorProbe2 and eight per sensorProbe8/securityProbe. The smoke detector also has technical specifications including dry contact output, detector type, power source options, current draw, alarm volume and other details.

Uploaded by

gimbar Mail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Sensor Control...

Access Control...

Smoke Detector - SK00

Smoke Detector
Monitoring for developing smoke is an essential
aspect in the security and safety of any facility. AKCP
has designed a smoke sensor specifically for use with
its sensorProbe and securityProbe product line.

These smoke detectors are easy to install and


configure and can be used in conjunction with all
other of AKCP’s alerting features. As with other AKCP
sensors, this device has it’s own SNMP OID for
monitoring across a network, and integration with
third party Network Management Systems.

Smoke Detector - SK00


Sensor Control...
Access Control...

Smoke Detector’s Main Features


• Accurate, cost effective Smoke Detector dry contacts of a X20 or X60 unit.
• On/Off alarm signal of Smoke Detected • With 9V battery as backup the sensor /
• LED indicates the status of Smoke Detector securityProbe will still work as a smoke
• Low profile design for ceiling mounting for detector on its own.
maximum smoke detection.
• Sensor type - open/closed contact switch
• Up to 2 Smoke Detector Sensors per
sensorProbe2, and 8 per sensorProbe8 /
securityProbe
• Includes disconnect alarm that checks that
the sensor is securely plugged into the
sensor/securityProbe
• The smoke detector can also be attached to

Technical Specifications
Dry Contact Output : 0.045mA
Detector Type : Photoelectric Chamber, detects particles of smoke in the chamber
Power Source : 9VDC
Suitable for installation to BS 5839 pt 6 Grade F
Powered by sensor/securityProbe unit and/or 9V Battery
Standby Current : 15mAmp max
Alarm Current : 30mAmp max
Loud piercing 85db alarm at 3m
Ambient Humidity : 10% - 90%
Sensitivity to Smoke : 3% - 6% Obs/m
Extension : 30 meters/100 feet using standard CAT5E LAN cable
Battery lifetime:
Full function test button
Zinc Carbon battery: approx. 1 year
Alarm auto-reset
Alkaline Energizer: approx. 4 years
Insect resistant chamber
Lithium battery: approx. 10 years
Missing battery lockout

Smoke Detector - SK00

You might also like