Scribd
Upload
125 views1 page

Project: Mabini Pier (Conveyor Support) Location: Mabini, Batangas Owner

This document provides the structural design criteria for a conveyor support project at Mabini Pier in Batangas, Philippines. It specifies the loads, materials, pile capacity, seismic design parameters, applicable codes and references, and approved analysis and design software to be used. The loads include dead loads from self weight of steel and concrete, the conveyor system, and stored grain, as well as a live load assumption for maintenance. Concrete, reinforcement, and structural steel strengths are specified. Seismic design will follow the National Structural Code of the Philippines.

Uploaded by

jologscresencia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
125 views1 page

Project: Mabini Pier (Conveyor Support) Location: Mabini, Batangas Owner

This document provides the structural design criteria for a conveyor support project at Mabini Pier in Batangas, Philippines. It specifies the loads, materials, pile capacity, seismic design parameters, applicable codes and references, and approved analysis and design software to be used. The loads include dead loads from self weight of steel and concrete, the conveyor system, and stored grain, as well as a live load assumption for maintenance. Concrete, reinforcement, and structural steel strengths are specified. Seismic design will follow the National Structural Code of the Philippines.

Uploaded by

jologscresencia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Project: Mabini Pier (Conveyor Support)

Location: Mabini, Batangas


Owner:

STRUCTURAL DESIGN CRITERIA:

1. Loads:

a. Dead load
Self weight (steel) = 77 kN/m3
Self weight (concrete) = 23.6 kN/m3
Conveyor = 0.4 T/m
Grain = 7.50 kN/m3

b. Live load
Periodic Maintenance Activity = 0.75 kPa (Assumed)

2. Materials

a. Concrete:
Compressive strength, fc’ = 28 MPa

b. Reinforcement:
Tensile strength, fy = 275 MPa

c. Structural Steel
Yield strength, fy = 248 MPa

3. Pile
Allowable Capacity = 830 kN/pile (assumed)

4. Seismic

(Minimum requirements shall be as per National Structural Code of the Philippines,


NSCP Volume 1)

V = 2.5 Ca I W /R

Where V = Base Shear


Ca = Seismic Coefficient (0.4Na)
Na = Near-source factor (1.0)
R = Response modification factor (8.5)
W = Total Dead Weight

5. Codes and References

 National Structural Code of the Philippines, Volume 1


 ASEP Steel Handbook
 ASEP Earthquake Design Manual, Volume 1
 Foundation Analysis and Design (J. E. Bowles)

6. Analysis and Design Software

 STAAD Pro 2004

You might also like