LPKF Drilling, Milling and Routing Tools

Circuit Board Plotters

Developed Specifically for LPKF Circuit Board Plotters

Laser Circuit Structuring

Through-Hole Plating
Multilayer
1 2 3 4 5 6 7

SMT/Finishing
LPKF’s commitment to the highest-quality The tools are divided into two main groups:
components extends to every piece of tooling. Surface machining tools with 36 mm (1.42”) total
The drill and router bits developed specifically for length for surface work (cutter and end mills) and
LPKF are premium carbide tools. They ensure long penetrating tools with 38 mm (1.5”) total length
life, precise cuts and clean milling edges. for working through the base material (spiral drills,

LDS Prototyping
contour router and end mills).
Ordering info: See front sleeve.

Micro Cutter 1

Conical tools Universal Cutter 2

TechInfo

Surface machining tools

(l = 36 mm/1.42”) Cylindrical tools End Mill (RF) 3

Tools (1/8” shaft) End Mill 4

Penetrating tools End Mill (long) 5

(l = 38 mm/1.50”)
Index

Contour Router 6

Spiral Drills 7

Drilling, Milling and Routing Tools 23

Micro Cutter/Fine-Line Milling Tool 1/8”
Conical custom-designed tool with orange distance ring.

1 Part no. Length, milling width Application

115836 36 mm, 0.10 – 0.15 mm (4 – 6 mil) For fine isolation tracks on 18 µm
thick Cu.
0.1–0.15 mm
(4–6 mil) copper layer
∅

base material

Universal Cutter 1/8”

Conical custom-designed tool with orange distance ring.

2 Part no. Length, milling width Application

115835 36 mm, 0.2 – 0.5 mm (8 – 20 mil) For milling different isolation track
widths in any copper-plated base
0.2–0.5 mm material.
(8–20 mil)
∅

base material

End Mill (RF) 1/8’’

Cylindrical custom-designed tool with blue distance ring.

3 Part no. Length, milling width Application

115832 36 mm, d = 0.15 mm (6 mil) Finest isolation tracks in RF
115833 36 mm, d = 0.25 mm (10 mil) applications.
0.15–0.4 mm 115834 36 mm, d = 0.40 mm (16 mil)
(6–16 mil)
∅

End Mill 1/8’’

Cylindrical custom-designed tool with violet distance ring.

4 Part no. Length, milling width Application

115839 36 mm, d = 0.80 mm (31 mil) For wider isolation tracks, rub-out
115840 36 mm, d = 1.00 mm (39 mil) areas and engraving aluminum front
129100* 36 mm, d = 2.00 mm (79 mil) panels.
isolation engraving
0.8–3.0 mm 0.8–3.0 mm 129101* 36 mm, d = 3.00 mm (118 mil)
(31–118 mil) (31–118 mil)
∅ ∅

aluminum

* Shaft 25 mm (984 mil)

24 Drilling, Milling and Routing Tools

End Mill long 1/8’’

Circuit Board Plotters

Cylindrical custom-designed tool with light green distance ring.

5 Part no. Length, milling width Application

115837 38 mm, d = 1.00 mm (39 mil) For cutting aluminum and routing
129102* 38 mm, d = 2.00 mm (79 mil) soft base materials for RF and
1–2 mm 1–2 mm microwave applications.
(39–79 mil) (39–79 mil)

Laser Circuit Structuring

∅ ∅

dieletric
aluminum
material

* Shaft 25 mm (984 mil)

Contour router 1/8”

Through-Hole Plating
Cylindrical custom-designed tool with yellow distance ring.

6 Part no. Length, milling width Application

115844 38 mm, d = 1.00 mm (39 mil) For milling inner and outer contours
129099* 38 mm, d = 2.00 mm (79 mil) and holes > 2.4 mm (> 94 mil).
routing
1–2 mm
(39–79 mil)
∅

Multilayer
* Shaft 25 mm (984 mil)

Spiral Drill 1/8”

Cylindrical tool with green distance ring.

SMT/Finishing
7 Part no. Length, milling width Application
115846 38 mm, d = 0.20 mm (8 mil) For drill holes < 2.4 mm (< 94 mil).
115847 38 mm, d = 0.30 mm (12 mil)
115848 38 mm, d = 0.40 mm (16 mil)
115849 38 mm, d = 0.50 mm (20 mil)
115850 38 mm, d = 0.60 mm (24 mil)

LDS Prototyping
115851 38 mm, d = 0.70 mm (28 mil)
115852 38 mm, d = 0.80 mm (31 mil)
115853 38 mm, d = 0.85 mm (33 mil)
115854 38 mm, d = 0.90 mm (35 mil)
115855 38 mm, d = 1.00 mm (39 mil)
115856 38 mm, d = 1.10 mm (43 mil)
115857 38 mm, d = 1.20 mm (47 mil)
115858 38 mm, d = 1.30 mm (51 mil)
115859 38 mm, d = 1.40 mm (55 mil)
TechInfo

115860 38 mm, d = 1.50 mm (59 mil)

115861 38 mm, d = 1.60 mm (63 mil)
115862 38 mm, d = 1.70 mm (67 mil)
115863 38 mm, d = 1.80 mm (71 mil)
115864 38 mm, d = 1.90 mm (75 mil)
115865 38 mm, d = 2.00 mm (79 mil)
min. 0.2 mm max. 3.0 mm 115866 38 mm, d = 2.10 mm (83 mil)
(8 mil) (118 mil)
115867 38 mm, d = 2.20 mm (87 mil)
Index

∅ ∅
115868 38 mm, d = 2.30 mm (91 mil)
115869 38 mm, d = 2.40 mm (94 mil)
115870 38 mm, d = 2.95 mm (116 mil)
115871 38 mm, d = 3.00 mm (118 mil)

Drilling, Milling and Routing Tools 25

Tool set with 1/8” shaft and distance rings
For all LPKF ProtoMat models. Includes tools with pressed-on distance rings.

Part no. Contents

129103 10x Universal cutter 1/8”, 36 mm (1.4”), 0.2 – 0.5 mm (8 – 20 mil)
2x Micro cutter 1/8“, 36 mm (1.4“), 0.10 – 0.15 mm (4 – 6 mil)
1x End mill 1/8”, 36 mm (1.4”), d = 0.8 mm (31 mil)
2x End mill 1/8”, 36 mm (1.4”), d = 1.00 mm (39 mil)
2x End mill 1/8”, 36 mm (1.4”), d = 2.00 (79 mil)
1x End mill long 1/8”, 38 mm (1.5”), d = 1.00 mm (39 mil)
1x End mill long 1/8”, 38 mm (1.5”), d = 2.00 (79 mil)
2x Contour router 1/8”, 38 mm (1.5”), d = 1.00 (39 mil)
2x Contour router 1/8”, 38 mm (1.5”), d = 2.00 (79 mil)
2x Spiral drill 1/8”, 38 mm (1.5”), d = 0.40 (16 mil)
2x Spiral drill 1/8”, 38 mm (1.5”), d = 0.50 (20 mil)
2x Spiral drill 1/8”, 38 mm (1,5”), d = 0.60 (24 mil)
2x Spiral drill 1/8”, 38 mm (1.5”), d = 0.70 (28 mil)
2x Spiral drill 1/8”, 38 mm (1.5”), d = 0.80 (31 mil)
2x Spiral drill 1/8”, 38 mm (1.5”), d = 0.90 (35 mil)
2x Spiral drill 1/8”, 38 mm (1.5”), d = 1.00 (39 mil)
1x Spiral drill 1/8”, 38 mm (1.5”), d = 1.20 (47 mil)
1x Spiral drill 1/8”, 38 mm (1.5”), d = 1.40 (55 mil)
2x Spiral drill 1/8”, 38 mm (1.5”), d = 1.50 (59 mil)
1x Spiral drill 1/8”, 38 mm (1.5”), d = 1.60 (63 mil)
1x Spiral drill 1/8”, 38 mm (1.5”), d = 1.80 (71 mil)
2x Spiral drill 1/8”, 38 mm (1.5”), d = 2.00 (79 mil)
2x Spiral drill 1/8”, 38 mm (1.5”), d = 3.00 (118 mil)

RF and microwave tool set with distance rings

Part no. Contents
116394 Tools with distance rings:
5x End mill (RF) 1/8”, 36 mm, d = 0.25 mm (10 mil)
3x End mill (RF) 1/8”, 36 mm, d = 0.40 mm (16 mil)
3x End mill (RF) 1/8”, 36 mm, d = 0.15 mm (6 mil)
5x End mill 1/8”, 36 mm, d = 1.00 mm (39 mil)
2x End mill 1/8”, 36 mm, d = 2.00 mm (79 mil)
2x End mill 1/8”, 38 mm, d = 2.00 mm (79 mil)

Please note:
LPKF recommends using only original LPKF tools and assumes no warranty for machine or secondary failures resulting
from the use of non-LPKF tools. All specifications are subject to technical modifications.

26 Drilling, Milling and Routing Tools