DATASHEET - DILM12-10(230V50HZ,240V60HZ)

Contactor, 3p+1N/O, 5.5kW/400V/AC3

Part no.  DILM12-10(230V50HZ,240V60HZ)

Catalog No.  276830
Eaton Catalog No.  XTCE012B10F
EL-Nummer 0004130321
(Norway) 
Delivery program
Product range     Contactors

Application     Contactors for Motors

Subrange     Contactors up to 170 A, 3 pole

Utilization category     AC-1: Non-inductive or slightly inductive loads, resistance furnaces

NAC-3: Normal AC induction motors: starting, switch off during running
AC-4: Normal AC induction motors: starting, plugging, reversing, inching

     

Notes     Also suitable for motors with efficiency class IE3.

IE3-ready devices are identified by the logo on their packaging.

Connection technique     Screw terminals

Number of poles     3 pole

Rated operational current      

AC-3      

380 V 400 V Ie A 12

AC-1      

Conventional free air thermal current, 3 pole, 50 - 60 Hz      

Open      

at 40 °C Ith =Ie A 22

enclosed Ith A 18

Conventional free air thermal current, 1 pole      

open Ith A 50

enclosed Ith A 45

Max. rating for three-phase motors, 50 - 60 Hz      

AC-3      

220 V 230 V P kW 3.5

380 V 400 V P kW 5.5

660 V 690 V P kW 6.5

AC-4      

220 V 230 V P kW 2

380 V 400 V P kW 3

660 V 690 V P kW 4.4

Contacts      

N/O = Normally open     1 N/O

Contact sequence    

Instructions     Contacts to EN 50 012.

Can be combined with auxiliary contact     DILM32-XHI..

DILA-XHI(V)..

Actuating voltage     230 V 50 Hz, 240 V 60 Hz

Voltage AC/DC     AC operation

Connection to SmartWire-DT     no

10/25/2018 Eaton 276830 ED2018 V49.0 EN 1 / 14

Technical data
General
Standards     IEC/EN 60947, VDE 0660, UL, CSA

Lifespan, mechanical      

AC operated Operations x 10
6 10

Operating frequency, mechanical      

AC operated Operations/h   9000

Climatic proofing     Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature      

Open   °C -25 - +60

Enclosed   °C - 25 - 40

Storage   °C - 40 - 80

Mounting position    

Mechanical shock resistance (IEC/EN 60068-2-27)      

Half-sinusoidal shock, 10 ms      

Main contacts      

N/O contact   g 10

Auxiliary contacts      

N/O contact   g 7

N/C contact   g 5

Mechanical shock resistance (IEC/EN 60068-2-27) when tabletop-mounted      

Half-sinusoidal shock, 10 ms      

Main contacts      

N/O contact   g 5.7

Auxiliary contacts      

N/O contact   g 3.4

N/C contact   g 3.4

Degree of Protection     IP20

Protection against direct contact when actuated from front (EN 50274)     Finger and back-of-hand proof

Weight      

AC operated   kg 0.24

Screw connector terminals      

Terminal capacity main cable      

Solid   mm
2 1 x (0.75 - 4)
2 x (0.75 - 2.5)

Flexible with ferrule   mm

2 1 x (0.75 - 2.5)
2 x (0.75 - 2,5)

Solid or stranded   AWG single 18 - 10, double 18 - 14

Stripping length   mm 10

Terminal screw     M3.5

Tightening torque   Nm 1.2

Tool      

Pozidriv screwdriver   Size 2

Standard screwdriver   mm 0.8 x 5.5

1x6

Terminal capacity control circuit cables      

Solid   mm
2 1 x (0.75 - 4)
2 x (0.75 - 2.5)

Flexible with ferrule   mm

2 1 x (0.75 - 2.5)
2 x (0.75 - 2.5)

Solid or stranded   AWG 18 - 14

Stripping length   mm 10

10/25/2018 Eaton 276830 ED2018 V49.0 EN 2 / 14

 Terminal screw     M3.5

Tightening torque   Nm 1.2

Tool      

Pozidriv screwdriver   Size 2

Standard screwdriver   mm 0.8 x 5.5

1x6
Main conducting paths
Rated impulse withstand voltage Uimp V AC 8000

Overvoltage category/pollution degree     III/3

Rated insulation voltage Ui V AC 690

Rated operational voltage Ue V AC 690

Safe isolation to EN 61140      

between coil and contacts   V AC 400

between the contacts   V AC 400

Making capacity (p.f. to IEC/EN 60947)      

  Up to 690 V A 144

Breaking capacity      

220 V 230 V   A 120

380 V 400 V   A 120

500 V   A 100

660 V 690 V   A 70

Short-circuit rating      

Short-circuit protection maximum fuse      

Type “2” coordination      

400 V gG/gL 500 V A 20

690 V gG/gL 690 V A 20

Type “1” coordination      

400 V gG/gL 500 V A 35

690 V gG/gL 690 V A 25

AC
AC-1      

Rated operational current      

Conventional free air thermal current, 3 pole, 50 - 60 Hz      

Open      

at 40 °C Ith =Ie A 22

at 50 °C Ith =Ie A 21

at 55 °C Ith =Ie A 21

at 60 °C Ith =Ie A 20

enclosed Ith A 18

Conventional free air thermal current, 1 pole      

open Ith A 50

enclosed Ith A 45

AC-3      

Rated operational current      

Open, 3-pole: 50 – 60 Hz      

220 V 230 V Ie A 12

240 V Ie A 12

380 V 400 V Ie A 12

415 V Ie A 12

440V Ie A 12

500 V Ie A 10

660 V 690 V Ie A 7

380 V 400 V Ie A 12

Motor rating P kWh  

220 V 230 V P kW 3.5

10/25/2018 Eaton 276830 ED2018 V49.0 EN 3 / 14

 240V P kW 4

380 V 400 V P kW 5.5

415 V P kW 7

440 V P kW 7.5

500 V P kW 7

660 V 690 V P kW 6.5

AC-4      

Open, 3-pole: 50 – 60 Hz      

220 V 230 V Ie A 7

240 V Ie A 7

380 V 400 V Ie A 7

415 V Ie A 7

440 V Ie A 7

500 V Ie A 6

660 V 690 V Ie A 5

Motor rating P kWh  

220 V 230 V P kW 2

240 V P kW 2.2

380 V 400 V P kW 3

415 V P kW 3.4

440 V P kW 3.6

500 V P kW 3.5

660 V 690 V P kW 4.4

DC
Rated operational current, open      

DC-1      

60 V Ie A 20

110 V Ie A 20

220 V Ie A 15

Current heat loss

3 pole, at Ith (60°)   W 2.5

Current heat loss at Ie to AC-3/400 V   W 0.9

Impedance per pole   mΩ 2.5

Magnet systems
Voltage tolerance      

AC operated Pick-up x Uc 0.8 - 1.1

Drop-out voltage AC operated Drop-out x Uc 0.3 - 0.6

Power consumption of the coil in a cold state and 1.0 x US      

50 Hz Pick-up VA 24

50 Hz Sealing VA 3.4

50 Hz Sealing W 1.4

60 Hz Pick-up VA 30

60 Hz Sealing VA 4.4

60 Hz Sealing W 1.4

Duty factor   % DF 100

Changeover time at 100 % US (recommended value)      

Main contacts      

AC operated      

Closing delay   ms 15 - 21

Opening delay   ms 9 - 18

Arcing time   ms 10
Electromagnetic compatibility (EMC)
Emitted interference     to EN 60947-1

Interference immunity     to EN 60947-1

10/25/2018 Eaton 276830 ED2018 V49.0 EN 4 / 14

Rating data for approved types
Switching capacity      

Maximum motor rating      

Three-phase      

200 V   HP 3
208 V

230 V   HP 3
240 V

460 V   HP 10
480 V

575 V   HP 10
600 V

Single-phase      

115 V   HP 1
120 V

230 V   HP 2
240 V

General use   A 20

Auxiliary contacts      

Pilot Duty      

AC operated     A600

DC operated     P300

General Use      

AC   V 600

AC   A 10

DC   V 250

DC   A 1

Short Circuit Current Rating   SCCR  

Basic Rating      

SCCR   kA 5

max. Fuse   A 45

max. CB   A 60

480 V High Fault      

SCCR (fuse)   kA 30/100

max. Fuse   A 25 Class RK5/45 Class J

600 V High Fault      

SCCR (fuse)   kA 30/100

max. Fuse   A 25 Class RK5/45 Class J

Special Purpose Ratings      

Electrical Discharge Lamps (Ballast)      

480V 60Hz 3phase, 277V 60Hz 1phase   A 20

600V 60Hz 3phase, 347V 60Hz 1phase   A 20

Incandescent Lamps (Tungsten)      

480V 60Hz 3phase, 277V 60Hz 1phase   A 14

600V 60Hz 3phase, 347V 60Hz 1phase   A 14

Resistance Air Heating      

480V 60Hz 3phase, 277V 60Hz 1phase   A 20

600V 60Hz 3phase, 347V 60Hz 1phase   A 20

Refrigeration Control (CSA only)      

LRA 480V 60Hz 3phase   A 60

FLA 480V 60Hz 3phase   A 10

LRA 600V 60Hz 3phase   A 60

FLA 600V 60Hz 3phase   A 10

Definite Purpose Ratings (100,000 cycles acc. to UL 1995)      

LRA 480V 60Hz 3phase   A 72

FLA 480V 60Hz 3phase   A 12

Elevator Control      

200V 60Hz 3phase   HP 2

10/25/2018 Eaton 276830 ED2018 V49.0 EN 5 / 14

 200V 60Hz 3phase   A 7.8

240V 60Hz 3phase   HP 2

240V 60Hz 3phase   A 6.8

480V 60Hz 3phase   HP 7.5

480V 60Hz 3phase   A 11

600V 60Hz 3phase   HP 7.5

600V 60Hz 3phase   A 9

Design verification as per IEC/EN 61439

Technical data for design verification      

Rated operational current for specified heat dissipation In A 12

Heat dissipation per pole, current-dependent Pvid W 0.3

Equipment heat dissipation, current-dependent Pvid W 0

Static heat dissipation, non-current-dependent Pvs W 1.4

Heat dissipation capacity Pdiss W 0

Operating ambient temperature min.   °C -25

Operating ambient temperature max.   °C 60

IEC/EN 61439 design verification      

10.2 Strength of materials and parts      

10.2.2 Corrosion resistance     Meets the product standard's requirements.

10.2.3.1 Verification of thermal stability of enclosures     Meets the product standard's requirements.

10.2.3.2 Verification of resistance of insulating materials to normal heat     Meets the product standard's requirements.

10.2.3.3 Verification of resistance of insulating materials to abnormal heat     Meets the product standard's requirements.
and fire due to internal electric effects

10.2.4 Resistance to ultra-violet (UV) radiation     Meets the product standard's requirements.

10.2.5 Lifting     Does not apply, since the entire switchgear needs to be evaluated.

10.2.6 Mechanical impact     Does not apply, since the entire switchgear needs to be evaluated.

10.2.7 Inscriptions     Meets the product standard's requirements.

10.3 Degree of protection of ASSEMBLIES     Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances     Meets the product standard's requirements.

10.5 Protection against electric shock     Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components     Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections     Is the panel builder's responsibility.

10.8 Connections for external conductors     Is the panel builder's responsibility.

10.9 Insulation properties      

10.9.2 Power-frequency electric strength     Is the panel builder's responsibility.

10.9.3 Impulse withstand voltage     Is the panel builder's responsibility.

10.9.4 Testing of enclosures made of insulating material     Is the panel builder's responsibility.

10.10 Temperature rise     The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.

10.11 Short-circuit rating     Is the panel builder's responsibility. The specifications for the switchgear must be
observed.

10.12 Electromagnetic compatibility     Is the panel builder's responsibility. The specifications for the switchgear must be
observed.

10.13 Mechanical function     The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Power contactor, AC switching (EC000066)

Electric engineering, automation, process control engineering / Low-voltage switch technology / Contactor (LV) / Power contactor, AC switching ([email protected] [AAB718015])

Rated control supply voltage Us at AC 50HZ   V 230 - 230

Rated control supply voltage Us at AC 60HZ   V 240 - 240

Rated control supply voltage Us at DC   V 0-0

Voltage type for actuating     AC

Rated operation current Ie at AC-1, 400 V   A 22

Rated operation current Ie at AC-3, 400 V   A 12

Rated operation power at AC-3, 400 V   kW 5.5

10/25/2018 Eaton 276830 ED2018 V49.0 EN 6 / 14

Rated operation current Ie at AC-4, 400 V   A 7

Rated operation power at AC-4, 400 V   kW 3

Rated operation power NEMA   kW 7.4

Modular version     No

Number of auxiliary contacts as normally open contact     1

Number of auxiliary contacts as normally closed contact     0

Type of electrical connection of main circuit     Screw connection

Number of normally closed contacts as main contact     0

Number of main contacts as normally open contact     3

Approvals
Product Standards     IEC/EN 60947-4-1; UL 60947-4-1; CSA - C22.2 No. 60947-4-1-14; CE marking

UL File No.     E29096

UL Category Control No.     NLDX

CSA File No.     012528

CSA Class No.     2411-03, 3211-04

North America Certification     UL listed, CSA certified

Specially designed for North America     No

10/25/2018 Eaton 276830 ED2018 V49.0 EN 7 / 14

Characteristics

1: Overload relay
2: Suppressor
3: Auxiliary contact modules

10/25/2018 Eaton 276830 ED2018 V49.0 EN 8 / 14

Squirrel-cage motor
Operating characteristics
Starting:from rest
Stopping:after attaining full running speed
Electrical characteristics
Make: up to 6 x rated motor current
Break: up to 1 x rated motor current
Utilization category
100 % AC-3
Typical applications
Compressors
Lifts
Mixers
Pumps
Escalators
Agitators
Fans
Conveyor belts
Centrifuges
Hinged flaps
Bucket-elevators
Air conditioning system
General drives in manufacturing and processing machines

10/25/2018 Eaton 276830 ED2018 V49.0 EN 9 / 14

Extreme switching duty
Squirrel-cage motor
Operating characteristics
Inching, plugging, reversing
Electrical characteristics
Make: up to 6 x rated motor current
Break: up to 6 x rated motor current
Utilization category
100 % AC-4
Typical applications
Printing presses
Wire-drawing machines
Centrifuges
Special drives for manufacturing and processing machines

10/25/2018 Eaton 276830 ED2018 V49.0 EN 10 / 14

Switching conditions for non-motor consumers, 3 pole, 4 pole
Operating characteristics
Non inductive and slightly inductive loads
Electrical characteristics
Switch on: 1 x rated operational current
Switch off: 1 x rated operational current
Utilization category
100 % AC-1
Typical examples of application
Electric heat

10/25/2018 Eaton 276830 ED2018 V49.0 EN 11 / 14

Dimensions

Contactor with auxiliary contact module DILM32-XHI.../DILA-XHI...

Contactor with auxiliary contact module DILA-XHIT…

10/25/2018 Eaton 276830 ED2018 V49.0 EN 12 / 14

Additional product information (links)
IL03407013Z (AWA2100-2126) Contactors

IL03407013Z (AWA2100-2126) Contactors ftp://ftp.moeller.net/DOCUMENTATION/AWA_INSTRUCTIONS/IL03407013Z2018_07.pdf

Motorstarter und „Special Purpose Ratings” http://www.eaton.eu/ecm/groups/public/@pub/@europe/@electrical/documents/content/pct_3258146_de.pdf

für den Nordamerikanischen Markt

Switchgear of Power Factor Correction http://www.moeller.net/binary/ver_techpapers/ver934en.pdf

Systems

X-Start - Modern Switching Installations http://www.moeller.net/binary/ver_techpapers/ver938en.pdf

Efficiently Fitted and Wired Securely

Mirror Contacts for Highly-Reliable Information http://www.moeller.net/binary/ver_techpapers/ver944en.pdf

Relating to Safety-Related Control Functions

Effect of the Cabel Capacitance of Long Control http://www.moeller.net/binary/ver_techpapers/ver949en.pdf

Cables on the Actuation of Contactors

Switchgear for Luminaires http://www.moeller.net/binary/ver_techpapers/ver955en.pdf

10/25/2018 Eaton 276830 ED2018 V49.0 EN 13 / 14

Standard Compliant and Functionally Safe http://www.moeller.net/binary/ver_techpapers/ver956en.pdf
Engineering Design with Mechanical Auxiliary
Contacts

The Interaction of Contactors with PLCs http://www.moeller.net/binary/ver_techpapers/ver957en.pdf

Busbar Component Adapters for modern http://www.moeller.net/binary/ver_techpapers/ver960en.pdf

Industrial control panels

10/25/2018 Eaton Industries GmbH 14 / 14

http://www.eaton.eu
© 10/2018 by Eaton Industries GmbH
Eaton 276830 ED2018 V49.0 EN