SINAMICS CU230P-2 HVAC Data Sheet
Uploaded by
Ryan TorresSINAMICS CU230P-2 HVAC Data Sheet
Uploaded by
Ryan TorresData sheet for SINAMICS Control Unit CU230P-2 HVAC
MLFB-Ordering data
6SL3243-0BB30-1HA3
Figure similar
Client order no. : Item no. :
Order no. : Consignment no. :
Offer no. : Project :
Remarks :
Electrical data Ambient conditions
Operating voltage via Ambient temperature
The Power Module DC 24 V Operation -10 ... 60 °C (14 ... 140 °F)
External power supply DC 20 ... 29 V Storage -40 ... 70 °C (-40 ... 158 °F)
Max. power consumption 0.50 A Relative humidity
Power loss 5.50 W Max. operation 95 %
Inputs / outputs Communication
Standard digital inputs Communication RS485
Number 6 Closed-loop control techniques
Switching level: 0→1 11 V V/f linear / square-law / parameterizable Yes
Switching level: 1→0 5V V/f with flux current control (FCC) Yes
Fail-safe digital inputs V/f ECO linear / square-law Yes
Number 0 (No fail-safe inputs available) Sensorless vector control Yes
Vector control, with sensor No
Digital outputs
Encoderless torque control Yes
Number as relay changeover contact 2
Torque control, with encoder No
Output (inductive load) DC 250 V, 2 A
Output (resistive load) DC 30 V, 1 A Standards
Number as relay NO contact 1 Compliance with standards UL, cUL, CE, C-Tick (RCM)
Output (resistive load) DC 30 V, 1 A
CE marking Low-voltage directive 2006/95/EC
Analog / digital inputs
Number 2 (Differential input) Mechanical data
Analog outputs Degree of protection IP20
Net weight 0.61 kg
Number 2 (Non-isolated output)
Width 73.0 mm
Connections
Height 199.0 mm
Signal cable
Depth 65.5 mm
Conductor cross-section 0.15 ... 1.50 mm² (28 ... 16 AWG)
Technical data are subject to change! There may be discrepancies between calculated and rating plate values.
Generated Mon Feb 13 14:52:08 CET 2017
Page 1 of 1
