SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.
, LTD
http://www.szsyjc.com
CUSTOMER NAME India-IOhertz Technologies Pvt Ltd
CUSTOMER P/N
PART NAME 865 to 867MHz 3dBi outdoor antenna
P/ N YJC-60302-G01
APPROVAL REV. A0
DELIVERY DATE 2018-06-15
PREPARED BY Mr Hu
CHECKED BY Mr Wu
APPROVED BY
Customer Approved
Prepared By Checked By Approved By
Factory
Company Address: 7th Floor Building A, Baishunjia Industrial Park, Jiangshi Community, Gongming Street,
Guangming Newly District, Shenzhen, China.（zip: 518106）.
Tel: +86-755-27810060/23192199 Fax：+86-755-27810057
Web：http://www.szsyjc.com E-mail: [email protected]
1/6
SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO., LTD
http://www.szsyjc.com
Catalogue
1、 COVER·
·····································································1
2、 Catalogue·
·································································2
3、 Antenna plan·
······························································3
4、 Antenna technical parameters and environmental performance testing·
·····4
5、 Antenna physical map·
······················································5
6、 Antenna performance test·
··················································5
7、 ROHS material control report·
··············································6
2/6
SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO., LTD
http://www.szsyjc.com
Antenna plan：
3/6
SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO., LTD
http://www.szsyjc.com
Antenna technical parameters and environmental performance testing
Electrical Specifications Mechanical Specifications
Frequency Range 865-867MHz Antenna Color GRAY
VSWR ＜3.0 Input connector N PLUG
Input Impedance 50 Ω Cable length 500 mm
Direction All Working Temperature -40℃~+85℃
Gain 3.0 dBi Working Humidity 20~80%
Environmental performance test
Project Test condition Standard
In the absence of specified test
temperature, humidity, air pressure is as
Storage follows:: Electrical and mechanical
Conditions 1. Temperature is - 30 ℃ ~ + 80 ℃ performace is normal
2. Relative humidity of 45% to 45%
3. Air pressure is 86 kpa to 106 kpa
High and Size should meet the
Between 70 ℃ and -20 ℃ for 5 loops,
low requirements and meet
then 1-2 h under normal conditions, check
temperature the performance of
the appearance quality.
test mechinery and electric.
95 + / - 3% relative humidity, temperature
Constant
test: 40 ℃. Lasts 2 h after, try to take out Size should meet the
damp and
the determination of electrical properties, requirements and meet
hot
within 5 min after try 1-2 h under article the performance of
resistance
normal thing, check the appearance mechinery and electric.
test
quality
10-55 hz, vibration frequency range of
vibration displacement amplitude: 0.35 MM, Electrical and mechanical
test acceleration amplitude: 50.0 M/S, sweep performace is normal
cycles: 30 times
Fall down 1 m high altitude in accordance with the Electrical and mechanical
test perpendicular axis free drop 3 times performace is normal
4/6
SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO., LTD
http://www.szsyjc.com
Antenna physical map
Antenna performance test
5/6
SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO., LTD
http://www.szsyjc.com
Material RoHS conformity declaration form
We hereby certify that the raw materials used and the additives in the production engineering of the products to your company are
conformed to the RoHS environmental requiremetns. (RoHS directive 2011/65 / EU)
About the report of composition of raw materials, packaging materials and additives used in the production process for components
and auxiliary materials is as bellow:
Content of harmful substances (ppm) PASS?
Component Material
ICP report # Test Org. Test Date
/Part Name Composition 6+
Cd Pb Hg Cr PBB PBDE PASS
Copper Copper CANEC1709656502 SGS 18.03.12 ND ND ND ND ND ND PASS
PTFE POD CANEC1723976301 SGS 17.12.08 ND 10 ND ND ND ND PASS
N PLUG Copper CANEC1802313601 SGS 18.02.02 30 28759 ND ND ND ND PASS
Ni coating SZXEC1800220303 SGS 18.03.28 ND 26 ND ND ND ND PASS
6/6
