Scribd
Upload
340 views1 page

Precision Drilling International Task Risk Assessment Worksheet

The document is a risk assessment worksheet for changing a forklift tire on Rig 174. It identifies hazards such as hand injuries from pinch points during the task. Steps are outlined to place blocks, jack up the vehicle, remove the tire nuts, install the spare tire and reattach the nuts, then lower the vehicle and remove the jack. Mitigation measures are identified such as using proper hand tools and avoiding placing hands in pinch points. The residual risks are calculated and most are found to be tolerable after applying the risk reduction measures during the tire change process.

Uploaded by

Abdul Hameed Omar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
340 views1 page

Precision Drilling International Task Risk Assessment Worksheet

The document is a risk assessment worksheet for changing a forklift tire on Rig 174. It identifies hazards such as hand injuries from pinch points during the task. Steps are outlined to place blocks, jack up the vehicle, remove the tire nuts, install the spare tire and reattach the nuts, then lower the vehicle and remove the jack. Mitigation measures are identified such as using proper hand tools and avoiding placing hands in pinch points. The residual risks are calculated and most are found to be tolerable after applying the risk reduction measures during the tire change process.

Uploaded by

Abdul Hameed Omar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Precision Drilling International

TASK RISK ASSESSMENT WORKSHEET


Facility: Rig 174 Original Issue Date: SEP-9-05 Date: Page 1 of TRA # : 16 1 Rev:0
Supervisor:
Work Group Preparing TRA:
(Name & Position) Rig Manager
Description of work activities: CHANGE FORK LIFT TYRE SOP Ref # (If Applicable):
List unusual physical or operational factors, existing or expected during this tour, which will cause a departure from or changes to the content below within this TRA:

List the measures to be taken in recognition of the points mentioned above:

L - LIKELIHOOD S - SEVERITY R - RATING RESULT

SEVERITY
CATEGORY DEFINITION CATEGORY DEFINITIONS L 1 2 3 Acceptable
LOW (1) Remote LOW (1) Minor Injury No Damage No Pollution M 2 4 6 Tolerable
MEDIUM (2) Possible MEDIUM (2) Serious Injury Minor Damage Minor Pollution H 3 6 9 Unacceptable
HIGH (3) Probable HIGH (3) Major Injury Major Damage Major Pollution L M H TRA Policy Reference
IS THERE A SAFER WAY TO COMPLETE THE JOB? ARE THERE ALTERNATIVES WITH LESS RISK? LIKELIHOOD 03-31-PRO
Residual Acceptable?
Risk Reduction
Step Task Hazard Risk Tolerable ?
Measure
L S R L S R Unacceptable?

Place chocks/blocks on the tyre diagonally Avoid pinch point &


1 opposite the one to be replaced. Hand injury 3 2 6 block to fall on hands 2 2 4 Tolerable

Avoid pinch point &


block to fall on
2 Place jack at suitable lifting point, lift the vehicle. Hand injury 3 2 6 handscheck the jack. 2 2 4 Tolerable
3 Remove the nuts and tire. Hand injury 3 2 6 Use proper hand tool 3 1 3 Tolerable

Install the spare tyre, replace the nuts (beveled Avoid pinch point &
4 face in) & with the wrench tighten the Hand injury 3 2 6 tyre to fall on hands 2 2 4 Tolerable
5 Lower the vehicle & remove the jack. Hand injury 3 3 9 Keep hands away 2 1 2 Accebtable
0 1 0
0 1 0
0 1 0

You might also like