MRHT SERIES

Rockbreaker System

At A Glance
Operating Weights: lb. (kg.)
Model Boom only Complete System*
MRHT16….... 12,043 (5462) 18,027 (8176) – 22,343 (10133)
MRHT20…… 12,443 (5643) 18,337 (8316) – 21,103 (9571)
MRHT2025… 12,743 (5779) 18,637 (8452) – 20,743 (9407)
MRHT25…… 13,243 (6006) 19,237 (8724) – 21,343 (9679)
* complete system from smallest to largest appropriate hammer, including
FEATURES & BENEFITS
electric-hydraulic power pack and controls
High strength steel (bent, 4-plate) construction
65 ksi tensile strength; 50 ksi yield strength for longer
Dimensions: in (mm) service life
Model Length x Width* Working length** Base (L x W)
Reinforced pivot and mounting pin joints from improved
MRHT16….. 251 x 53.5 183.0 (4648) 62.75 x 53.5
(6375 x 1359) (1594 x 1359)
durability
MRHT20….. 297 x 53.5 229.4 (5827) 62.75 x 53.5 Hardened steel bushings in pivot joints and larger
(7544 x 1359) (1594 x 1359) diameter pivot pins provide reduced bearing pressure
MRHT2025.. 333 x 53.5 265.2 (6736) 62.75 x 53.5 and increased service life
(8458 x 1359) (1594 x 1359)
MRHT25….. 352 x 53.5 277.1 (7038) 62.75 x 53.5 Thicker pedestal base plate – 1.5” (38 mm)
(8941 x 1359) (1594 x 1359)
* less hammer Pedestal mounting bolt pattern matches TM-H & X
** swing pivot to dipperstick / hammer mounting pin (on-center) dimension MRH series for ease of installation and reduced
expense of replacement
Operating Parameters Increased cross sectional strength of boom and dipper
where high stress is realized
Model Hammer Model Range: ft-lb (J)
MRHT16….... BX20: 2000 (2711) thru BXR85: 8500 (11524) Common cylinder for hoist (lift), crowd (stick) and curl
MRHT20…… BX20: 2000 (2711) thru BXR65: 6500 (8812) (tilt) functions
MRHT2025… BX20: 2000 (2711) thru BXR50: 5000 (6779)
Tilt & Lift valve stand for improved serviceability
MRHT25…… BX20: 2000 (2711) thru BXR50: 5000 (6779)
Legend: Standard Optional
 MRHT Series Pedestal Rock Breaker System
BOOM & HAMMER COMBINATIONS

Hammer Specifications
Hammer Models: BX20 BX30 BX40 BXR50 BXR65 BXR85

Impact Energy 2000 3000 4000 5000 6500 8500

Class: ft-lb (J) (2711) (4067) (5423) (6779) (8812) (11524)

Operating Weight: 2094 (950) 2866 3749 3880 4563 6463

lb. (kg.) (1300) (1700) (1760) (2070) (2931)

Working Length in. 90.4 99.8 108.8 107.0 110.8 127.6

(mm) (2295) (2535) (2764) (2718) (2813) (3240)

Tool Diameter 4.2 (105) 4.8 (120) 5.1 (135) 5.5 (140) 5.9 (150) 6.3 (160)
in. (mm)

Operating Flow 24-29 (90- 27-37 29-42 38-54 42-60 52-75

gpm (lpm) 100) (100-140) (110-160) (144-204) (158-227) (197-284)

Note: Horizontal reach Operating Pressure 1740-2320 1740-2465 1885-2465 2180-2760 2180-2760 2180-2760
originates from (swing)
psi (bar) (120-160) (120-170) (120-170) (150-190) (150-190) (150-190)
center of pedestal base.
Deduct 31” (787 mm)
minimum to front edge Impact Frequency 350-600 400-600 380-600 374-611 341-561 328-544
of pedestal base for bpm (short stroke) (514-840) (454-746) (436-723)
clearance.
Sound / Distance* 100 (30) 121 (37) 135 (41) 142 (43) 146 (44) 150 (45)
at 85 dB(A): ft. (m)

(*): BX & BXR hammers are furnished with a sound suppressing housing for superior noise attenuation. Noise levels may vary due to site conditions and barriers.

Coverage
MRHT16 MRHT20 MRHT2025 MRHT25
ft. (m) BX20 BX30 BX40 BXR50 BXR65 BXR85 BX20 BX30 BX40 BXR50 BXR65 BX20 BX30 BX40 BXR50 BX20 BX30 BX40 BXR50

A 3’-2”
(1.0)
4’-0”
(1.2)
4’-9”
(1.9)
4’-7”
(1.4)
4’-11”
(1.5)
6’-3”
(1.91
3’-8”
(1.1)
4’-6”
(1.4)
5’-3”
(1.6)
5’-1”
(1.5)
6’-9”
(2.1)
3’-10”
(1.2)
4’-8”
(1.4)
5’-5”
(1.7)
5’-3”
(1.6)
3’-10”
(1.2)
4’-8”
(1.4)
5’-5”
(1.7)
5’-3”
(1.6)

B 6’-11”
(2.1)
6’-11”
(2.1)
6’-11”
(2.1)
6’-11”
(2.1)
6’-11”
(2.1)
6’-11”
(2.1)
7’-5”
(2.3)
7’-5”
(2.3)
7’-5”
(2.3)
7’-5”
(2.3)
7’-5”
(2.3)
6’-7”
(2.0)
6’-7”
(2.0)
6’-7”
(2.0)
6’-7”
(2.0)
6’-7”
(2.0)
6’-7”
(2.0)
6’-7”
(2.0)
6’-7”
(2.0)

C 16’-5”
(5.0)
16’-5”
(5.0)
16’-5”
(5.0)
16’-5”
(5.0)
16’-5”
(5.0)
16’-5”
(5.0)
20’-1”
(6.1)
20’-1”
(6.1)
20’-1”
(6.1)
20’-1”
(6.1)
20’-1”
(6.1)
21’-7”
(6.6)
21’-7”
(6.6)
21’-7”
(6.6)
21’-7”
(6.6)
24’-7”
(7.5)
24’-7”
(7.5)
24’-7”
(7.5)
24’-7”
(7.5)

D 23’-5”
(7.1)
23’-11”
(7.3)
24’-5”
(7.5)
24’-3”
(7.5)
24’-7”
(7.5)
25’-9”
(7.9)
27’-5” 27’-11”
(8.5)
28’-5”
(8.7)
28’-3”
(8.6)
28’-7”
(8.7)
29’-6”
(8.9)
29’-7”
(9.0)
30’1”
(9.2)
29’11”
(9.1)
32’-1”
(9.8)
32’-7”
(9.9)
33’-1”
(10.1)
32’-11”
(10.0)
(8.4)

E 17’-2”
(5.2)
17’-2”
(5.2)
17’-2”
(5.2)
17’-2”
(5.2)
17’-2”
(5.2)
17’-2”
(5.2)
18’-8”
(5.7)
18’-8”
(5.7)
18’-8”
(5.7)
18’-8”
(5.7)
18’-8”
(5.7)
18’-8”
(5.7)
18’-8”
(5.7)
18’-8”
(5.7)
18’-8”
(5.7)
21’-6”
(6.6)
21’-6”
(6.6)
21’-6”
(6.6)
21’-6”
(6.6)

F 13’-8”
(4.2)
14’-4”
(4.4)
15’-3”
(4.6)
15’-1”
(4.6)
15’-5”
(4.7)
16’-9”
(5.1)
15’-8”
(4.8)
16’-6”
(5.0)
17’-3”
(5.3)
17’-1”
(5.2)
17’-9”
(5.4)
19’-6”
(5.9)
20’-4”
(6.2)
21’-1”
(6.4)
20’-11”
(6.4)
20’-4”
(6.2)
21’-2”
(6.4)
21’-11”
(6.7)
21’-9”
(6.6)

G 10’-4”
(3.1)
10’-4”
(3.1)
10’-4”
(3.1)
10’-4”
(3.1)
10’-4”
(3.1)
10’-4”
(3.1)
11’-11”
(3.6)
11’-11”
(3.6)
11’-11”
(3.6)
11’-11”
(3.6)
11’-11”
(3.6)
13’-3”
(4.0)
13’-3”
(4.0)
13’-3”
(4.0)
13’-3”
(4.0)
15’-0”
(4.6)
15’-0”
(4.6)
15’-0”
(4.6)
15’-0”
(4.6)

Concave Removal Tool

Tool Selection (for aggregate production and mining) For Gyratory Crusher

• Blunt is used for boulder and oversize breaking; tool impact

delivers the stress wave generated by the hammer causing the adapter detail
material to fracture; excellent wear resistance
bucket tooth
• Chisel is suitable for slabby, angular material; tool provides (supplied by customer)
wedge effect impact and good penetration hammer

• Moil is ideal for softer, abrasive material where high penetration is tool adapter
needed; similar to the blunt it results in less torque in the front head
Note: Adapter tool length is 72 in. (1829 mm) long plus adapter and tooth
2 BREAKER TECHNOLOGY MRHT ROCKBREAKER SYSTEM www.rockbreaker.com
 MRHT Series Pedestal Rock Breaker System
HAMMER SELECTION GUIDE FOR BLASTED MATERIAL*

IMPERIAL MEASUREMENTS
BOULDER SIZE - yd3

Material Hardness < 0.5 yd3 0.5 – 1.0 yd3 1.0 – 2.0 yd3 2.0 – 4.0 yd3 4.0 – 6.0 yd3 6.0 – 8.0 yd3 8.0 – 10 yd3
Compressive Strength

Very Hard........ 35-45 ksi 2,000 ft-lb 3,000 ft-lb 4,000 ft-lb 5,000 ft-lb 6,500 ft-lb 8,500 ft-lb 10,000 ft-lb
examples: gneiss, schist,
andesite, gold ore

Hard................. 25-35 ksi 1,500 ft-lb 2,000 ft-lb 3,000 ft-lb 4,000 ft-lb 5,000 ft-lb 6,500 ft-lb 8,500 ft-lb
examples: siliceous limestone, basalt,
granite, trap rock, copper ore

Medium Hard… 15-25 ksi 1,000 ft-lb 1,500 ft-lb 2,000 ft-lb 3,000 ft-lb 4,000 ft-lb 5,000 ft-lb 6,500 ft-lb
examples: dolomite, siliceous and
dolomitic limestone

Soft................... 10-15 ksi 800 ft-lb 1,000 ft-lb 1,500 ft-lb 2,000 ft-lb
examples: soft limestone, gypsum

(*): 1 ksi = 1,000 psi (lbs. / in.2), ranges provided due to possible layer presence and density variance.

METRIC MEASUREMENTS
BOULDER SIZE - m3

Material Hardness < 0.5 m3 0.5 – 1.0 m3 1.0 – 2.0 m3 2.0 – 4.0 m3 4.0 – 6.0 m3 6.0 – 8.0 m3 8.0 – 10.0 m3
Compressive Strength

Very Hard........ 241-310 MPa 3,000 ft-lb 4,000 ft-lb 5,000 ft-lb 6,500 ft-lb 8,500 ft-lb 10,000 ft-lb 12,000 ft-lb
examples: gneiss, schist,
andesite, gold ore

Hard…………. 172-241 MPa 2,000 ft-lb 3,000 ft-lb 4,000 ft-lb 5,000 ft-lb 6,500 ft-lb 8,500 ft-lb 10,000 ft-lb
examples: siliceous limestone, basalt,
granite, trap rock, copper ore

Medium Hard..103-172 MPa 1,500 ft-lb 2,000 ft-lb 3,000 ft-lb 4,000 ft-lb 5,000 ft-lb 6,500 ft-lb 8,500 ft-lb
examples: dolomite, siliceous and
dolomitic limestone

Soft................. 69-103 MPa 1,000 ft-lb 1,500 ft-lb 2,000 ft-lb 3,000 ft-lb
examples: soft limestone, gypsum

(*): 1 MPa = 145 psi (lbs. / in.2), ranges provided due to possible layer presence and variance.

3 BREAKER TECHNOLOGY MRHT ROCKBREAKER SYSTEM www.rockbreaker.com

 MRHT Series Pedestal Rock Breaker System
DESIGN and ENGINEERING DATA

Design Data: in (mm)

• Mounting bolt size: 1.5 in. dia. (ø 38) x7 thru holes @ 1.75 in. dia. (ø 44)
• Mounting bolt torque: 1,450 ft-lb (1,966 N-M)
• Swing Angle: 330º (-165º / +165º)
• 81CC Swing Motor – 2000 psi (138 bar) Internal Relief

Pivot Pin Data: in. (ø mm)

•4.0 (ø 102) Pedestal Base-to-Hoist Boom; Hoist Boom-to-Dipperstick (Jib)
• 3.0 (ø 76): Hammer Mounting

Cylinder data: Bore ø / Rod ø / Stroke Cylinder mounting pins

• Hoist (lift): 6.0 / 3.50 / 48.5 (152 / 89 / 1232) 3.0 (76)
• Stick (crowd): 6.0 / 3.50 / 48.5 (152 / 89 / 1232) 3.0 (76)
• Tilt (curl): 6.0 / 3.50 / 48.5 (152 / 89 / 1232) 3.0 (76) Pedestal Base Dimension: MRHT16 - MRHT20 – MRHT2025 - MRHT25

Engineering Data: Loads and Moments

Imperial
Static Overturning Dynamic Overturning
Moments: ft-lb (+/-) Loads: lbs. (+/-) Moments: ft-lb (+/-)
MH*: 267,000 / 0 FS*: 10,105 / 10,105 MH: 534,000 / 0
MV: 23,400 / 23,400 FV: 0 / 22,000 MV: 46,800 / 46,800
MS*: 267,000 / 267,000 FH*: 10,105 / 10,105 MS: 534,000 / 534,000
Swing Torque: 23,400 ft-lb

Metric
Static Overturning Dynamic Overturning
Moments: kN-M (+/-) Loads: kN (+/-) Moments: kN-M (+/-)
MH*: 362 / 0 FS*: 45 / 45 MH: 724 / 0
MV: 32 / 32 FV: 0 / 96 MV: 64 / 64
MS*: 362 / 362 FH*: 45 / 45 MS: 724 / 724
Swing Torque: 32 kN-M MRHT16 – MRHT20 - MRHT2025 - MRHT25
(*): FS or FH and MH or MS are swing function results and do not happen simultaneously

Cross Sectional Data: Section Height x Width - in (mm)

Hoist / Inner Boom Dipperstick / Outer (Jib) Boom
MRH16…................18.4 x 15.5 24.3 x 11.5
(468 x 394) (616 x 292) Lifting Capacities: lb. (kg.)
MRH20…………….18.4 x 15.5 25.6 x 11.5 MRHT16…......... 10,829 (4922)
(468 x 394) (649 x 292)
MRHT20………. 7,750 (3523)
MRH2025………….18.4 x 15.5 29.4 x 11.5
(468 x 394) (748 x 292) MRHT2025……. 6,500 (2948)
MRH25…………….18.4 x 15.5 29.4 x 11.5 MRHT25………. 5,250 (2386)
(468 x 394) (748 x 292) Calculated at full extension, value increases closer to the swing post

4 BREAKER TECHNOLOGY MRHT ROCKBREAKER SYSTEM www.rockbreaker.com

 MRHT Series Pedestal Rock Breaker System
HYDRAULIC and ELECTRICAL SYSTEMS
Power Pack Specifications
Power Pack (PP) Model PP100-50 PP100-60 PP100-100 PP100-100 PP100-100 PP100-125
(Reservoir size - Hp)
Matched w/ Hammer Model BX20 BX30 BX40 BXR50 BXR65 BXR85

Horsepower (kW) 50 (37) 60 (45) 100 (75) 100 (75) 100 (75) 125 (93)

Operating Weight: (w/o oil) lb. 2000 (910) 2300 (1045) 2400 (1090) 2400 (1090) 2400 (1090) 3000 (1364)
(kg.)
Dimensions: L x W x H 66 x 36x 60 66 x 36 x 81 66 x 36 x 81 66 x 36 x 81 66 x 36 x 81 66 x 36 x 81
in. (mm) (1676 x 914 x 1524) (1676 x 914 x 2057) (1676 x 914 x 2057) (1676 x 914 x 2057) (1676 x 914 x 2057) (1676 x 914 x 2057)

Max. Pump Flow gpm (lpm) 60 (227) 60 (227) 60 (227) 60 (227) 60 (227) 60 (227)

Regulated Pump Flow gpm (lpm) 29 (110) 37 (140) 54 (204) 54 (204) 54 (204) 58 (220)

Pump Pressure psi (bar) 3600 (250) 3600 (250) 3600 (250) 3600 (250) 4200 (290) 4200 (290)

Pressure Filter Flow 60 (227) 100 (379) 147 (556) 147 (556) 147 (556) 147 (556)
Capacity gpm (lpm)
Air-to-Oil Cooler c/w Optional Standard Standard Standard Standard Standard
½ HP motor (56T frame)

Filtration Micron Filtration Area Flow Capacity By-Pass Maximum Pressure Electric Motor 50 HP 60 HP 100 HP 125 HP
sq. in. (sq. mm) gpm (lpm) psi (bar) Rating psi (bar) (Pump Drive)
TEFC (IP55) Frame Size 404/5T
Pressure Filter 10 415 (2677) varies - see chart 75 (5) 5075 (350) 326T 364/5T 404/5T
High Efficiency 444/5T
above
Prem. Efficiency
Return Filter 10 1100 (7100) 130 (490) 22 (1.5) n/a RPM / Service Factor 1800 / 1.25 1800 / 1.25 1800 / 1.25 1800 / 1.15
Efficiency & Power Factor @ 94.5 / 84.0 95.0 / 87.0 95.4 / 87.0 95.8 / 88.0
Suction Strainer 10 415 (2677) 60 (225) 75 (5) 6,000 (410)
100%
Note: Power Pack Assembly also includes Pressurized reservoir capacity is 100 gal. (353 liters); Vent pressure relief is 4 psi AC Voltage / Phase / Hertz 380 / 3 / 50 380 / 3 / 50 380 / 3 / 50 380 / 3 / 50
(2.8 bar); Visual indicators provided on both pressure and return filters; low-oil level cut-off switch; pressurized filler cap., tank (other combinations available 460 / 3 / 60 460 / 3 / 60 460 / 3 / 60 460 / 3 / 60
clean–out access cover; oil level gauge; temperature gauge; pump load sense bulkhead & connector, drain port & valve to suit site) 575 / 3 / 60 575 / 3 / 60 575 / 3 / 60 575 / 3 / 60
Current: Full Load /
58.4 / 355 68.0 / 430 112 / 725 139 / 907
Locked Rotor (amps)
Power Pack (HPU) Options Torque: Full Load Torque
Oil Tank Immersion Heater c/w thermostat; High/Low Temperature Sensor; Motor Starter Panel; 148 (201) 177 (240) 295 (400) 368 (499)
ft-lb (N-m)
Recirculation Valve; High Altitude Provision; Motor Deration Package in 3,281 ft. (1000 meters); Drip
tray; Hand pump; Motor Terminal Blocks; Water-over-Air Cooler pkg.; Cold Weather Conversion Kit Note: NEMA Design B; Class “F” insulation; Altitude 3,300 ft. (1000 m) a.s.l.; Ball bearings; Continuous duty;
Energy savings > EFF1 minimum efficiency (CC029A certification); Premium eff. meets IEEE841 standard

Remote Controls
Electric-Hydraulic Control Console Additional Electric-Hydraulic
•Sturdy Framed Stand – 48 in. (1219 mm) height
Control Options
•2-Dual Axis Joysticks – R.H. Thumb Hammer Op.
•Remote Control Panel for remote
•SAE Mapping / Excavator Control Pattern + start/stop of power pack, c/w indicator
•Console On/Off Button
switches / lamps
•Pedestal EHC Enclosure
•Additional length remote control
•30 ft. (9.1 m)* cable
umbilical cable length > 30 ft. (9.1 m)
•Powered by local 110/115 VAC (See distance options below)

Control System Options

Portable Electric- Hydraulic Radio Remote Control Manual Control Console Ergonomics Operator’s Seat
Control (transmitter & receiver system) c/w Electric-Hydraulic Control

Distance Options ft. (m)

•Standard EHC configuration - 100 (30) to 200 (60) • Radio Remote option - 328 (30) max. • Coaxial Cable (Pan-Zoom Camera) option – 1,500 (457)
•Deluxe EHC configuration - 200 (60) to 400 (120) • Parker IQAN (can-bus) option - 328 (30) max. • Fiber Optics (Pan-Zoom Camera) option – 7 miles (11.2K m)

5 BREAKER TECHNOLOGY MRHT ROCKBREAKER SYSTEM www.rockbreaker.com

 MRHT Series Pedestal Rock Breaker System
ROCKBREAKER SYSTEM STANDARD FEATURES
Standard Optional

Notes: Power Packs

• 50 HP & 60 HP power pack for BX20 & BX30 respectively
• 40 HP & 50 HP power pack for BX20 & BX30 respectively in lighter applications
• High efficient grade main pump drive motor
• Premium efficient (IEEE841) main pump drive motor (optional energy efficient)
• Main electric motor altitude acceptance limit: 3,280 ft. (1000 m)
• High Altitude: motor impeller charge kit > 5,000 ft (1,500 m); and
• High Altitude: motor altitude deration, provided in 1000 m increments > 3,280 ft.
(1000 m) up 16,400 ft. (5000 m)
• Continuous oil circulation valve for high duty & temperature applications
• High/low temperature sensor
• Immersion heater – 2kW (circuit breaker & contactor optional with starter panel)
• Motor Starter panel (40, 50, 60, 100 or 125 HP mounting & wiring also optional)
• Remote power pack start / stop panel with indicator switches and lamps
/ • Air-to-oil Cooler (std. for BX30 & larger units; opt. for BX20 & smaller units)
• Water-over-oil Cooler
• Cold weather conversion kit (with dual immersion heaters, heat tape, etc.)
/ • 10 ft. (3 m) Supply hoses –optional longer lengths up to 25 ft. (7.6 m)
Control System:
• Stand-mounted electro-hydraulic joystick remote controller package
• Portable electro-hydraulic remote joystick controller package
• Secondary Stand-mounted electro-hydraulic remote joystick controller package
• Hand-held Radio Remote (transmitter-receiver) joystick controller package
• IQAN (can-bus) joystick controller package (override handles also optional)
• 30 ft. (9.1 m) remote control cable
• > 30 ft. (9.1 m) remote control cable – available up to 100 ft. (30 m)
• 100 to 200 ft. (30 – 60 m) long distance cable
• 200 to 400 ft. (60 – 80 m) long distance cable

Greasing System: (2-grease system: moly / lithium for boom, chisel past for hammer)
• Individual / point-to-point manual greasing of boom and hammer
• Manual-Centralized Grease system; Hydraulic auto lubrication system
• Pneumatic auto lubrication system

Pedestal Boom and Hammer Units

• Counter-balance valve package
• Anti-Lunge provision
• Anti-Blank fire provision
• Fire suppression system (Ansul: manual, “Automan” or “Check-fire”)
• Hammer tool – choice of (blunt, chisel, moil; blunt std. on BX20 & larger hammers)
• Hammer severe duty wear kit with rock claws (separate claws also optional)

6 BREAKER TECHNOLOGY MRHT ROCKBREAKER SYSTEM www.rockbreaker.com

 Rockbreaker Boom Systems Warranty Policy
REV 09/04
WARRANTY POLICY
1. BREAKER TECHNOLOGY INC. Company (hereinafter referred to as "BTI") warrants this product against
defects in materials and workmanship for a period of twelve (12) months or 2000 hours from the date of
installation, or 18 months from the date of shipment, whichever comes first. This warranty does not cover
o-rings, seals, fittings, hoses, breaker tools or other items considered normal wear items. These are covered
by the LimitedWarranty period of thirty (30) days.Warranty for propriety items such as valves, pumps, filters,
electric motors, panels and componentry that are not manufactured by BTI, will be governed by the warranty
terms of their manufacturer. This warranty is void if BTI's standard installation specifications and procedures
are not adhered to.

2. BTI will authorize return of any defective components or sufficient evidence of such defect to a BTI
warehouse. Such components or such evidence must clearly show that the defect was caused by faulty
material or poor workmanship.Warranty claim will be accepted only if it is submitted on a proper claims form
with proof of purchase and received within sixty (60) days from the date of discovery of the defect.Warranty
claims will be considered only if the "Installation Notice" has been duly filled in and returned to BTI within
thirty (30) days from the date of installation.

3. BTI will at it's option, repair or refurbish the defective part(s) without charge to the initial user or may elect
to issue full or partial credit toward the purchase of a new part(s). The extent of credit issued, which will be in
the form of a "Credit Memo", will be determined by pro-rating against the normal life of the part(s) in
question.

4. BTI is not responsible for mileage, travel time, travel expenses, overtime labor, and any freight expenses
required to facilitate the repair.

5. This warranty does not apply if the product has been damaged by accident, abuse, misuse, misapplication
or neglect, or as a result of service, disassembly or modification, without BTI's express authorization.

6. BTI assumes no liability beyond the replacement of defective parts or materials and/or the correction of
such defective parts or materials.

7. BTI neither assumes nor authorizes any other person to assume for it any liability in connection with the
sale of its products other than that specifically stated herein.

8. THISWARRANTY IS EXPRESSLY IN LIEU OF ANYAND ALL OTHERWARRANTIES. EXCEPT AS

EXPRESSLY SET FORTH HEREIN, BTI MAKES NO REPRESENTATION ORWARRANTY, STATUTORY,
EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS MANUFACTURED AND/OR SUPPLIED
BY BTI, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY
OTHER MATTER. IN NO EVENT, INCLUDING IN THE CASE OF A CLAIM OF NEGLIGENCE, SHALL BTI
BE LIABLE FOR INCIDENTAL ORCONSEQUENTIAL DAMAGES.

www.rockbreaker.com

Breaker Technology, Inc. Breaker Technology, Inc. Breaker Technology Ltd.

30625 Solon Industrial Pkwy. 3453 Durahart Street 35 Elgin Street North
Solon, Ohio 44139 USA Riverside, CA 92507 Thornbury, Ontario N0H 2P0
(440) 248-7168 / 8645 Ph. / Fx. (951) 369-0878 / 8281 Ph. / Fx. (519) 599-2015 / 6803 Ph. / Fx.