Scribd
Upload
126 views

C4C Access Guide

Inside Shell Offices C4C Users can connect to Internet trough Shell Wireless LAN or restricted VLAN. If applicable, a Shell WiFi account has to be requested by yourself or your Shell Host or Sponsor. Outside Shell offices users can connect to Internet as usual. To access the C4C Service you must have your corporate (non-shell) PC registered. Only one PC per user can be registered.

Uploaded by

Shahrunishak
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
126 views

C4C Access Guide

Inside Shell Offices C4C Users can connect to Internet trough Shell Wireless LAN or restricted VLAN. If applicable, a Shell WiFi account has to be requested by yourself or your Shell Host or Sponsor. Outside Shell offices users can connect to Internet as usual. To access the C4C Service you must have your corporate (non-shell) PC registered. Only one PC per user can be registered.

Uploaded by

Shahrunishak
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CLIENT FOR CONTRACTORS (C4C) SERVICE REFERENCE GUIDE

C4C Access Guide v4.1


• Inside Shell Offices C4C Users can connect to Internet trough Shell Wireless LAN or restricted VLAN (Note: C4C
via Shell LAN is currently being investigated). If applicable, a Shell WiFi account has to be requested by yourself
or your Shell Host or Sponsor (depending on your regional set up). If your location has a dedicated VLAN for C4C
Users you will be notified.
• Outside Shell Offices C4C Users can connect to Internet as usual.
• To access the C4C Service you must have your corporate (non-Shell) PC registered. Only one PC per user can be
registered. If you try to access your C4C Account from a different PC than the your registered one, you will be
presented with a locked down version of the C4C Service - Secure Virtual Workspace (SVW). New PCs can be
registered and old de-registered following instruction guides at http://connect.shell.com.
• If you have registered a Vasco token you should use the ‘Normal sign in with a token’. Please see the instructions
below to access the C4C Service. If you have not yet registered a token you will have an emergency access for 7 days
from the creation of your account and you should use the ‘Emergency sign in without a token’ instructions below to
access the C4C Service until your Vasco token is registered. New Vasco tokens can be registered following
instruction guides at http://connect.shell.com.

Shell C4C Helpdesk Contacts:

Americas: +1 713 245 5314 Asia-Pac: +60 3 8317 7202 Europe: +44 161 435 8027

Normal Sign in WITH Token

1 . Go to the C4C Homepage at: http://connect.shell.com


2. Under ‘Access C4C’, select a regional gateway to connect to.
3. Ensure ‘Connecting from Work Computer’ and ‘Access Type Normal’ re selected then click ‘I Accept’ to the GEC
warning.
4. Host Checker will run. Please wait and do not press any key until the login page is shown.
a. a. If the login page does not appear within 5 minutes then close your browser and start again.
b. b. If you continue to have problems please call the Shell C4C Helpdesk on one of the numbers mentioned
above.
5. Enter your C4C username, password, personalised 6 digit PIN and Vasco Token response( OTP) - from pressing the
token button. Click the sign in button to proceed.
6. If your login is successful WSAM will run. Please wait and do not press any key until the C4C web portals welcome
page is shown

Please note: You may be asked to reboot to confirm the WSAM installation. You should reboot and go through the steps
above again

Emergency Sign in WITHOUT Token

1 . Go to the C4C homepage at: http://connect.shell.com


2. Under ‘Access C4C’, select a regional gateway to connect to.
3. Ensure ‘Connecting from your corporate (non-Shell) PC and ‘Access Type Emergency is selected then click ‘I
Accept’ to the GEC warning.
4. Host Checker will run. Please wait and do not press any key until the login page is shown.
a. If the login page does not appear within 5 minutes then close your browser and start again.
b. If you continue to have problems please call helpdesk
5. Enter your C4C username & your C4C Password and click the sign in button to proceed
6. If your login is successful WSAM will run. Please wait and do not press any key until the C4C web portal
welcome page is shown
CLIENT FOR CONTRACTORS (C4C) SERVICE REFERENCE GUIDE

Features of the C4C Web Portal


1. Browse URL box: You can type in any URL and click ‘GO’ to access. 5. Left Navigation Menu
a. Help and guidance: Contains Shell C4C Helpdesk numbers, link to
2. Your Pre-defined Bookmarks – Web Links and File shares: Lists the the FAQ and all C4C Guidance documents.
web links and file shares that have been assigned by your C4C b. FAQ: Lists answers to frequently asked questions.
Focal Point to your C4C account. Click on the links to access. You c. Change my SPQA: Allows you to change the Shell Personal
can also map a network drive by following the instructions under Question and Answer used for your identification
‘Help and Guidance’ in the left Navigation menu on the portal. d. Change my password: Facility to change your centrally
issues password to a more meaningful password.
3. Network Printers: Click on the ‘assigned printers’ link to see a list e. Update my details: Link to the who’s who were you can
of printer names assigned by your focal point to help you when update your C4C account details.
mapping printers. You should be able to map any printer in Shell f. Service Status: Information on any current service
whether it is in the list or not. See the Network Printer User Guide impacting issues or any planned service outages.
link for Instructions on mapping a network printer.
6. Top Right Juniper toolbar
4. Win32 Applications : Lists the win32 applications that have been Move toolbar to left or right
assigned to you by your focal point. Click on the links to access the Home
file share where the win32 installer and configuration guides are
stored. You can then set-up the win32 app for access across C4C. Expand / Collapse

Help

Logout

Key Notes:
1. Ensure Windows Secure Application Manager (WSAM) is running (look for in the system tray) before you:
a. Run any Win32 apps, like Outlook, E2E Service Center or SAP
b. Map a network drive or share folders or network printer

If WSAM is not running you can launch it by using the ‘Click here to re-launch WSAM’ link just under the Win32 Applications heading

2. In order to successfully access certain resources – web applications, win32 applications and file shares - you must have all necessary accounts /
permissions for the resource you are trying to access. Please contact your C4CFocal Point if you have issues accessing these types of
resources.

You might also like