Scribd
Upload
1K views6 pages

MCQs For Computer Science 10th BISE

The document outlines chapters and questions from the 10th class computer science exam. It includes 8 chapters that cover topics like problem solving, data types, control structures, arrays, subprograms, file handling, graphics in BASIC, and Microsoft Word. For each chapter, 8 multiple choice questions are provided testing knowledge of concepts and commands covered in that chapter.

Uploaded by

Habib Ullah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
1K views6 pages

MCQs For Computer Science 10th BISE

The document outlines chapters and questions from the 10th class computer science exam. It includes 8 chapters that cover topics like problem solving, data types, control structures, arrays, subprograms, file handling, graphics in BASIC, and Microsoft Word. For each chapter, 8 multiple choice questions are provided testing knowledge of concepts and commands covered in that chapter.

Uploaded by

Habib Ullah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 6

10th Class Computer Science

Important MCQs

Chapter # 1 Problem Solving


Chapter # 2 Data types, I/O statements
Chapter # 3 Control Structure
Chapter # 4 Arrays
Chapter # 5 Subprogram and File
Handling
Chapter # 6 Graphics in BASIC
Chapter # 7 Microsoft WORD
2

Chapter # 1

1. _______ is grammatical rules of programming language.


a) Semantics b) Syntax c) Both d) None of these
2. Memory over flow is type of __________error.
a) Syntax b) Logical c) Runtime d) all of above
3. ________ is a sequence of ordered steps.
a) Logarithm b) Algorithm c) Matrix d) None of these
4. _________ Symbol is used for processing.
a) Oval b) Rectangle c) diamond d) connector
5. Pictorial representation of algorithm is called___________.
a) Logarithm b) Flow control c) Flow chart d) none of these
6. Program crashes when __________ error occurs.
a) Syntax b) Logical c) Run time d) All of above
7. Errors in a program are called __________.
a) Bug b) Debug c) Fault d) None of these
8. Flow chart is part of _________ document.
a) Requirement b) Design c) Test d) b & c

Chapter # 2
1. GW BASIC was designed in _______.
a) 1960 b) 1963 c) 1970 d) None of these
2. Commands are lost in __________ mode.
a) Indirect b) Direct c) Graphics d) All of above
3.________ key is used to LIST the program.
a) F4 b) F3 c) F1 d) F5

2
3

4.__________ has predefined meanings in BASIC.


a) Keyword b) Special word c) Variables d) none of these
5. 37.4! is example of __________ type number.
a) Integer b) String c) Single precision d) double precision
6.__________ Command is used to rename a file in BASIC.
a) NAME b) RENAME c) RENUM d) None of these
7.__________ operator has lowest precedence.
a) * b) ^ c) + d) None of these
8._________ is example of non executable statement.
a) END b) STOP c) REM d) All of above

Chapter # 3
1._______ is example of unconditional control transfer.
a) ON…GOTO b) GO...SUB c) GOTO d) None of these
2.________is example of repetition control structure.
a) FOR-NEXT b) WHILE-WEND c) BOTH d) None of these
3. IF-THEN_ELSE is example of__________control structure.
a) Sequence b) Repetition c) Selection d) All of above
4. In _________ loop, variable is incremented inside body of loop.
a) FOR b) WHILE c) Nested d) None of these
5. Loop inside body of other loop is called___________Loop.
a) FOR b) DO c) Nested d) All of above
6.__________is multiple branching statement.
a) GOTO b) ON N...GOTO c) GO…SUB d) IF- ELSE
7.__________ is not a logical operator.
a) NEITHER b) NOT c) OR d) All of above
8._________ is used to repeat a set of instructions for specific time.
a) IF-ELSE b) LOOP c) GOTO d) None of these

3
4

Chapter # 4

1._______ is a collection of elements of same type.


a) Variable b) Array c) Loop d) All of above
2. Array is also called __________ variable.
a) Subscripted b) Simple c) Complex d) None of these
3. Marks (6) is example of __________array.
a) 1-D b) 2-D c) dynamic d) All of above
4. Arr (5, 2) has ___________ elements.
a) 52 b) 10 c) 7 d) 20
5. To declare array of 20 elements___________ is used.
a) LET b) DIM c) DO d) None of these
6. 2-D array is also called__________.
a) Vector b) Matrix c) Linear d) None of these
7. By default array index starts from__________.
a) 0 b) 1 c) 2 d) None of these
8. 2-D array is filled with ___________ loop.
a) Single b) FOR c) nested d) all of above

Chapter # 5
1. Standard functions are also called_______ functions.
a) user defined b) Intrinsic c) Both d) None
2.__________ function is used to drop fractional part of a number.
a) ABS b) INT c) FIX d) All of these
3. _________ is not given a name in a program.
a) Function b) procedure c) Subroutine d) none of above

4
5

4. ___________ is used to define a user function.


a) LET b) DIM c) DEF FN d) SUB
5. ___________ is a collection of related fields.
a) table b) Record c) File d) none of these
6.__________ means data will be added to the end of the file.
a) Input b) Output c) append d) all of above
7. The __________ function is used to check for end of file.
a) ERR b) EOF ( ) c) EOL ( ) d) EOF
8.__________ function is used to determine size of string.
a) Size b) length c) LEN d) LN

Chapter # 6
1._______ is the dot on the computer screen.
a) Picture b) resolution c) Pixel d) all of above
2. In________resolution mode, screen is divided into 320x200 pixels.
a) Text b) medium c) high d) None
3. We can draw a line with the help of ___________statement.
a) PSET b) LINE c) Circle d) a & b
4. ___________ statement is used to draw ellipse.
a) Line b) PSET c) CIRCLE d) all of above
5. Background colors available in BASIC is__________.
a) 4 b) 8 c) 12 d) 16
6.__________contains set of colors.
a) SCREEN b) PALETTE c) CIRCLE d) None

5
6

Chapter # 7

1.__________command is used to save file in WORD.


a) CTRL+S b) CTRL+V c) CTRL+X d) None
2.____________ command is used to REDO in WORD.
a) CTRL+Z b) CTRL+Y c) CTRL+ D d) CTRL+S
3. To move cursor at the start of current line__________ key used.
a) CTRL b) HOME c) DEL d) TAB
4. ___________ is available in insert menu.
a) FONT b) DROP CAP c) Hyperlink d) none
5. ____________ key is used for PASTE.
a) CTRL+D b) CTRL+S c) CTRL+V d) CTRL+P
6. Paper size 8.5x11 inch is called__________.
a) Legal b) letter c) A4 d) A3
7.__________key is used for Replace.
a) CTRL+Z b) CTRL+H c) CTRL+F d) CTRL+D
8. MS word is ___________ software.
a) System b) application c) both d) None

You might also like