10/14/2018 Group Codes in Numerical Order [DXF - DXF Reference]

Chapter 1 -- DXF Format

Group Codes in Numerical Order

The following table gives the group code or group code range accompanied by an explanation of the group code
value. In the table, "fixed" indicates that the group code always has the same purpose. If a group code isn't
fixed, its purpose depends on the context. For information about abbreviations and formatting used in this table,
see "Formatting Conventions in This Reference."

Group codes by number

Group Description
code
-5 APP: persistent reactor chain
-4 APP: conditional operator (used only with ssget)
-3 APP: extended data (XDATA) sentinel (fixed)
-2 APP: entity name reference (fixed)
-1 APP: entity name. The name changes each time a drawing is opened. It is never saved (fixed)
0 Text string indicating the entity type (fixed)
1 Primary text value for an entity
2 Name (attribute tag, block name, and so on)
3-4 Other text or name values
5 Entity handle; text string of up to 16 hexadecimal digits (fixed)
6 Linetype name (fixed)
7 Text style name (fixed)
8 Layer name (fixed)
9 DXF: variable name identifier (used only in HEADER section of the DXF file)
10 Primary point; this is the start point of a line or text entity, center of a circle, and so on
DXF: X value of the primary point (followed by Y and Z value codes 20 and 30)
APP: 3D point (list of three reals)
11-18 Other points
DXF: X value of other points (followed by Y value codes 21-28 and Z value codes 31-38)
APP: 3D point (list of three reals)
20, 30 DXF: Y and Z values of the primary point
21-28, DXF: Y and Z values of other points
31-37
38 DXF: entity's elevation if nonzero
39 Entity's thickness if nonzero (fixed)
40-48 Floating-point values (text height, scale factors, and so on)
48 Linetype scale; floating-point scalar value; default value is defined for all entity types
49 Repeated floating-point value. Multiple 49 groups may appear in one entity for variable-length tables
(such as the dash lengths in the LTYPE table). A 7x group always appears before the first 49 group to
specify the table length
50-58 Angles (output in degrees to DXF files and radians through AutoLISP and ObjectARX applications)
60 Entity visibility; integer value; absence or 0 indicates visibility; 1 indicates invisibility
62 Color number (fixed)
66 "Entities follow" flag (fixed)
67 Space-that is, model or paper space (fixed)
68 APP: identifies whether viewport is on but fully off screen; is not active or is off
69 APP: viewport identification number
70-78 Integer values, such as repeat counts, flag bits, or modes

https://www.autodesk.com/techpubs/autocad/acad2000/dxf/group_codes_in_numerical_order_dxf_01.htm 1/3
10/14/2018 Group Codes in Numerical Order [DXF - DXF Reference]

90-99 32-bit integer values

100 Subclass data marker (with derived class name as a string). Required for all objects and entity classes
that are derived from another concrete class. The subclass data marker segregates data defined by
different classes in the inheritance chain for the same object.
This is in addition to the requirement for DXF names for each distinct concrete class derived from
ObjectARX (see "Subclass Markers")
102 Control string, followed by "{<arbitrary name>" or "}". Similar to the xdata 1002 group code, except
that when the string begins with "{", it can be followed by an arbitrary string whose interpretation is
up to the application. The only other control string allowed is "}" as a group terminator. AutoCAD does
not interpret these strings except during drawing audit operations. They are for application use
105 Object handle for DIMVAR symbol table entry
210 Extrusion direction (fixed)
DXF: X value of extrusion direction
APP: 3D extrusion direction vector
220, DXF: Y and Z values of the extrusion direction
230
280- 8-bit integer values
289
290- Boolean flag value
299
300- Arbitrary text strings
309
310- Arbitrary binary chunks with same representation and limits as 1004 group codes: hexadecimal
319 strings of up to 254 characters represent data chunks of up to 127 bytes
320- Arbitrary object handles; handle values that are taken "as is." They are not translated during INSERT
329 and XREF operations
330- Soft-pointer handle; arbitrary soft pointers to other objects within same DXF file or drawing.
339 Translated during INSERT and XREF operations
340- Hard-pointer handle; arbitrary hard pointers to other objects within same DXF file or drawing.
349 Translated during INSERT and XREF operations
350- Soft-owner handle; arbitrary soft ownership links to other objects within same DXF file or drawing.
359 Translated during INSERT and XREF operations
360- Hard-owner handle; arbitrary hard ownership links to other objects within same DXF file or drawing.
369 Translated during INSERT and XREF operations
370- Lineweight enum value (AcDb::LineWeight). Stored and moved around as a short. Custom non-entity
379 objects may use the full range, but entity classes only use 371-379 DXF group codes in their
representation, because AutoCAD and AutoLISP both always assume a 370 group code is the entity's
lineweight. This allows 370 to behave like other "common" entity fields.
380- PlotStyleName type enum (AcDb::PlotStyleNameType). Stored and moved around as a short. Custom
389 non-entity objects may use the full range, but entity classes only use 381-389 DXF group codes in
their representation, for the same reason as the Lineweight range above.
390- String representing handle value of the PlotStyleName object, basically a hard pointer, but has a
399 different range to make backward compatibility easier to deal with. Stored and moved around as an
Object ID (a handle in DXF files) and a special type in AutoLISP. Custom non-entity objects may use
the full range, but entity classes only use 391-399 DXF group codes in their representation, for the
same reason as the Lineweight range above.
400- 16-bit Integers
409
410- String
419
999 DXF: The 999 group code indicates that the line following it is a comment string. SAVEAS does not
include such groups in a DXF output file, but OPEN honors them and ignores the comments. You can
use the 999 group to include comments in a DXF file that you've edited
1000 ASCII string (up to 255 bytes long) in extended data
1001 Registered application name (ASCII string up to 31 bytes long) for extended data
1002 Extended data control string ("{"or "}")

https://www.autodesk.com/techpubs/autocad/acad2000/dxf/group_codes_in_numerical_order_dxf_01.htm 2/3
10/14/2018 Group Codes in Numerical Order [DXF - DXF Reference]

1003 Extended data layer name

1004 Chunk of bytes (up to 127 bytes long) in extended data
1005 Entity handle in extended data; text string of up to 16 hexadecimal digits
1010 A point in extended data
DXF: X value (followed by 1020 and 1030 groups)
APP: 3D point
1020, DXF: Y and Z values of a point
1030
1011 A 3D world space position in extended data
DXF: X value (followed by 1021 and 1031 groups)
APP: 3D point
1021, DXF: Y and Z values of a world space position
1031
1012 A 3D world space displacement in extended data
DXF: X value (followed by 1022 and 1032 groups)
APP: 3D vector
1022, DXF: Y and Z values of a world space displacement
1032
1013 A 3D world space direction in extended data.
DXF: X value (followed by 1022 and 1032 groups)
APP: 3D vector
1023, DXF: Y and Z values of a world space direction
1033
1040 Extended data floating-point value
1041 Extended data distance value
1042 Extended data scale factor
1070 Extended data 16-bit signed integer
1071 Extended data 32-bit signed long

https://www.autodesk.com/techpubs/autocad/acad2000/dxf/group_codes_in_numerical_order_dxf_01.htm 3/3