BTH220 Bluetooth Stereo Headset

User Manual

© 2012 Kinivo LLC. All rights reserved.

Kinivo is a trademark of Kinivo LLC. Bluetooth word mark and the Bluetooth logo
are registered trademarks of Bluetooth SIG. All other trade names are registered
trademarks of respective manufacturers. This manual may not be copied in any
media or form without the written consent of Kinivo LLC.

Kinivo Product Support

Online : http://support.kinivo.com
Email : [email protected]
 Table of Contents
Introduction.......................................................................................... 3
Important Safety Instructions............................................................. 3
Headphone Overview - Right Side....................................................... 4
Package Contents.................................................................................. 5
Operation .............................................................................................. 5
1. Turn Unit On/Off....................................................................................................5
2. Charging the Battery............................................................................................5
3. Standby Mode/Idle Feature...............................................................................6
4. Bluetooth Pairing...................................................................................................6
5. To Pair with Windows 7 or Windows 8............................................................6
6. To Pair with Mac OS X...........................................................................................7
7. Button Functions...................................................................................................8
8. Factory Reset...........................................................................................................9
Troubleshooting.................................................................................... 9
1. Unable to pair to smartphone or tablet........................................................9
2. Headphones no longer connect to my device............................................9
3. Headphones work with my smartphone but not my computer.......10
4. Lost or damaged USB cable............................................................................10
5. Error: Driver missing when trying to pair to computer.........................10
6. Error messages when connecting on Mac OS X......................................10
Frequently Asked Questions.............................................................. 11
Headphone Specifications................................................................. 13
Warranty.............................................................................................. 14
Online Support / Contact Us............................................................... 15

2 Kinivo BTH220 Bluetooth Stereo Headset

 Introduction
Read all safety and operation instructions before using the Bluetooth stereo
headphones.
Warning: To reduce the risk of fire or electric shock, do not expose the product
to water or moisture.

Important Safety Instructions

1. Do not expose the BTH220 to liquid, moisture or areas of high humidity.
2. Do not use abrasive cleaners to clean the BTH220 as they may damage the
unit. Always unplug and power off the unit before cleaning.
3. Do not expose the BTH220 to extremely high or low temperatures.
4. Do not attempt to open or modify the BTH220 in any way.
5. Keep the unit away from direct sunlight.
6. Refer to your State’s driving laws to see if they permit using Stereo
Headphones while driving.
7. To avoid electronic interference and/or compatible conflicts, turn off the
BTH220 in any facilities where posted notices instruct you to do so. For
example: Aircraft, Military Base, Hospital or Health Care Facilities.
8. To avoid impairing your hearing in the long-term operation, keep the
playback volume at a moderate level.
9. Keep away from fire, water, and high voltage equipment.
10. Store the headphones in a cool dry place.

Kinivo BTH220 Bluetooth Stereo Headset 3

 11. The BTH220 contains a lithium ion battery. Lithium ion batteries are
flammable and can cause fire if misused or defective.
12. Always dispose of the packaging and unit in accordance with the local
regulations and in a responsible manner.

Headphone Overview - Right Side

VOLUME

1. Multifunction button
2. LED indicator
3. Volume + button
4. Volume - button
5. Charging port
6. Previous song button
SKIP 7. Next song button

For additional information and features for Bluetooth controls, please refer to
the Operation section of this user manual.

4 Kinivo BTH220 Bluetooth Stereo Headset

 Package Contents
BTH220 Stereo Bluetooth Headset
USB Charging Cable
User Manual
Carrying Pouch

Operation

1. Turn Unit On/Off

Press and hold the multifunction button for 4 - 5 seconds until the blue LED
appears to turn the headphones on. Press and hold the multifunction button for
5 - 6 seconds or until the red LED appears to turn the headphones off.

2. Charging the Battery

To charge the BTH220 headphones, connect the USB cable to the BTH220 and
plug the headphones into a USB power source. USB power sources include
computers, laptops, USB hubs, USB AC adapters, and USB car chargers.
When the BTH220 is charging, the red light will be lit. When the battery is fully
charged, the red light will turn off. The charging process can take 2 to 3 hours to
charge the battery completely.
When the BTH220 has a low battery, the red light will blink intermittently and
the headphones will play an audible tone while powered on.

Kinivo BTH220 Bluetooth Stereo Headset 5

 3. Standby Mode/Idle Feature
When the headphones are powered on and are inactive after several minutes
of use, they will automatically enter standby mode. In this state, the BTH220 will
preserve battery power. To wake the device, simple play audio with the device it
is connected to or press any button on the BTH220.

4. Bluetooth Pairing
a. Ensure the headphones are powered off, then enter the pairing mode on
the headphones by pressing and holding the multifunction button for 7 to
10 seconds until the blue and red lights start flashing alternatively (Note -
do not release when you see only the blue light)
b. Follow the operating instruction of your Bluetooth device to start the
pairing process.
For iPad, iPhone, iPod Touch
Navigate to Settings > General > Bluetooth (On), then select the BTH220 to pair
the headphones.
For Android smartphones
Navigate to Settings > Wireless & networks > Bluetooth settings while
Bluetooth is enabled, then select Scan for devices. Select the BTH220 to pair
the headphones.

5. To Pair with Windows 7 or Windows 8

a. Make sure your computer is Bluetooth enabled and supports Bluetooth
stereo (A2DP).

6 Kinivo BTH220 Bluetooth Stereo Headset

 b. After putting the BTH220 headphones in pairing mode, right click the
Bluetooth tray icon then select ‘Add a Device’ from the context menu.
Under Windows 8, type “Add a Bluetooth device”
c. Locate the BTH220 from the devices list and click the Next button.
d. After your computer has loaded the device and the drivers for the
headphones, you should see that the device has successfully connected.
Continue by clicking Close on the Add a device window and closing the
second information window.
e. Right click the Volume control tray icon then select ‘Playback devices’ from
the context menu.
f. Select the Headphones (Bluetooth Hands-free Audio) by left clicking the
device then click ‘Set Default’.
g. Hit OK to close the window. The Kinivo BTH220 headphones should now
play audio from your computer.

6. To Pair with Mac OS X

a. After putting the BTH220 headphones in pairing mode, click the Bluetooth
tray icon then select ‘Set Up Bluetooth Device’ from the drop down menu.
b. Locate the BTH220 from the devices list and click Continue.
c. You should see that the device pairing has successfully completed.
Continue by clicking Quit.
d. To use the headphones as the default audio device, click the Bluetooth tray
icon and hover over the BTH220 option then select ‘Use as Audio Device’.
e. The next time you adjust the volume in the menu bar or play music, the
computer will automatically connect to the headphones.

Kinivo BTH220 Bluetooth Stereo Headset 7

 7. Button Functions

Function Operation
Press and hold multifunction button for 5 to 7
Toggle unit on/off seconds and Blue light will start blinking when on
and red light before off
While the headphones are powered off, press and
Bluetooth pairing
hold multifunction button for 7 to 10 seconds (red
mode
and blue LED blinking alternatively)
Reconnect Bluetooth
Press any button
(in standby mode)

To use this feature your mobile device must

Voice command support the voice dialing function.
Voice dialing
1. Press the multifunction button twice in quick
(Siri for supported succession. You will hear a beep prompt.
iPhones)
2. Give voice command.
Answer call End call Press multifunction button
Redial last number
Press and hold multifunction button for 2 seconds
Refuse incoming call
Switch audio between While in a call, press and hold multifunction
phone and BTH220 button for 2 seconds
Increase volume Press volume + button
Decrease volume Press volume - button
Play music Press multifunction button
Next song Press next song button
Previous song Press previous song button

8 Kinivo BTH220 Bluetooth Stereo Headset

 8. Factory Reset
WARNING: Performing a factory reset on the BTH220 will delete any previous
pairings and will restore the headphones to factory default settings. Only
perform this if you are experiencing any issues with the product.
1. Power off the BTH220 headphones.
2. Press + , – and the multifunction button - all 3 simultaneously for 6 seconds.
The blue LED will blink twice and the headphones will shut off.
When the headphones are powered on after the factory reset, they will
automatically enter pairing mode.

Troubleshooting

1. Unable to pair to smartphone or tablet

Ensure that the headphones are in pairing mode (see Bluetooth Pairing section).
Now open the Bluetooth configuration on your smartphone or tablet and scan
for Bluetooth devices. You should see the BTH220 headphones - proceed to pair
and connect the headphones.

2. Headphones no longer connect to my device

To ensure the BTH220 headphones are in working order, delete all existing
pairings on all devices and perform a factory reset (see Factory Reset section).

Kinivo BTH220 Bluetooth Stereo Headset 9

 3. Headphones work with my smartphone but not my
computer
The headphones need to be supported by the Bluetooth adapter in your
computer. To ensure the Bluetooth adapter for your computer is functioning
correctly, update the drivers to the latest version. In addition, you may need
to verify that your computer’s Bluetooth adapter supports A2DP (Advanced
Audio Distribution Profile), HSP (Headset Profile), HFP (Hands-free Profile), and/
or AVRCP (Audio/Video Remote Control Profile).

4. Lost or damaged USB cable

If you have lost or damaged the included USB cable, you can use any standard
mini-USB cable or mini-USB charger to charge the BTH220 headphones.

5. Error: Driver missing when trying to pair to computer

The Bluetooth adapter for your computer provides the drivers for all Bluetooth
headphones. To ensure the Bluetooth adapter for your computer is functioning
correctly, update the drivers to the latest version. In addition, you may need to
verify that your Bluetooth adapter supports A2DP (Advanced Audio Distribution
Profile), HSP (Headset Profile), HFP (Hands-free Profile), and/or AVRCP (Audio/
Video Remote Control Profile). If you need assistance with locating the drivers
for your computer, you may contact Kinivo Support.

6. Error messages when connecting on Mac OS X

Verify that the BTH220 headphones are powered on. If you are still unable to
connect, restart the computer and remove the BTH220 from the Bluetooth
device list. Try to pair the headphones again.

10 Kinivo BTH220 Bluetooth Stereo Headset

 If at any point you are unable to resolve your issue, please contact Kinivo
Support for assistance.

Frequently Asked Questions

1. What are the BTH220 headphones compatible with?

In general, the BTH220 headphones will work with devices that support the
A2DP (Advanced Audio Distribution Profile), HSP (Headset Profile), HFP (Hands-
free Profile), and AVRCP (Audio/Video Remote Control Profile) Bluetooth profiles.
A list of common devices that support these Bluetooth profiles:
Apple devices – iPhone, iPod, iPad
Bluetooth enabled Mac computers – Mac Pro, iMac, MacBook, MacBook Air,
MacBook Pro, etc.
Bluetooth enabled Windows computers (Windows 8, Windows 7 and Vista)
Tablets – Windows, Apple, Android, Kindle Fire HD
Smartphones – Android, BlackBerry, Windows, Samsung, Droids, HTC, etc.
Sony Playstation 3 (chat audio only)

2. Where can I find Windows drivers for the BTH220

headphones?
The BTH220 headphones do not have any specific drivers. The computer side
drivers are provided by the computer’s Bluetooth adapter (see compatibility
list). If you are experiencing driver issues with the headphones on a computer,
update your computer’s Bluetooth drivers to the latest version. You may also

Kinivo BTH220 Bluetooth Stereo Headset 11

 contact Kinivo support for assistance in locating the right drivers for your
computer.

3. Can I use my phone charger or car charger with the

BTH220 headphones?
Yes, the BTH220 can be charged from any standard USB power source, such as
car chargers, phone chargers, wall chargers, or USB computer ports.

4. How many Bluetooth connections will the BTH220

headphones remember?
The BTH220 will remember up to five previous Bluetooth connections. When
the BTH220 is powered on, it will automatically connect to the last device it was
connected to.

5. Can I use the BTH220 headphones for VoIP or Skype?

Yes, the BTH220 headphones will switch into the Headset Profile (HSP) when
the miniphone is in use.

6. How can I tell when the battery is low?

When the battery is low, the BTH220 will play an audible beeping sound
through the headphones and the LEDs will blink red intermittently.

7. Help! I’m unable to use to the headphones. What

should I do?
Please view the Troubleshooting section. If you are unable to find a solution you
can contact us via email at [email protected].

12 Kinivo BTH220 Bluetooth Stereo Headset

 Headphone Specifications

v2.1+EDR class 2
The latest version of A2DP1.2 and
Bluetooth Specification AVRCP1.0 profiles support
Supports Bluetooth Headset and
Hands free Profile (HFP 1.5)

RF Frequency Range 2.402-2.480 GHz, 2.4G ISM band

Receive Sensitivity of -90 dBm, TX

Radio Performance
Power Max 4 dBm

Frequency Response 20 Hz - 20 kHz

Very high Signal to

95 dB
Noise Ratio (SNR)

Total Harmonic Distortion (THD) 0.1%

5 Button Design MFB, VOL+, VOL-, FWD, BACK

LED Indicator Status Blue, Red

Rechargeable 400mAh Li-Polymer

Power source Battery
Mini-USB charging Port

Charging Input DC 5V & 350mA

Kinivo BTH220 Bluetooth Stereo Headset 13

 Normal Charging Time 2 ~ 3 hours

Operating Temperature 14 °F ~ 131 °F

Storage Temperature -4 °F ~ 176 °F

Talk Time / Music Time Up to 8 hours

Standby Time Up to 150 hours

Warranty
1 Year Limited Hardware Warranty.
Kinivo hereby warrants to the customer of record that this product is in good-
working condition and free from defects in material or workmanship under
normal use for a duration of 1 year after the date of purchase. The product has
been tested to meet the highest quality standards in each testing category. In
the unlikely event that the product proves to be defective, Kinivo will repair or
replace the product free of charge. If replacement is required and if Kinivo then
no longer carries the same product, then Kinivo reserves the right to substitute
the product with a replacement product of like quality and size, suitable for the
intended use.
This warranty is limited to repair or replacement of the mentioned product
only, is non-transferable and does not extend to any product damaged by
misuse, natural disasters or any other circumstances beyond Kinivo’s control.
The warranty does not cover or provide for the reimbursement or payment
of incidental or consequential damage resulting from breach of the limited
warranty described above. Except for the limited warranty described above we
offer no other warranties expressed or implied, and other than limited warranty

14 Kinivo BTH220 Bluetooth Stereo Headset

 expressly contained herein, we hereby disclaim any and all warranties, including
without limitation any implied warranties of merchantability, suitability or
fitness for a particular purpose.
If your product is not functioning or you have any concerns please contact
Kinivo Support before returning the product.

Online Support / Contact Us

Please visit us at support.kinivo.com or www.kinivo.com for support
information, downloads and how-to’s. You may also reach us via email or live
chat (details below).

Kinivo Product Support

Email : [email protected]
Live chat : http://support.kinivo.com

Kinivo BTH220 Bluetooth Stereo Headset 15

1 hardware warranty
year limited

Made in china
Kinivo Product Support
Online : http://support.kinivo.com
Email : [email protected]