Scribd
Upload
91 views3 pages

Humidity Settings

This document provides specifications for a temperature and humidity monitoring device. It measures temperature from -40 to 120 degrees C and humidity from 0 to 100% RH with 0.1 degree and 0.1% precision. It has an integrated sensor, 10A delay output, and dimensions of 65x55x28mm. The document also describes how to set the temperature and humidity thresholds and ranges, and what fault codes mean.

Uploaded by

Hai tham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
91 views3 pages

Humidity Settings

This document provides specifications for a temperature and humidity monitoring device. It measures temperature from -40 to 120 degrees C and humidity from 0 to 100% RH with 0.1 degree and 0.1% precision. It has an integrated sensor, 10A delay output, and dimensions of 65x55x28mm. The document also describes how to set the temperature and humidity thresholds and ranges, and what fault codes mean.

Uploaded by

Hai tham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

power supply :DC 12V

Temperature measurement range:-40~120℃


Humidity range：0~100%RH
Control precision：0.1℃ 0.1%RH
Test probe：Integrated sensor
output:10A delay
Size:65*55*28mm

temperature control:
1. Set the temperature + ：Normal display mode, long press the +
key for 3 seconds, start temperature numerical flashing, press the +
/ - key setting values, wrong operation after 5 seconds, automatically
return to detect temperature display
2. Set the temperature - ：Normal display mode, long press - button
for 3 seconds, stop numerical flashing temperature, press the + / -
key set value
3. Restore the factory Settings :At the same time long press
temperature, and humidity + key for 3 seconds, digital display, 888,
888

Set the start temperature:Long press the + key, start the flashing
temperature, set start temperature by + / - key
set Stop temperature: long press - button, stop flashing temperature,
set stop temperature by + / - key

Humidity Settings
Set to start humidity: long press the + key, start the humidity value flashing,
set by + / - key launch humidity value
Set stop humidity: long press - to stop humidity value, set by + / - key to
stop the humidity value

Fault code: display LLL mean the sensor fault


display HHH mean Test temperature exceed the range of
measurement
Package Included:
1 x XH-M452 DC 12V LED Digital Thermostat Temperature
Humidity Control Thermometer Hygrometer Controller Relay
Module AM2301 Probe
https://books.google.com.tr/books?id=swX9BAAAQBAJ

You might also like