Scribd
Upload
61 views1 page

Analisis Amef

The document discusses two testing instruments: the HT/HB Series Digital Torque Meter, which measures torque for applications like torque screwdrivers and wrenches, and the QC-619T Abrasion Tester, which tests the abrasion resistance of materials by rubbing them with an abrasive grinding wheel under a controlled load and tracking wear over time. Key specifications of both instruments are provided.

Uploaded by

Carlos Matallana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views1 page

Analisis Amef

The document discusses two testing instruments: the HT/HB Series Digital Torque Meter, which measures torque for applications like torque screwdrivers and wrenches, and the QC-619T Abrasion Tester, which tests the abrasion resistance of materials by rubbing them with an abrasive grinding wheel under a controlled load and tracking wear over time. Key specifications of both instruments are provided.

Uploaded by

Carlos Matallana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

M MATERIAL TESTING Torque/Abrasion

HT/HB Series Digital Torque Meter


HT Series Digital Torque Meter is an intellectualized measure
instrument, which is specially designed for testing and
measuring different of torque. HT is main used for kinds
motorized or air screwdriver, torque screwdriver, torque
wrench, torque driver, measure and calibrate torque
testing,and parts fracture test.
It is widely applied in electric industry, machinery industry,
light industry, automobile industry, scientific research and so
on.

HT Series

Specifications:
● High accuracy and resolution
● Peak hold function
● Peak automatic clearance function
● Tolerance limit(up and down limit)
● Automatic power off function
● 3 units available: N.m, kqf.crn , Ibf.in
● Reset acceleration of gravity function
● Full range 150% overload
● Large memory
● Inductive background light
● USB output
HB Series ● Match synchronous analysis software

Model HT/HB-10 HT/HB-20 HT/HB-50 HT/HB-100 HT/HB-200

Capacity 1.0000N.m 2.0000N.m 5.00N.m 10.00N.m 20.0N.m

Resolution 0.0005N.m 0.001N.m 0.002N.m 0.005N.m 0.01N.m

Accuracy ±0.5%

QC-619T, Abrasion Tester

The main function is to use specified Grinding Wheel with


specified Load to rub the surface of specimen, and after a
setup number of timer of abrasive, evaluate the following
conditions of the surface after test, and ratio the
endurance characteristic of abrasion for this material.
● Worn out condition ● The loss of the weight ● The loss of
the physical volume ● The thickness that been worn out,
etc. ● Use NBS standard gum to ratio the endurance
characteristic of abrasion for this material.

Specification:
● Machine Dimension: 33 ×43 ×30cm ● Machine Weight: 30
kg ● Power Supply: 240V 50Hz ● Rotary Speed: 60RPM (Or
to be specified) ● Counter: LCD display, 6Digit
QC-619T (Optional Setting), Auto-Brake ● Load (Weights) : 250g,
500g, 1000g (Free assorting by user) ● Grinding Wheel
specification: (As customer specifies) ● The cleft between
Grinding Wheel and Specimen Plate-Holder: 37 ~ 38mm ● Grinding Wheel: Diameter 2”, thickness 1/2” ● Pitch of Left
and Right Grinding Wheel: 63.5mm ● Specimen size: Ø100mm, center hole: Ø8mm, thickness: 0.5~3mm (Adjustable),
available for soft/hard material ● Accessories: Vacuum cleaner 1Set, Specimen cutter 1Pc (A), Wrench 1Pc (K), Grind
Wheel 1Set (B), Sand Paper 5Pcs (C) ● Attachment: Warranty Certificate, Instruction Manual each one piece.
406 MRC.11.14

You might also like