Scribd
Upload
332 views2 pages

Instructions For Upgrade Le265x - Le660x

This document provides instructions for updating the software on Sharp LCD television models LC32LE265X, LC40LE265X, LC60LE660X, and LC70LE660X using a USB drive. The update is needed to resolve issues receiving all Freeview channels in some New Zealand regional centers. The 11 step process includes turning on the TV, selecting the country and language, inserting the USB drive, accessing the system update menu, selecting to transfer data from the USB, waiting for the update to complete, and then rescanning for channels if needed.

Uploaded by

Yanto Sae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
332 views2 pages

Instructions For Upgrade Le265x - Le660x

This document provides instructions for updating the software on Sharp LCD television models LC32LE265X, LC40LE265X, LC60LE660X, and LC70LE660X using a USB drive. The update is needed to resolve issues receiving all Freeview channels in some New Zealand regional centers. The 11 step process includes turning on the TV, selecting the country and language, inserting the USB drive, accessing the system update menu, selecting to transfer data from the USB, waiting for the update to complete, and then rescanning for channels if needed.

Uploaded by

Yanto Sae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Software Update for Sharp Models LC32LE265X, LC40LE265X,

LC60LE660X and LC70LE660X


In some New Zealand regional centres you may experience an issue where not all of the Freeview
channels are being received. If this occurs, please use the provided USB and follow the
instructions below to update your Television software.

If you experience difficulties please contact Sharp Customer Care on 0800 501 201 or email
[email protected]

1. Ensure the TV Antenna is connected and the


unit is plugged into the wall socket and the
wall switch is on.

Press the POWER button located on the Left


rear of the TV to turn the TV on.
If this is the first time the TV has been turned
on the Auto installation wizard will appear.
If the TV has previously run the “Auto
Installation” Please go to step 3

2. Using the left, right, up and down arrow


buttons on the remote:

 Press ▼ or ▲ to highlight NEW


ZEALAND, and then press ENTER.
 Press ▼ or ▲ to highlight the desired
language, and then press ENTER.
 Press ▼ or ▲ to select HOME, and
then press ENTER.

Auto search will be started to Auto Tune the


TV which takes about 5 minutes to complete.

3. Check that you have the correct model


written on the USB memory stick.

Insert the supplied USB memory stick in slot


(2) at the left rear of the TV

4. Enter the menu by pressing “MENU” button


on the remote:

Please Turn Page Over


5. Press ◄or ► button on the remote control to
select the “Option” menu

6. Repeatedly press the ▼ down arrow button


on the remote control, scroll all the way down
to the hidden section until “SYSTEM DATA”
is highlighted, and then press the “ENTER”
button on the remote

7. Press “ENTER” on the remote control to


select “USB DATA TRANS”

8. Press ▲arrow up button on the remote


control to highlight “YES” then press
“ENTER”

9. The update will start automatically, progress


is shown on screen.

10. The TV picture will reappear once the update


is complete.

If the picture does not appear after 3 minutes


turn the wall socket off then on and power on
the TV.

11. If some channels are missing, please select


Auto Installation from the “Programme
Setup” Menu (and press “Enter”) .Now that
the software update has been performed,
any missing channels should be located after
the auto tuning scan has finished.

You might also like