Scribd
Upload
151 views

Microcontrollers For Embedded Systems Nec022r

This document contains an exam for a theory course on microcontrollers for embedded systems, with sections on definitions and explanations of microcontroller concepts, questions requiring descriptions of microcontroller features and programming, and longer questions involving microcontroller programming and communication protocols. Students are asked to define instructions, address modes, and peripherals for 8051 and MSP430 microcontrollers; explain concepts like DMA transfer modes, data acquisition, and serial interfaces; and provide programs and diagrams related to tasks like LED control, PWM, and I2C communication.

Uploaded by

Sudhir Goswami
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
151 views

Microcontrollers For Embedded Systems Nec022r

This document contains an exam for a theory course on microcontrollers for embedded systems, with sections on definitions and explanations of microcontroller concepts, questions requiring descriptions of microcontroller features and programming, and longer questions involving microcontroller programming and communication protocols. Students are asked to define instructions, address modes, and peripherals for 8051 and MSP430 microcontrollers; explain concepts like DMA transfer modes, data acquisition, and serial interfaces; and provide programs and diagrams related to tasks like LED control, PWM, and I2C communication.

Uploaded by

Sudhir Goswami
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Printed Pages : 1 Roll No.

NEC022R
B.TECH.
THEORY EXAMINATION (SEM–VI) 2016-17
MICROCONTROLLERS FOR EMBEDDED SYSTEMS
Time : 3 Hours Max. Marks : 100
Note : Be precise in your answer. In case of numerical problem assume data wherever not provided.

SECTION – A
1. Explain the following: 10 x 2 = 20
(a) Define the use of MOVX and MOVC instruction in 8051 Microcontroller.
(b) Define bit addressable RAM in 8051 Microcontroller.
(c) Define Pullup/Pulldown resistor concept in MSP430 Microcontroller.
(d) Compare 8051 and MSP430x5xxx main features.
(e) What are the various transfer modes in DMA controller of MSP430.
(f) Define how data acquisition is done.
(g) Write down any four GPIO registers.
(h) Define functionality of WDTPW and WDTNMI.
(i) What are the various serial communication interfaces available in MSP430
Microcontroller.
(j) Enlist the features of ADC10 of MSP430 Microcontroller.

SECTION – B
2. Attempt any five of the following questions: 5 x 10 = 50
(a) Write down the differences in Memory mapped peripherals and Input output mapped
Peripherals.
(b) What are the various addressing modes in 8051 .
(c) Explain the block diagram of RTC (Real Time clock) with its modes of operation.
What are the applications of RTC.
(d) Explain the working of PWM (Pulse width modulation ) with its block diagram.
(e) Write a program using MSP430x5xx to toggle two LED connected at port P1.5 and
P1.7. Use a pull down switch connected at port P1.2 for toggling these LED.
(f) Write a program to vary the intensity of LED connected at port P1.2 using PWM
method.
(g) Explain the flow chart of receiving single byte from slave having address 0*32H using
USCI_Bx.
(h) What do you mean by ZigBee wireless module ? Explain ZigBee device block diagram.

SECTION – C
Attempt any two of the following questions: 2 x 15 = 30
3 (i) Write an assembly language code to send command to LCD display from 8051
to display any string.
(ii) Explain the working of maskable interrupt in MSP430.
4 (i) Explain the Data frame format in I2C communication
(ii) What are the various GPIO resistors in MSP430x5xx ? Explain each resistors
briefly.
5 (i) What do mean by Near Field Communication (NFC) ? Explain different modes
of NFC device.
(ii) What are the different transfer mode in the DMA? Explain in brief.

You might also like