Scribd
Upload
607 views2 pages

Industrial Oil Testing Standards

This document provides test results and specifications for a hydraulic oil. It includes 16 test parameters such as kinematic viscosity, flash point, pour point, and corrosion protection. For each parameter, it lists the test method, acceptable value or range, and unit of measurement. Based on the results, the oil meets specifications for hydraulic fluids with properties like oxidation resistance, cleanliness level, and protection against corrosion.

Uploaded by

SumitBhaumik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
607 views2 pages

Industrial Oil Testing Standards

This document provides test results and specifications for a hydraulic oil. It includes 16 test parameters such as kinematic viscosity, flash point, pour point, and corrosion protection. For each parameter, it lists the test method, acceptable value or range, and unit of measurement. Based on the results, the oil meets specifications for hydraulic fluids with properties like oxidation resistance, cleanliness level, and protection against corrosion.

Uploaded by

SumitBhaumik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SLNO PROPERTY TEST METHOD VALUE UNIT

DIN/ ISO ASTM Range


1 Kinematic Viscosity at 40º C , ISO DIN 51 562-1 ASTM D 445 41.4 -50.6 mm²/S
VG 46
2 Air release at 50º C DIN 51 381 ASTM D 3427 <4 min
3 Neutralization Number
a)   Oil with out EP/AW additives ASTM D 974 < 0.2 mg KOH/g
b)   Oil with EP/AW additives DIN 51 558 -1 < 0.3 mg KOH/g
4 Water content DIN 51 777-1 ASTM D 1744 < 100 mg /Kg
5 Foaming at 25ºC
Tendency ISO 6247 ASTM D 892 < 400 ml
Stability (seq.1) (seq.1) < 450 s
6 Water Separability DIN 51 589-1 - < 300 s
7 Demulsibility DIN 51 599 ASTM D 1401 < 20 min
8 Density at 15ºC DIN 51 757 ASTM D 1298 < 900 Kg/m3
9 Flash Point, ISO VG 46 DIN ISO 2592 ASTM D92 > 185 ºC
10 Pour point ISO 3016 ASTM D 97 < -6 ºC
11 Cleanliness level Test : ISO 5884 - < 17/14 -
Result : ISO 4406

12 Colour DIN ISO 2049 ASTM D 1500 < 2 -


13 Corrosion effect to copper DIN EN ISO 2160 ASTM D 130 < 2-100 A3 -
14 Corrosion Protection against Steel DIN 51585 ASTM D 665 0-B (DIN )
pass (ASTM)
15 Ageing Characteristics : increase of DIN 51 587 ASTM D 943 < 2.0 mg KOH/g
neutralization number after 2500 h
16 Rotating Pressure Vessels  DIN 943 ASTM D2272  > 225 min
Oxidation Test - Rpvot
17 Base oil > Group 2 or more
18 Sulfur contain ppm
Hindustan Petroleum Corporation Ltd.
VALUE Unit
41.4-50.6 mm²/S

5 MAX min

mg KOH/g
< 0.15 mg KOH/g
< 100 mg /Kg

100 ML MAX ml
NIL IN 300 SEC s
s
< 20 min
< 900 Kg/m3
>206 ºC
MAX -0.9 ºC
NAS 5,6, 7 . AS PER -
CUSTOMER REQUIREMENT

2 MAX -
1 -
(DIN )
PASS (ASTM)
2 MAX mg KOH/g

>>300 min

GROUP 2
LESS THAN 300 PPM ppm

You might also like