Scribd
Upload
102 views

HL04 Non-Incendive Barrier Terminal Block

This document provides information on a non-incendive barrier terminal block. The terminal block allows circuits to be designated as non-incendive, allowing the use of non-explosion proof devices and wiring in hazardous locations. It is rated for Class 1 Division 2 Groups A, B, C, and D hazardous locations up to 160°C. The terminal block is compact at 12mm wide, mounts on DIN rails, and is certified by CSA.

Uploaded by

lin2m3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views

HL04 Non-Incendive Barrier Terminal Block

This document provides information on a non-incendive barrier terminal block. The terminal block allows circuits to be designated as non-incendive, allowing the use of non-explosion proof devices and wiring in hazardous locations. It is rated for Class 1 Division 2 Groups A, B, C, and D hazardous locations up to 160°C. The terminal block is compact at 12mm wide, mounts on DIN rails, and is certified by CSA.

Uploaded by

lin2m3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Datasheet

Non-Incendive Barrier

Te r m i n a l B l o c k

This terminal block allows circuits to be desig-


nated “Non-Incendive”. A typical application
would involve 24Vdc PLC input signals. By rating
the signal as non-incendive, non-explosion proof
devices and wiring can be used in Class 1,
Division 2, Groups A, B, C and D hazardous
locations. The temperature rating is T3C (160°C).

Standard installation and wiring practices apply


such as installation in an approved enclosure.

Features:
• combifoot mounting for 32mm and 35mm
DIN rails
• only 12mm wide
• clear marking of terminals for easy installation
• CSA certified for Class 1, Division 2, Groups
A, B, C and D, T3C (160°C)

United States Canada Mexico


Weidmuller Inc. Weidmuller Ltd. Weidmuller, S.A. de C.V.
821 Southlake Blvd. 10 Spy Court 5 Sur No. 4311
Richmond, Virginia 23236 Markham, Ontario L3R 5H6 Col. Huexotitla
Telephone: (800) 849-9343 Telephone: (800) 268-4080 72534 Puebla, Pue. Mexico
Facsimile: (804) 379-2593 Facsimile: (905) 475-2798 Telephone: (22) 37 2549
Email: [email protected] Email: [email protected] Facsimile: (22) 43 1981
Website: www.weidmuller.com Website: www.weidmuller.ca Email: [email protected]

5/1
Non-Incendive Barrier Terminal Block

Rated data
Rated voltage 24Vdc nominal
35Vdc maximum

Rated current 75mA maximum

Resistance 470M ±1%

Wire Size 22-12AWG

Dimensions width 12mm


length 88.4mm
height on TS32 x 15 rail 75.0mm
height on TS35 x 7.5 rail 71.5mm
height on TS35 x 15 rail 78.5mm

Approvals CSA for Class 1, Division 2, Groups A, B, C and D, T3C (160°C)

Ordering Data Cat.No.


Non-Incendive Barrier TS35 W / TS 32/Y 991629 0000

2 Subject to technical changes · Printed in Canada · 99990139 · 01/2002

5/2

You might also like