Wire Rope

WIRE ROPE LP

Wire Rope 1
“GOLD STRAND”

IWRC
EIPS
NOMINAL STRENGTHS OF WIRE ROPE
6 x 19 Classification/Bright (Uncoated), or Drawn- 6 x 19 Classification/Bright (Uncoated), or Drawn-
Galvanized, Fiber Core, EIPS Galvanized, IWRC, EIPS

Nom. Diam. Nominal Strength Approx. Mass Nom. Diam. Nominal Strength Approx. Mass

EIPS EIPS
Inches Lb/Ft Inches Lb/Ft
Tons Tons
14 3.02 0.11 14 3.40 0.12
516 4.69 0.16 516 5.27 0.18
38 6.72 0.24 38 7.55 0.26
716 9.10 0.32 716 10.2 0.35
12 11.8 0.42 12 13.3 0.46
916 14.9 0.53 916 16.8 0.59
58 18.3 0.66 58 20.6 0.72
34 26.2 0.95 34 29.4 1.04
78 35.4 1.29 78 39.8 1.42
1 46.0 1.68 1 51.7 1.85
1 18 57.8 2.13 1 18 65.0 2.34
1 14 71.1 2.63 1 14 79.9 2.89
1 38 85.5 3.18 1 38 96.0 3.50
1 12 101 3.78 1 12 114 4.16
1 58 118 4.44 1 58 132 4.88
1 34 137 5.15 1 34 153 5.67
1 78 156 5.91 1 78 174 6.50
2 176 6.72 2 198 7.39
2 1/8 197 7.59 2 18 221 8.35
2 1/4 220 8.51 2 14 247 9.36
2 38 274 10.4
2 12 302 11.6
2 58 331 12.8
2 3/4 361 14.0

(Meets or exceeds federal specification RR-W-410 [latest revision].)

A DIVISION OF

All data subject to change without notice.

www.swwrinc.com 5
 WIRE ROPE LP

1
Wire Rope
“GOLD STRAND”

IWRC IWRC

NOMINAL STRENGTHS OF WIRE ROPE

6 x 36 Classification/Bright (Uncoated), or Drawn- 6 x 36 Classification/Bright (Uncoated), or Drawn-
Galvanized, Fiber Core, EIPS Galvanized, IWRC, EIPS

Nom. Diam. Nominal Strength Approx. Mass Nom. Diam. Nominal Strength Approx. Mass

EIPS Inches EIPS Lb/Ft

Inches Lb/Ft
Tons Tons
14 3.02 0.11 14 3.40 0.12
516 5.27 0.18
516 4.69 0.16
38 7.55 0.26
38 6.72 0.24
716 10.2 0.35
716 9.10 0.32
12 13.3 0.46
12 11.8 0.42 916 16.8 0.59
916 14.9 0.53 58 20.6 0.72
58 18.3 0.66 34 29.4 1.04
34 26.2 0.95 78 39.8 1.42
78 35.4 1.29 1 51.7 1.85
1 46.0 1.68 1 18 65.0 2.34
1 18 57.8 2.13 1 14 79.9 2.89
1 14 71.1 2.63 1 38 96.0 3.50
1 38 85.5 3.18 1 12 114 4.16
101 1 58 132 4.88
1 12 3.78
1 34 153 5.67
1 58 118 4.44
1 78 174 6.50
1 34 137 5.15
2 198 7.39
1 78 156 5.91 2 18 221 8.35
2 176 6.72 2 14 247 9.36
2 1/8 197 7.59 2 38 274 10.4
2 1/4 220 8.51 2 12 302 11.6
2 58 331 12.8
2 34 361 14.0
Meets or exceeds federal specification RR-W-410 (latest revision). 2 78 392 15.3
3 425 16.6
3 18 458 18.0
3 14 492 19.5
3 38 529 21.0
3 12 564 22.7
3 5/8 602 24.3
3 3/4 641 26.0

A DIVISION OF

All data subject to change without notice.

6 www.swwrinc.com
 WIRE ROPE LP

Wire Rope 1
LARGE DIAMETER, HIGH STRENGTH
“GOLD STRAND” 6 X 36
WARRINGTON-SEALE

Specifications per API 9A

6 x 36 Classification Wire Rope Bright (Uncoated) or Drawn-Galvanized Wire, Independent Wire Rope Core (IWRC)

Nominal Diameter Approximate Minimum

Rope Diameter Range Length Mass Breaking Force

mm (in) min mm max. mm kg/100 m (lb/ft) kN (short tons)

63,5 (2 1/2) 63,5 66,7 1,730 (11.6) 2,950 (332)
66,7 (2 5/8) 66,7 70,0 1,910 (12.8) 3,240 (364)
69,9 (2 3/4) 69,9 73,4 2,080 (14.0) 3,530 (397)

73,0 (2 7/8) 73,0 76,7 2,280 (15.3) 3,840 (432)

76,2 (3) 76,2 80,0 2,470 (16.6) 4,160 (468)
79,4 (3 1/8) 79,4 83,4 2,680 (18.0) 4,490 (505)

82,6 (3 1/4) 82,6 86,7 2,900 (19.5) 4,830 (543)

85,7 (3 3/8) 85,7 90,0 3,130 (21.0) 5,180 (582)
88,9 (3 1/2) 88,9 93,3 3,380 (22.7) 5,520 (621)

95,3 (3 3/4) 95,3 100 3,870 (26.0) 6,270 (705)

102 (4) 102 107 4,400 (44.0) 6,340 (713)
108 (4 1/4) 108 113 4,960 (49.6) 7,110 (799)

114 (4 1/2) 114 120 5,570 (55.7) 7,900 (888)

121 (4 3/4) 121 127 6,200 (62.1) 8,730 (981)
127 (5) 127 133 6,870 (68.8) 9,590 (1,078)

133 (5 1/4) 133 140 7,410 (49.8) 9,960 (1,120)

140 (5 1/2) 140 147 8,110 (54.5) 10,800 (1,219)
146 (5 3/4) 146 153 8,870 (59.6) 11,700 (1,320)

152 (6) 152 160 9,680 (65.0) 12,700 (1,426)

EEEIPS & HIGHER GRADES - AVAILABLE ON SPECIAL ORDER.

A DIVISION OF

All data subject to change without notice.

www.swwrinc.com 7
 WIRE ROPE LP

1
Wire Rope
ROTATION RESISTANT TYPES

19 X 7 CLASS 8 X 19 CLASS

19 x 7 Classification/Bright (Uncoated) or 8 x 19 Classification/Bright (Uncoated), or

Drawn-Galvanized Wire Strand Core Drawn-Galvanized, IWRC (EIPS)

Nominal Nominal Approx. Nominal Nominal Approx.

Diam. Strength Mass Diam. Strength Mass
(In.) Tons Lb/Ft (In.) Tons Lb/Ft
14 2.77 0.113 12 11.6 .47
516 4.30 0.175 916 14.7 .60
38 6.15 0.25 58 18.1 .73
716 8.33 0.35 34 25.9 1.06
12 10.80 0.45
78 35.0 1.44
916 13.60 0.58
1 45.5 1.88
58 16.80 0.71
34 24.00 1.02
78 32.50 1.39
1 42.20 1.82
1 18 53.10 2.30
1 14 65.10 2.84

Meets or exceeds applicable API-9A and federal specification RR-W-410 (latest revision).

A DIVISION OF

All data subject to change without notice.

8 www.swwrinc.com
 WIRE ROPE LP

Wire Rope 1
COMPACTED STRAND

6 x 26 WIRE ROPE 19 X 19 & 18 X 19

Rotation Resistant
 Mining, industrial, construction, logging, and oilfield  As single-part hoist lines and wherever spooling
applications. problems, drum crushing, bird caging, block twisting and
 Stability, strength, fatigue resistance, and abrasion fast line speeds are likely to be encountered.
resistance.  At the design and specification stage, ideal when
 All popular sizes. machinery space and weight savings are important.
 Longer service life.  Greater fatigue resistance cuts rope expense in
applications where fatigue is the primary cause for
removal.
Extra value means different things in different applications.  Ideally suited to rugged applications.
In applications where increased strength, stability, and
abrasion resistance are beneficial. 6-strand compacted ropes This rotation resistant, higher strength rope provides extra
are a natural and can result in longer service life. From boom value in both original equipment designs and replacement
hoist ropes and drag ropes in mining applications, to applications. 18 and 19 strand compacted wire rope,
sawmill carriage ropes and mainline ropes in logging, their provides higher strength in a smaller diameter, and
versatility and extra value make a difference. resistance to drum crushing.

6 Strand **19 X 19 and 18 X 19

Compacted Compacted Strand
Nominal Bright Rotation Resistant
Diameter Minimum Minimum
In. Approx. Mass Approx. Mass
Breaking Breaking (LB/FT)
(LB/FT)
Load Load
38 8.30 .31 8.30 .31
716 11.2 .39 11.2 .40
12 14.6 .49 14.6 .54
916 18.5 .63 18.5 .69
58 22.7 .78 22.7 .85
34 32.4 1.13 32.4 1.25
78 43.8 1.54 43.8 1.68
1 56.9 2.00 56.9 2.17
1 18 71.5 2.54 71.5 2.75
1 14 87.9 3.14 87.9 3.45
1 38 106 3.80 106 4.33
1 12 125 4.50 125 5.11

Breaking loads listed are the minimum established by the Wire Rope ** The given strengths for 19 strand rotation resistant wire ropes are
Technical Board. Verify the breaking load when inquiring as actual applicable only when a test is conduced on a new rope fixed at both
inventories may have different breaking loads. ends. When the rope is in use and one end is free to rotate, the
nominal strength is reduced.

Not recommeded for use with swivels.

A DIVISION OF

All data subject to change without notice.

www.swwrinc.com 9
 WIRE ROPE LP

1
Metric Crane Ropes

* Also available in imperial diameters

* Rotation Resistant
* Can be used with in-line Swivels
* 2160 Grade Tensile
* Drawn Galvanized available, for
added corrosion protection.
* Compacted Strand. Compacted Strand
35 X 7 Class
2160 GRADE

Nominal Estimated
Mass
Diameter Break Strength
(Lbs/Ft)
mm-1/+4% (Lbs)
10 0.312 21,430
12 0.450 30,780
13 0.538 36,180
14 0.622 43 820
15 0.712 50,300
16 0.800 57,300
17 0.907 64,720
18 1.011 72,580
19 1.136 80,900
20 1.297 89,440
21 1.431 98 650
22 1.556 108,310
23 1.699 118,430
24 1.848 128,990
25 2.009 132,140
25.4 2.100 136,000
26 2.157 142,700
28 2.553 165,620
29 2.688 177,530
30 2.923 183,370
32 3.313 208,540
34 3.736 236,000
36 4.193 263,000
Estimated breaking strength shown. Call for available diameters & breaking strengths.

A DIVISION OF

All data is subject to change without notice.

10 www.swwrinc.com
 WIRE ROPE LP

Galvanized and Stainless Steel Cables 1

GALVANIZED
Diameter Breaking Approx. Weight
Construction
in Inches Strength (lbs) per Foot (lbs)
116 7x7 480 .0075
332 7x7 920 .016
18 7x7 1,700 .028
18 7x19 2,000 .029
532 7x7 2,600 .043
532 7x19 2,800 .045
316 7x7 3,700 .062
7X7 316 7x19 4,200 .065
732 7x19 5,600 .086
14 7x7 6,100 .106
14 7x19 7,000 .11
516 7x19 9,800 .173
38 7x19 14,400 .243

STAINLESS STEEL (T304)

Diameter Breaking Approx. Weight

Construction
in Inches Strength (lbs) per Foot (lbs)
116 7x7 480 .075
332 7x7 920 .016
18 7x7 1,760 .028
18 7x19 1,760 .029
3/16 7x7 3,700 .062
3/16 7x19 3,700 .065
1/4 7x19 6,400 .11
5/16 7x19 9,000 .173
3/8 7x19 12,000 .243
7 X 19

STAINLESS STEEL (T316)

Diameter Breaking Approx. Weight

Construction
in Inches Strength (lbs) per Foot (lbs)
116 7x7 480 .0075
1/8 7x19 1,670 .029
3/16 7x19 3,565 .065
1/4 7x19 5,875 .11
5/16 7x19 8,825 .173
3/8 7x19 11,760 .243
Meets or exceeds applicable federal specification RR-W-410 (latest revision).
Uncoated cable meets dimensional and strength requirements of
MIL-W-83420, aircraft cable.
Cables in strict compliance with MIL-W-83420 available upon request.
A DIVISION OF

All data subject to change without notice.

www.swwrinc.com 11
 WIRE ROPE LP

1
GALVANIZED STEEL STRAND - 1 X 7
ASTM A475, CLASS A COATING,
LEFT REGULAR LAY, EXTRA HIGH STRENGTH**

Diameter Nominal Breaking Approx. Weight

Inches Strength (Tons) Per Foot (lbs)
316 1.99 .073
14 3.32 .120
516 5.60 .225
38 7.70 .273
716 10.70 .399
1x7 Strand 12 13.45 .517
916 19.50 .637
58 21.20 .796

AVAILABLE IN DOMESTIC OR IMPORTED

**OTHER GRADES ALSO AVAILABLE

GALVANIZED STEEL STRAND - 1 X 19

ASTM A475, CLASS A COATING,
LEFT REGULAR LAY, EXTRA HIGH STRENGTH

Diameter Nominal Breaking Approx. Weight

Inches Strength (Tons) Per Foot (lbs)
34 29.15 1.16
78 39.85 1.58
1x19 Strand 1 52.25 2.07
AVAILABLE IN DOMESTIC OR IMPORTED
ASTM A586 & A603 ALSO AVAILABLE
STAINLESS STEEL STRAND ALSO AVAILABLE

A DIVISION OF

All data subject to change without notice.

12 www.swwrinc.com
 WIRE ROPE LP

Galvanized and Stainless Steel 1

Coated Cables
GALVANIZED, CLEAR VINYL COATED - 7 X 7 & 7 X 19
Coated Weight Breaking
Diameter
To per foot Strength Construction
(In)
(In) (lbs) (lbs)
116 332 .0093 480 7x7
116 18 .012 480 7x7
332 18 .018 920 7x7
332 316 .026 920 7x7
18 316 .035 1,700 7x7
332 18 .019 1,000 7x19
18 316 .036 2,000 7x19
316 14 .077 4,200 7X19
316 516 .08 4,200 7X19 7X7
14 516 .12 7,000 7X19
516 38 .20 9,800 7X19
38 716 .27 14,400 7X19

TYPE 304 STAINLESS STEEL, VINYL COATED - 7 X 19

Coated Weight Breaking
Diameter
To per foot Strength Construction
(In)
(In) (lbs) (lbs)
18 316 .036 1,760 7x19
316 14 .077 3,700 7x19
14 516 .128 6,400 7x19
516 38 .20 9,000 7x19
38 716 .27 12,000 7x19
7 X 19
OTHER FINISHED DIAMETERS ALSO AVAILABLE
AVAILABLE IN CLEAR AND COLOR COATINGS
MEETS OR EXCEEDS FEDERAL SPECIFICATION RR-W-410 (latest revision)

A DIVISION OF

All data subjec to change without notice.

www.swwrinc.com 13