Scribd
Upload
237 views2 pages

LTW90 1 000 1 500

This document provides specifications for the LTW90 1.000/1.500 kW wind turbine. It has a hub height of 80-97.5 meters, rated power of 1,000-1,500 kW, and rotor diameter of 90.3 meters. The turbine uses active pitch control and can operate in wind speeds from 3-25 m/s. It utilizes a permanent magnet direct drive generator and power electronic converter rated for 690V and 50-60Hz.

Uploaded by

Electricidad Ingecables
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
237 views2 pages

LTW90 1 000 1 500

This document provides specifications for the LTW90 1.000/1.500 kW wind turbine. It has a hub height of 80-97.5 meters, rated power of 1,000-1,500 kW, and rotor diameter of 90.3 meters. The turbine uses active pitch control and can operate in wind speeds from 3-25 m/s. It utilizes a permanent magnet direct drive generator and power electronic converter rated for 690V and 50-60Hz.

Uploaded by

Electricidad Ingecables
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1.000 kW / 1.

500 kW
LTW90 1.000 / 1.500 kW

DESIGN DATA CONTROL & SAFETY SYSTEM


Hub height 80 m / 97,5 m Aerodynamic, indipendent pitch
Main brake
Rated power 1.000 / 1.500 kW control
Tower Steel Service brake Electric / Hydraulic
Cut-in wind speed 3 m/s Rotor lock Hydraulic
Cut-out wind speed 25 m/s Remote control Leitwind - SCADA
Yaw control system Active, electrical
Wind class IIIA POWER ELECTRONIC
Converter type 4Q full power - 3 phase IGBT
ROTOR
Converter rated voltage and
Number of blades 3 690 V ±10%, 50-60 Hz ±5%
frequency (grid-side)
Rotor diameter 90,3 m
0,95 ind - 1 - 0,95 cap
Swept area 6.404 m2 for reactive power compensation
Converter power factor (grid-side)
Rotational speed 15 rpm control, grid voltage control
capability
Tip speed 71 m/s
Blade material GFRP-EP Air cooled rotor and water cooled
Cooling
stator
Power and rotor speed control Active pitch control
High quality output power in
GENERATOR accordance with major grid code
Permanent Magnet Direct Drive requirements. Integration into
Type various grid systems worldwide.
Synchronous Machine
In compliance with:
Modular coils with tooth Power quality and Grid codes
Stator Winding -- Grid codes CEI 0-16, TERNA,
concentrated winding, exchangeable e-on (incl. LVRT)
Modular Permanent Magnets with -- Power quality measurements
Rotor Topology
flux concentration, exchangeable according to IEC 61400-21
Speed Range Variable Low Speed Machine -- Emission limits IEC 61800-3
Protection class IP55 Single or multiple converter /
Arrangement
multiple converter

Power curve
1.600
Wind speed Electrical power
(m/s) (kW)
1.400
3,0 39 39
4,0 107 107
1.200 5,0 216 216
6,0 379 379

1.000 7,0 602 602


8,0 869 888
9,0 1.000 1.221
800
10,0 1.000 1.431
11,0 1.000 1.500
600
12,0 1.000 1.500
13,0 1.000 1.500
400 14,0 1.000 1.500
Electrical power (kW)

15,0 1.000 1.500

200 16,0 1.000 1.500


17,0 1.000 1.500
18,0 - 25,0 1.000 1.500
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Wind speed (m/s) 1.000 kW 1.500 kW

Information, specifications and/or pictures subject to change without notice.

www.leitwind.com

ITALY
LEITWIND AG / SPA - Brennerstraße 34 / Via Brennero, 34
39049 Sterzing / Vipiteno (BZ) - Italy
Ph: +39 0472 722 111 - E-mail: [email protected]

You might also like