PRODUCT

SUPPORT &
SERVICES
MAINTENANCE
TRAINING
Product catalogue 2018 – Issue 1
 CONTENTS
Product catalogue 2018 – Issue 1

1
CONTENTS
1. OUR TRAINING PHILOSOPHY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4.3 Power Plant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
4.3.1 Engine Run-Up Course. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
2. MAINTENANCE COURSES - TYPE RATING PART 147 . . . . . . . . . . . . . . . . . . 7 4.3.2 Engine Run-up Refresh Course . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
2.1 B1-T1 Technician Mechanical Course . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.3.3 Differences engine Run-Up Course . . . . . . . . . . . . . . . . . . . . . . . . . .37
4.3.4 Boroscope Inspection Course. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
2.2 B1-T1 Additional Avionics Course . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.3.5 ATR 42/72 500/600 Propeller Module (HS 568F) . . . . . . . . . . . . . .39
2.3 B2-T2 Avionics Technician Course . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.3.6 Propeller Blade Line Maintenance Repair Training (568F) . . . . . . .40
2.4 B2-T2 Additional Mechanical Course . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.4 MATRI Maintenance Instructor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
2.5 A-T3 Mechanics Course . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.4.1 MATRI Maintenance Instructor Course . . . . . . . . . . . . . . . . . . . . . . .41
2.6 C-T4 Base Maintenance Certifying Engineer Course . . . . . . . . . . . . . 16 4.4.2 MATRI Maintenance Instructor Refresh Course . . . . . . . . . . . . . . . .42
2.7 B1-T1 AND B2-T2 Maintenance Differences Course. . . . . . . . . . . . . . 17 4.5 Repair and Assessment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
4.5.1 Composite repair Course . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
3. MAINTENANCE COURSES – TYPE RATING NON-PART 147 . . . . . . . . . . . . 19 4.5.2 EWIS Course . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
3.1 LINE & BASE Mechanics Course . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 4.5.3 ATR 42/72 500/600 Non Destructive Testing Module . . . . . . . . . .45

3.2 LINE & BASE All Systems Course . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 4.6 Preventive Maintenance PAMO Course  . . . . . . . . . . . . . . . . . . . . . . . 46

5. ATR MODULAR MAINTENANCE TRAINING COURSES . . . . . . . . . . . . . . . . 47

4. OTHER MAINTENANCE COURSES NON-PART 147 . . . . . . . . . . . . . . . . . . . 25 6. TRAINING EQUIPMENT AND MULTIMEDIA TRAINING TOOLS . . . . . . . . . 49
4.1 Refresh and Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 6.1 General equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4.1.1 Maintenance Refresh Training B1-T1 and B2-T2 Course . . . . . . . . .26 6.2 ATR Training Center simulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
4.1.2 Trouble shooting course – All System . . . . . . . . . . . . . . . . . . . . . . . .27 6.3 CBT (Computer Based Training) ACOS/ACOS²,
4.1.3 Phobos Course – MFC Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 ATR Courseware Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
4.1.4 MPC Advanced course ATR legacy aircraft . . . . . . . . . . . . . . . . . . . .29 6.4 3D Trainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
4.2 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 6.5 Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
4.2.1 ATRN@V ATR Maintenance Documentation . . . . . . . . . . . . . . . . . . .30 6.6 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
4.2.2 Standard Practices Manuals ATR Maintenance Documentation . .31 6.7 ATR Training Center Maintenance Training Tools . . . . . . . . . . . . . . . . . 57
4.2.3 Structure Repair Manual (SRM) Familiarisation Course. . . . . . . . . .32 6.8 Mobile Classroom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
4.2.4 ATR MMEL/CDL Maintenance Course . . . . . . . . . . . . . . . . . . . . . . . .33 7. GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
4.2.5 ATR 42/72 Maintenance Programme
Development Processes (MSG3/MBRB) Course . . . . . . . . . . . . . . . . . . . .34 8. GENERAL TERMS AND CONDITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
2
 1.
OUR TRAINING
PHILOSOPHY
Product catalogue 2018 – Issue 1

3
 G
1. OUR TRAINING
PHILOSOPHY
PHIL

ATR TRAINING CENTER’S TRAINING

1. 2. MAINTENANCE
E

AND FLIGHT OPERATIONS EXPERTISE

COURSES

THAT ONLY AN AIRCRAFT MANUFACTURER CAN PROVIDE

47 RATING NON-PART 147
47
3. MAINTENANCE
COURSES TYPE

With more than 1000 aircraft operating worldwide, ATR has developed a full set of innovative and competitive services
to complement the Operators’ own capabilities. ATR Training Center has been created in 1989 to meet companies’
COURSES NON-PART 147

requirements and provide an innovative and cost effective level of training. Ten years later, ATR Training Center was one
MAINTENANCE

of the first centers to be recognized by the JAA as a Type Rating Training Organization (TRTO) and Maintenance Training
4. OTHER

Organisation and Exposition (MTOE). In 2012, ATR became the first company qualified by EASA as an Approved Training
Organisation (ATO) under FR.ATO.0001 certificate. In 2017, more than 3,500 trainees attended our courses.
EQUIPMENT
3. TRAINING

Located in Toulouse Blagnac, ATR headquarters ben- around the world, ATR Training Center ensures availa- by updating contents via all ATR instructors and revis-
efit from the proximity of some of the major aeronau- bility of its training for all customers. On the one hand, ing the supporting training material.
tical companies in the world, such as Airbus. Studying ATR Training Center Toulouse set the rules and stand-
in ATR Training Center in Toulouse is a unique oppor- ards to be applied in all ATR training centers: course Being an aircraft manufacturer allows ATR Training
EQUIPMENT
6. TRAINING

tunity for trainees to visit the ATR Final Assembly Line contents (training syllabi) and training devices configu- Center to provide very high standards in terms of qual-
(FAL), but also to benefit from the expertise of ATR’s ration are standardised worldwide. On the other hand, ity and device availability. High investments have been
engineering and design departments. all ATR Training Centers benefit from state-of-the-art in- made to develop state of the art computer based ap-
stallations and provide a high level of training services plications (ATR Courseware ACOS, Virtual Walkaround,
The ATR Training Center objective is to provide the best with a full set of comprehensive training tools, each one 3D Procedure, desktop trainer…), one of the Pillars of
4. GLOSSARY

standard of training, as well as comprehensive opera- adapted to a specific phase of the learning process. our mobile classrooms, but also provide our trainees
tions support at an affordable price for all ATR opera- with a wide range of training devices (briefing and de-
tors worldwide. In order to best meet your needs, ATR In order to give the best message and quality of tui- briefing stations, Flat Panel Trainer, Full Flight Trainer,
Training Center is designed as a network of training tion to all trainees, ATR Training Center updates both Full Flight Simulator). Associated with top notch In-
centers around the world. By both creating ATR pro- training programmes and tools on a regular basis. structors and high standard classrooms, all our Train-
5. GENERAL TERMS
MS
AND CONDITIONS

prietary training centers and establishing partnerships Moreover standardisation of information is ensured ees get access to a very unique training environment.

4
 1. OUR TRAINING
PHILOSOPHY
2. MAINTENANCE

RATING PART 1477

COURSES TYPE
47 RATING NON-PART 147
47
3. MAINTENANCE
COURSES TYPE
UNIQUE SUITE OF TRAINING EASA APPROVED COURSES We also include a Field Trip in our pilot, maintenance

COURSES NON-PART 147

EQUIPMENT and flight attendant courses. During the Field Trip, the

MAINTENANCE
All our pilot and maintenance training programmes are

4. OTHER
trainees visit the ATR Final Assembly Line, where they
We offer state of the art technical equipment includ- approved by the French DGAC on behalf of the EASA
can locate the systems components in the aircraft.
ing modern classrooms, fully equipped debriefing requirements and automatically valid across all Euro-
stations, Desktop trainers, Computer Based Trainer pean Countries. For customers who are not under the
stations, Flight Deck mock-ups, a Flight Deck evacua- EASA regulations, we provide customised programmes FLIGHT OPERATIONS SUPPORT

5. ATR MODULAR
submitted for approval to each National Aviation Au- The flight operations office is located in the Toulouse

MAINTENANCE
tion mock-up, Virtual Flight Decks, Virtual Procedures

TRAINING
Trainers, Virtual Walkaround, Full Flight Trainers and thority. Training Center, thus taking advantage of its oper-
Full Flight Simulators. ational environment to support the airlines with a
OUR TEACHING CONCEPT wide range of services such as technical assistance,
COURSES TAILORED TO YOUR NEEDS detailed performance studies (take-off and landing
Our training is based on the modern CBT (Competen-
charts, flight plans, route studies, airport studies,
Our catalogue includes a wide range of training for flight cy-Based Training) and TEM (Threat & Error Manage-

EQUIPMENT
QUIPMENT
IPMENT
6. TRAINING
weight & balance studies…), on-site assistance and
crews, cabin crews, maintenance personnel, operations ment) use thorough task analysis, led by our special-
training, customised operational documentation and
engineers and flight dispatchers. We also offer made-to- ists in collaboration with our customers.
ATR Performance Software.
measure courses adapted to your requests in order to As the best way to reinforce acquired theoretical
perfectly suit your requirements. The ATR Training Center knowledge is to put it into practice, we combine the
programmes have been developed to reflect the aircraft need-to-know concept with the “learning by doing”

7. GLOSSARY
characteristics while meeting the needs of its opera- experience in order to enhance maximum retention.

G OSS
tors. Courses are carried out in English or French, or by Moreover, all our courses are designed for quick and
means of a special arrangement in the customer’s own efficient use by the trainees within the airline environ-
language, using an interpreter. As per ICAO standards, ment. Thus, the vocabulary and phraseology used
applicants for our course should be able to read, write in Training and Operations are identical in order to

8. GENERAL TERMS
AND CONDITIONS
and communicate to an understandable level of English. achieve the required standard.

5
 G
1. OUR TRAINING
PHILOSOPHY
PHIL

ATR Toulouse Training Center is the International Reference for Equipment, Programmes, Strategic
1.

orientations and Instructors standardisation. Under its control, the ATR worldwide training policy
2. MAINTENANCE
E

is developing a number of Training Centers around the world.

47 RATING NON-PART 147
47 COURSES
3. MAINTENANCE
COURSES TYPE

PARIS

TOULOUSE
COURSES NON-PART 147

MIAMI
MAINTENANCE
4. OTHER

• Johannesburg Training Center: all ATR

series except -600 FFS
• Miami: 72-600 series FFS SINGAPORE
EQUIPMENT
3. TRAINING

• Paris Training Centre: ATR 72-500,

72-600 series FFS
JOHANNESBURG
• Singapore: 72-600 series FFS
• Toulouse: all ATR series FFS
EQUIPMENT
6. TRAINING
4. GLOSSARY
5. GENERAL TERMS
MS
AND CONDITIONS

6
 2.
MAINTENANCE
COURSES
TYPE RATING
PART 147
Product catalogue 2018 – Issue 1

7
 2. MAINTENANCE COURSES - TYPE RATING PART 147 DURATION

2.1. B1-T1 TECHNICIAN EASA APPROVED 30 DAYS

MECHANICAL COURSE
1. OUR TRAINING
PHILOSOPHY
PH

WHO IS ELIGIBLE? DOCUMENTATION

Personnel required to issue certificates for release to service. • Maintenance Training Notes (MTN)
2. MAINTENANCE

RATING PART 147

COURSES TYPE

PREREQUISITES • Flight Deck Layout Posters and supplementary manuals, as appropriate

1. To have a basic knowledge of aircraft systems • Also available: Maintenance documentation
2. To be certified staff or equivalent (1 year experience in a similar aircraft category
for practical part only).
3. To have good knowledge of the English language
47 RATING NON-PART 147
47
3. MAINTENANCE
COURSES TYPE

OBJECTIVES
• To provide the maintenance engineer with comprehensive and practical
knowledge and understanding of the ATR systems.
• To enable the participant to support the aircraft and to carry out effective
COURSES NON-PART 147

troubleshooting and repairs.

MAINTENANCE
4. OTHER

COURSE OUTLINE
THEORETICAL PART: 20 DAYS
This module runs theoretical descriptions of the ATR electrical and mechanical
systems (level 3) and of the avionics systems (level 2); it takes place in the classroom,
5. ATR MODULAR
MAINTENANCE

using ACOS.
TRAINING

PRACTICAL PART: 10 DAYS

Module 1: Cockpit & Test Operations: 5 days

This sub-module is run on STD (Synthetic Training Device) . It is a computer-based
training tool dedicated to maintenance staff training. Its aim is to apply operational
EQUIPMENT
6. TRAINING

procedures in a 3D virtual environment by interacting with the elements of the

aircraft. It also includes a field trip to the ATR assembly line for systems component
location. It comprises the testing and operations of aircraft systems.

Module 2: Aircraft Maintenance Practice: 5 days

7. GLOSSARY

This module is run on real aircraft. It comprises the most significant maintenance
operation on the mechanical/electrical systems.
8. GENERAL TERMS
AND CONDITIONS

8
 1. OUR TRAINING
PHILOSOPHY
PROGRAMME
ATR 42-200/300 series or ATR 72-100/200 series or ATR 42-400/500/72-212A (-500 or -600)

2. MAINTENANCE

RATING PART 1477

COURSES TYPE
B1/T1 Training Programme. Powered with PWC PW 120 series

WEEK 1 THEORETICAL TRAINING WEEK 4 THEORETICAL TRAINING

DAY 1 DAY 2 DAY 3 DAY 4 DAY 5 DAY 1 6 DAY 1 7 DAY 1 8 DAY 1 9 DAY 2 0

47 RATING NON-PART 147

47
3. MAINTENANCE
Welcome Briefing Briefing Briefing Briefing Briefing Briefing Briefing Briefing Briefing

COURSES TYPE
Course Examination/ Examination/ Examination/
ACOS ACOS ACOS ACOS ACOS ACOS
presentation Debriefing Debriefing Debriefing

ACOS ACOS ACOS ACOS ACOS ACOS ACOS ACOS ACOS ACOS

COURSES NON-PART 147

Examination/ Examination/
Debriefing Debriefing Debriefing Debriefing Debriefing Debriefing Debriefing Debriefing
Debriefing Debriefing

MAINTENANCE
4. OTHER
WEEK 2 THEORETICAL TRAINING WEEK 5 PRACTICAL TRAINING (module 1 - STD Synthetic Training Device)

DAY 6 DAY 7 DAY 8 DAY 9 DAY 1 0 DAY 1 DAY 2 DAY 3 DAY 4 DAY 5

Briefing Briefing Briefing Briefing Briefing Briefing Briefing Briefing Briefing Briefing

5. ATR MODULAR
MAINTENANCE
TRAINING
Examination/ Examination/ Field Trip Field Trip Field Trip Field Trip Field Trip
ACOS ACOS ACOS
Debriefing Debriefing
Synthetic
STD STD STD STD
ACOS ACOS ACOS ACOS ACOS Training Device
Examination/ Debriefing Debriefing Debriefing Debriefing Debriefing
Debriefing Debriefing Debriefing Debriefing
Debriefing

EQUIPMENT
QUIPMENT
IPMENT
6. TRAINING
WEEK 3 THEORETICAL TRAINING WEEK 6 PRACTICAL TRAINING (module 2 - Aircraft)

DAY 1 1 DAY 1 2 DAY 1 3 DAY 1 4 DAY 1 5 DAY 1 DAY 2 DAY 3 DAY 4 DAY 5

Briefing Briefing Briefing Briefing Briefing Briefing Briefing Briefing Briefing Briefing

7. GLOSSARY
Examination/ Examination/ Practical training Practical training Practical training Practical training Practical training

G OSS
ACOS ACOS ACOS
Debriefing Debriefing
Practical training Practical training Practical training Practical training Practical training
ACOS ACOS ACOS ACOS ACOS
Debriefing Debriefing Debriefing Debriefing Debriefing
Examination/

8. GENERAL TERMS
AND CONDITIONS
Debriefing Debriefing Debriefing Debriefing
Debriefing

Contact [email protected] for scheduling 9

 2. MAINTENANCE COURSES - TYPE RATING PART 147 DURATION

2.2 B1-T1 ADDITIONAL EASA APPROVED 6 OR 7

AVIONICS COURSE DAYS
1. OUR TRAINING
PHILOSOPHY
PH

WHO IS ELIGIBLE? PROGRAMME

Maintenance Personnel wishing to get upgraded from category B1 to category B2 Transition Programme course from T1 to T2
2. MAINTENANCE

RATING PART 147

COURSES TYPE

with additional training covering the avionics systems at level III. ATR 42-400/500/72-212A (-500, -600) and ATR 72-100/200 series or ATR 42-
PREREQUISITES 200/300 series
1. To be qualified as B1-T1 performed in ATR Training Center
2. To have good knowledge of the English language
WEEK 1 THEORETICAL /PRACTICAL TRAINING (module 1)
47 RATING NON-PART 147
47
3. MAINTENANCE

OBJECTIVES
COURSES TYPE

T H E O R E T I CA L T H E O R E T I CA L T H E O R E T I CA L P R AT I CA L PA R T P R AT I CA L PA R T
PA R T DAY 1 PA R T DAY 2 PA R T DAY 3 DAY 1 DAY 2
COURSE OUTLINE
The additional training includes the following modules.
Welcome Briefing Briefing Briefing Briefing
THEORETICAL PART: 3 DAYS
COURSES NON-PART 147

This module consists of the theoretical description (level 3) of ATR avionics systems. Examination/
MAINTENANCE

Briefing ACOS Field Trip Field Trip

It takes place in the classroom, using ACOS. Debriefing
4. OTHER

PRACTICAL PART: 4 DAYS FOR -600 AND 3 DAYS FOR OTHER ATR MODELS
ACOS ACOS ACOS STD STD
Module 1: Cockpit Test & Operations: 2 days
This sub-module is run on STD (Synthetic Training Device) . It is a computer-based Examination/
5. ATR MODULAR

Debriefing Debriefing Debriefing Debriefing

MAINTENANCE

training tool dedicated to maintenance staff training. Its aim is to apply operational Debriefing
TRAINING

procedures in a 3D virtual environment by interacting with the elements of the

aircraft. It also includes a field trip to the ATR assembly line for systems component
location. It comprises the testing and operations of aircraft systems. WEEK 2 PRACTICAL TRAINING (module 2)

P R AT I CA L PA R T DAY 3 P R AT I CA L PA R T DAY 4
Module 2: Aircraft Maintenance Practice: 1 or 2 days
EQUIPMENT
6. TRAINING

This sub-module is carried out on real aircraft. It comprises the most significant Briefing Briefing
maintenance operation on the avionics system.
Practical training Practical training
DOCUMENTATION
• Maintenance Training Notes (MTN) Practical training Practical training
7. GLOSSARY

• Flight Deck Layout Posters and supplementary manuals, as appropriate

Debriefing Debriefing
• Also available: Maintenance documentation
8. GENERAL TERMS
AND CONDITIONS

10 Contact [email protected] for scheduling

 Contact [email protected] for scheduling
11

5. ATR MODULAR 4. OTHER 3. MAINTENANCE 2. MAINTENANCE

8. GENERAL TERMS 6. TRAINING 1. OUR TRAINING
7. GLOSSARY MAINTENANCE MAINTENANCE COURSES TYPE COURSES TYPE
AND CONDITIONS EQUIPMENT PHILOSOPHY
TRAINING COURSES NON-PART 147
47 RATING NON-PART 147
47 RATING PART 147
 2. MAINTENANCE COURSES - TYPE RATING PART 147 DURATION

2.3 B2-T2 AVIONICS EASA APPROVED 28 DAYS

TECHNICIAN COURSE
1. OUR TRAINING
PHILOSOPHY
PH

WHO IS ELIGIBLE? DOCUMENTATION

Personnel required to issue certificates for release to service following line and base • Maintenance Training Notes (MTN)
2. MAINTENANCE

RATING PART 147

COURSES TYPE

maintenance on avionics and electric systems. • Flight Deck Layout Posters and supplementary manuals, as appropriate
PREREQUISITES • Also available: Maintenance documentation
1. To have good basic knowledge of aircraft systems
2. To be certified staff or equivalent (with 1 year experience in a similar aircraft
category for practical part only).
47 RATING NON-PART 147
47
3. MAINTENANCE

3. To have good knowledge of the English language

COURSES TYPE

OBJECTIVES
• To provide the maintenance engineer with comprehensive and practical
knowledge and understanding of the ATR electrical and avionics systems.
COURSES NON-PART 147

• To enable the participant to support the aircraft and to carry out effective
MAINTENANCE
4. OTHER

troubleshooting and repairs.

COURSE OUTLINE
THEORETICAL PART: 18 DAYS
This module consists of the theoretical description of ATR electrical and avionics
5. ATR MODULAR
MAINTENANCE

systems (level 3) and of mechanical systems (Level 1). It takes place in the classroom,
TRAINING

using ACOS.
PRACTICAL PART: 10 DAYS

Module 1: Cockpit Test & Operations: 5 days

This sub-module is run on STD (Synthetic Training Device) . It is a computer-based
EQUIPMENT
6. TRAINING

training tool dedicated to maintenance staff training. Its aim is to apply operational
procedures in a 3D virtual environment by interacting with the elements of the
aircraft. It also includes a field trip to the ATR assembly line for systems component
location. It comprises the testing and operations of aircraft systems.
7. GLOSSARY

Module 2: Aircraft Maintenance Practices: 5 days

This sub-module is carried out on real aircraft. It comprises the most significant
maintenance operation on the electrical and avionics systems.
8. GENERAL TERMS
AND CONDITIONS

12 Contact [email protected] for scheduling

 1. OUR TRAINING
PHILOSOPHY
PROGRAMME
All ATR models

2. MAINTENANCE

RATING PART 1477

COURSES TYPE
B2/T2 Training Programme. Powered with PWC PW 120 series
THEORETICAL TRAINING PRACTICAL TRAINING
DAY 1 DAY 2 DAY 3 DAY 4 DAY 5 Module 1 - STD Synthetic Training Device
Welcome Briefing Briefing Briefing Briefing

47 RATING NON-PART 147

47
DAY 1 DAY 2 DAY 3 DAY 4 DAY 5

3. MAINTENANCE
Course

COURSES TYPE
ACOS ACOS ACOS ACOS
presentation Briefing Briefing Briefing Briefing Briefing
ACOS ACOS ACOS ACOS ACOS Field Trip Field Trip Field Trip Field Trip Field Trip
Examination/ Examination/
Debriefing Debriefing Debriefing
Debriefing Debriefing STD STD STD STD STD

COURSES NON-PART 147

Debriefing Debriefing Debriefing Debriefing Debriefing

MAINTENANCE
DAY 6 DAY 7 DAY 8 DAY 9 DAY 1 0

4. OTHER
Briefing Briefing Briefing Briefing Briefing
Module 2 - Aircraft
ACOS ACOS ACOS ACOS ACOS
DAY 1 DAY 2 DAY 3 DAY 4 DAY 5
ACOS ACOS ACOS ACOS ACOS
Examination/ Examination/

5. ATR MODULAR
Briefing Briefing Briefing Briefing Briefing

MAINTENANCE
Debriefing Debriefing Debriefing
Debriefing Debriefing

TRAINING
Practical training Practical training Practical training Practical training Practical training
DAY 1 1 DAY 1 2 DAY 1 3 DAY 1 4 DAY 1 5
Practical training Practical training Practical training Practical training Practical training
Examination/ Debriefing Debriefing Debriefing Debriefing Debriefing
Briefing Briefing Briefing Briefing
Debriefing
Examination/ Examination/

EQUIPMENT
QUIPMENT
IPMENT
6. TRAINING
ACOS ACOS ACOS
Debriefing Debriefing

ACOS ACOS ACOS ACOS ACOS

Examination/ Examination/
Debriefing Debriefing Debriefing
Debriefing Debriefing

7. GLOSSARY
DAY 1 6 DAY 1 7 DAY 1 8

G OSS
Briefing Briefing Briefing
Examination/ Examination/ Examination/
Debriefing Debriefing Debriefing

8. GENERAL TERMS
AND CONDITIONS
ACOS ACOS ACOS
Debriefing Debriefing Debriefing

Contact [email protected] for scheduling 13

 2. MAINTENANCE COURSES - TYPE RATING PART 147 DURATION

2.4 B2-T2 ADDITIONAL EASA APPROVED 11 DAYS

MECHANICAL COURSE
1. OUR TRAINING
PHILOSOPHY
PH

WHO IS ELIGIBLE? PROGRAMME

Maintenance personnel wishing to get upgraded from category B2 to category B1 All ATR models
2. MAINTENANCE

RATING PART 147

COURSES TYPE

with additional training covering the mechanical systems at level III Transition Programme course from T2 to T1 - B2/T2 Training Programme. Powered
PREREQUISITES with PWC PW 120 series
1. To be qualified as B2-T2 performed in ATR Training Center
2. To have good knowledge of the English language
THEORETICAL TRAINING
47 RATING NON-PART 147
47
3. MAINTENANCE

OBJECTIVES
COURSES TYPE

DAY 1 DAY 2 DAY 3 DAY 4 DAY 5

COURSE OUTLINE Welcome Briefing Briefing Briefing Briefing

Additional training includes the following modules.
Examination/ Examination/
ACOS ACOS ACOS
THEORETICAL PART: 6 DAYS, ALL ATR MODELS Debriefing Debriefing
COURSES NON-PART 147

This module consists of the theoretical description (level3) of ATR mechanical

MAINTENANCE

Examination/ Examination/
systems and takes place in the classroom, using ACOS. ACOS ACOS ACOS
4. OTHER

Debriefing Debriefing
PRACTICAL PART: 5 DAYS, ALL ATR MODELS Debriefing Debriefing Debriefing Debriefing Debriefing

Module 1: Cockpit Test & Operations: 3 days DAY 6

This sub-module is run on STD (Synthetic Training Device) . It is a computer-based
5. ATR MODULAR
MAINTENANCE

training tool dedicated to maintenance staff training. Its aim is to apply operational Examination/
TRAINING

procedures in a 3D virtual environment by interacting with the elements of the Debriefing

aircraft. It also includes a field trip to the ATR assembly line for systems component ACOS/
Debriefing
location. It comprises the testing and operations of aircraft systems.

Module 2: Aircraft Maintenance Practice: 2 days PRACTICAL TRAINING

EQUIPMENT
6. TRAINING

This sub-module is carried out on real aircraft. It comprises the most significant
MODULE 1 MODULE 2
maintenance operations on mechanical systems.
DAY 1 DAY 2 DAY 3 DAY 4 DAY 5

DOCUMENTATION Briefing Briefing Briefing Briefing Briefing

• Maintenance Training Notes (MTN)
7. GLOSSARY

FT FT FT Practical Training Practical Training

• Flight Deck Layout Posters and supplementary manuals, as appropriate
• Also available: Maintenance documentation STD STD STD Practical Training Practical Training
Briefing Briefing Briefing Debriefing Debriefing
8. GENERAL TERMS
AND CONDITIONS

14 Contact [email protected] for scheduling

 2. MAINTENANCE COURSES - TYPE RATING PART 147 DURATION

2.5 A-T3 EASA APPROVED 5 DAYS

MECHANICS COURSE

1. OUR TRAINING
PHILOSOPHY
WHO IS ELIGIBLE? PROGRAMME
Personnel required to issue certificates for release to service following minor line ATR 42-200/300 series or ATR 72-100/200 series

2. MAINTENANCE

RATING PART 147

COURSES TYPE
maintenance and simple defect rectifications. or ATR 42-400/500/72-212A (-500 or -600)
PREREQUISITES T3 Training Programme. Powered with PWC PW 120 serie
1. To be certified staff or equivalent with 1 year experience in a similar aircraft
category. DAY 1 DAY 2 DAY 3 DAY 4 DAY 5
2. To have good knowledge of the English language

47 RATING NON-PART 147

47
3. MAINTENANCE
COURSES TYPE
Welcome/
Briefing Briefing Briefing Briefing
Briefing
OBJECTIVES
• To provide the maintenance engineer with thorough knowledge of the ATR Practical Practical Practical Practical Practical
systems associated with ramp and transit operations. Training Training Training Training Training
• To enable the trainee to effectively carry out fault-diagnosis and repairs,

COURSES NON-PART 147

in accordance with maintenance procedures.

MAINTENANCE
Practical Practical Practical Practical Practical

4. OTHER
COURSE OUTLINE Training Training Training Training Training
This is a “Practical Training” course, which includes maintenance tasks for ramp and
transit operations and it is carried out on real aircraft. Debriefing Debriefing Debriefing Debriefing Debriefing

5. ATR MODULAR
DOCUMENTATION

MAINTENANCE
TRAINING
• Maintenance Training Notes (MTN)
• Flight Deck Layout Posters and supplementary manuals, as appropriate
• Also available: Maintenance documentation

EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 15
 2. MAINTENANCE COURSES - TYPE RATING PART 147 DURATION

2.6 C-T4 BASE MAINTENANCE EASA APPROVED 5 DAYS

CERTIFYING ENGINEER COURSE
1. OUR TRAINING
PHILOSOPHY
PH

WHO IS ELIGIBLE? PROGRAMME

This course is also designed for technical managers and quality departments ATR 42-200/300 series or ATR 72-100/200 series
2. MAINTENANCE

RATING PART 147

COURSES TYPE

who wish to acquire knowledge of ATR aircraft systems. or ATR 42-400/500/72-212A (either -500 or -600)
Maintenance supervisors required to issue certificates of release to service following T4 Training Programme. Powered with PWC PW 120 series
the line and base maintenance of the aircraft.
PREREQUISITES DAY 1 DAY 2 DAY 3 DAY 4 DAY 5
1. To have good basic knowledge of aircraft systems
47 RATING NON-PART 147
47
3. MAINTENANCE

2. To be certified staff or equivalent

COURSES TYPE

Welcome Briefing Briefing Briefing Briefing

3. To have good knowledge of the English language
Course Examination/ Examination/
ACOS ACOS
presentation Debriefing Debriefing
OBJECTIVES
• To provide maintenance management with comprehensive knowledge of the
COURSES NON-PART 147

ATR Systems ACOS ACOS ACOS ACOS ACOS

MAINTENANCE
4. OTHER

COURSE OUTLINE
Examination/
This course takes place in a classroom, using ACOS. All ATR systems are described Debriefing Debriefing Debriefing Debriefing
Debriefing
at level 1 knowledge.
5. ATR MODULAR

DOCUMENTATION
MAINTENANCE
TRAINING

• Maintenance Training Notes (MTN)

• Flight Deck Layout Posters and supplementary manuals, as appropriate
• Also available: Maintenance documentation
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

16 Contact [email protected] for scheduling

 2. MAINTENANCE COURSES - TYPE RATING PART 147 DURATION

2.7 B1-T1 AND B2-T2 MAINTENANCE EASA APPROVED

2 TO 12
DIFFERENCES COURSE DAYS

1. OUR TRAINING
PHILOSOPHY
WHO IS ELIGIBLE? NON PART 147 DIFFERENCES COURSE 500 > 600 VARIANTS
Certified staff or equivalent technician qualified for one ATR aircraft type and AV S A I R C R A F T P R A C T I CA L

2. MAINTENANCE

RATING PART 147

TO

COURSES TYPE
wishing to be qualified for another type. T R A I N I N G - M A N DATO R Y I F N OT
AT R 4 2 - 6 0 0 & 7 2 - 6 0 0
EXPERIENCED ON GLASS
FROM
CO C K P I T CO N C E P T
OBJECTIVES
• To enable the technician to efficiently work on another ATR variant T1: 4 days T1: 1 day
AT R 4 2 / 7 2 - 5 0 0 T2: 5 days T2: 2 days

47 RATING NON-PART 147

47
COURSE OUTLINE

3. MAINTENANCE
T1+T2: 5 days T1+T2: 2 days

COURSES TYPE
The required training module chosen from the table below will depend on the
aircraft type.
NON PART 147 DIFFERENCES COURSE 600 > 500 VARIANTS
ATR ENGINE POWERED WITH PWC PW 120 SERIES
TO O P T I O N A L AV S
TO AT R 4 2 - 5 0 0 & 7 2 - 5 0 0
AT R 7 2 - 1 0 0 / - 2 0 0 & 4 2 / 7 2 A I R C R A F T O R S I M U L ATO R F F T

COURSES NON-PART 147

AT R 7 2 - 1 0 0 / 2 0 0 FROM
(500/600)

MAINTENANCE
FROM

4. OTHER
T1: 4 days T1: 1 day
T1: 4 days T1: 10,5 days AT R 4 2 / 7 2 - 6 0 0 T2: 5 days T2: 2 days
AT R 4 2 - 2 0 0 / 3 0 0 S E R I E S T2: 2 days T2: 7,5 days T1+T2: 5 days T1+T2: 2 days
T1+T2: 5 days T1+T2: 11,5 days

5. ATR MODULAR
TO

MAINTENANCE
AT R 4 2 / 7 2 AT R 4 2 - 2 0 0 / 3 0 0
AT R 4 2 - 2 0 0 / 3 0 0

TRAINING
(500/600) & 42/72 (500/600)
FROM

T1: 4 days T1: 10,5 days

AT R 7 2 - 1 0 0 / 2 0 0 S E R I E S T2: 2,5 days T1: 6 days T2: 7,5 days
T1+T2: 5 days T1+T2: 12 days

EQUIPMENT
6. TRAINING
TO AT R 4 2 - 2 0 0 / 3 0 0
AT R 7 2 - 1 0 0 / 2 0 0
& 72-100/200
FROM

T1: 10 days
AT R 4 2 / 7 2 ( 5 0 0 / 6 0 0 ) T2: 7,5 days T1: 5,5 days
T1+T2: 12 days

7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 17
 3.
MAINTENANCE
COURSES
TYPE RATING
NON-PART 147
Product catalogue 2018 – Issue 1

19
 3. MAINTENANCE COURSES – TYPE RATING NON-PART 147 DURATION

3.1 LINE & BASE 20 DAYS

MECHANICS COURSE
1. OUR TRAINING
PHILOSOPHY
PH

WHO IS ELIGIBLE? WEEK 1 THEORETICAL TRAINING

Personnel associated with line and base maintenance related to the airframe and DAY 1 DAY 2 DAY 3 DAY 4 DAY 5
2. MAINTENANCE

RATING PART 147

COURSES TYPE

power plant systems.

Welcome Briefing Briefing Briefing Briefing
PREREQUISITES
Course
1. To have experience in aircraft maintenance related to airframe and power plant Presentation
ACOS ACOS ACOS ACOS
systems on similar aircraft.
2. To have good knowledge of the English language Examination/ Examination/
47 RATING NON-PART 147
47

ACOS ACOS ACOS

Debriefing Debriefing
3. MAINTENANCE
COURSES TYPE

Debriefing Debriefing ACOS Debriefing ACOS

OBJECTIVES
• To gain comprehensive knowledge of the mechanical systems. This course is not WEEK 2 THEORETICAL TRAINING
applicable for -600 aircraft.
DAY 6 DAY 7 DAY 8 DAY 9 DAY 1 0
COURSES NON-PART 147

COURSE OUTLINE
Briefing Briefing Briefing Briefing Briefing
MAINTENANCE

THEORETICAL PART: 15 DAYS

4. OTHER

ACOS ACOS ACOS ACOS ACOS

This module consists of the theoretical description of ATR mechanical systems
(level 3), electrical systems (level 2), and avionics systems (level 1).It takes place ACOS ACOS ACOS ACOS ACOS
in the classroom, using ACOS. Examination/ Examination/
Debriefing Debriefing Debriefing
Debriefing Debriefing
PRACTICAL PART - COCKPIT TEST & OPERATION: 5 DAYS (IF REQUIRED)
5. ATR MODULAR
MAINTENANCE

This sub-module is carried out on Simulator and includes a field trip to the ATR
TRAINING

WEEK 3 THEORETICAL TRAINING

assembly line for systems component location. It comprises the testing and running
of the mechanical and electrical systems that can be performed from the cockpit. DAY 1 1 DAY 1 2 DAY 1 3 DAY 1 4 DAY 1 5

Briefing Briefing Briefing Briefing Briefing

DOCUMENTATION ACOS ACOS ACOS ACOS ACOS
EQUIPMENT
6. TRAINING

• Maintenance Training Notes (MTN) Examination/

ACOS ACOS ACOS ACOS
• Flight Deck Layout Posters and supplementary manuals, as appropriate Debriefing
• Also available: Maintenance documentation Debriefing Debriefing
Examination/
Debriefing Briefing/ACOS
Debriefing

PROGRAMME PRACTICAL TRAINING

WEEK 4
7. GLOSSARY

LINE & BASE MECHANIC’S PROGRAMME ENGINE POWERED WITH PWC PW

DAY 1 DAY 2 DAY 3 DAY 4 DAY 5
120 SERIES
ATR 42-400/500 or 72-212A (-500 or -600) or ATR 72-100/200 series or ATR 42- Briefing Briefing Briefing Briefing Briefing
200/300 series Field Trip Field Trip Field Trip Field Trip Field Trip
8. GENERAL TERMS
AND CONDITIONS

Simulator Simulator Simulator Simulator Simulator

Debriefing Debriefing Debriefing Debriefing Debriefing

20 Contact [email protected] for scheduling

 21

5. ATR MODULAR 4. OTHER 3. MAINTENANCE 2. MAINTENANCE

8. GENERAL TERMS 6. TRAINING 1. OUR TRAINING
7. GLOSSARY MAINTENANCE MAINTENANCE COURSES TYPE COURSES TYPE
AND CONDITIONS EQUIPMENT PHILOSOPHY
TRAINING COURSES NON-PART 147
47 RATING NON-PART 147
47 RATING PART 147
 3. MAINTENANCE COURSES – TYPE RATING NON-PART 147 DURATION

3.2 LINE & BASE 30 DAYS

ALL SYSTEMS COURSE
1. OUR TRAINING
PHILOSOPHY
PH

WHO IS ELIGIBLE? DOCUMENTATION

Personnel associated with line and base maintenance referring to the electrical, • Maintenance Training Notes (MTN)
2. MAINTENANCE

RATING PART 147

COURSES TYPE

avionics and mechanical systems. • Flight Deck Layout Posters and supplementary manuals, as appropriate
PREREQUISITES • Also available: Maintenance documentation
1. To have experience in aircraft maintenance related to the electrical, avionics and
mechanical systems.
2. To have good knowledge of the English language
47 RATING NON-PART 147
47
3. MAINTENANCE
COURSES TYPE

OBJECTIVES
• To gain comprehensive knowledge of the electrical, avionics and mechanical ATR
systems. This course is not applicable for -600 aircraft.
COURSES NON-PART 147

COURSE OUTLINE
MAINTENANCE

THEORETICAL PART: 23 DAYS

4. OTHER

This module consists of the theoretical description of ATR mechanical, electrical

and avionics systems (level 3). It takes place in the classroom, using ACOS.
PRACTICAL PART COCKPIT & TEST OPERATIONS: 7 DAYS (IF REQUIRED)
This sub-module is carried out on Simulator and includes a field trip to the ATR
5. ATR MODULAR
MAINTENANCE

assembly line for systems component location. It includes the testing and operation
TRAINING

of the mechanical, electrical and avionics systems that can be conducted from the
cockpit.
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

22 Contact [email protected] for scheduling

 1. OUR TRAINING
PHILOSOPHY
PROGRAMME
LINE & BASE ALL SYSTEMS PROGRAMME ENGINE POWERED WITH PWC PW 120 SERIES

2. MAINTENANCE

RATING PART 1477

COURSES TYPE
ATR 42-400/500/72-212A (-500 or -600) or ATR 72-100/200 series or ATR 42-200/300 series

WEEK 1 THEORETICAL TRAINING WEEK 4 THEORETICAL TRAINING

DAY 1 DAY 2 DAY 3 DAY 4 DAY 5 DAY 1 6 DAY 1 7 DAY 1 8 DAY 1 9 DAY 2 0

47 RATING NON-PART 147

47
3. MAINTENANCE
COURSES TYPE
Welcome Briefing Briefing Briefing Briefing Welcome Briefing Briefing Briefing Briefing
Course Course
ACOS ACOS ACOS ACOS ACOS ACOS ACOS ACOS
Presentation Presentation

ACOS ACOS ACOS ACOS ACOS ACOS ACOS ACOS ACOS ACOS

COURSES NON-PART 147

Examination/ Examination/ Examination/ Examination/ Examination/
Debriefing Debriefing Debriefing Debriefing Debriefing

MAINTENANCE
Debriefing Debriefing Debriefing Debriefing Debriefing

4. OTHER
WEEK 2 THEORETICAL TRAINING WEEK 5 THEORETICAL/PRACTICAL TRAINING

DAY 6 DAY 7 DAY 8 DAY 9 DAY 1 0 P R A C T I CA L PA R T P R A C T I CA L PA R T

DAY 2 1 DAY 2 2 DAY 2 3

5. ATR MODULAR
DAY 1 DAY 2

MAINTENANCE
Briefing Briefing Briefing Briefing Briefing

TRAINING
ACOS ACOS ACOS ACOS ACOS Briefing Briefing Briefing Briefing Briefing
ACOS ACOS ACOS Field Trip Field Trip
ACOS ACOS ACOS ACOS ACOS
Examination/ Examination/ Examination/ ACOS ACOS ACOS Simulator Simulator
Debriefing Debriefing
Debriefing Debriefing Debriefing Examination/ Examination/
Debriefing Debriefing Debriefing
Debriefing Debriefing

EQUIPMENT
QUIPMENT
IPMENT
6. TRAINING
WEEK 3 THEORETICAL TRAINING
WEEK 6 PRACTICAL TRAINING
DAY 1 1 DAY 1 2 DAY 1 3 DAY 1 4 DAY 1 5
DAY 3 DAY 4 DAY 5 DAY 6 DAY 7
Welcome Briefing Briefing Briefing Briefing

7. GLOSSARY
Briefing Briefing Briefing Briefing Briefing
Course

G OSS
ACOS ACOS ACOS ACOS Field Trip Field Trip Field Trip Field Trip Field Trip
Presentation

ACOS ACOS ACOS ACOS ACOS Simulator Simulator Simulator Simulator Simulator
Examination/ Examination/ Examination/ Examination/ Debriefing Debriefing Debriefing Debriefing Debriefing
Debriefing
Debriefing Debriefing Debriefing Debriefing

8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 23
 4.
OTHER
MAINTENANCE
COURSES
NON-PART 147
Product catalogue 2018 – Issue 1

25
 4.1 REFRESH AND TROUBLE SHOOTING DURATION

4.1.1 MAINTENANCE REFRESH TRAINING 5 - 7 DAYS

B1-T1 AND B2-T2 COURSE
1. OUR TRAINING
PHILOSOPHY

WHO IS ELIGIBLE? B2-T2 REFRESHER PROGRAMME ENGINE POWERED WITH PWC PW 120
SERIES
Maintenance engineers with ATR Aircraft Type experience.
ATR 42-400/500/72-212A (-500, -600) or ATR 72-100/200 series or ATR 42-200/300
2. MAINTENANCE

RATING PART 147

COURSES TYPE

PREREQUISITES seriesDAY 1 DAY 2 DAY 3 DAY 4 DAY 5

1. To have completed the B1 – T1 or the B2 – T2 course or equivalent.
2. To have good knowledge of the English language Welcome Briefing Briefing Briefing Briefing
3. To have at least 2 years of experience on ATR aircraft
Course
ACOS ACOS ACOS ACOS
presentation
COURSES NON-PART 147 RATING NON-PART 147
3. MAINTENANCE

Note:
COURSES TYPE

- The standard training duration is valid for a trainee owning an ATR qualification ACOS ACOS ACOS ACOS ACOS
with less than 2 years out of active service. Examination/ Examination/ Examination/
Debriefing Debriefing
- 10 days T1 or 8 days T2 or 15 days T1 + T2 refresher courses will be applicable Debriefing Debriefing Debriefing
to an ATR qualified trainee with less than 7 years out of active service
B1-T1/B2-T2 REFRESHER PROGRAMME ENGINE POWERED WITH PWC PW
- More than 7 years out of active service will request a customised offer.
MAINTENANCE

120 SERIES
4. OTHER

ATR 42-400/500/72-212A (-500, -600) or ATR 72-100/200 series or ATR 42-200/300

OBJECTIVES series
• To refresh knowledge acquired in previous courses.
WEEK 1

PROGRAMME DAY 1 DAY 2 DAY 3 DAY 4 DAY 5

5. ATR MODULAR
MAINTENANCE
TRAINING

B1-T1 REFRESHER PROGRAMME ENGINE POWERED WITH PWC PW 120 SERIES Welcome Briefing Briefing Briefing Briefing
ATR 42-400/500/72-212A (-500, -600) or ATR 72-100/200 series or ATR 42-200/300 series Course Examination/
ACOS ACOS ACOS
presentation Debriefing

DAY 1 DAY 2 DAY 3 DAY 4 DAY 5 ACOS ACOS ACOS ACOS ACOS
EQUIPMENT
6. TRAINING

Welcome Briefing Briefing Briefing Briefing Examination/ Examination/ Examination/

Debriefing Debriefing
Debriefing Debriefing Debriefing
Course Examination/
ACOS ACOS ACOS
presentation Debriefing WEEK 2

ACOS ACOS ACOS ACOS ACOS DAY 6 DAY 7

7. GLOSSARY

Examination/ Examination/ Examination/

Debriefing Debriefing Briefing Briefing
Debriefing Debriefing Debriefing
ACOS ACOS

ACOS ACOS
Examination/
8. GENERAL TERMS
AND CONDITIONS

Debriefing
Debriefing

26 Contact [email protected] for scheduling

 4.1 REFRESH AND TROUBLE SHOOTING DURATION

4.1.2 TROUBLE SHOOTING COURSE 10 DAYS

5 DAYS
ALL SYSTEM 3 DAYS

1. OUR TRAINING
PHILOSOPHY
WHO IS ELIGIBLE? COURSE OUTLINE
This training has been designed using ATR customer feedback database AWARE
Line and Base Maintenance Engineers qualified for ATR aircraft type 500 and/or
(ATR Website Aircraft Report and Exchange).

2. MAINTENANCE

RATING PART 147

COURSES TYPE
600 involved in aircraft trouble shooting processes. We took this database as a reference (10 years of feedback) which stores the
Participants must have good knowledge of the English language and aircraft systems. recurrent systems failures which have resulted in departures being delayed by
more than 15 minutes, in order to:
OBJECTIVES • Perform classification by ATA chapter on the 10 most failed equipment
• Analyse, by ATA chapter, recurrent failures and help mechanics how to recognise
This training shows the correct use of Trouble shooting technics in order to isolate

COURSES NON-PART 147 RATING NON-PART 147

them

3. MAINTENANCE
COURSES TYPE
most of the failure improving dispatch reliability:
• Identify Complex TS analysis
Trouble shooting course is organized by ATA chapter and focuses on: • Know how to use diagnostic tools (MFC memory, Alpha Call-Up, ACMS reports,
• Systems operation refresh (Airframe, Power- Plant, Electrical and Avionics), AVS bite, Computer front face etc…)
• Top 10 suspected equipments • ATR Technical Documentation (TSM, SL, ASM, TPS etc...)
• Recurrent system failures This course includes a theoretical part taught by an instructor and TS exercises by
• Aircraft diagnostic tools using Simulation Training tools.

MAINTENANCE
• Use of Technical Documentation for TS

4. OTHER
TS course tailored with 4 groups of training activities by ATA chapters:
1. Centralised Maintenance ATA 31, 42, 45
DOCUMENTATION 2. Airframe ATA 21, 24, 26, 28, 27, 29, 30, 32, 35, 36, 52
Trouble Shooting Training Notes will be provided to the trainees. 3. Power & Plant 61, 70
4. Avionics 22, 23, 34

5. ATR MODULAR
MAINTENANCE
TRAINING
COURSE DATA TRAINING TOPIC & DURATION
• Airline Customer feedback The course is organised by ATA chapter and focuses on:
• AWARE Database collection • System operation refresh
Available for B1/B2 certifying staff
• Top10 suspected Equipment
Last 10 years • System reccurent failures Training duration

EQUIPMENT
6. TRAINING
• Aircraft diagnostic tools 10 days for groups 1, 2, 3 and 4
5 days for groups 1+3 or 2
• Documentation 3 days for groups 1+4 or 3 for 500 only

7. GLOSSARY
COURSE BENEFITS TRAINING TOOLS
• System knowleges & refresh
• Trouble shooting efficiency • Aircraft Systems operation
• Maintenance cost reduction • Aircraft component location
• Diagnostic Tools, Documentation

8. GENERAL TERMS
AND CONDITIONS
Improve aircraft reliability

Contact [email protected] for scheduling 27

 4.1 REFRESH AND TROUBLE SHOOTING DURATION

4.1.3 PHOBOS COURSE – MFC SYSTEMS 2,5 DAYS

1. OUR TRAINING
PHILOSOPHY

Phobos is a dedicated tool to trouble shoot systems controlled and monitored by PROGRAMME
the MFC (Multi-Function Computer).
DAY 1 DAY 2 DAY 3
2. MAINTENANCE

RATING PART 147

COURSES TYPE

WHO IS CONCERNED?
Theoretical Part:
Line and Base Maintenance Engineers qualified for ATR aircraft type involved in Theoretical Part: MFC’s OUPUTS/AUDIO
aircraft trouble shooting processes. Theoretical Part: PHOBOS TOOL Presentation Check using PHOBOS
MFC’s History & refresh PHOBOS Installation Practical Part:
Participants must have good knowledge of the English language & the Aircraft MFC’s Implementation & on Laptop OUPUTS & AUDIOS CHECKS
COURSES NON-PART 147 RATING NON-PART 147

systems.
3. MAINTENANCE

Systems MFC’s INPUTS Check using Practical Trouble Shooting

COURSES TYPE

PHOBOS Exercises using Training Tool

& Aircraft (2H00 required)
OBJECTIVES
To study the alternative trouble shooting method using PHOBOS TOOL
Practical Part:
• MFC’s HISTORY & DESCRIPTION INPUTS CHECKS
• MFC’s IMPLEMENTATION & SYSTEMS Theoretical Part: Practical Trouble Shooting
MAINTENANCE

• TROUBLE SHOOTING MFC’s SYSTEMS USING PHOBOS TOOL Failure Data Analysis Exercises using Simulation
4. OTHER

TSM & ASM Documentation Training Tool

• PHOBOS FUNCTIONALITIES refresh Practical Trouble Shooting
• TROUBLE SHOOTING EXERCISES Exercises using Aircraft
- USING A SIMULATION TOOL (2H00 required)
- USING PHOBOS ON AIRCRAFT
5. ATR MODULAR
MAINTENANCE

COURSE OUTLINE
TRAINING

This course includes a theoretical part taught by an instructor using a Simulation

Training tool
A classroom with a high definition video projector is required
Due to the practical part on aircraft.:
• The PHOBOS course is limited to 6 Trainees
EQUIPMENT
6. TRAINING

• 2 practical sessions require access to an Aircraft in Flight Ready conditions fitted

with MFC Standard 4 or 6
• A company Laptop running PHOBOS software associated to PHOBOS TOOL KIT
will be used for the practical part, (if available).
7. GLOSSARY

DOCUMENTATION
• PHOBOS Training Notes will be provided to the trainees.
8. GENERAL TERMS
AND CONDITIONS

28 Contact [email protected] for scheduling

 4.1 REFRESH AND TROUBLE SHOOTING DURATION

4.1.4 MPC ADVANCED COURSE 2/2,5 DAYS

ATR LEGACY AIRCRAFT

1. OUR TRAINING
PHILOSOPHY
WHO IS ELIGIBLE? PROGRAMME
Line and Base Maintenance Engineers qualified for ATR legacy aircraft who need to DAY 1 DAY 2 DAY 3

2. MAINTENANCE

RATING PART 147

COURSES TYPE
operate the Multi-Purpose Computer (MPC) System.
Participants must have good knowledge of the English language MPC Presentation Aircraft MPC Practice
MPC JICs
AFDAU/DMU Functions (If aircraft available)
OBJECTIVES
To obtain or improve knowledge on MPC equipped ATRs regarding:

COURSES NON-PART 147 RATING NON-PART 147

MPC TSM & MMEL Simulation MPC Operation

3. MAINTENANCE
COURSES TYPE
• The AFDAU/DMU Functions
• MPC Operation Practice
• MPC Troubleshooting and MMEL
• The MPC JICs (Job Instruction Card).
COURSE OUTLINE
This course includes a theoretical part taught by an instructor and using ACOS, PPT

MAINTENANCE
4. OTHER
and an MPC Simulator for practice. Additional practical part can be done on aircraft.

DOCUMENTATION
• Training Notes Documentation and MPC JICs

5. ATR MODULAR
MAINTENANCE
TRAINING
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 29
 4.2 DOCUMENTATION DURATION

4.2.1 ATRN@V ATR MAINTENANCE 2 DAYS

DOCUMENTATION
1. OUR TRAINING
PHILOSOPHY

WHO IS ELIGIBLE? PROGRAMME

Maintenance personnel who want to be familiar with ATR maintenance documentation DAY 1 DAY 2
2. MAINTENANCE

RATING PART 147

COURSES TYPE

Participants must have good knowledge of the English language

ADOC Navigator & ATRN@v presentation ASM & IPC manuals utilisation
OBJECTIVES
• To obtain or improve knowledge of ATR Maintenance Documentation and ADOC AMM JICs & SB interaction
navigator utilisation
COURSES NON-PART 147 RATING NON-PART 147
3. MAINTENANCE
COURSES TYPE

COURSE OUTLINE
This course comprises a theoretical part taught by an instructor, describing the
different ATRN@v functionality and using practical exercises. The aim of this course
is the use of technical documentation like AMM/ASM/AWM/IPC/JIC etc…

DOCUMENTATION
MAINTENANCE
4. OTHER

• Training Notes Manual and Maintenance Manual in electronic formats

5. ATR MODULAR
MAINTENANCE
TRAINING
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

30 Contact [email protected] for scheduling

 4.2 DOCUMENTATION DURATION

4.2.2 STANDARD PRACTICES MANUALS 2 DAYS

ATR MAINTENANCE DOCUMENTATION

1. OUR TRAINING
PHILOSOPHY
WHO IS ELIGIBLE? PROGRAMME
Maintenance personnel who want to be familiar with standard practices on ATR DAY 1 DAY 2

2. MAINTENANCE

RATING PART 147

COURSES TYPE
aircraft systems.
Participants must have good knowledge of the English language. SPM introduction SRM / ATA 20 introduction

OBJECTIVES
Practical exercise Practical exercise
• To obtain or improve one’s knowledge on ATA 20 / SPM maintenance documentation

COURSES NON-PART 147 RATING NON-PART 147

3. MAINTENANCE
COURSES TYPE
and SRM chapter 51.
COURSE OUTLINE
This course comprises a theoretical part taught by an instructor, using
• ATA 20 Mechanical Standard Practices
• SPM Electrical Standard Practices
• SRM Structure Standard Practices

MAINTENANCE
4. OTHER
DOCUMENTATION
• Maintenance Training Notes and Maintenance Manuals, as required.

5. ATR MODULAR
MAINTENANCE
TRAINING
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 31
 4.2 DOCUMENTATION DURATION

4.2.3 STRUCTURE REPAIR MANUAL (SRM) 3-4 DAYS

FAMILIARISATION COURSE
1. OUR TRAINING
PHILOSOPHY

WHO IS ELIGIBLE? PROGRAMME

Structure Repair Engineers
2. MAINTENANCE

RATING PART 147

SRM USE ONLY (3 DAYS)

COURSES TYPE

PREREQUISITES
1. To have Structure Repair experience. DAY 1 DAY 2 DAY 3
2. To have good knowledge of the English language.
Metallic Damage Composite Damage
Structure & Regulation
definition & criteria definition & criteria
OBJECTIVES
COURSES NON-PART 147 RATING NON-PART 147
3. MAINTENANCE
COURSES TYPE

• 
To provide Structure Repair knowledge on ATR structures using SRM (ATR
Structure Repair Manual). Metallic Damage Composite Damage
SRM Breakdown
Sketch build up Sketch build up
COURSE OUTLINE
All of the ATR Structure Repairs chapters in the manual are described.
Final Assembly Line Visit
DEPENDING ON THE TRAINEE’S EXPERIENCE, (Toulouse only) or Aircraft S.R.M. Exercices S.R.M. Exercices
MAINTENANCE

THE TRAINING LASTS 3 OR 4 DAYS Walkaround

4. OTHER

• For engineers with the ATR Structure experience, the SRM Familiarisation Course
lasts 3 days including Exercises.
• For engineers without ATR structure experience, the first day is dedicated to ATR STRUCTURE AND SRM USE (4 DAYS)
ATR Structure Familiarisation, before completing the 3 days SRM Familiarisation DAY 1 DAY 2 DAY 3 DAY 4
5. ATR MODULAR
MAINTENANCE

Course.
TRAINING

Metallic Damage Composite Damage

Structure Generalities Structure & Regulation
DOCUMENTATION definition & criteria definition & criteria

• Maintenance Training Notes (MTN)

• Also available: SRM and additional manuals if appropriate Structural
Metallic Damage Composite Damage
Documentation SRM Breakdown
Sketch build up Sketch build up
EQUIPMENT
6. TRAINING

Presentation

Final Assembly Line

Structure Breakdown Visit (Toulouse only) S.R.M. Exercices S.R.M. Exercices
or Aircraft Walkaround
7. GLOSSARY

Propeller Information
& Windows
8. GENERAL TERMS
AND CONDITIONS

32 Contact [email protected] for scheduling

 4.2 DOCUMENTATION DURATION

4.2.4 ATR MMEL/CDL MAINTENANCE 2 DAYS

COURSE

1. OUR TRAINING
PHILOSOPHY
MMEL/CDL provides aircraft dispatch capability in case of systems malfunction. DOCUMENTATION
• Maintenance Training Notes (MTN)
WHO IS ELIGIBLE?

2. MAINTENANCE

RATING PART 147

COURSES TYPE
• Also available: Ops documentation
Line maintenance engineers.

OBJECTIVES
• To improve knowledge on MMEL/CDL and items associated with maintenance

COURSES NON-PART 147 RATING NON-PART 147

3. MAINTENANCE
COURSES TYPE
operations.
COURSE OUTLINE
This course allows, through practical exercises, the use of MMEL/CDL in order to
learn how to release the aircraft after systems failure. All the maintenance operations
included in the MMEL are explained to facilitate the release of the airplane

MAINTENANCE
4. OTHER
5. ATR MODULAR
MAINTENANCE
TRAINING
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 33
 4.2 DOCUMENTATION DURATION

4.2.5 ATR 42/72 MAINTENANCE PROGRAMME 3 DAYS

DEVELOPMENT PROCESSES (MSG3/MBRB) COURSE
1. OUR TRAINING
PHILOSOPHY

WHO IS ELIGIBLE?
Airline representatives involved in Maintenance Programme Development
2. MAINTENANCE

RATING PART 147

COURSES TYPE

processes (Maintenance Working Groups or Industrial Steering Committees).

ATR Engineering Support Department staff involved in Maintenance Programme
Development.
PREREQUISITES
1. To have general knowledge of aircraft maintenance process and environment.
COURSES NON-PART 147 RATING NON-PART 147
3. MAINTENANCE

2. Recommended but not compulsory: to have previously participated in MSG-3

COURSES TYPE

Maintenance Working Group.

OBJECTIVES
• To describe Scheduled Maintenance Development based on MSG-3 logic and
Maintenance Review Board Reports (MRBRs) presentations.
MAINTENANCE
4. OTHER

• To show how to compile the matching Maintenance Planning Document (MPD).

COURSE OUTLINE
The instruction provided throughout the ATR Scheduled Maintenance programme
provides Scheduled Maintenance Development & Process information for
5. ATR MODULAR

familiarisation with the following: MSG-3 logic, Policy & Procedures Handbook
MAINTENANCE
TRAINING

(PPH), Maintenance Review Board Reports (MRBRs), the Maintenance Planning

Document (MPD)…

DOCUMENTATION
• CD ROM.
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

34 Contact [email protected] for scheduling

 4.3 POWER PLANT DURATION

4.3.1 ENGINE RUN-UP COURSE 3,5 DAYS

1. OUR TRAINING
PHILOSOPHY
ATR 42-400/500/72-212A (-500 or -600) or ATR 72-100/200 series or ATR 42- PROGRAMME
200/300 series
DAY 1 DAY 2 DAY 3 DAY 4

2. MAINTENANCE

RATING PART 147

COURSES TYPE
WHO IS ELIGIBLE?
Briefing Start/ Briefing Start/
Personnel who want to be qualified for test with engine running on ATR aircraft. Briefing Safety Engine Run-Up
shut-down shut-down
Controls Limitations Check on simulator /
Test with engine Failures Emergency
PREREQUISITES Static Tests
running procedures
or on aircraft
1. To have completed the Engine Interface Systems theoretical course, and be

COURSES NON-PART 147 RATING NON-PART 147

3. MAINTENANCE
category B1/B2 or certified equivalent.

COURSES TYPE
2. To have good knowledge of the English language. Simulator Simulator Simulator
3. Assessment on aircraft if no ERU experience.

OBJECTIVES
• To familiarise the trainee with engine/propeller governing and control

MAINTENANCE
4. OTHER
• To familiarise the trainee with the start/shut down and emergency procedures as well
as with procedures following failures, including engine checks and performance
COURSE OUTLINE
For the theoretical part, this course is held in class whilst for the practical part it is
run on a simulator. It covers all operations relating to engine starts with battery and/

5. ATR MODULAR
MAINTENANCE
TRAINING
or GPU, static checks and engine run tests.

DOCUMENTATION
• Aircraft Run-Up Training Guide

EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 35
 4.3 POWER PLANT DURATION

4.3.2 ENGINE RUN-UP REFRESH COURSE 1 DAY

1. OUR TRAINING
PHILOSOPHY

WHO IS ELIGIBLE? PROGRAMME

Personnel who want to update and refresh Engine Run-Up procedures. DAY 1
2. MAINTENANCE

RATING PART 147

COURSES TYPE

PREREQUISITES
1. ERU qualification on one ATR Type Rating. Classroom
ERU updates

OBJECTIVES
COURSES NON-PART 147 RATING NON-PART 147

• To enable the technician to carry out refresh Engine Run-Up tests and systems Simulator (2hrs)
3. MAINTENANCE

ERU procedures
COURSES TYPE

procedure in emergencies and failures conditions.

COURSE OUTLINE
The course is divided in two parts theoretical and practical.
The theoretical part is taught in the classroom by an instructor for ERU tests
procedures update.
MAINTENANCE

The practical part is run on a simulator and it covers all operations relating to engine
4. OTHER

starts with battery and/or GPU, such as static checks, engine run tests and a strong
emphasis on systems failure & emergency procedures.

DOCUMENTATION
5. ATR MODULAR
MAINTENANCE

• ERU training documentation

TRAINING
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

36 Contact [email protected] for scheduling

 4.3 POWER PLANT DURATION

4.3.3 DIFFERENCES ENGINE RUN-UP 1,5 - 5

DAYS
COURSE

1. OUR TRAINING
PHILOSOPHY
ATR 42-400/500/72-212A (-500 or -600) or ATR 72-100/200 series or ATR 42- AT R AT R
TO AT R AT R
200/300 series 42-400/500 42-600
42-200/300 72-100/200
FROM 72-500 72-600

2. MAINTENANCE

RATING PART 147

COURSES TYPE
WHO IS ELIGIBLE?
Personnel already qualified for Engine Run-Ups on one ATR aircraft type and who AT R 4 2 - 2 0 0 / 3 0 0 N/A 2,5 DAYS 2,5 DAYS 3,5 DAYS
wish to be qualified for another ATR type.
AT R 7 2 - 2 0 0 / 1 0 0 2,5 DAYS N/A 1,5 DAY 3,5 DAYS
PREREQUISITES

COURSES NON-PART 147 RATING NON-PART 147

3. MAINTENANCE
1. Held ERU on ATR relevant model

COURSES TYPE
2. Power Plant and interface systems on required aircraft AT R 4 2 - 4 0 0 / 5 0 0 / 7 2 - 5 0 0 2,5 DAYS 1,5 DAY N/A 2,5 DAYS

OBJECTIVES AT R 4 2 - 6 0 0 / 7 2 - 6 0 0 3,5 DAYS 3,5 DAYS 2,5 DAYS N/A

• To enable the technician to carry out Engine Run-Up on another ATR variant. N.B.: in case you want to cover all ATR models, ERU differences course duration

MAINTENANCE
COURSE OUTLINE is 5 days.

4. OTHER
For the theoretical part this course is held in class, whilst for the practical part it
is run on a simulator. It covers all operations relating to engine starts with battery
and/or GPU, such as static checks and engine run tests. The training module DOCUMENTATION
selection is by aircraft type. • Aircraft Run-Up Training Guide

5. ATR MODULAR
MAINTENANCE
TRAINING
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 37
 4.3 POWER PLANT DURATION

4.3.4 BOROSCOPE INSPECTION 2 DAYS

COURSE
1. OUR TRAINING
PHILOSOPHY

WHO IS ELIGIBLE? PROGRAMME

Technicians, technical managers with a basic understanding of the operation of a
DAY 1 DAY 2
2. MAINTENANCE

RATING PART 147

COURSES TYPE

turbine engine, trained and/or experienced on PW100 Series engines.

Theoretical Part:
OBJECTIVES Registration Practical Part:
Borescope Presentation Opening access
• Identify the boroscope access ports and the engine areas which can be inspected Borescopic Inspection on PW100 Task Implementation
• Explanation and handling of the boroscope equipment
COURSES NON-PART 147 RATING NON-PART 147

Engine overview Closing access

3. MAINTENANCE

Scheduled Inspection - Cold Section

COURSES TYPE

• Damage limits for relevant engine parts and interpretation of findings

Scheduled Inspection - Hot Section Final test
• Recording of relevant data by use of record sheets and photographic / videoscopic Non-Scheduled Inspection
equipment Course.
MAINTENANCE
4. OTHER
5. ATR MODULAR
MAINTENANCE
TRAINING
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

38 Contact [email protected] for scheduling

 4.3 POWER PLANT DURATION

4.3.5 ATR 42/72 500/600 PROPELLER 3 DAYS

MODULE (HS 568F)

1. OUR TRAINING
PHILOSOPHY
WHO IS ELIGIBLE? PROGRAMME
Line and Base Maintenance Engineers qualified for ATR aircraft that need to DAY 1 DAY 2 DAY 3

2. MAINTENANCE

RATING PART 147

COURSES TYPE
operate on the propeller system HS 568 F (6 Blades Propeller) for line and base
maintenance. Theoretical Part: Theoretical Part:
Participants must have good knowledge of the English language Practical Part: Aircraft
Propeller System and Propeller Protection
HS Tech Doc use
Subsystem description & Indication
Trouble Shooting
& operation Propeller Brake
OBJECTIVES

COURSES NON-PART 147 RATING NON-PART 147

3. MAINTENANCE
COURSES TYPE
To obtain or improve knowledge on Propeller Systems for Trouble Shooting and
Practical Part: Aircraft
Line maintenance operation: Theoretical Part: Practical Part: Simulation
Rigging & PEC Trim
Propeller Components Components Location
• System description and operation Balancing Technics
description & operation Maintenance Procedure
• System cockpit interface Blade damage assessment
• Components description and operation
• Trouble Shooting

MAINTENANCE
• Riggings and PEC trim

4. OTHER
• Technics of balancing
• Blade damage assessments
• Propeller technical documentation utilisation
COURSE OUTLINE

5. ATR MODULAR
MAINTENANCE
This course includes a theoretical part taught by an instructor using ACOS ATA 61,

TRAINING
Simulation training tools (VPMT/Minitrainers) and a practical part on an aircraft.

DOCUMENTATION
• Training Notes ATA 61 and maintenance documentation HS and AMM- JICs

EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 39
 4.3 POWER PLANT DURATION

4.3.6 PROPELLER BLADE LINE 2 DAYS

MAINTENANCE REPAIR COURSE (568F)
1. OUR TRAINING
PHILOSOPHY

WHO IS ELIGIBLE? PROGRAMME

Line & Base maintenance technician or engineer qualified for ATR aircraft that need DAY 1 DAY 2
2. MAINTENANCE

RATING PART 147

COURSES TYPE

to operate on the HS 568F (6 blades) propeller system Line & Base maintenance,
perform blade damage assessment on the aircraft and perform basic repairs. Theoretical Part:
Blade design and configuration
Damage assessment
OBJECTIVES Maintenance best practices Practical Part:
Blade inspection
Each student will be able to inspect and repair 568F-1 propeller blade according to
COURSES NON-PART 147 RATING NON-PART 147

Deicer repairs
3. MAINTENANCE
COURSES TYPE

the Maintenance Manual p5206. Erosion film replacement

Practical Part:
COURSE OUTLINES Blade inspection
This course includes a theoretical part and a practical part taught by an instructor. Erosion Coat touch up
- Instructions will be given on blade design, safety characteristics and configuration.
Common damaging modes, particular cases and maintenance best practices will
be provided.
MAINTENANCE
4. OTHER

- Inspection will be performed on scrapped blade to identify areas that need

repairing.
ABBREVIATIONS
- Each student will be able to practice and to perform repairs on scrapped blade.
AI Action Items
SB Service Bulletin
DOCUMENTATION
5. ATR MODULAR
MAINTENANCE

SIR Service Information Release

TRAINING

• Maintenance Manual p5206 SIL Service Information Letter

• Other applicable documentation such as AI, SB, SIL and SIR.
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

40 Contact [email protected] for scheduling

 4.4 MATRI MAINTENANCE INSTRUCTOR DURATION

4.4.1 MATRI MAINTENANCE 10 DAYS

INSTRUCTOR COURSE

1. OUR TRAINING
PHILOSOPHY
WHO IS ELIGIBLE? PROGRAMME
Experienced B1/B2 or equivalent engineers wishing to become ATR Maintenance
THEORETICAL PART

2. MAINTENANCE

RATING PART 147

COURSES TYPE
Instructors.
PREREQUISITES DAY 1 DAY 2 DAY 3 DAY 4 DAY 5
1. To have participated in an ATR Type Rating course T1 and/or T2
Course
2. To have at least 5 years of relevant technical experience Presentation
Briefing Briefing Briefing Briefing
3. To have good knowledge of the English language

COURSES NON-PART 147 RATING NON-PART 147

3. MAINTENANCE
EASA Instructor Examination/ Teaching

COURSES TYPE
Human Factors Human Factors
Regulation Debriefing Techniques
OBJECTIVES
• To gain theoretical and practical know-how which is required to become an EASA Instructor ATR Technical Pedagogical Pedagogical Teaching
effective instructor who has a thorough understanding of the teaching process Regulation Documentation Factors Factors Techniques
and of the instructor/examiner role. Debriefing Debriefing Debriefing Debriefing Debriefing
• To enable the participant to implement the acquired knowledge and to transfer it

MAINTENANCE
4. OTHER
to their future trainee.
COURSE OUTLINE PRACTICAL PART
This course associates educational expertise with ATR’s know-how in order to DAY 6 DAY 7 DAY 8 DAY 9 DAY 1 0
efficiently prepare the future instructor for his task. This course is divided into two

5. ATR MODULAR
parts: In the theoretical part, the trainee learns about human factors, pedagogical

MAINTENANCE
Briefing Briefing Briefing Briefing Briefing

TRAINING
teaching techniques as well as EASA regulations. The practical part takes place both
Instructor Instructor Instructor Instructor Teaching
in the classroom and in the simulator so as to enable the trainee to put pedagogical Guide Guide Guide Guide Practice
techniques into practice straight away. Preparation Preparation Preparation Preparation (simulator)
This course is conducted with a maximum of 4 attendees.
Teaching Teaching Teaching Teaching Teaching
Practice Practice Practice Practice Practice
DOCUMENTATION

EQUIPMENT
6. TRAINING
(classroom) (classroom) (classroom) (simulator) (simulator/vpf)
• EASA Part 147 extract
Debriefing Debriefing Debriefing Debriefing Debriefing
• Training documentation, including human factors and educational aspects

7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 41
 4.4 MATRI MAINTENANCE INSTRUCTOR DURATION

4.4.2 MATRI MAINTENANCE 5 DAYS

INSTRUCTOR REFRESH COURSE
1. OUR TRAINING
PHILOSOPHY

WHO IS ELIGIBLE? PROGRAMME

Instructors who wish to update their knowledge of new teaching tools and regulatory
DAY 1 DAY 2 DAY 3 DAY 4 DAY 5
2. MAINTENANCE

RATING PART 147

COURSES TYPE

developments.
PREREQUISITES Welcome Safety
1. Having followed the course MATRI Pedagogical Pedagogical
Regulation Human factor Management
Exercise Exercise
2. Good knowledge of the ATR aircraft EASA System
3. Good English level
COURSES NON-PART 147 RATING NON-PART 147
3. MAINTENANCE

Maintenance
COURSES TYPE

MTOE Human factor Preparation Preparation

errors
OBJECTIVES
• To refresh the required knowledge.
Safety and
• To be informed and trained with the latest tools. Examination
Human factor Precaution Execution Execution
ACOS LMS
• To update knowledge of regulations. Training
• To raise awareness on the safety management systems.
MAINTENANCE
4. OTHER

• To review the human factors aspect Events and

General
New Teaching Debriefing
COURSE OUTLINE Human factor incidents Debriefing
Methods Conclusion
Analysis
This course is conducted with a maximum of four attendees in a classroom.

DOCUMENTATION
5. ATR MODULAR
MAINTENANCE
TRAINING

• MATRI Refresh TN and cockpit layout

EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

42 Contact [email protected] for scheduling

 4.5 REPAIR AND ASSESSMENT DURATION

4.5.1 COMPOSITE REPAIR COURSE 5 DAYS

1. OUR TRAINING
PHILOSOPHY
WHO IS ELIGIBLE? OBJECTIVES
Personnel having to carry out advanced composite repairs on materials such as • To gain thorough knowledge of the materials

2. MAINTENANCE

RATING PART 147

COURSES TYPE
fibreglass, aramid, Kevlar and carbon. • To enable the trainee to perform advanced composite repairs
PREREQUISITES COURSE OUTLINE
1. To be an experienced aircraft maintenance engineer. This course covers 5 modules:
2. To have good knowledge of the English language. • Materials
3. Minimum 3 engineers, maximum 6 engineers. • Utilisation

COURSES NON-PART 147 RATING NON-PART 147

3. MAINTENANCE
• Application

COURSES TYPE
• Non Destructive Testing
• Repairs

PROGRAMME

MAINTENANCE
4. OTHER
DAY 1 DAY 2 DAY 3 DAY 4 DAY 5

• Welcome & Introduction • Vacuum Bag Schedule • Test Panel Fabrication • Test Panel Repair • Repair Inspection
- Expectations - Core Material - Damage - NDT Testing
- Questions • Composite Processing and - Ply Orientation - Assessment - Ultrasonic Presentation
- Layup - SRM Evaluation

5. ATR MODULAR
Introduction to Prepreg

MAINTENANCE
- Vacuum Bag - Damage Removal

TRAINING
• Introduction to fiber - Materials • Destructive Inspection of Test
- Reinforced - Special Precautions - Cure Cycle - Clean and Prep Panel
- Composite - Cure Cycles - Trim and Inspect - Drying Cycle
- Materials - Anita Hot Bonder - Repair Materials
• Review and Questions
- Thermocouples • Prepreg Layup Test - Core Repair Install
- Heat Blankets - Layup and Cure (Time Permitting) - Repair Ply install
• ATR Structure • Conclusion
- Uni-Directional Tape and Ply - Vacuum Bag
- General Description
- Cure Cycle

EQUIPMENT
6. TRAINING
Orientation
• ATR SRM
- Repair Environment
- Health & Safety
- Repair Materials
- Equipment

7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 43
 4.5 REPAIR AND ASSESSMENT DURATION

4.5.2 EWIS COURSE 3 TO 5

DAYS
1. OUR TRAINING
PHILOSOPHY

WHO IS ELIGIBLE? PROGRAMME

Technical staff dealing with any level of maintenance on aircraft electrical wiring,
2. MAINTENANCE

RATING PART 147

GROUP 1 & 2: 5 DAYS PROGRAMME

COURSES TYPE

maintenance, inspections, alterations or repairs on EWIS (Electrical Wiring

Interconnection System): DAY 1 DAY 2 DAY 3 DAY 4 DAY 5
• Group 1: Qualified staff performing EWIS maintenance - 5 day course duration
• Group 2: Qualified staff performing maintenance inspections on wiring systems - Wire
Zonal Inspection
5 day course duration Introduction
documentation
Damage
Inspection types
COURSES NON-PART 147 RATING NON-PART 147

• Group 3: Qualified staff performing electrical/avionic engineering on in-service SPM Human factor Connectors
3. MAINTENANCE

Safety procedure assessment

COURSES TYPE

WDM Cleaning repair

aircraft - 3 day course duration Tools Connector type,
Cables type, Contamination Exercises
Wire test identification
identification Prevention
Exercises
Participant must have a good knowledge of the English language. Exercices

OBJECTIVES
MAINTENANCE

• To adequately evaluate the aircraft electrical installation and effectively use the
4. OTHER

GROUP 3: 3 DAYS PROGRAMME

applicable aircraft wiring documentation.
DAY 1 DAY 2 DAY 3
• To ensure that proper procedures and practices are used when performing
maintenance actions so that the reliability of aircraft wiring is improved.
Wire documentation Inspection types
• To know the different types of inspection, human factors in inspection, zonal areas SPM
Zonal Inspection
Cleaning
5. ATR MODULAR
MAINTENANCE

and typical damage. Damage assessment

WDM Contamination
TRAINING

Connector type, identification

• To know the contamination sources, material, cleaning and protection procedure. Cables type, identification Prevention
• To know the procedure to identify, inspect and find the correct repair for typical
type of connective devices found on the airplane.
• To demonstrate and practice on different connection plugs, wires, using the
appropriate tools.
EQUIPMENT
6. TRAINING

COURSE OUTLINE
The course comprises a theoretical part taught by an instructor using course & SPM
documentation and a practical part.

DOCUMENTATION
7. GLOSSARY

• Maintenance Training Notes (MTN) in electronic format

8. GENERAL TERMS
AND CONDITIONS

44 Contact [email protected] for scheduling

 4.5 REPAIR AND ASSESSMENT DURATION

4.5.3 ATR 42/72 500/600 NON 1 TO 5

DESTRUCTIVE TESTING MODULE DAYS

1. OUR TRAINING
PHILOSOPHY
WHO IS ELIGIBLE? PROGRAMME
NDT inspectors Level 1, Level 2 or who want to gain experience for the NDT

2. MAINTENANCE

RATING PART 147

DAY 2 TO DAY 5

COURSES TYPE
certification.
DAY 1 according to the number of methods/
procedures to be reviewed2
Participants must have good knowledge of the English language.

OBJECTIVES Theoretical Part1: Practical Part2:

COURSES NON-PART 147 RATING NON-PART 147

General and Specific NDT reminder On Job Training on Aircraft

3. MAINTENANCE
COURSES TYPE
• To obtain or improve knowledge of the application of the NDTM (Non Destructive course
Testing Manual) procedures for ATR on all or some of the NDT methods used for • Eddy Current: HF, LF, Conductivity,
• General reminder course of the basic Thickness Meas., Rotating Probes.
the inspection of ATR aircraft. theory for main NDT methods: UT, ET,
PT. • Ultrasonics: engine nacelle, front spar,
rear spar, corrosion mapping, remaining
DOCUMENTATION • Specific course applied to ATR thickness meas, UT on composite
• Training course and ATR NDTM components based on the NDTM components.…

MAINTENANCE
procedures.

4. OTHER
• Penetrant on engine mount.

(1) Theoretical and practical part: 6 trainees max

(2) Contact ATR Training Center to define the content (methods/procedures) of such Practical Part

5. ATR MODULAR
MAINTENANCE
This course can be provided on the customer’s premises

TRAINING
Upon request ATR Training Center can provide:
• Level 1, 2 and 3 standard NDT trainings (for certification purpose) – EN4179 / NAS
410
• Specialised NDT trainings:

EQUIPMENT
6. TRAINING
- Digital X-rays
- Ultrasonic Immersion
- Ultrasonic Phased Array
- Eddy Current Array
- Composite Materials Inspection

7. GLOSSARY
- NDT initiation
- Materials Initiation
- Materials Advanced

8. GENERAL TERMS
AND CONDITIONS
Contact [email protected] for scheduling 45
 4.6 PREVENTIVE ACTIONS FOR MAINTENANCE OPERATIONS DURATION

4.6 PAMO COURSE 5 DAYS

1. OUR TRAINING
PHILOSOPHY

WHO IS ELIGIBLE? PROGRAMME

Line and Base Maintenance Engineers qualified for ATR that need to operate on
2. MAINTENANCE

RATING PART 147

COURSES TYPE

aircraft for line maintenance (ATR 500 & 600 series). DAY 1 DAY 2 DAY 3 DAY 4 DAY 5

OBJECTIVES
The course objective is to raise technicians awareness of preventive maintenance Theoretical Part Theoretical Part Theoretical Part Theoretical Part Theoretical Part
actions to take into account during aircraft line operation. These preventive actions
COURSES NON-PART 147 RATING NON-PART 147
3. MAINTENANCE
COURSES TYPE

can avoid system deterioration and improve a/c reliability.

COURSE OUTLINE
A few examples of preventive maintenance actions: Theoretical Part Theoretical Part Theoretical Part Theoretical Part Theoretical Part
• To avoid boots de-icing pneumatic deterioration and consequently leak fault, you
can use specific protection Aircraft visit 1h Aircraft visit 1h Aircraft visit 1h Aircraft visit 1h Aircraft visit 1h
• Cargo door proximity switches adjustment
MAINTENANCE

(if available) (if available) (if available) (if available) (if available)
4. OTHER

• Landing Gear (doors adjustment / cleaning / lubrication / preventive maintenance

inspection) PAMO course can be customised to follow customer needs (fleet performance
• Air Conditioning (check / cleaning / Heat exchanger) analysis)
• Propeller (packaging /cleaning / preventive maintenance)
• Engine (compressor / turbine washing and PWC recommendations)
5. ATR MODULAR
MAINTENANCE

• Electrical system (DC & AC generators inspection and cleaning)

TRAINING

• Lighting (lighting systems removal & installation recommendation)

• Walkaround focus points/ Towing & Servicing precaution / Packaging…
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

46 Contact [email protected] for scheduling

 5.
ATR MODULAR
MAINTENANCE
TRAINING
COURSES
Product catalogue 2018 – Issue 1

47
 5. ATR MODULAR MAINTENANCE TRAINING COURSES

5. ATR MODULAR MAINTENANCE

TRAINING COURSES
1. OUR TRAINING
PHILOSOPHY
PH

All our theoretical courses can be conducted on customer sites, provided that
customers comply with our Part 147 Maintenance requirements.
2. MAINTENANCE

RATING PART 147

COURSES TYPE

In addition, ATR Training Center’s sales department is able to quote any special
course package.

Note: for services in situ, in addition to the instructor lease fee, the instructor’s
47 RATING NON-PART 147
47

travel/living expenses,(including but not limited to a return flight ticket in business

3. MAINTENANCE
COURSES TYPE

class, hotel accommodation and living expenses) will be charged to the customer
by ATR Training Center and subjected to a 15% service charge.
COURSES NON-PART 147
MAINTENANCE
4. OTHER
5. ATR MODULAR
MAINTENANCE
TRAINING
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

48 Contact [email protected] for scheduling

 6.
TRAINING
EQUIPMENT
AND MULTIMEDIA
TRAINING TOOLS
Product catalogue 2018 – Issue 1

49
 6. TRAINING EQUIPMENT AND MULTIMEDIA TRAINING TOOLS

6.1 GENERAL
EQUIPMENT
1. OUR TRAINING
PHILOSOPHY
PH

E-LIBRARY FLIGHT PANEL TRAINER (FPT)

We offer our customers free of charge access to Personal Computers (PCs) We offer customers free of charge access to the FPT flight deck simulators,
2. MAINTENANCE

RATING PART 147

COURSES TYPE

containing the training modules and documentation developed by ATR/ATR highly sophisticated LCD touch panel based training devices that allow trainees
Training Center such as: to view and handle all panels, controls, indicators and displays within a complete
• ACOS and ACOS2 trainer free-play 2D flight deck environment.
• Upset recovery training module All Aircraft systems are fully simulated and the FPTs are capable of displaying
• Refueling panel training module characteristics of the actual aircraft. Panels are displayed and located in the correct
47 RATING NON-PART 147
47
3. MAINTENANCE

• “Cold Weather Conditions” training module position allowing panel location and cockpit flows/ scans to be taught and practised.
COURSES TYPE

• Performance training module All the scans, normal and abnormal procedures can be taught with this training
• Worldwide Electronic Jeppesen charts (e-link) equipment. In addition, it features full interactivity with Flight Deck simulation with
• Aircraft documentation the systems schematics displayed on two dedicated screens.
• Simulator Instructor Operating Station documentation
COURSES NON-PART 147

Systems Validation, Procedures Validation, Line Oriented Evaluations and Line

MAINTENANCE

Oriented Flight Training (LOFT) can be accomplished and practised in the FPT.
4. OTHER

High A/C systems simulation reliability identical to simulator quality provides highly
accurate and detailed representations of aircraft equipment.
Our FPT integrates computer hardware, PC stations, and graphics.
5. ATR MODULAR
MAINTENANCE

Currently, ATR operates the following Flat Panel Trainers (FPT): Virtual Hardware
TRAINING

Panel™ (VHP™), Virtual Procedure Trainers™ (VPT™) and Maintenance & Flight
Simulation Training Devices™ (MFSTD™).
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

50
 6. TRAINING EQUIPMENT AND MULTIMEDIA TRAINING TOOLS

6.2 ATR TRAINING CENTER

SIMULATORS

1. OUR TRAINING
PHILOSOPHY
ATR TRAINING CENTER SIMULATORS
Our simulators are capable of supporting Training Scenarios for Weather Radar, Password-protected for complete confidentiality, the Debriefing Station is proving

2. MAINTENANCE

RATING PART 147

to be an invaluable modern instructor tool for debriefing. It not only frees instructors

COURSES TYPE
Traffic Collision Avoidance Systems (TCAS change 7.0/7.1) and Enhanced Ground
Proximity Warning Systems (EGPWS). from having to take hand-written notes, but it also provides readily storable and
Every ATR Training Center Full Flight Simulator is fitted with a Debriefing Station reviewable records of training sessions as a whole, for later use.
which, with the accumulation of cockpit sound and video simulations, offers the The Debriefing Station is yet another strong motivator for choosing ATR Training
most comprehensive and accurate records and replays of key flight parameters, Center for your training needs !

47 RATING NON-PART 147

47
3. MAINTENANCE
such as the position of cockpit flight controls during the session.

COURSES TYPE
THE CURRENT TECHNICAL CONFIGURATION OF OUR TRAINING CENTERS IS:

COURSES NON-PART 147

TO U LO U S E PA R I S SINGAPORE

MAINTENANCE
4. OTHER
FPT FFS level ATR 72-212A FFS level
ATR 42-300 D (500) ATR 72-600
ATR 42-300 D
ATR 42-500 ATR 42-300
ATR 42-500 VPT™ ATR 72-212A
FFS level ATR 72-200 ATR 72-500 VPT™
FFT ATR 72-200 (500) MFSTD™ ATR 72-600
D ATR 72-212A
ATR 72-212A
(500) VHP™ ATR 72-600
(500)

5. ATR MODULAR
MAINTENANCE
ATR 72-600

TRAINING
MFSTD™ ATR 72-600

EQUIPMENT
6. TRAINING
JOHANNESBURG MIAMI

ATR 42-300 FFS level

ATR 42-500 ATR 72-600
D
Both standard and specific visuals are available on these devices. FFS level D ATR 72-200
ATR 72-212A MFSTD™ ATR 72-600
(500)

7. GLOSSARY
ATR 72-212A
VPT™
(500)

8. GENERAL TERMS
AND CONDITIONS
51
 6. TRAINING EQUIPMENT AND MULTIMEDIA TRAINING TOOLS

6.3 CBT (COMPUTER-BASED TRAINING)

ACOS/ACOS2, ATR COURSEWARE
1. OUR TRAINING
PHILOSOPHY
PH

As the contents of the ACOS are considered to be the minimum knowledge required Virtual checklists prompt the trainee to move the appropriate switch or lever; the
for ground crew working daily on ATR aircraft, ATR Training Center maintenance resulting effects can be seen on coupled system diagrams. A total of 35 hours of
2. MAINTENANCE

instructors will provide their own experience and knowledge and capitalise on the CBT for each aircraft variant is available in order to enable completion of the full
RATING PART 147
COURSES TYPE

convenience of using teaching material which can be shared with trainees. systems training for all ATR Type Ratings.
Dedicated modules for Recurrent Training are available as well.
The ATR 42/72 ACOS is a state-of the-art and ATR exclusive Computer Based
Training (CBT) programme for Pilots, A/C Maintenance Mechanics and Engineers, CABIN CREW
47 RATING NON-PART 147
47

and Cabin crews.

3. MAINTENANCE

The ATR Cabin crew courseware comprises the following modules:

COURSES TYPE

ACOS has been developed using Windows™-based multimedia tools incorporating

• Aircraft familiarisation
3D graphics and animation, as well as high quality digital photos to improve realism
• Aircraft systems and equipment
and training efficiency. Navigation throughout the courseware is easy since the
• Normal flight procedures
trainee can move forwards or backwards as required. Each section of the course is
• Emergency procedures
automatically “ticked off” to indicate completion.
COURSES NON-PART 147

It is a full multimedia product including real life pictures. The ATR Cabin crew CBT
All our products are provided with dedicated help documentation.
MAINTENANCE

includes 12 hours of theory tuition.

4. OTHER

COURSEWARE IS AVAILABLE FOR EACH OF THE FOLLOWING ATR AIRCRAFT

VERSIONS A/C MAINTENANCE MECHANICS & ENGINEERS
• ATR 42-300 • ATR 72-200 • ATR 42-600 The ATR CBT for A/C Maintenance Engineers describes all ATR A/C series and all
• ATR 42-500 • ATR 72-500 • ATR 72-600 types of mechanic and engineer qualifications (Electrical/Mechanical, Avionics). All
5. ATR MODULAR
MAINTENANCE

ATA chapters are covered at a EASA PART 66 level III specification. Specific modules
TRAINING

PILOT COURSES have been added, for examples, technical publications and aircraft structure.
The pilot course describes all ATR A/C series and all aircraft systems. The course Exercises are conducted by the individual trainee to perform testing/checks or
describes normal and abnormal operations in a practical and interactive way. It removal and installation. Introduction to troubleshooting practises is also included.
teaches all aircraft systems and other essentials. In total, 120 hours of CBT per aircraft variant are taught.
EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS

52
 1. OUR TRAINING
PHILOSOPHY
ACOS/ACOS2 INSTALLATION SUPPORT AND ASSISTANCE
COURSE OUTLINE

2. MAINTENANCE

RATING PART 147

COURSES TYPE
5 hours; including checks and advice to settle the technical prerequisites before
installation and support for installation
ASSISTANCE LEVEL 1
10 hours; including advanced checks and advice to settle the technical prerequisites
before installation and support for installation

COURSES NON-PART 147 RATING NON-PART 147

3. MAINTENANCE
COURSES TYPE
ASSISTANCE LEVEL 2 (2 DAYS)
• Advanced checks and advice to settle the technical prerequisites before
installation
• Remote full installation of the purchased tools by ATR
Note: Customer must have completed all the prerequisites

MAINTENANCE
ASSISTANCE LEVEL 3 (3 DAYS)

4. OTHER
• On-site advanced checks and advice to settle the technical prerequisites before
installation
• On-site full installation of the purchased tools by ATR

5. ATR MODULAR
Notes:

MAINTENANCE
TRAINING
- Customer must have completed all the prerequisites.
- Travel & accommodation excluded.
- 
The ACOS/ACOS² does not include any syllabus, it is the customer’s
responsibility to customize its own courses.

EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
53
 6. TRAINING EQUIPMENT AND MULTIMEDIA TRAINING TOOLS

6.4 3D TRAINERS
1. OUR TRAINING
PHILOSOPHY

ATR Training Center has developed unique 3D trainers, which are used daily by our ATR COMPONENT LOCATION SOFTWARE (ACLS)
students. These unrivalled tools allow the best training in all our training centers.
ATR Component Location Software
2. MAINTENANCE

RATING PART 147

COURSES TYPE

is a 3D computer-based training tool

ATR VIRTUAL CABIN PROCEDURE TRAINER (AVCPT) dedicated to maintenance staff training.
ATR Virtual Cabin Procedure Trainer The components are reproduced in a
is a 3D computer-based training 3D environment enabling the trainees
tool dedicated to cabin crew staff to locate their exact places in the
COURSES NON-PART 147 RATING NON-PART 147

training. Its aim is to apply operational Aircraft. They are also associated to
3. MAINTENANCE
COURSES TYPE

procedures in a 3D virtual environment their technical descriptions and linked

by interacting with the elements of the to the operational documentation.
Aircraft, as follows: This training tool is used for maintenance practical training and is recognised by
• The guided and semi-guided modes EASA authority as a MSTD (Maintenance Simulation Training Device).
help the trainee to understand the ATR Component Location Software is available for ATR 42-300, ATR 72-500,
MAINTENANCE

whole procedure step by step; ATR 42-600 and ATR 72-600 aircraft.
4. OTHER

• The free mode gives the ability to the trainee to test themselves and check their Note: ATR has developed a specific version of ACLS dedicated to its customers
own results. which is available for sale.
ATR Virtual Cabin Procedure Trainer is provided for ATR 72-600 aircraft and allows
to train on the 14 main cabin crew procedures. ATR VIRTUAL MAINTENANCE PROCEDURE TRAINER (AVMPT)
5. ATR MODULAR

This trainer is also available for sale.

MAINTENANCE

The AVMPT is a 3D computer-based

TRAINING

training tool dedicated to maintenance

ATR WALKAROUND TRAINER (AWT) staff training. Its aim is to apply
ATR Walkaround Trainer is a 3D operational procedures in a 3D virtual
computer-based training tool environment by interacting with the
reproducing the pre-flight check list elements of the Aircraft, as follows:
EQUIPMENT
6. TRAINING

done by pilots around the Aircraft • The guided and semi-guided modes
before every flight. This trainer is help the trainee to understand the
designed as follows: whole procedure step by step;
• The guided and semi-guided modes • The free mode gives the ability to the
help the trainee to understand the trainee to test themselves and check their own results.
7. GLOSSARY

whole procedure step by step;

• The free mode gives the ability to the trainee to test themselves and check their ATR Virtual Maintenance Procedure Trainer is available for ATR 42-300, ATR 72-500,
own results. ATR 42-600 and ATR 72-600 aircraft. It provides training on 30 procedures for each
A/C version.
ATR Walkaround Trainer is provided for ATR 42-300, ATR 72-500, ATR 42-600 and Note: This trainer is not available for sale.
8. GENERAL TERMS
AND CONDITIONS

ATR 72-600. This trainer is also available for sale.

54 Contact [email protected] for scheduling

 6. TRAINING EQUIPMENT AND MULTIMEDIA TRAINING TOOLS

6.5 PACKAGES

1. OUR TRAINING
PHILOSOPHY
The ATR Training Center Multimedia Training Tools can be purchased under the following packages:

2. MAINTENANCE

RATING PART 147

COURSES TYPE
LEGACY AIRCRAFT
GLASS COCKPIT AIRCRAFT
ATR 42-300/320/500
ATR 42/72-600
ATR 72-200/210/500
PILOT & ATTENDANT MAINTENANCE PILOT & ATTENDANT MAINTENANCE

COURSES NON-PART 147 RATING NON-PART 147

ACOS ACOS²

3. MAINTENANCE
COURSES TYPE
INITIAL Pilot: Type rating and ACOS Pilot: Type rating and ACOS²
PACKAGE Differences Course / Attendant: LBAS Differences Course / Attendant: (LBAS)
Complete Course Complete Course

ADDITIONAL 3D AWT ACLS AWT ACLS

PACKAGE 42-300, 72-500 42-300, 72-500 AVCPT 72-600 (72-600, 42-600)

MAINTENANCE
4. OTHER
ACOS ACOS²
Pilot: Type rating and ACOS (Pilot: Type rating and ACOS²
PREMIUM Differences Course / Attendant: LBAS Differences Course / Attendant: (LBAS)
PACKAGE Complete Course Complete Course

5. ATR MODULAR
ACLS ACLS

MAINTENANCE
TRAINING
AWT 42-300, 72-500 AWT (72-600, 42-600)
42-300, 72-500 AVCPT (72-600)

Note: the ACOS/ACOS² does not include any syllabus, it is the customer’s responsibility to customize its own courses.
ATR has developed a specific version of ACLS dedicated to its customers which is available for sale.

EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
55
 6. TRAINING EQUIPMENT AND MULTIMEDIA TRAINING TOOLS

6.6 PREREQUISITES
1. OUR TRAINING
PHILOSOPHY

The following prerequisites are available for the full range of ATR Training Center Multimedia Training tools.
PH

NETWORK CONFIGURATION
2. MAINTENANCE

RATING PART 147

COURSES TYPE

HARDWARE SOFTWARE

ITEM MINIMUM RECOMMENDED ITEM VERSION

1 000GB SAS or SATA @15.000 rpm or

Available disk space 500GB SAS or SATA @10.000 rpm
47 RATING NON-PART 147
47

Microsoft windows server 2003 SP2 - EN version

SERVER SIDE

greater
3. MAINTENANCE
COURSES TYPE

Processor Quad core 2Ghz Quad core 3Ghz or faster Operating System
Memory 8 GB RAM 16 GB RAM or greater Microsoft windows server 2008 R2 - EN version
Network Adapter Gigabit Ethernet card Gigabit Ethernet card
Web Browser Internet Explorer 8 or later
Processor Dual core 2 Ghz Quad core 3Ghz or faster
COURSES NON-PART 147

Flash Player 11 or later AND Silverlight 5.1 or

Plug ins
MAINTENANCE

CLIENT SIDE

Memory 2 GB RAM 4 GB RAM or greater later

4. OTHER

Network Adapter 10/100 Ethernet card Gigabit Ethernet card DirectX DirectX 9.0c or later
Compatible DirectX9 Shaders Model Compatible DirectX9 with support shaders Framework Framework .NET 3.5 or later
Graphic card 3.0 - 256 Mo RAM. 3.0 - 512 Mo RAM or greater - Ex: type
Ex: NVIDIA Geforce 6 NVIDIA Geforce FX, NVIDIA Geforce 6, etc) Web application Silverlight 5.1 or later
5. ATR MODULAR
MAINTENANCE

STAND ALONE CONFIGURATION

TRAINING

HARDWARE SOFTWARE
ITEM MINIMUM RECOMMENDED ITEM VERSION

Microsoft windows XP
EQUIPMENT
6. TRAINING

SERVER SIDE

All version
Operating System
Microsoft windows Seven
All versions

500 GB SAS or SATA @ Web Browser Internet Explorer 8 or later

7. GLOSSARY

Available disk space 250 GB SAS or SATA

10 000 RPM
Flash Player 11 or later AND Silverlight 5.1 or
Processor Dual core 2 Ghz Quad core 2Ghz or faster Plug ins
CLIENT SIDE

later
Memory 2 GB RAM 4 GB RAM or greater
DirectX DirectX 9.0c or later
Compatible DirectX9 with support shaders
Compatible DirectX9 Shaders Model
3.0 - 512 Mo RAM or greater
8. GENERAL TERMS

Framework Framework .NET 3.5 or later

AND CONDITIONS

Graphic card 3.0 - 256 Mo RAM.

Ex: type NVIDIA Geforce FX, NVIDIA Geforce
Ex: NVIDIA Geforce 6
6 ,etc

56
 6. TRAINING EQUIPMENT AND MULTIMEDIA TRAINING TOOLS

6.7 ATR TRAINING CENTER

MAINTENANCE TRAINING TOOLS

1. OUR TRAINING
PHILOSOPHY
FROM THEORETICAL TO PRACTICAL TRAINING
ATR has made training one of its priorities. From theoretical to practical training, our

2. MAINTENANCE
top-notch instructors ensure the best progress of our students thanks to modern

RATING PART 147

COURSES TYPE
facilities, state-of-the-art devices and unique tools.

CUTTING-EDGE COMPUTER-BASED APPLICATIONS

ALLOW THE BEST VIRTUAL TRAINING

47 RATING NON-PART 147

47
3. MAINTENANCE
• ATR Courseware (ACOS & ACOS2)

COURSES TYPE
• 3D Walkthrough (AWT)
• 3D Component Location (ACLS)
• 3D Virtual Maintenance Procedure (AVMPT)*

COURSES NON-PART 147

ULTRAMODERN TRAINING DEVICES ALLOW OUR

MAINTENANCE
4. OTHER
STUDENTS TO PERFORM COMPLETE MAINTENANCE
TASKS BEFORE PRACTISING ON AIRCRAFT
• Full Flight Simulators (FFS)
• Maintenance and Flight Simulation TrainersTM (MFSTDTM)

5. ATR MODULAR
MAINTENANCE
• Briefing and debriefing stations

TRAINING
OUR MODERN FACILITIES OFFER A TOTALLY UNRIVALED
TRAINING ENVIRONMENT THAT ONLY A MANUFACTURER
CAN PROVIDE

EQUIPMENT
6. TRAINING
• ATR Final Assembly Line
• Hangar PART 145
• Workshop
• High standard classrooms

7. GLOSSARY
8. GENERAL TERMS
AND CONDITIONS
57
 6. TRAINING EQUIPMENT AND MULTIMEDIA TRAINING TOOLS

6.8 MOBILE CLASSROOM

1. OUR TRAINING
PHILOSOPHY
PH
2. MAINTENANCE

RATING PART 147

COURSES TYPE

INNOVATIVE AND
ACTIVE TRAINING
47 RATING NON-PART 147
47
3. MAINTENANCE
COURSES TYPE

CUSTOMISED
TRAINING
COURSES NON-PART 147
MAINTENANCE
4. OTHER

OPERATIONALLY
5. ATR MODULAR
MAINTENANCE
TRAINING

ORIENTED TRAINING
EQUIPMENT
6. TRAINING

MOBILE CLASSROOM:
HOME BASED DEDICATED SOLUTION!
ATR Training Center offers high level education with
reduced costs (travel & accommodation).
7. GLOSSARY

Modern and innovative way to learn and highest

cost-cutting solution on the market!
8. GENERAL TERMS
AND CONDITIONS

58 Contact [email protected] for scheduling

 7.
GLOSSARY
Product catalogue 2018 – Issue 1

59
 7. GLOSSARY

7. GLOSSARY
1. OUR TRAINING
PHILOSOPHY
PH

A/C Aircraft CCAS Centralized Crew Alerting System FDM Flight Data Monitoring

AC L S ATR Component Location Software CCOM Cabin Crew Operations Manual FE/FI Flight Examiner/Instructor
2. MAINTENANCE

RATING PART 147

COURSES TYPE

ACOS ATR Courseware - Aircraft Certification Office CDL Configuration Deviation List FFS Full Flight Simulator
Subsystem
CMC Central Maintenance Computer FFT Full Flight Trainer
ADS-B Automatic Dependent Surveillance-Broadcast
CRM Crew Resource Management FH Flight Hours
47 RATING NON-PART 147
47

AFCS Automatic Flight Control System

3. MAINTENANCE
COURSES TYPE

DDG Dispatch Deviation Guide FIF Flight Instructor Familiarisation

AFM Airplane Flight Manual
DGAC Direction Générale de l'Aviation Civile FMS Flight Management System
AHM Airplane Health Management
EASA European Aviation Safety Agency FOS Flight Operations Software
AMM Aircraft Maintenance Manual
COURSES NON-PART 147

EDP Electronic Data Processing FPT Flat Panel Trainer

MAINTENANCE

AOC Airline Operational Control

4. OTHER

EFATO Engine Failure After TakeOff GNSS Global Navigation Satellite System
APM Aircraft Performance Monitoring
EFB Electronic Flight Bag GPU Ground Power Unit
ASM Aircraft Schematics Manual
EFIS Electronic Flight Instrument System IATA International Air Transport Association
5. ATR MODULAR

ATA Air Transport Association of America

MAINTENANCE
TRAINING

EGPWS Enhanced Ground Proximity Warning Systems ICAO International Civil Aviation Authority
ATO Approved Training Organisation
EIS Entry Into Service IPC Illustrated Parts Catalog
ATPL Airline Transport Pilot Licence
ELT Entry Level Training JIC Job Instruction Card
AVCPT ATR Virtual Cabin Procedure Trainer
EOSID Engine Out Standard Instrument Departure LBAS Line Base All System
EQUIPMENT
6. TRAINING

AVMPT ATR Virtual Maintenance Procedure Trainer

ERU Engine Run-Up LOFT Line Oriented Flight Training
AVS Avionics System
EWIS Electronic Wiring Interconnection System LPC License Proficiency Check
AWM Aircraft Wiring Manual
FAL Final Assembly Line LPV Localizer Performance with Vertical guidance
AWT ATR Walkaround Trainer
7. GLOSSARY

FAR Federal Aviation Regulations LRU Line Replaceable Unit

B-VNAV Baro-VNAV
FCOM Flight Crew Operating Manual MCC Multi Crew Coordination
CAA Civil Aviation Authority
FCTM Flight Crew Training Manual MCDU Multifunction Control Display Unit
CBT Computer-Based Training
8. GENERAL TERMS
AND CONDITIONS

Competency-Based Training FCU Fan Coil Unit MCF Maintenance Check Flight

60
 1. OUR TRAINING
PHILOSOPHY
MEL Minimum Equipment List SCAP Standard Computerized Airplane Performance

MFSTD™ Maintenance and Flight Simulation Training SFE/SFI Synthetic Flight Examiner/Instructor

2. MAINTENANCE

RATING PART 1477

COURSES TYPE
Device™
SID Standard Instrument Departure
MI Maintenance Instructor

MMEL Master Minimum Equipment List SOP Standard Operating Procedures

47 RATING NON-PART 147

47
MPC Multi-Purpose Computer SPM Standard Practices Manuals

3. MAINTENANCE
COURSES TYPE
MPD Maintenance Planning Document SPS Single-point Performance Software

MRBR Maintenance Review Board Report

SRM Structure Repair Manual
MTN Maintenance Training Notes

COURSES NON-PART 147

STD Synthetic Training Device

MAINTENANCE
MTOE Maintenance Training Organization and

4. OTHER
Exposition TCAS Traffic Collision Avoidance Systems

NDT Non Destructive Testing TEM Threat & Error Management

NSA National Supervisory Authority

TIS Trainee Information Sheet

5. ATR MODULAR
MAINTENANCE
OFP Operational Flight Plan

TRAINING
TRE/TRI Type Rating Examiner/Instructor
OPC Operators Proficiency Check
TSM TroubleShooting Manual
OSD Operational Suitability Data Report
UPRT Upset Prevention and Recovery Training
PART FCL Flight Crew License

EQUIPMENT
QUIPMENT
IPMENT
6. TRAINING
VCPT Virtual Cabin Procedure Trainer
PBM Pre-Broadcast Monitoring

PBN Performance-Based Navigation VHP™ Virtual Hardware Panel™

PIC Pilot In Command VMPT Virtual Maintenance Procedure Trainer

7. GLOSSARY
PPH Policy & Procedures Handbook VPT™ Virtual Procedure Trainer™

G OSS
QAR Quick Access Recorder
WBM Weight and Balance Manual
QRH Quick Reference Handbook
WBT Web Based Training
RNP-AR Required Navigation Performance - Authorization

8. GENERAL TERMS
AND CONDITIONS
Required WDM Wiring Diagram Manual

Thank you for contacting [email protected] for scheduling 61

 8.
GENERAL
TERMS AND
CONDITIONS
Product catalogue 2018 – Issue 1

63
 8. GENERAL TERMS AND CONDITIONS OF SALE FOR THE SUPPLY OF TRAINING & SERVICES

8. DRY & WET

TRAINING & SERVICES
1. OUR TRAINING
PHILOSOPHY

Unless otherwise agreed in writing by both Parties, these General Terms and Conditions shall apply in respect of any quotation i. When it directly or indirectly holds a fraction of the capital
issued by ATR Training Center, and/or Agreement in relation to the sale of Services. Any silence from ATR Training Center related that gives it a majority of the voting rights at that compa-
to any provisions of any documents emanating from the Customer shall not be interpreted as a waiver by ATR Training Center of ny’s general meetings;
the present General Terms and ConditionsThese General Terms and Conditions form an integral part of the Agreement and shall
2. MAINTENANCE

RATING PART 147

ii. When it alone holds a majority of the voting rights in that

COURSES TYPE

take precedence over any document and/or provision emanating from the Customer or implied by law, trade custom, practice or company by virtue of an agreement entered into with
course of dealing regarding the same subject matter in the case that such provisions are in contradiction with the present General other partners or shareholders and this is not contrary to
Terms and Conditions. The Customer’s silence or use of Services constitutes its acceptance to these General Terms and Conditions. the company’s interests;
iii. When it effectively determines the decisions taken at
CONTENTS 1. DEFINITIONS - INTERPRETATION -
COURSES NON-PART 147 RATING NON-PART 147

that company’s general meetings through the voting

ORDER OF PRECEDENCE
3. MAINTENANCE
COURSES TYPE

1. Definitions - Interpretation - Order of precedence....... 74 rights it holds;

2. Supply of training services............................................ 76 1.1. Definition iv. When it is a partner in, or shareholder of, that company
3. Administrative conditions............................................. 76 and has the power to appoint or dismiss the majority of
Unless otherwise defined, capitalized terms, singular or plu-
4. Course qualification........................................................ 76 the members of that company’s administrative, manage-
ral, used in these General Terms and Conditions shall have
ment or supervisory structures.
5. Training equipment......................................................... 76 the meaning set out below:
II. It is presumed to exercise such control when it directly or
6. Prices.................................................................................. 77
MAINTENANCE

“Affiliate” means, with respect to any entity, any entity Controlled indirectly holds a fraction of the voting rights above 40%
4. OTHER

7. Taxes................................................................................... 77
by, Controlling or under Common Control with, the first entity. and no other partner or shareholder directly or indirectly
8. Payments........................................................................... 77
holds a fraction larger than its own.
9. Cancellation of training services.................................... 78 “Agreement” means any agreement entered into by the Par-
III. For the purposes of the same sections of the present chap-
10. Intellectual property.................................................... 78 ties under these General Terms and Conditions when (i) a
ter, two or more companies acting jointly are deemed to
11. Confidentiality............................................................... 79 quotation made by ATR Training Center is accepted by the
5. ATR MODULAR
MAINTENANCE

jointly control another company when they effectively de-

Customer or (ii) an Order is accepted by ATR Training Center
TRAINING

12. Termination.................................................................... 79 termine the decisions taken at its general meetings.”

or (iii) any other document that makes reference to the Or-
13. Excusable delay............................................................ 80
der or is referred to by the Order accepted by ATR Training “Customer” means a company or a person purchasing the
14. Hardship.......................................................................... 80
Center, including the Specific Conditions. Services from ATR Training Center.
15. Liability and disclaimer............................................... 80
16. Indemnity....................................................................... 81 “ATR” means “Avions de Transport Regional” GIE, a “Groupe- “Day(s)” means calendar day(s).
ment d’Intérêt Economique” established under the laws of
EQUIPMENT
6. TRAINING

17. Insurance......................................................................... 81
France, identified under n° 323 932 236 RCS (Trade Reg- “Default” means when a Party fails to execute any of its ma-
18. Export control................................................................ 82
ister) Toulouse, with its registered office located at 1, allée terial obligations under the Agreement and does not reme-
19. Severability.................................................................... 82
Pierre Nadot, 31712 Blagnac Cedex, France or any other de- dy the same within ten (10) Days (or such extended period
20. Entire agreement.......................................................... 82
tails, address and/or successor’s and/or assignee’s details to granted by the non-defaulting Party within the hereafter No-
21. Survival............................................................................ 82 tice), as receipt of a Notice of default from the non-default-
be communicated by ATR Training Center from time to time.
22. Notices............................................................................ 82
7. GLOSSARY

ing Party. Will be deemed as material obligations without the

23. Assignment of contract............................................... 83 “Confidential Information” has the meaning set forth in
following being exhaustive:
24. Sub-contracting............................................................. 83 Clause 11 of these General Terms and Conditions.
i. any Customer’s payment obligations;
25. No waiver....................................................................... 83 “Controlled by”, “Controlling”, “Common Control” are ii. any Customer’s insurance obligations as per Clause 17
26. Law / jurisdiction.......................................................... 83 to be interpreted in accordance with article L.233-3 of the (“Insurances”);
8. GENERAL TERMS
AND CONDITIONS

27. Immunity......................................................................... 83 French Commercial Code which provides: iii. any Party’s obligations which by its nature and/or con-
28. Costs and expenses...................................................... 83 I. A company is deemed to control another company: text is intended to be material.

64
 1. OUR TRAINING
PHILOSOPHY
“Dry Training” means the use by the Customer of the Train- “Price List” means the list of prices charged by ATR Training “Training & Services” means DRY Training and/or Wet
ing Equipment, in the course of the Dry Training programme. Center to the Customer and enclosed in the ATR Training Training related to the use of the Training Equipment or any
Center price catalogue. other Services provided by ATR Training Center.
“FFS” means a Full Flight Simulator.

2. MAINTENANCE

RATING PART 147

COURSES TYPE
“Sale and Purchase Agreement” or “SPA” means the agree- “Training & Services Agreement” or “TSA” means the
“General Terms and Conditions” means these “ATR Training
ment between the Customer and ATR for the sale of ATR air- agreement between the Customer and ATR Training Center
Center General Terms and Conditions of Sale for the Supply
craft, providing for the conditions of the Training Services. providing the specific conditions of the Training & Services.
of Training Services - Dry and Wet Training Services”, which
The General Terms and Conditions apply to the TSA.
form an integral part of the Agreement and unless otherwise “Services” means the Training Services and/or Materials
provided by the Parties, shall take precedence over and ex- supplied by ATR Training Center and offered to or required “Wet Training” means the use of Training Equipment

COURSES NON-PART 147 RATING NON-PART 147

3. MAINTENANCE
clude any other terms and conditions appearing or referred by the Customer. and the purchase of training courses taught by Training

COURSES TYPE
to in any acceptance form, purchase order, Customer’s gen- Instructors.
“Specific Conditions” means the SPA, the TSA and/or any
eral or specific terms and conditions, or other document or
provisions differing from or completing these General Terms 1.2. Interpretation and order of precedence
letter emanating from the Customer or implied by law, trade
and Conditions, appended by ATR Training Center to (i) its
custom, practice or course of dealing, regarding the same 1.2.1. In these General Terms and Conditions save as other-
quotation, and/or to (ii) any agreement referred to by the
subject matter. wise expressly indicated to the contrary, any reference to:
quotation or referring to the quotation, that has been ex-

MAINTENANCE
1.2.1.1. “law” includes any law, order, statute, statutory in-

4. OTHER
“Intellectual Property Right(s)” or “IP Right(s)” means pressly entered into by both Parties, such as a letter of en-
strument, regulation, decree, directive or instrument
without limitation, ATR Training Center’s copyright, regis- gagement or the like, which shall prevail on any provision of
of equivalent effect;
tered and unregistered design rights, moral rights, patents these General Terms and Conditions, as relevant.
1.2.1.2. the singular includes the plural and vice versa (un-
and patent applications, registered and unregistered trade-
“Taxes” has the meaning set forth in Clause 7 of these less the context otherwise requires) and references
marks, including any applications for the same, registered
General Terms and Conditions. to a gender includes all genders;

5. ATR MODULAR
MAINTENANCE
and unregistered drawings, specifications, proprietary in-
1.2.1.3. headings are for convenience only and shall not

TRAINING
formation, trade secrets, know-how, rights of confidentiality “Trainee” means an individual undergoing training conduct-
govern the interpretation of the Agreement and/or
and other rights of a like nature throughout the world. ed by ATR Training Center under an Agreement between
these General Terms and Conditions;
“Materials” means training materials and documentation as may ATR Training Center and the Customer for that person.
1.2.1.4. “including”, “include” shall be construed as a refer-
be supplied by ATR Training Center to the trainees attending the “Training Center” means ATR Training Center premises lo- ence to: “… including, without limitation,…” or “…
Training Services. cated at Blagnac, France or any ATR Training Center premis- including but not limited to…”.

EQUIPMENT
6. TRAINING
“Notice” has the meaning set forth in Clause 22 of these es all over the world such as ATR Training Center Singapore, 1.2.2. Order of precedence: in the event of contradiction
General Terms and Conditions. ATR Training Center Paris, ATR Training Center Johannes- and/or incompatibility between the following documents,
burg, ATR Training Center Miami or any other ATR Affiliate the order of precedence between them shall be as follows:
“Order” means any written request for Services made by the
offering Training & Services in accordance with ATR Training i. any confirmation and/or reminder sent by ATR Training
Customer and sent to ATR Training Center. Any Order shall
Center’s training standards and policy, as relevant. Center to the Customer through e-mail or any other
be deemed to be made under the General Terms and Con-

7. GLOSSARY
ditions. “Training Equipment” means a flight training device, a flight document issued by ATR Training Center in relation with
the Agreement;
“Party(ies)” means individually or collectively, as the context simulator (including the FFS) and/or any equipment used to
ii. the Agreement;
requires, ATR Training Center and/or the Customer. provide Training Services for ATR aircraft.
iii. these General Terms and Conditions.
“Payment in advance” or “PIA” means payment of Price “Training Instructors” means qualified Type Rating Instruc-

8. GENERAL TERMS
AND CONDITIONS
by the Customer to ATR Training Center prior to the perfor- tors, Type Rating Examiners, Ground Instructors and/or Sim-
mance of the Services. ulator Flight Instructors.

65
 8. GENERAL TERMS AND CONDITIONS OF SALE FOR THE SUPPLY OF TRAINING & SERVICES

8. DRY & WET

TRAINING & SERVICES
1. OUR TRAINING
PHILOSOPHY

2. SUPPLY OF TRAINING SERVICES 3.2. The Customer shall ensure that any of its Trainees at- 3.4.4. In case of emergency, Trainees’ medical care may be
tending the Training Services shall comply with all regula- assumed by ATR Training Center. All payments of medical
2.1. ATR Training Center shall make its reasonable endeavors care bills advanced by ATR Training Center shall be charged
tions, government restrictions and internal rules applicable
to (i) comply with the date of completion of the Training Ser- to the Customer pursuant to clause 8.6 hereafter.
2. MAINTENANCE

RATING PART 147

to the relevant Training Center, which shall include any

COURSES TYPE

vices and (ii) to provide the Customer with the Training Equip-
applicable security, health and safety regulations. ATR Train- 4. COURSE QUALIFICATION
ment and the Training Instructors (subject to their availability).
ing Center internal rules are at Trainees’ disposal within the
2.2. A Dry Training programme (including simulator ses- relevant Training Center (ATR Training Center or Training 4.1. All Materials are in English and training courses taught
sion timings) will be sent to the Customer at least thirty (30) Center Welcome brochure). in English. The Customer’s Trainees shall be able to fully un-
Days prior to the Services starting date. The Trainees shall derstand written and spoken English.
COURSES NON-PART 147 RATING NON-PART 147

3.3. Group leader: the Customer shall name a group leader

3. MAINTENANCE
COURSES TYPE

check the precise scheduled time of the Training Equipment 4.2. Any Trainee assigned by the Customer to attend the
availability at ATR Training Center’s or the relevant Training among each group of Trainees and shall indicate his name
Training Services shall have the type rating pre-requisites
Center’s front, before the beginning of the training courses. on the Trainees’ list. The group leader shall immediately re-
conditions on turbo prop aircraft; the Customer must return
port to the ATR Training Center reception desk any abnor-
2.3. A Wet Training programme will be sent to the Customer to ATR Training Center, at least forty five (45) Days prior to
mal event that may occur during the performance of the
at least ten (10) Days prior to the Services starting date. The the course starts, the Trainee Information Sheet (“TIS”) filled
Training Services.
Trainees shall check the precise scheduled time of the train- with type rating pre-requisites information.
MAINTENANCE

ing courses at ATR Training Center’s or the relevant Training 3.4. Accommodation, transportation and medical fees
4. OTHER

4.3. If any Trainee does not reach the conditions set out in
Center’s front, before the beginning of the training courses
3.4.1. At Customer’s request, ATR Training Center may assist clauses 4.1 and 4.2, ATR Training Center shall be entitled to
the Customer with booking a rental car, at the preferential ATR terminate the Training Services with respect to such Trainee
Training Center corporate rate. without incurring any prejudice and/or liability.
3. ADMINISTRATIVE CONDITIONS
4.4. ATR Training Center shall not be liable as to any insuffi-
5. ATR MODULAR
MAINTENANCE

3.1. Trainees arrival: the Customer shall advise ATR Training 3.4.2. When necessary, drivers shall hold an international
TRAINING

driving license. All rental related expenses shall be at Cus- ciency resulting from the Trainees’ level of knowledge by the
Center no later than two (2) weeks before the Trainees arrive at
end of the Training Services.
the Training Center. Upon their arrival at the Training Center, the tomer’s charge. The Customer shall assume all risk, loss or
Trainees will receive a training programme with the scheduled liability arising out of or directly or indirectly connected with
Training Equipment availability and/or the scheduled training the use of the rental car; and more particularly the death of
or injury caused to any third party or to any Trainee.
5. TRAINING EQUIPMENT
courses, as relevant. In the event of Trainee’s arrival to the
EQUIPMENT
6. TRAINING

Training Center without reservation of the training session due 5.1. The Training Equipment provided by ATR Training
3.4.3. All living expenses shall be at Customer’s charge.
to a schedule error committed on account of whether the Center shall be in operating conditions.
Upon written request from the Customer, ATR Training
Customer or ATR Training Center, the latter shall make its rea-
Center may assist the Customer in making hotel bookings 5.2. The Customer shall promptly advise ATR Training
sonable endeavors to perform the ordered Services to the
for Trainees on behalf of the Customer. The Customer shall Center of any technical default, breakdown or malfunction
Trainee, provided that the Training Equipment and Training
send directly to the hotel(s) a deposit amounted to the to- in the operation of the Training Equipment.
Instructors are available for the aforesaid training session. The
7. GLOSSARY

Customer agrees that the Services provided by ATR Training tal estimated cost to confirm the hotel booking. In no event 5.3. Aircraft supply: unless otherwise agreed, any aircraft used
Center to the Trainee in such conditions, despite the above- shall ATR Training Center pay any expenses with regards to for the Training Services shall be the Customer’s aircraft. Upon
mentioned schedule error, shall be considered by the Cus- the hotel booking or any other additional fee, which have request from the Customer, ATR Training Center may lease
tomer as an agreed period for supply of the Services as it to be borne by the Customer. In no event shall ATR Train- an ATR aircraft in order to complete the Training Services in
would have been set out in the Dry Training programme and/ ing Center be liable for any consequence arising out of or accordance with ATR Training Center Price List, and subject
8. GENERAL TERMS
AND CONDITIONS

or Wet Training programme sent to Customer in accordance in connection with the assistance provided by ATR Training to the availability of such aircraft. Any Costs (including fuel,
with clauses 2.2 and 2.3 here above. Center relating to the Customer living facilities. maintenance, support, landing fees and all other operating

66
 1. OUR TRAINING
PHILOSOPHY
expenses) will be paid directly by the Customer or charged 6.2. Quotations in a currency other than Euros are based on Center all reasonable travel, accommodation, subsistence
thereafter to the Customer in accordance with ATR Training the exchange’s rate in force at the time of quoting and unless and other expenses incurred by ATR Training Center’s rep-
Center Price List. Clause 17 (“Insurance”) shall apply to the otherwise stated, the price may at ATR Training Center’s dis- resentatives in the course of the supply of Services. Where
aircraft supply for the performance of the Training Services. cretion be subject to revision up or down if any different rate appropriate, such expenses shall include business class air

2. MAINTENANCE

RATING PART 147

COURSES TYPE
of exchange shall apply at the date of invoice. travel. All such expenses shall be subject to a standard fif-
5.4. Training Equipment session: if during a Training Equip-
teen (10) % handling charge.
ment session, a technical default occurs which renders said 6.3. Any price specifically stipulated by ATR Training Center in
Training Equipment inoperative, the session shall be com- a quotation and before any request for Services based on this
pleted as soon it shall be serviceable and: quotation have been received by ATR Training Center, will re-
7. TAXES

COURSES NON-PART 147 RATING NON-PART 147

i. If the failure lasts less than fifteen (15) minutes main in force for ninety (90) Days from the date of its issuance,

3. MAINTENANCE
COURSES TYPE
The session may be extended for a duration equal to the unless another period is specified in the quotation or in the The Customer shall be liable for, indemnify and hold ATR
duration of the technical default. Agreement. However, ATR Training Center shall be entitled to Training Center free and harmless from any taxes, charges,
ii. If the failure lasts more than fifteen (15) minutes cancel such quotation or any offer, at any time prior to the ac- duties and/or other assessments (the “Taxes”), including in-
The time lost may be recovered by contacting ATR Train- ceptance of the Customer. The Price List shall remain valid until terests and penalties , arising out of or connected with the
ing Center scheduling office, provided that a time-slot can a published change in that Price List is advised. Any ordered execution of the Agreement and imposed by any govern-
be found within the published simulator programme. ATR Services accepted by ATR Training Center but not performed ment or authority (not being the French government or a

MAINTENANCE
Training Center shall make its reasonable endeavors to before such change, shall be invoiced on the basis of the Price French authority). Should ATR Training Center be obliged to

4. OTHER
provide such a time-slot to complete the interrupted ses- List in force on the date of acceptance of the Order by ATR pay such Taxes, the Customer shall reimburse said Taxes to
sion, and shall not be liable for any consequences relating Training Center. ATR Training Center within fifteen (15) days after ATR Train-
to the scheduling of a new session. ing Center’s request, pursuant to Clause 8.6 hereafter.
6.4. In the event, the Training Services price is varied in ac-
5.5. Remedial Training: during the Training Services, the Cus- cordance with clause 6.2, such price shall be binding on both

5. ATR MODULAR
MAINTENANCE
tomer or ATR Training Center may request additional remedi- Parties and shall not give either Party any right of cancellation. 8. PAYMENTS

TRAINING
al training (in classroom and/or on Training Equipment). The
schedule, duration and cost of such remedial training will be 6.5. In accordance with clause 7 (“Taxes”), the price is exclu- 8.1. Unless otherwise required by ATR Training Center, ATR
mutually agreed upon between the Customer and ATR Train- sive of all taxes and duties which shall be paid by the Cus- Training Center shall provide the Customer with invoices
ing Center. tomer with the invoice, without delay. showing any sums due under the Agreement at the end of
each Training Service. Unless otherwise stipulated by ATR
5.6. End of the Training Services: upon completion of the 6.6. Notwithstanding any other provision under these Gen-

EQUIPMENT
6. TRAINING
Training Center, all payments due thereunder shall be made
Training Services, ATR Training Center shall deliver a certif- eral Terms and Conditions, ATR Training Center may revise
by the Customer in the appropriate currency designated
icate of course completion to each Trainee, in accordance the price to take into account any variation in the cost of la-
pursuant to clause 6 (“Prices”) to the following ATR Training
with the prerequisites for issuance of such certificate. In the bor, materials, fuel, power and transport or any additional
Center’s nominated bank account:
event such prerequisites are not met, ATR Training Center cost resulting from any increase in all or any of such costs
shall deliver a certificate of course attendance. or resulting from the modification of the Training Services
required by any change in any statutory obligations or any Société Bordelaise de Crédit Industriel et Commercial (SBCIC)

7. GLOSSARY
requirements of any Appropriate Authority prior to the com- 20 rue des Arts, 31000, Toulouse (France)
6. PRICES pletion of the Training Services. ATR Training Center shall Account: 00040041401-03
notify such revision to the Customer as soon as reasonably IBAN: FR 7610057190480004004140103
6.1. Prices and currency applicable to the Training Servic-
practicable. Bank code: 10057
es are as indicated in the relevant ATR Training Center Price
Branch code: 19048 SWIFT

8. GENERAL TERMS
AND CONDITIONS
List or if different, as specifically stipulated by ATR Training 6.7. If the place of supply of the Services is other than at
BIC: CMCIFRPP
Center in the Agreement. Training Center, the Customer shall reimburse ATR Training

67
 8. GENERAL TERMS AND CONDITIONS OF SALE FOR THE SUPPLY OF TRAINING & SERVICES

8. DRY & WET

TRAINING & SERVICES
1. OUR TRAINING
PHILOSOPHY

All payments shall be made no later than the 30th day fol- recovery costs; ATR Training Center being entitled to claim Amount
Date of notice served to ATR Training Center
lowing the dispatch of ATR Training Center invoice (“Pay- for any additional recovery costs. Such interest rate and charged to the
(before scheduled starting date)
ment Date”), unless some other period is specified in the compensation shall be automatically due from the first Day Customer
Agreement. of late payment and supersedes all previous rates. Less or equal than 7 calendar days 100% of full cost
2. MAINTENANCE

RATING PART 147

COURSES TYPE

Unless otherwise agreed by the Parties, all payments shall be 8.5. Notwithstanding the above, ATR Training Center is en- More than 7 and less or equal than 14 calendar days 75 % of full cost
made in full, without set-off, counterclaim, deduction or with- titled to assign the right to recover the Customer’s debt to
holding of any kind. Where applicable according to the law, the any third party. In that case, Clauses 8.3 and 8.4 shall apply More than 14 and less or equal than 21 calendar days 50 % of full cost
Customer shall pay all taxes applicable to the sale of Services. to that third party.
More than 21 and less or equal than 28 calendar days 25% of full cost
COURSES NON-PART 147 RATING NON-PART 147

8.2. In the event: 8.6. All payments advanced by ATR Training Center, in-
3. MAINTENANCE
COURSES TYPE

More than 28 calendar days No charge

(a) the Customer fails to pay and/or delays any amount, even cluding pursuant to clauses 3.4.4 and 7 here above, shall
partially, under the Agreement; and/or, be charged thereafter to the Customer, subject to a fifteen
(10)% handling charge.
(b) ATR Training Center has reasonable doubt (i) as to Cus-
tomer’s credit worthiness and/or (ii) to believe that it will 8.7. Quotation / Invoice error: in the event, the Customer has 10. INTELLECTUAL PROPERTY
not receive any payment in due time, reasonable beliefs an error has been made in quotation and/
10.1. ATR Training Center holds and/or is sub-licensed with
MAINTENANCE

or invoices issued by ATR Training Center, it shall notice the

respect to IP Rights related to the Materials and the Services
4. OTHER

ATR Training Center, without prejudice to rights it may have latter at the latest sixty (60) Days after the invoice issuance
at law and/or under the Agreement, shall be entitled to (i) supplied to the Trainees under this Agreement. This Materials
date; no claim shall be considered beyond said time period
alter the terms of payment (including PIA requirement) in here above referred. and Services shall be exclusively used within the scope of the
its sole discretion and without prior Notice to the Customer Unless otherwise provided under the Agreement and/or Agreement.
and/or (ii) make any and all amounts due under the Agree- these General Terms and Conditions: i. Nothing in the Agreement shall have the effect of granting
5. ATR MODULAR
MAINTENANCE

ment immediately due and payable and/or (iii) suspend and/ - in case of error confirmed by ATR Training Center, the latter and/or transferring to, or vesting in, the Customer any IP
TRAINING

or terminate all or part of any Orders, Services or Agreement shall correct forthwith the quotation and/or the invoice to Rights in or to any Materials and/or Services. The Custom-
(in accordance with Clause 12 (“Termination”). adjust its amount. In compliance with said corrected quota- er acknowledges and agrees that IP Rights in any work or
tion / invoice, ATR Training Center shall then issue a credit deliverable Materials arising from or created, produced or
8.3. Time for making all payments due to ATR Training note to the Customer or the Customer shall pay an addition- developed by ATR Training Center shall immediately upon
Center hereunder by the Customer shall be of the essence. al amount, as relevant; or, creation or performance, vest in and shall be and remain
Any additional costs and expenses of whatever nature in- - in case of no error is confirmed by ATR Training Center and/ the sole and exclusive property of ATR Training Center (or
EQUIPMENT
6. TRAINING

curred by ATR Training Center as a result of Customer’s fail- or the Customer caused such error, ATR Training Center where appropriate any of their supplier/licensors) and the
ure to make payments on time pursuant to this clause 8.3 shall be entitled to charge the Customer with any reasona-
Customer shall acquire no right, title or interest in or to the
thereof shall be borne by the Customer. ble expenses and time incurred during investigations.
same except as expressly stated in the Agreement.
8.4. Without prejudice to any other of ATR Training Center’s ii. Notwithstanding the foregoing, any IP Rights license
rights or remedies, if the Customer fails to make any pay- granted to the Customer by ATR Training Center is only
9. CANCELLATION OR POSTPONMENT
7. GLOSSARY

ments within thirty (30) Days after the Payment Date, the made in connection with the Materials and/or Servic-
Customer shall in addition to payment of the price, pay (i) OF TRAINING SERVICES es, and for the exclusive purpose provided under the
a penalty interest worked out at the interest rate published
In the event of cancellation or postponement of any ordered Agreement and for the own Customer’s use.
by the European Central Bank in force at the due date in-
creased by ten (10) points of percentage (without being less Training Services by the Customer, ATR Training Center shall iii. The Customer agrees not to infringe upon, in any way
than three (3) times the French legal interest rate in force at be entitled to charge the Customer with the payment of a whatsoever, the IP Rights and other rights held by ATR
8. GENERAL TERMS
AND CONDITIONS

the due date or higher rate permitted by applicable law); percentage of the full cost of the cancelled Services, on a Training Center (or where appropriate, any of their sup-
and (ii) a fixed sum of forty (40) Euros for compensation of sliding scale as described below: plier/licensors).

68
 1. OUR TRAINING
PHILOSOPHY
iv.  The Customer undertakes to bring to ATR Training i. to each Party’s respective professional advisors having b) Other Party’s Default;
Center’s attention, with no delay, any improper use of a business need to know, provided that such third party c) Excusable delay: in accordance with Clause 13.5;
IP Rights, which comes to its acknowledgment; the Cus- receiving the Confidential Information shall agree not to d) Late payment: if the Customer fails to make any pay-
tomer shall use its reasonable efforts to safeguard such disclose such, to treat such Confidential Information as ments within thirty (30) days after the Payment Date;

2. MAINTENANCE

RATING PART 147

COURSES TYPE
IP Rights and assist ATR Training Center, at its request, in strictly confidential and to observe the hereunder condi- e) ATR Training Center has reasonable doubt (i) as to Cus-
taking steps to defend such IP Rights. tions of confidentiality; and/or tomer’s credit worthiness and/or (ii) to believe that it will
v. In case of the purchase of a data package for the use of ii. as may be required by applicable laws or regulations to not receive any payment in due time;
a simulator, a licence agreement specifically for this pur- carry out its obligations under the Agreement. In such
f) Export control: in compliance with Clause 18 (“Export
pose shall be signed between ATR Training Center and event, the receiving Party shall use its best endeavours
Control”).

COURSES NON-PART 147 RATING NON-PART 147

to limit the disclosure of the Confidential Information to

3. MAINTENANCE
the owner of the simulator.

COURSES TYPE
the extent legally permissible. In any case, and prior to 12.2. Suspension procedure: in addition to Clause 12.1, in
10.2. In any case, ATR Training Center shall not be respons- such disclosure, the Parties shall jointly review and agree the event of Customer’s Default, ATR Training Center shall be
ible for any consequences, damages, whether direct or indi- on the General Terms and Conditions of the document entitled to suspend all or part of any Order, Services and/or
rect, which may result from using the documentation and/or to be filed or disclosed. any Agreement and/or any other agreement entered into by
IP Rights in another purpose than using the Training Services and between the Customer and ATR Training Center, by way
11.3. The Customer agrees not to duplicate the Confiden-
in compliance with the Agreement. of Notice of suspension to the Customer which shall specify:
tial Information nor to copy or reproduce the same beyond

MAINTENANCE
i. Orders, Services and/or Agreement and/or aforesaid agree-

4. OTHER
the limited purpose of the Agreement.
ment for which such suspension shall be effective; and,
11. CONFIDENTIALITY ii. the period during which such suspension shall be in force
11.1. The provisions of the Agreement and any information 12. TERMINATION (i.e. until the failure and/or the credit of the Customer are
in relation thereto, including all information contained in the remedied or any other period granted by ATR Training
12.1. Without prejudice to any other rights under the Agree-

5. ATR MODULAR
MAINTENANCE
Materials, irrespective of its support, the method of trans- Center); and/or,

TRAINING
mission and its origin, including data, drawings, designs, ment and/or at law, the following terms and conditions of iii. Orders, Services (pending and/or placed as from the No-
test results, specifications, processes, know-how, concepts, termination shall apply: tice of suspension) and/or Agreement and/or aforesaid
programmes, computer software, manufacturing informa- 12.1.1. Hardship: ATR Training Center shall be entitled to ter- agreement, for which PIA (and/or any additional condi-
tion, information on inventions, processes, improvements, tions to be agreed upon by the Parties) shall be applicable.
minate all or part of the Agreement by way of Notice of ter-
technical advices, financial, marketing, legal or commercial For the sake of clarity, such Notice of suspension shall not be
mination, as per Clause 12.2 (“Termination procedure”), in the
information, human resources information, business plans,
construed as a waiver of (i) Customer’s obligation to perform

EQUIPMENT
6. TRAINING
event no settlement is reached as per Clause 14 (“Hardship”).
product plans, costs and which:
any of its obligations under the Agreement and/or aforesaid
i. are identified or not by the disclosing Party as confidential; or, 12.1.2. Either Party shall be entitled to terminate all or part of
ii. by its nature warrants confidential treatment; and, agreement, (ii) ATR Training Center’s right to enforce any of
the Agreement by way of Notice of termination as per Clause
iii. are related to or in any way connected with the purpose Customer’s obligations and/or (iii) ATR Training Center’s right
12.3 (“Termination procedure”), in the following events:
of the Agreement; and, to terminate the Agreement in accordance with this Clause
a) Insolvency: to the extent permitted by law, if the other
iv. are communicated by the disclosing Party or to which the 12 (“Termination”). ATR Training Center reserves the right to
Party becomes insolvent or goes into liquidation or ceas-

7. GLOSSARY
receiving Party obtains access during its performance es paying its debts as they fall due or makes an assign- apply new, stricter terms and conditions to the Services and/
ment for the benefit of creditors or if such Party being a or part of Agreement that has not been suspended.
(collectively or individually referred to as the “Confidential
Information”), are confidential between the Parties. limited company passes a resolution for its winding up 12.3. Termination procedure:
or if a petition for its winding up is presented or it files for
11.2. The Confidential Information shall not be disclosed by protection from its creditors under any applicable Law 12.3.1. To the fullest extent permitted by applicable law

8. GENERAL TERMS
AND CONDITIONS
either Party, in whole or in part to any third party, without relating to bankruptcy or insolvency or any analogous and/or under this Agreement, the termination of all or part
prior written consent of the other Party, except: event in any jurisdiction shall take place. of this Agreement, for any reason whatsoever, shall become

69
 8. GENERAL TERMS AND CONDITIONS OF SALE FOR THE SUPPLY OF TRAINING & SERVICES

8. DRY & WET

TRAINING & SERVICES
1. OUR TRAINING
PHILOSOPHY

effective as from the receipt by the relevant Party of a Notice or labour troubles causing cessation of work, such event will 15. LIABILITY AND DISCLAIMER
of termination from the other Party (or any other period to be referred to as an “Excusable Delay”.
granted by the latter under the Notice of termination), with- 15.1. EXCEPT AS EXPRESSLY OTHERWISE STATED HEREIN,
13.2. The Affected Party will give Notice to the other Party THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF ATR
out it being necessary to take any further action or to seek
2. MAINTENANCE

RATING PART 147

COURSES TYPE

(the “Non-Affected Party”) of such Excusable Delay event Training Center, ITS AFFILIATES, THEIR OFFICERS, EMPLOY-
any consent from the relevant Party or any court having ju-
as soon as reasonably practicable after it becomes aware EES, AGENTS, SUBCONTRACTORS (INCLUDING TRAINING
risdiction.
thereof, and the Affected Party will use its reasonable en- CENTER) AND THEIR RESPECTIVE INSURERS, AND REME-
12.3.2. Any Order placed prior to any termination under this deavours to mitigate the effects of such Excusable Delay, DIES OF THE CUSTOMER SET FORTH IN THESE TERMS AND
Clause 12 shall remain valid, subject to any sum due by the without being obliged however to incur any unreasonable CONDITIONS ARE EXCLUSIVE AND IN SUBSTITUTION FOR,
COURSES NON-PART 147 RATING NON-PART 147

Customer to ATR Training Center under the Agreement and/ costs. AND THE CUSTOMER HEREBY WAIVES, RELEASES AND RE-
3. MAINTENANCE
COURSES TYPE

or any other agreement between the Parties, has been paid NOUNCES ALL OTHER WARRANTIES, OBLIGATIONS AND
in due time. 13.3. Neither Party shall be held liable, or deemed to be LIABILITIES OF ATR Training Center, ITS AFFILIATES, THEIR OF-
in default, if it fails to perform its obligations under this FICERS, EMPLOYEES, AGENTS, SUBCONTRACTORS (INCLUD-
12.3.3. The right to terminate in accordance with this Clause Agreement due to an Excusable Delay; without prejudice to ING TRAINING CENTER) AND THEIR RESPECTIVE INSURERS,
12 shall be without prejudice to any other rights and rem- Clause 13.5 hereinafter, the time fixed for the performance AND RIGHTS, CLAIMS AND REMEDIES OF THE CUSTOMER
edies available at applicable law and/or under this Agree- AGAINST ATR Training Center, ITS AFFILIATES THEIR OFFICERS,
by the Affected Party of its obligations affected by the Excus-
MAINTENANCE

ment to (i) enforce performance of this Agreement, (ii) to EMPLOYEES, AGENTS, SUBCONTRCATORS (INCLUDING
able Delay shall be extended for a period equal to the time
4. OTHER

recover damages and/or to seek termination of all or part of TRAINING CENTER) AND THEIR RESPECTIVE INSURERS, EX-
lost by reason of such Excusable Delay.
this Agreement before any court having jurisdiction as per PRESS OR IMPLIED HOWSOEVER, ARISING BY LAW OR OTH-
Clause 26 (“Law and Jurisdiction”), without incurring any li- 13.4. As soon as reasonably practicable after the end of the ERWISE, WITH RESPECT TO ANY SERVICES SUPPLIED UNDER
ability whatsoever. Excusable Delay, the Affected Party shall give Notice to the THE AGREEMENT INCLUDING BUT NOT LIMITED TO: (A) ANY
Non-Affected Party that the Excusable Delay has ended. WARRANTY AGAINST HIDDEN DEFECTS (“GARANTIE DES
5. ATR MODULAR
MAINTENANCE

12.4. Notwithstanding any provision in the General Terms

VICES CACHES”, AS RELEVANT; (B) ANY IMPLIED WARRANTY
TRAINING

and Conditions, the Customer shall not have the right to 13.5. If the Excusable Delay continues for more than ninety
OF MERCHANTABILITY OR FITNESS; (C) ANY IMPLIED WAR-
set off any claims it might have against ATR Training Center (90) Days as from the receipt by the Non-Affected Party of
RANTY ARISING FROM COURSE OF PERFORMANCE, COURSE
against sums otherwise due to ATR Training Center. the Notice as per Clause 13.2, each Party shall be entitled to OF DEALING OR USAGE OF TRADE; (D) ANY OBLIGATION,
terminate this Agreement according to the terms of Clause LIABILITY, RIGHT, CLAIM OR REMEDY, WHETHER CONTRAC-
12.5. Upon termination of the Agreement, ATR Training
Center shall be entitled to set off any claim it might have 12 (“Termination”) hereof. TUAL OR DELICTUAL AND WHETHER OR NOT ARISING FROM
EQUIPMENT
6. TRAINING

against any sums or otherwise due to the Customer THE ATR Training Center’S, ITS AFFILIATES’, THEIR OFFICERS’,
EMPLOYEES’, AGENTS’, SUBCONTRACTORS’ (INCLUDING
14. HARDSHIP TRAINING CENTER) AND THEIR RESPECTIVE INSURERS’ NEG-
13. EXCUSABLE DELAY In case of an unpredictable event that would deeply affect in
LIGENCE, ACTUAL OR IMPUTED; AND (E) ANY OBLIGATION,
LIABILITY, RIGHT, CLAIM OR REMEDY FOR LOSS OF DAMAGE
13.1. If either Party or any of its subcontractors (the “Af- any manner the condition of performance of the Agreement
TO ANY GODDS AND/OR SERVICES. ATR Training Center, ITS
7. GLOSSARY

fected Party”) is prevented, hindered or delayed from or (in whole or in part), ATR Training Center shall then inform AFFILIATES, THEIR OFFICERS, EMPLOYEES, AGENTS, SUB-
in performing any of its obligations under the Agreement the Customer of such. The Parties shall then meet to look for CONTRACTORS (INCLUDING TRAINING CENTER) AND THEIR
(other than a payment obligation) by an event which is out- a solution to compensate such effects. Should no agreement RESPECTIVE INSURERS SHALL HAVE NO OBLIGATION OR LI-
side of its control, including war or civil or foreign armed be reached within thirty (30) Days from said information of ABILITY, HOWSOEVER ARISING, FOR LOSS OF USE, REVENUE
aggression, riots, fires, floods, explosions, earthquakes or the Customer, ATR Training Center shall be entitled to ter- OR PROFIT OR FOR ANY OTHER DIRECT, INCIDENTAL, OR
8. GENERAL TERMS
AND CONDITIONS

accidents, epidemics or quarantine restrictions, any act of a minate the Agreement without incurring any liability in so CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY GOODS
Government Entity, embargoes, export prohibitions, strikes doing as per Clause 12 (“Termination”). AND/OR SERVICES DELIVERED UNDER THE AGREEMENT.

70
 1. OUR TRAINING
PHILOSOPHY
15.2. In addition to the foregoing, the Customer shall as- 16. INDEMNITY a) For the sake of clarity, with respect to the flight training
sume all risk and liability occasioned by failure of its Trainees performed on Customer’s aircraft, the Customer and its
and their group leader as per clause 3.6 to comply with ATR THE CUSTOMER AGREES UPON DEMAND TO INDEMNIFY insurers shall:
Training Center’s instructions and, save due to ATR Training AND HOLD HARMLESS ATR Training Center, ITS AFFILIATES, i. Indemnify and waive any rights of recourses and subroga-

2. MAINTENANCE

RATING PART 147

COURSES TYPE
Center’s wilful miscondut or gross negligence, ATR Training OFFICERS, EMPLOYEES, AGENTS AND/OR SUBCONTRAC- tion against ATR Training Center, its Affiliates, their employ-
Center shall have no liability in the event, for any reason TORS (INCLUDING TRAINING CENTER) IN FULL AGAINST ees, directors, officers, agents, Subcontractors (including
whatsoever, a Service on ground or in flight contemplated ALL LOSSES, LIABILITIES, ACTIONS, CLAIMS, PROCEEDINGS, TRAINING CENTER) and insurers in respect of an Aircraft
by this Agreement does not take place. JUDGEMENTS, DAMAGES, COMPENSATION, OBLIGATIONS, Hull and Spares All Risks Insurance policy (including, to the
INJURIES, COSTS AND EXPENSES (INCLUDING LEGAL COSTS extent usually available war and allied perils); and

COURSES NON-PART 147 RATING NON-PART 147

15.3. DISCLAIMER: NOTWITHSTANDING ANY OTHER AND EXPENSES) OF WHATEVER NATURE SUFFERED BY ANY

3. MAINTENANCE
ii. A Comprehensive General Third Party Legal Liability and

COURSES TYPE
TERMS STATED HERIEN, ANY DOCUMENT PREPARED BY
OF THEM TO THE EXTENT THAT THE SAME ARE CAUSED Aircraft Passengers and Third Party Legal Liability Insur-
ATR Training Center FURTHER TO THE REQUEST OF THE
BY OR RELATED TO ANY CLAIM FOR PERSONAL INJURY
CUSTOMER IS PROVIDED FOR INFORMATION AND INDIC- ance in respect of incidents involving Aircraft; and,
OR DEATH OR LOSS OR DAMAGE DIRECTLY OR INDIRECT-
ATIVE PURPOSE ONLY. IN PREPARING SUCH DOCUMENTS, iii. Name ATR Training Center, its Affiliates, their employ-
LY OCCASIONED BY CUSTOMER’S DEFAULT (INCLUDING
ATR Training Center HAS RELIED UPON INFORMATION PRO- ees, directors, officers, agents, Subcontractors (including
VIDED BY THE CUSTOMER AND THIRD PARTIES. NO UNDER- NON-COMPLIANCE WITH ANY STATUTORY OR OTHER OB-
TRAINING CENTER), as additional insured with severa-
LIGATION IN RELATION TO GOODS AND/OR SERVICES),

MAINTENANCE
TAKING, REPRESENTATION, WARRANTY OR OTHER ASSUR- bility of interest under the Customer’s Comprehensive

4. OTHER
ANCE, EXPRESS OR IMPLIED, IS OR WILL BE MADE AND NO FAILURE TO FOLLOW ATR Training Center’S INSTRUCTIONS
Aviation Legal Liability insurance policies, including War
LIABILITY IS OR WILL BE ACCEPTED BY ATR Training Center (WHETHER ORAL OR WRITTEN), OR MISUSE OR MAL-OPER-
risks and Allied perils (such insurance shall include the
OR ITS AFFILIATES, SHAREHOLDERS, EMPLOYEES, ADVIS- ATION OF GOODS (INCLUDING TRAINING EQUIPEMENTS)
AVN52E Extended Coverage Endorsement (aviation lia-
ERS, AGENTS, SUBCONTRCATORS (INCLUDING RTC) OR BY OR ON THE PART OF THE CUSTOMER OR ANY PERSON
bilities) or any further Endorsement replacing AVN52E as
BY ANY OTHER PERSON AS TO OR IN RELATION TO (I) THE OR PERSONS OTHER ATR Training Center THAN ATR Train-
may be available as well as coverage in respect of War

5. ATR MODULAR
MAINTENANCE
ACCURACY OR COMPLETENESS OF THE DOCUMENT AND ing Center, ITS AFFILIATES, OFFICERS, EMPLOYEES, AGENTS
and Allied Perils Third Parties Legal Liabilities insurance)

TRAINING
ANY MATERIALS IN CONNECTION THERETO OR (II) THE IN- AND/OR SUBCONTRACTORS (INCLUDING TRAINING
to the extent of the Customer’s undertaking hereunder.
FORMATION OR OPINIONS CONTAINED THEREIN OR SUP- CENTER).
Such policy to be primary and without right of contribu-
PLIED HEREWITH OR (III) THE FITNESS OF THE CONTENTS
OF THE DOCUMENT AND ANY MATERIAL IN CONNECTION THIS INDEMNITY CLAUSE SHALL REMAIN IN FORCE NOT- tion from any other policy held by ATR Training Center, its
THERETO FOR ANY PURPOSE (IV) ANY OTHER WRITTEN OR WITHSTANDING TERMINATION OR CANCELLATION FOR Affiliates, their employees, directors, officers, agents, Sub-
ORAL INFORMATION THAT HAVE BEEN OR MAY AT A FU- WHATEVER REASON OR EXPIRY OF THE AGREEMENT. contractors (including TRAINING CENTER); and,

EQUIPMENT
6. TRAINING
TURE DATE BE, MADE AVAILABLE BY ATR Training Center TO b) Any insurances policies to be subscribed by the Cus-
THE CUSTOMERR AND ITS ADVISERS. ACCORDINGLY, NEI- tomer in compliance with its undertakings under the
THER ATR Training Center NOR ANY OF ITS SHAREHOLD- 17. INSURANCE Agreement, shall also have been endorsed as follows:
ERS, DIRECTORS, EMPLOYEES, ADVISERS, AGENTS, SUB- i. Include breach of warranty in favour of the Supplier to the
17.1. The Customer shall maintain adequate insurance at its
CONTRACTORS (INCLUDING RTC) OR AFFILIATES SHALL BE extent usually available under such insurances;
LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL own costs and expenses and with insurers of internationally rec-
ii. All such insurance shall not become ineffective, can-

7. GLOSSARY
LOSS, COST, EXPENSE OR DAMAGE SUFFERED BY ANY PER- ognized reputation acceptable to the Supplier in accordance
celled, or coverage decreased or materially changed
SON IN CONNECTION WITH OR AS A RESULT OF RELYING with applicable legislation and industry standards, with respect
except on thirty (30) Days (seven (7) Days or such lesser
ON ANY STATEMENT, OR AS A RESULT OF ANY OMISSION to its undertakings under the Agreement including Clauses 15
period as is customary in respect of war and allied perils)
IN, OR SUPPLIED WITH ANY DOCUMENT AND ANY MATE- and 16 and shall provide prior to the performance of the Ser-
prior written Notice thereof to ATR Training Center.
RIAL IN CONNECTION THERETO. ANY DOCUMENT PRE- vices by ATR Training Center, a certificate of insurance, in a form

8. GENERAL TERMS
AND CONDITIONS
PARED BY ATR Training Center SHALL BE USED EXCLUSIVELY acceptable to ATR Training Center and in English, evidencing 17.2. Deductible: any applicable deductible shall be borne
FOR THE PURPOSE FOR WHICH IT IS SUPPLIED. such insurance coverage. by the Customer with respect to the above policies.

71
 8. GENERAL TERMS AND CONDITIONS OF SALE FOR THE SUPPLY OF TRAINING & SERVICES

8. DRY & WET

TRAINING & SERVICES
1. OUR TRAINING
PHILOSOPHY

17.3. The Customer will advise ATR Training Center imme- EXPORT LAWS. ANY TERMINATION UNDER THIS CLAUSE iv. In case of conflict between the English version of the Gen-
diately in the event of the occurrence of any event of loss or SHALL DISCHARGE ATR Training Center OF ALL OBLIGA- eral Terms and Conditions and any other version in another
damage during the term of this Agreement. TIONS AND LIABILITIES, AND NO DAMAGE OR COMPEN- language such as French, the English version shall prevail.
SATION WHATSOEVER CAN BE CLAIMED.
2. MAINTENANCE

RATING PART 147

18. EXPORT CONTROL

COURSES TYPE

v. Independent contractors: neither Party is the representative

19. SEVERABILITY or agent of the other Party for the purposes of this Agree-
THE CUSTOMER WARRANTS THAT THE MATERIALS, THE
ment and nothing herein shall be construed as authorizing
TRAINING EQUIPMENT AND THE SERVICES SHALL BE In the event of any clause or provision or part thereof of the
either Party to act as the other Party’s representative or agent.
USED FOR COMMERCIAL PURPOSES ONLY, AND SHALL Agreement being rendered or declared ineffective, unen-
Notwithstanding any other provisions of this Agreement,
BE USED AND/OR RE-EXPORTED (WHERE RELEVANT) IN forceable, illegal or invalid by any legislation or rule of law or
COURSES NON-PART 147 RATING NON-PART 147

this Agreement shall not be construed as a joint venture,

3. MAINTENANCE

COMPLIANCE WITH ALL APPLICABLE EXPORT CONTROL by any decision of any court of competent jurisdiction, the
COURSES TYPE

partnership, agency, incorporation or business association.

LAWS AND REGULATIONS (“EXPORT LAWS”), INCLUDING remainder of any affected clause or provision of the Agree-
Each Party hereto shall remain an independent contractor.
THOSE APPLICABLE TO INFORMATION AND DOCUMEN- ment shall remain in full force and effect and the Parties
TATION. THE CUSTOMER ACKNOWLEDGES THAT ATR hereto agree to substitute, as far as is practicable, a provision
Training Center’S OBLIGATIONS UNDER THE AGREEMENT having substantially the same effect in its legal and commer-
21. SURVIVAL
ARE SUBJECT TO ALL SUCH EXPORT LAWS, AND THAT cial content as the severed provision which re-institutes their
MAINTENANCE

ATR Training Center SHALL IN NO EVENT BE LIABLE IN THE original intent in a valid manner, but which is not prohibited, Notwithstanding the foregoing, any Clause which, by their
4. OTHER

EVENT THAT THE PERFORMANCE BY ATR Training Center unlawful or unenforceable. nature shall survive the expiry or termination or cancellation
OF ANY OF ITS OBLIGATIONS UNDER THE AGREEMENT of the Agreement, shall remain in full force after such expiry
IS AFFECTED OR IMPAIRED BY EXPORT LAWS. ATR Train- or termination or cancellation, including: Clause 10 “Intel-
ing Center SHALL NOT BE OBLIGATED TO APPLY FOR ANY 20. ENTIRE AGREEMENT lectual Property Rights”, Clause 11 “Confidentiality”, Clause
EXPORT LICENSE OR RETRANSFER AUTHORIZATION IN 12 “Termination”, Clause 16 “Indemnity”, Clause 18 “Export
5. ATR MODULAR
MAINTENANCE

i. Except as may otherwise be stipulated in writing, the Agree-

CONNECTION WITH THE AGREEMENT OR CUSTOMER’S Control” and , Clause 26 “Law and Jurisdiction”.
TRAINING

ment (including its amendment, novation, variation or sup-

ACTIVITIES.
plementation from time to time and any other agreement
NOTWITHSTANDING ANY PROVISION IN THE GENERAL or documents construed as a reference to the Agreement)
22. NOTICES
TERMS AND CONDITIONS, ATR Training Center HAS THE shall constitute the entire agreement between the Parties
RIGHT AT ITS OWN DISCRETION AND AT ANY TIME TO and shall supersede and exclude all prior representations, All notices and requests required or authorised hereof shall
TERMINATE PART OR ALL OF THIS AGREEMENT OR OF AN proposals or agreements whether oral or in writing. be given in writing delivered by hand or by courier service
EQUIPMENT
6. TRAINING

ORDER WITH IMMEDIATE EFFECT AND WITH NO LIABILITY with proof of delivery and/or by fax (“Notice”) and:
ii. The Customer acknowledges that, in entering into the Agree-
ON ATR Training Center’S PART OR COMPENSATION DUE, i. If delivered by hand, shall have been deemed received
ment, it does not do so on the basis of, and does not rely on, any
IF AT ANY TIME: (I) ITS COMPLIANCE WITH ANY OF THE when so delivered; or,
representation, warranty or other provision except as expressly
TERMS OF THIS AGREEMENT CONSTITUTES OR THREAT- ii. if delivered by registered mail, shall be deemed to have
provided herein and in the Agreement, and all conditions, war-
ENS TO CONSTITUTE AN INFRINGEMENT OF THE EXPORT been received by the addressee on the Day on which it
ranties or other terms implied by statute or applicable law are
7. GLOSSARY

LAWS; AND/OR (II) ANY OF ATR Training Center’S SUPPLI- shall have signed as received; or,
hereby excluded to the fullest extent permitted by law.
ERS AND/OR ANY GOVERNMENTAL AUTHORITY RAISE iii. if delivered by fax, shall be deemed to have been re-
CONCERNS REGARDING ANY OF THE TRANSACTIONS iii. The Agreement may not be amended, modified or com- ceived by the addressee on the next Business Day fol-
ENVISAGED IN THIS AGREEMENT; AND/OR (III) ATR Train- plemented at any time except by a written document lowing electronic acknowledgement;
ing Center HAS ANY DOUBT WHATSOEVER FOR ANY REA- signed by duly authorized representatives of both Parties In the event a Party chooses to give a Notice by several of
8. GENERAL TERMS
AND CONDITIONS

SON AS TO WHETHER DELIVERY OF ANY MATERIALS OR and subject to compensation for all costs ATR Training the aforesaid means, the earliest of the receipt dates will be
SERVICE UNDER THIS AGREEMENT WOULD CONTRAVENE Center may incur in connection with such change, if any. considered. In any case, any notice or communication shall

72
 1. OUR TRAINING
PHILOSOPHY
be also transmitted by an e-mail with attached copy of such other right or remedy hereunder, and shall be without prej- sary to request urgent injunctive relief or to enforce any
(in format PDF or similar support). Each Notice shall be ad- udice to its legal rights, and the obligations of the Customer court decision.
dressed to the Party at the address set forth by the Agreement shall continue in full force and effect.
or at such other address as a Party shall notify to the other Par-
27. IMMUNITY

2. MAINTENANCE

RATING PART 147

26. LAW / JURISDICTION

COURSES TYPE
ty, or in default thereof to their respective registered offices. To the extent that the Customer may in any jurisdiction in
i. The Agreement and any dispute arising in relation to it
which proceedings may at any time be instituted for the de-
23. ASSIGNMENT OF CONTRACT shall be governed by, interpreted and construed in ac-
cordance with the laws of France. termination of any question arising under or for the enforce-
ATR Training Center may assign the Agreement and the ment of the Agreement (including any interlocutory pro-
ii. The United Nations Convention on Contracts of April
rights and obligations thereunder in whole or in part without

COURSES NON-PART 147 RATING NON-PART 147

11th, 1980 for the International Sale of Goods shall be ceedings the execution of any judgement or award arising

3. MAINTENANCE
the consent of the Customer. The Agreement being personal

COURSES TYPE
excluded for the application of the Agreement. therefrom), be entitled to claim or otherwise be accorded for
to the Customer, the latter shall not without the prior written iii. In the event of a dispute arising out of, or in connection itself or its property assets or revenues immunity from suit
consent of ATR Training Center, assign, transfer, mortgage, with, including without limitation, the interpretation, exe- and attachment (whether in aid of execution before judge-
charge or dispose of any of its rights hereunder, or sub-con- cution or termination of the Agreement and unless other- ment or otherwise) or other legal process and to the extent
tract or otherwise delegate any of its obligations hereunder. wise provided by the Agreement, either Party may notify that in any such jurisdiction there may be attributed to the
such dispute to the other through service of a written no- Customer or its property assets or revenues such immunity

MAINTENANCE
tice (the “Notice of Dispute”). The Parties shall make their (whether or not claimed) the Customer hereby irrevocably

4. OTHER
24. SUB-CONTRACTING best endeavours to settle the dispute amicably within one agrees not to so claim and waives such immunity to the full-
ATR Training Center reserves the right to sub-contract any (1) month after receipt of the Notice of Dispute. est extent permitted by the law of such jurisdiction.
of its obligations under the Agreement or any part thereof. iv. If the Parties fail to settle conciliation and said dispute
within said one (1) month, the courts of Paris (France) shall
have exclusive jurisdiction to settle any dispute arising 28. COSTS AND EXPENSES

5. ATR MODULAR
MAINTENANCE
out of or in connection with the Agreement, saved as oth-

TRAINING
25. NO WAIVER Unless otherwise provided under this Agreement, each
erwise provided by the Agreement.
Any failure, delay or indulgence from ATR Training Center in v. The Parties hereto hereby agree that the procedures set Party shall pay its own costs relating to the negotiation, pre-
exercising any right conferred hereunder shall not operate forth in this Clause 26 shall be the exclusive dispute res- paration, execution and implementation of this Agreement
as a waiver of such right nor preclude the exercise of any olution procedures applicable, except as shall be neces- and of any document related hereto.

EQUIPMENT
6. TRAINING
7. GLOSSARY
8. GENERAL TERMS
ATR GIE established under the laws of France, identified under n° 323 932 236 (Toulouse Commercial Register), with its registered office located at 1, allée

AND CONDITIONS
Pierre Nadot, 31712 Blagnac Cedex, France.

73
 ATR
1, allée Pierre Nadot

T: +33 (0)5 62 21 62 21
F: +33 (0)5 62 21 68 00
31712 Blagnac cedex - France

© ATR. March 2018. All rights reserved. Proprietary document of ATR. This document shall not be reproduced or disclosed to a third party without the written consent of ATR.
This document and its content shall not be used for any purpose other than that for which it is supplied. ATR, its logo, the distinctive ATR aircraft profiles and patented
information relating to the ATR aircraft are the exclusive property of ATR and are subject to copyright. This document and all information contained herein are the sole
property of ATR. No intellectual property right is granted through, or induced by, the delivery of this document or the disclosure of its content. The statements made
herein do not constitute an offer or a representation. They are based on the mentioned assumptions and are expressed in good faith.