Preventive Care and Home

Remedies for Your Computer

The Healthy PC

McGraw-Hill Osborne
New York Chicago San Francisco Lisbon

Carey Holzman London Madrid Mexico City Milan New Delhi

San Juan Seoul Singapore Sydney Toronto
McGraw-Hill/Osborne
2100 Powell Street, 10th Floor
Emeryville, California 94608
U.S.A.
To arrange bulk purchase discounts for sales promotions, premiums, or fund-raisers, please
contact McGraw-Hill/Osborne at the above address. For information on translations or
book distributors outside the U.S.A., please see the International Contact Information page
immediately following the index of this book.

The Healthy PC: Preventive Care and Home Remedies for Your Computer

Copyright © 2003 by The McGraw-Hill Companies. All rights reserved. Printed in the
United States of America. Except as permitted under the Copyright Act of 1976, no part of
this publication may be reproduced or distributed in any form or by any means, or stored in
a database or retrieval system, without the prior written permission of publisher, with the
exception that the program listings may be entered, stored, and executed in a computer
system, but they may not be reproduced for publication.
1234567890 FGR FGR 019876543
ISBN 0-07-222923-3
Publisher Brandon A. Nordin
Vice President &
Associate Publisher Scott Rogers
Acquisitions Editor Margie McAneny
Project Editor Carolyn Welch
Acquisitions Coordinator Jessica Wilson
Technical Editor Rob Shimonski
Copy Editor Marilyn Smith
Proofreader Susie Elkind
Indexer Claire Splan
Composition Tara A. Davis, Carie Abrew
Illustrators Kathleen Fay Edwards, Melinda Moore Lytle, Michael Mueller
Cover Design Pattie Lee

This book was composed with Corel VENTURA™ Publisher.

Information has been obtained by McGraw-Hill/Osborne from sources believed to be reliable. However, because of the
possibility of human or mechanical error by our sources, McGraw-Hill/Osborne, or others, McGraw-Hill/Osborne does not
guarantee the accuracy, adequacy, or completeness of any information and is not responsible for any errors or omissions or the
results obtained from the use of such information.
 Dedication
This book is dedicated to my sister, Linda Rouse, who just
a few years ago knew nothing about computers and today can
fix most computer problems with her eyes closed. Her recent
accomplishments are a great inspiration to anyone intimidated
by computers. You can do it, too, and purchasing this book is
a great first step.
About the Author
Carey Holzman has over 13 years of professional PC repair experience and has
been working with computers as a hobby since the early 1980s. He hosts his own
weekly Internet-based radio talk show and frequently does PC-related presentations
for local PC user groups.
For over seven years, Carey has owned his own company, Discount Computer
Repair, in Glendale, Arizona, where he does computer repair, upgrades, and custom
computer designs. He also does network and telephone wiring. Carey has worked
at many major corporations including Intel, APS (Arizona’s largest power company),
SRP (Arizona’s second largest power company), and the Arizona Department of
Environmental Quality.
Carey was A+ certified in 1995 and has numerous other certifications from
other computer-related corporations such as Hewlett-Packard and IBM. Carey
has been featured in numerous computer and trade magazines across the world,
including the Toronto Star in Canada and Silicon Chip Magazine in Australia,
not to mention the Glendale Star, a local paper in Carey’s home town. Carey
also contributed to The Home Networking Survival Guide, a book by David
Strom (published by McGraw-Hill/Osborne).
Carey also offers free advice and support at http://www.webpronews.com/
careyholzman.html. And his web page with numerous PC tips and industry scandal
news can be found at www.careyholzman.com.

About the Technical Editor

Robert J. Shimonski holds over 30 technical certifications, including the CompTIA
A+ and HTI+. He is a Microsoft Certified Systems Engineer on multiple platforms,
including Windows NT and 2000, and is also a Lead Network Engineer for the
Danaher Corporation. Robert worked his way up through the ranks, starting as a
PC technician repairing and updating PCs. He has been building and maintaining PCs
and teaching A+ classes in the New York area for years and loves to tweak PCs
for maximum performance and security. Robert has worked on and published
over 25 books and is the sole author of Windows 2000 and Windows Server 2003:
Clustering and Load Balancing, published by McGraw-Hill/Osborne. You can
contact Robert anytime at www.rsnetworks.net.
 Contents
Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii

PART I Basic Maintenance

CHAPTER 1 Temporary Files, Internet Cache, Scandisk . . . . . . . . . . . . . . 3
Deleting the Temp Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Enabling Automatic Cleanup in Windows XP . . . . . . . . . . 6
Checking Your Disk with Scandisk . . . . . . . . . . . . . . . . . . . . . . . . 7
Running Scandisk with Windows 98/ME . . . . . . . . . . . . . . 7
Running Scandisk with Windows XP . . . . . . . . . . . . . . . . . 8
Reading the Scandisk Report . . . . . . . . . . . . . . . . . . . . . . . 9
Defragmenting Your Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

CHAPTER 2 Improving PC Performance and Reliability . . . . . . . . . . . . . . 15

Locating and Eliminating Software Spies . . . . . . . . . . . . . . . . . . . 16
What Is Spyware? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
What’s the Problem with a Little Advertising? . . . . . . . . . . 17
How Can You Locate and Remove Spyware? . . . . . . . . . . 19
Antivirus: Does This Look Infected to You? . . . . . . . . . . . . . . . . . 24
What Can a Virus Do? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
How Does Antivirus Software Work? . . . . . . . . . . . . . . . . . 25
What Kinds of Viruses Are There? . . . . . . . . . . . . . . . . . . . 26
Darwinism: Why Do Viruses Exist and Who
Creates Them? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Self-Defense: How Can I Protect Myself? . . . . . . . . . . . . . 27
This Old Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
What Kinds of Updates Are There? . . . . . . . . . . . . . . . . . . 30
How Do I Stay Current? . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
How Can I Find Out about New Critical Updates? . . . . . . 33
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

v
vi The Healthy PC

CHAPTER 3 Optimizing Your Internet Connection . . . . . . . . . . . . . . . . . . 37

For Dial-Up Modem Users Only . . . . . . . . . . . . . . . . . . . . . . . . . . 38
What Does 56k Actually Mean? . . . . . . . . . . . . . . . . . . . . . 38
How Can I Determine Which Modem I Have? . . . . . . . . . . 40
How Can I Get a Faster Connection? . . . . . . . . . . . . . . . . . 44
How Fast Is My Modem Connecting? . . . . . . . . . . . . . . . . 47
For Broadband Cable Modem, DSL Modem, and
Satellite Users Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
How Can I Check My Internet Connection Configuration? 49
How Can I Determine My Internet Speed? . . . . . . . . . . . . . 51
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

PART II Internet 101

CHAPTER 4 Internet Cookies, Temporary Internet Files, and Pop-ups . . . 55
Internet Cookies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
How Do Internet Cookies Work? . . . . . . . . . . . . . . . . . . . . 56
So What’s All the Fuss About? . . . . . . . . . . . . . . . . . . . . . . 57
Taming the Cookie Monster . . . . . . . . . . . . . . . . . . . . . . . . 57
Temporary Internet Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Are Temporary Internet Files Good or Bad? . . . . . . . . . . . 61
Taking Control of Your Temporary Internet Files . . . . . . . 63
Internet Pop-ups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Popping the Pop-ups! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
For Windows XP Users: Getting Rid of Messenger
Pop-Ups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

CHAPTER 5 All About Email: Spam and Hoaxes . . . . . . . . . . . . . . . . . . . . 73

Email Hoaxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
How Can I Tell a Hoax from a Legitimate Message? . . . . . 75
What Else Should I Know About Email Hoaxes? . . . . . . . 77
Spam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Why Do I Receive So Many Spam Messages? . . . . . . . . . . 77
Why Is It Called Spam? . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Is There Anything I Can Do About Spam? . . . . . . . . . . . . . 79
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

CHAPTER 6 Firewalls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
What Is a Firewall? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Aren’t Firewalls Complicated and Expensive? . . . . . . . . . . 89
What About Hardware Firewalls? . . . . . . . . . . . . . . . . . . . . 90
I Was Told Windows XP Includes a Firewall! . . . . . . . . . . 92
How Can I Tell If My Computer Is Vulnerable? . . . . . . . . . 94
 Contents vii

Universal Plug and Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Disabling UPnP in Windows Me . . . . . . . . . . . . . . . . . . . . 96
Disabling UPnP in Windows XP . . . . . . . . . . . . . . . . . . . . 98
More on File and Printer Sharing . . . . . . . . . . . . . . . . . . . . . . . . . 100
Removing File and Printer Sharing from Windows 98/Me 100
Removing Unnecessary Basic Services from Windows XP 100
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

CHAPTER 7 Basic Windows Performance Tips . . . . . . . . . . . . . . . . . . . . . 103

DMA Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Enabling DMA Mode in Windows 98/Me . . . . . . . . . . . . . 105
Enabling DMA Mode in Windows XP . . . . . . . . . . . . . . . . 108
Active Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Disabling Active Desktop in Windows 98/Me . . . . . . . . . . 110
Disabling Active Desktop in Windows XP . . . . . . . . . . . . . 111
Unnecessary Animations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Disabling Unnecessary Animations in Windows 98/Me . . 113
Using Tweak UI with Windows 98/Me . . . . . . . . . . . . . . . . 114
Disabling Unnecessary Animations in Windows XP . . . . . 116
Fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
How Many Fonts Are Too Many? . . . . . . . . . . . . . . . . . . . . 117
Taking Control of Your Fonts . . . . . . . . . . . . . . . . . . . . . . . 118
Windows Swap File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
How Does Swapping Work? . . . . . . . . . . . . . . . . . . . . . . . . 118
Configuring Your Windows Swap File in Windows 98/Me 120
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

PART III Optimize Windows Performance

CHAPTER 8 More Windows Performance Tips . . . . . . . . . . . . . . . . . . . . . 127
Unnecessary Software and System Resources . . . . . . . . . . . . . . . 128
Removing Unnecessary Software . . . . . . . . . . . . . . . . . . . . 128
Checking System Resources (for Windows 98/Me Users) . . 129
Disabling Unnecessary Programs from Startup . . . . . . . . . 131
Windows XP Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Disabling Unnecessary Services from Windows XP . . . . . 134
Turning Off Error Reporting and Automatic Restart in Windows
XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Using NTFS in Windows XP . . . . . . . . . . . . . . . . . . . . . . . 139
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

CHAPTER 9 Safe Computing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Leave the PC On or Turn It Off? . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Using Windows Power Settings for Desktop Computers . . 145
Using Windows Power Settings for Laptop Computers . . . 147
viii The Healthy PC

Do I Need a Screensaver? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

What’s a UPS? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Back Up Your Important Data! . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Using a USB Thumb Drive . . . . . . . . . . . . . . . . . . . . . . . . . 154
Backing Up Your Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

CHAPTER 10 Computer Upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Upgrading Your Operating System . . . . . . . . . . . . . . . . . . . . . . . . 158
Adding Memory (RAM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Do I Need More RAM? . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
What Kind of RAM Is Compatible with My System? . . . . 161
Plugging in RAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Upgrading Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
What’s the Viewable Area? . . . . . . . . . . . . . . . . . . . . . . . . . 162
LCD or Glass? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Upgrading Your CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Upgrading Your Hard Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Upgrade Your Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . 165
Replacing Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Limitations of Proprietary Computers . . . . . . . . . . . . . . . . 166
Which Computer Should I Get? . . . . . . . . . . . . . . . . . . . . . 166
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167

PART IV Advanced Topics

CHAPTER 11 Preventive Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Maintain Computer Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Blow Out Dust and Debris . . . . . . . . . . . . . . . . . . . . . . . . . 172
Ensure All Fans Are Operating Properly . . . . . . . . . . . . . . 173
Verify That the Capacitors on the Motherboard Are
Not Leaking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Download the Latest Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Checking Your Current Drivers . . . . . . . . . . . . . . . . . . . . . 176
Checking for New Drivers . . . . . . . . . . . . . . . . . . . . . . . . . 177
Removing Temp Files Manually . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Deleting Temp Files in Windows XP Systems . . . . . . . . . . 179
Deleting Temp Files in Windows Me Systems . . . . . . . . . . 182
Deleting Temp Files in Windows 98 Systems . . . . . . . . . . 183
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

CHAPTER 12 What to Do When Things Go Wrong . . . . . . . . . . . . . . . . . . . . 187

System Restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
What Does System Restore Do? . . . . . . . . . . . . . . . . . . . . . 188
Using System Restore (for Windows Me/XP Users) . . . . . 189
 Contents ix

Safe Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

Starting Windows 98/Me Systems in Safe Mode . . . . . . . . 191
Starting Windows XP Systems in Safe Mode . . . . . . . . . . . 193
Software to Avoid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196

PART V Appendixes
APPENDIX A Free Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Technical Support Web Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
PC User Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Newsgroups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

APPENDIX B Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

APPENDIX C System Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
APPENDIX D Windows 98/Me Help! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
APPENDIX E Windows XP Help! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
APPENDIX F Useful and Safe Freeware . . . . . . . . . . . . . . . . . . . . . . . . . . . 221

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
This page intentionally left blank
 Acknowledgments
This project started in February of 2003 and was in the works until October, 2003.
During this time, I was graced to have such a talented crew from McGraw-Hill/
Osborne to direct me and help keep everything on track. I have to give extra special
thanks to Francis “Franny” Kelly of McGraw-Hill/Osborne, and to Robert J.
Shimonski, the book’s technical reviewer. Without these fantastic people, this
opportunity would never have existed.
I also want to thank the entire McGraw-Hill/Osborne crew: Tana Allen,
Bettina Faltermeier, Margie McAneny, Marilyn Smith, Laura Stone, Carolyn
Welch, Lyssa Wald, Lisa Wolters-Broder, and Jessica Wilson for all of the time
and effort they invested into this project. Thanks also go to Nick Goetz for his
work as developmental editor.
I mustn’t forget to say thank you to my friends who helped me conquer some
of the obstacles during the writing process—Michelle DePorter, Maralina Dvorak,
Kyla Kahn, Ron Hillier, Steve Froehlich, Marc Abramowitz, Gerald Rosenbluth,
Dana Pretzer, and Robert Beaubien. Thanks also go to my wonderful “guinea pig”
test readers Stanley Skirvin and Ben Swank.
Of course, I have to give very special thanks and appreciation to my entire
family for their continued support and encouragement during this project. This
includes my dog Jake, who never left my side and never let me forget to take
a break and go outside once in a while.
Finally, a huge thanks goes to my fiancé, Michelle Roiland, for her patience,
understanding, support, and unconditional love. I love you, Michelle.

xi
This page intentionally left blank
 Introduction
If you’re like most people, you own a computer. And if you’re like most people,
you use it daily for work, play, and/or communication. But, like most people, when
the computer crashes, (and it will crash at the moment you need it most), you have
no idea what to do. Perhaps you read a book or two about computers supposedly
designed for “dummies” or “idiots,” only to discover that the topics and explanations
were still very difficult to grasp. Perhaps someone in the family is a self-proclaimed
“guru,” or a colleague at work volunteered to help, and now the situation is even
worse. Perhaps when you asked two different people for help, you got two different
answers, and you don’t know who to believe. So, you end up paying for a repair,
knowing it had to be something simple that you could have fixed yourself, if only
you knew a little bit more about computers.
If this sounds familiar, you’ve picked up the right book. Throughout the
chapters in this book, I intend to show you how to:

■ Perform preventive maintenance on your PC, along with virus removal

■ Prevent spam (unsolicited junk email)
■ Prevent Internet pop-ups
■ Locate and remove all of the spyware (hidden programs that monitor your
Internet activity) on your computer that you never knew were there
■ Optimize your computer performance and your Internet connection speed
■ Protect yourself against hackers
■ Make a backup copy of your important files
■ Upgrade your computer
■ Maintain your computer hardware
■ Solve common Windows problems

xiii
xiv The Healthy PC

Notice that I said I am going to show you. I believe people learn better by doing,
rather than by reading about doing. So, for each topic, you’ll find simple instructions
to follow each step of the way. Rather than talk all about how things work, I’ll show
you. That way, you’ll get a better understanding of how things work—without the
long, boring explanations. Treat this book as you would a cookbook. Each chapter
contains simple and easy-to-follow step-by-step instructions presented just like
a recipe.
Since most home computers are running a consumer version of Microsoft
Windows, and since this book is aimed at the average home user, it will focus
on Windows 98 (including Windows 98 Second Edition), Windows Millennium
Edition (Me), and Windows XP Home and Professional. If you have Windows 95
or 2000, don’t feel left out, because most of the information here still applies to
your computer, although the steps offered won’t match completely.

Navigational Instructions
To follow the steps for keeping your PC healthy, you’ll need to know how to
interpret the instructions of this book.

Using the Mouse

Throughout this book, there are numerous references to clicking, double-clicking,
and right-clicking the mouse. All mice sold with or for Windows-compatible PCs
have at least two buttons, and you use them as follows:

■ Click means to press and release, one time, the leftmost mouse button.
■ Double-click means to press and release twice, in quick succession, the
leftmost mouse button.
■ Right-click means to press and release, one time, the rightmost mouse button.

Throughout this book, you will be instructed to close windows when we

are finished working in them. One easy way to close any window is to click
the X in the top-right corner of the window.

Items listed in bold throughout this book represent the exact wording and
punctuation of what you should be looking for on your screen. It differentiates
the Windows components you’ll be instructed to use from the text of the book.
 Introduction xv

Working on the Desktop

The desktop is the entire screen area that contains your wallpaper and icons, as
shown in Figure 1. When you start a program, like Microsoft Word, it runs on top
of your desktop, in many cases hiding your wallpaper and icons.
As you follow the instructions throughout this book, no programs should be
running except for the ones you are instructed to run. Please close any running
programs before starting any of the examples in this book.
Some people are uncertain if they’ve shut down all the running programs. For
example, we’re not concerned about antivirus software, which should never be
turned off. We’re concerned only with programs that have a button on the Taskbar.
The Taskbar is typically at the bottom of your desktop and is usually gray or green
in color. The Taskbar contains the famous Start button on its left side and has a clock

Start button Quick Launch toolbar Taskbar Wallpaper Desktop System tray
FIGURE 1 Windows 98 desktop and Taskbar
xvi The Healthy PC

on the right side. In between, little buttons appear for every program you run, as in
this example:

You want to make sure that the Taskbar does not contain any of these program
buttons. No buttons means no running programs, and that’s what you want before
following the instructions in this book.

Your Windows Version

This book covers the four current consumer-based Windows operating systems:
Windows 98, Windows 98 Second Edition (SE), Windows Millennium (Me),
and Windows XP (Home and Professional versions). You will find specific
instructions to follow depending on which operating system you are running.
If you do not know which version of Windows you are using, simply right-click
the Start button, click Explore, click Help, and then click About Windows. The
window that opens will tell you all about your copy of Windows. Once you’ve
 Introduction xvii

determined which version of Windows you have, you can click OK, and then close
the remaining window.

All About Image

You might want to take this opportunity to configure your computer so that you’ll
be seeing everything exactly as demonstrated in the examples throughout this book.
This setup is optional and affects only how things look on your computer monitor.
It’s up to you to decide if you wish to implement any or all of these suggestions.
If you do follow the instructions here, the examples in this book will match what
you see on your screen (regardless of which operating system you are running),
and you shouldn’t have any trouble finding icons or menu items that are referred
to in this book. If you are a computer novice, then these steps are highly recommended.

Putting My Computer on the Desktop

There will be references to the My Computer icon quite often in this book. If you
are running Windows XP and do not have the My Computer icon located on your
desktop, you can usually find it by clicking the Start button (unless your Start menu
has been modified). If you would like to place the My Computer icon on your
desktop for easier access (highly recommended), follow these easy steps:

1. Right-click any empty part of your desktop (not on an icon or in a window).

2. Click the Properties option.

3. Click the tab labeled Desktop.

4. Click the button labeled Customize Desktop.…

5. Place a check in the box next to My Computer.

6. Click OK.

7. Click OK once more.

Adjusting the Control Panel

Along with My Computer, you’ll also be accessing the Control Panel quite
frequently. You may find that your Control Panel does not look exactly like the
examples in this book, particularly if you use Windows XP or Windows Me.
xviii The Healthy PC

Windows 98 and 98 SE users can follow the directions offered

for Windows 98. Windows XP Home Edition and Windows XP
Professional Edition users should follow the directions offered
for Windows XP.

Windows XP
To set up the Control Panel in Windows XP to look like Figure 2, follow these steps:

1. Click Start, and then click Control Panel.

2. If the top of your Control Panel says Pick a category, click

Switch to Classic View (located on the left side of the window).
3. Click View, and then click Icons.

4. Click View again.

5. Click Arrange Icons by, and then click Name.

FIGURE 2 Windows XP Control Panel

 Introduction xix

Additionally, some Windows XP users may access their Control Panel by first
clicking Start, and then clicking Settings. You can place the Control Panel directly
on the Start menu for faster and easier access, by following these steps.

1. Click Start, click Settings, and then click Control Panel.

2. Double-click the Taskbar and Start Menu icon.

3. Click the Start Menu tab.

4. Ensure that the Start menu (not Classic Start menu) option is selected as
shown in Figure 3, and click the Customize button.
5. Click the Advanced tab.

6. In the Control Panel options section, select Display as link, as shown in

Figure 4, and then click OK.
7. Click OK, and then close the Control Panel.

FIGURE 3 Windows XP Start menu options

xx The Healthy PC

FIGURE 4 Windows XP Advanced Start menu options

Windows Me
To set up the Control Panel in Windows Me, follow these steps:

1. Click Start, click Settings, and then click Control Panel.

2. On the left side of the Control Panel window, if you see View all Control
Panel options, click it. The left side of the window should now offer to
Display only commonly used Control Panel options.
3. Click View, and then click Large Icons.

4. Click View again.

5. Click Arrange Icons, and then click by Name.

Windows 98
To set up the Control Panel in Windows 98, follow these steps:

1. Click Start, click Settings, and then click Control Panel.

 Introduction xxi

2. Click View, and then click Large Icons.

3. Click View again.

4. Click Arrange Icons, and then click by Name.

Adjusting the Display of Files and Folders

You can also adjust how Windows displays files and folders. Choosing a layout
that is alphabetized and easy to read will help you to navigate and locate files,
folders, and icons. Also, it’s possible that double-clicking is disabled on your
computer. Since many of the instructions in this book call for double-clicking,
you should make sure that it’s enabled.

Windows XP
To set up your folder display and enable double-clicking in Windows XP, follow
these steps:

1. Double-click My Computer.

2. Click Tools (in the menu bar across the top of the window).

3. Click Folder Options….

4. Ensure Show common tasks in folders is selected.

5. Ensure Open each folder in the same window is selected.

6. Make sure the last option, Double-click to open an item (single-click

to select), is selected. You should have the three options shown in
Figure 5 selected.
7. Click OK, and then close the window.

Windows Me
To set up your folder display and enable double-clicking in Windows Me, follow
these steps:

1. Double-click My Computer.

2. Click Tools (in the menu bar across the top of the window).

3. Click Folder Options….

xxii The Healthy PC

FIGURE 5 If you are running Windows XP, make sure your screen matches
this picture.

4. Ensure Use Windows classic desktop is selected.

5. Ensure Enable Web content in folders is selected.

6. Ensure Open each folder in the same window is selected.

7. Make sure the last option, Double-click to open an item (single-click

to select), is selected. You should have the four options shown in
Figure 6 selected.
8. Click OK, and then close the window.

Windows 98
To set up your folder display and enable double-clicking in Windows 98, follow
these steps:

1. Double-click My Computer.
 Introduction xxiii

FIGURE 6 If you are running Windows Me, make sure your screen matches
this picture.

2. Click View (in the menu bar across the top of the window).

3. Click Folder Options….

4. Click the Settings… button (in the lower-right corner).

5. Ensure Use Windows classic desktop is selected.

6. Ensure Open each folder in the same window is selected.

7. Ensure For all folders with HTML content is selected.

8. Make sure that the last option, Double-click to open an item (single-click
to select), is selected. You should have the four options shown in Figure 7
selected.
9. Click OK.

10. Click Close, and then close the window.

xxiv The Healthy PC

FIGURE 7 If you are running Windows 98, make sure your screen matches
this picture.

Let’s Get Started

One of the most frustrating aspects of being a computer technician is listening
to all of the false information that is spread from person to person. Don’t get me
wrong—these people have the right intentions, but ultimately they are not helping
anyone. Then, when customers ask me if what they have been told is true and I tell
them no, they don’t know who to believe. What you hold in your hands is a book
that will teach you the right things, dispel the myths and hoaxes, and hopefully be
entertaining along the way.
So, turn the page and get started turning your PC into a lean, mean, clean,
efficient, and reliable machine! I promise, you can do it! When you’re finished
with this book, you’re going to be the local guru.
 Part I
Basic Maintenance
This page intentionally left blank
 Chapter 1
Temporary Files, Internet Cache,
Scandisk
4 The Healthy PC

T hink of this book as you would a cookbook. Do not skip sections or pages and
follow each step of the instructions offered. Explanations to terminology are
offered just once as they are first introduced to you throughout this book. Also,
certain tasks must be completed before starting subsequent tasks. If you haven’t
yet read the introduction to this book, I strongly recommend that you do so before
going any further. There are optional instructions offered in the introduction for
setting up your computer so that your screen will match the examples shown in
this book (which may be helpful for following along). Much like a recipe, when
you have completed the required steps, you will reap the rewards of your efforts,
while learning at the same time.

This chapter will introduce you to “temp” files, as well as general hard disk
check-up, cleanup and maintenance. If these words are foreign to you, don’t worry.
It will all be explained in great detail and useful analogies throughout each topic.

Deleting the Temp Files

As you use your computer, files are moved, created, and deleted. They also shrink
and grow in size. This includes files that Windows creates in order to operate
properly. Some of these files fall under the category of Windows temp files (temp
is short for temporary).
The problem with Windows temp files is that Windows quite often forgets
about them. Windows is supposed to automatically remove the Windows temp files
it creates, but in many cases, it does not. Over time, these files can take up quite a
bit of hard disk space, not to mention adding unnecessary clutter. As a result, you
may notice your computer performance will start to diminish as more and more
hard disk space is needlessly consumed.
So, the first thing we are going to do is erase those Windows temp files and
free that precious hard disk space. Have no fear, the Windows temp files contain
nothing you need or will miss, so feel free to wipe them out them with impunity.

The part of your computer where all of your programs and data are stored
is called your hard disk drive (HDD or hard disk for short). Most people
have just one, and you may know it better as your C: drive.

We are also going to use this opportunity to empty the Recycle Bin. As you
delete files, they go into the Recycle Bin. Depending on the size of your hard disk,
your Recycle Bin can potentially hold quite a bit of unneeded data. Just like a garbage
can, it needs to be emptied from time to time.
 CHAPTER 1: Temporary Files, Internet Cache, Scandisk 5

Another part of this cleanup will be to delete all of the temporary Internet files.
Temporary Internet files accumulate as you use the Internet (you’ll learn more about
this in Part II of this book).
The good news is Windows has a built-in, automated process to help you complete
these tasks. The bad news is that Windows still tends to forget to remove many of
the files. To keep things simple for now, we’re going to start with this automated
process and later, in Chapter 11, you’ll learn how to do a much more thorough
removal of all Windows temp files manually.

For All Versions of Windows

1. Double-click My Computer.

2. Right-click on your C: drive. The menu that appears is called a shortcut menu.

3. Click Properties to open the Properties dialog box.

4. In the Properties dialog box, click the button labeled Disk Cleanup.

5. Place checks in each box to remove the following (not all of the items on
this list may appear, depending upon which version of Windows you are
using). Other options that may appear on your screen, but are not mentioned
here (such as Downloaded Program Files shown in Figure 1-1), should
remain unchecked or use your own discretion. If in doubt, leave it unchecked.
■ Temporary Internet Files
■ Recycle Bin
■ Temporary Files
■ Temporary PC Health Files
■ Offline Web Pages
■ Application debugging information
■ Debug Dump Files
■ Old Chkdsk Files
■ Setup Log Files
■ WebClient/Publisher Temporary Files
6. Click OK to execute the clean up.
6 The Healthy PC

FIGURE 1-1 Windows ME Disk Cleanup dialog

7. Click Yes when asked if you are sure.

8. When the task is finished, click OK to close the window, and then close the
My Computer window.

Enabling Automatic Cleanup in Windows XP

Windows XP has a built-in feature that can perform the disk cleanup operation for
you at automated intervals, so you don’t need to do it manually. If you would like
to activate this feature, follow these steps:

1. Click Start, and then Control Panel.

2. Double-click Scheduled Tasks.

3. Double-click Add Scheduled Task.

4. Click Next.
 CHAPTER 1: Temporary Files, Internet Cache, Scandisk 7

5. In the alphabetized list that appears, click Disk Cleanup, and then click Next.

6. Choose how often you would like this task to run, and then click Next.

7. Select the time and day you would like this cleanup task to start, and then
click Next.
8. If your computer is configured to ask for a password before allowing
access to Windows, enter it here, and then click Next.
9. The applet, also called a Wizard, will inform you that your setup of this
task was successful, and will show the name of the task and verify when it
is scheduled to run. Click Finish and close the Scheduled Tasks window.

Checking Your Disk with Scandisk

Scandisk has been included with every version of Windows since Windows 95. When
you lose power or reset your computer improperly, you might recognize Scandisk
as the application that runs after Windows scolds you that it has not been shut
down correctly.
The purpose of the Scandisk utility is, literally, to scan your disk for logical and
physical errors. A logical error is one where data is misplaced or corrupted. A physical
error is one where the hard disk itself is damaged to some degree. Scandisk will
scan floppy disks, Zip disks and, of course, hard disks. The larger your disks, the
greater the opportunity for logical errors to occur within it.
For now, we’ll select to do a quick, logical check with Scandisk. If you want to
check your disk for physical errors at some point in the future, you can repeat the
steps here and select the Thorough option under Windows 98/ME or its Windows
XP equivalent, called Scan for and attempt recovery of bad sectors. This option
can take a long time to complete. It is highly recommended that you run a Thorough
test at least once; then you need to run it again only if you are experiencing problems
with your PC.

Running Scandisk with Windows 98/ME

Follow these steps to run Scandisk with either Windows 98 or Windows ME:

1. Double-click My Computer.

2. Right-click your C: drive and click Properties.

3. Click the tab labeled Tools.

8 The Healthy PC

4. Click the button labeled Check Now.

5. Select Standard as the type of test.

6. Place a check in the box next to Automatically fix errors.

7. Click Start.

Windows 98/Me users may experience the Scandisk utility starting over and
never completing. If Scandisk has not completed within 10 minutes or you receive
a message stating Scandisk has restarted ten times, asking if you want to continue,
select Cancel.
This happens because another program (or programs) is running in the background
and writing to the hard disk. This changes the contents of the disk, albeit slightly,
but that’s enough to make Scandisk need to restart. Think of it like this: Scandisk
is counting continuously,1, 2, 3, 4…, and some other program is shouting, “17!,
66!, 22!, 7!” Poor Scandisk must start all over.
It’s important that nothing else is running on the computer when Scandisk is
running. If a screensaver comes on, or if you start clicking icons or using programs,
Scandisk may never be able to complete its check of the hard disk. See Chapter 9
for details on customizing your screensaver settings. (Windows XP users don’t
need to worry about this, because the XP version of Scandisk does not run within
Windows.)
Some Windows 98/Me users may find that they need to boot into Safe Mode in
order to get Scandisk to run properly. Safe Mode starts Windows in its most basic
mode and is typically used when diagnosing a computer problem. Only the critical
components necessary for Windows to function are loaded. For more information
on Safe Mode, see Chapter 12.
As an alternative, there is a great free program you can download from the
Internet called EndItAll, which should allow you to run Scandisk without the
necessity of restarting the computer in Safe Mode. See Appendix F of this book
for more information about obtaining this program, as well as other free software.

Running Scandisk with Windows XP

Follow these steps to run Scandisk with Windows XP.

1. Double-click My Computer.

2. Right-click your C: drive and click Properties.

3. Click the tab labeled Tools.

 CHAPTER 1: Temporary Files, Internet Cache, Scandisk 9

4. Click the button labeled Check Now.

5. Select Automatically fix file system errors.

6. Click Start.

7. You must restart the computer for Scandisk to check the hard disk. Click
Yes, and then click OK to close the Local Disk (C:) Properties dialog box.
8. Close the My Computer window.

9. Restart your computer by clicking on the Start button, clicking Turn Off
Computer, and clicking Restart.

Reading the Scandisk Report

Windows 98/ME users will be greeted with an informative report containing the
results of Scandisk. Figure 1-2 shows an example of the Scandisk results.
Windows XP users will need to pull this information up manually, as follows:

1. Click Start, and then click Control Panel.

2. Click Administrative Tools.

3. Double-click Event Viewer, and then double-click Application.

4. Under the heading Source, double-click Winlogon, as seen in Figure 1-3.

If you see more than one instance of ‘Winlogon’ listed, determine which is

FIGURE 1-2 Windows 98/Me Scandisk results.

10 The Healthy PC

FIGURE 1-3 Event Viewer window in Windows XP

the most recent by looking at the date and time the report was created
and select it. Figure 1-4 shows an example of the Scandisk results in
Windows XP.

The only items we’re interested in here are the total disk space, the space available,
and whether or not there are any bad sectors. Windows assumes there are no bad
sectors, unless it is specifically told to look for them (using the Thorough option
described above). If bad sectors have been found in the past, it will remember
and report them whenever Scandisk runs in the future. Typically, bad sectors are
permanent and cannot be repaired. Windows XP Scandisk results may not make
any mention of bad sectors if none exist.
If Scandisk finds bad sectors, that’s an early indication of a failing hard disk.
Although there is no certainty your hard disk will fail any time soon, bad sectors
represent physical errors on the disk, and they will undoubtedly get worse as time
goes by. Any data that happens to reside on a bad sector will be lost. Making a
backup copy of your important data is highly recommended! Don’t worry; we’ll
explain how to do that in Chapter 9.
 CHAPTER 1: Temporary Files, Internet Cache, Scandisk 11

FIGURE 1-4 Windows XP Scandisk results

If the amount of available space is less than 10 percent of your total disk space,
you should uninstall any unused software, as discussed in Chapter 8 of this book.
If that doesn’t free enough space, then it looks like you’re in the market for a new
hard disk, which we’ll help you with in Chapter 10.

To help you determine what 10 percent of your disk space amounts to, you
can use the calculator that's included with Windows. Simply click Start,
then Programs, then Accessories, and then Calculator. Type in the large
number that is reported as your “total disk space,” then click the multiply
button, type in the number 10, and click the percentage button.

If there are any open windows on your desktop, now is a good time to close all
of them.

Defragmenting Your Disk

Defragmenting your hard disk is a free and painless way of increasing your data
integrity and it may even help your computer run faster.
12 The Healthy PC

As data is erased or altered, or programs are removed, what remains are empty
spaces throughout the hard disk where the data and/or programs used to reside. The
next time data is saved or a program is added to the hard disk, it’s placed in the first
available space. If that space is not large enough to hold all of the data, it moves to
the next available space, and so on, until all of the data is completely saved. This
data is then considered to be fragmented, because it is no longer in one uninterrupted,
or contiguous, piece. Imagine if this book were written that way. If the sentences
were fragmented throughout the book, you would need a map to instruct you to go
to a certain page, count down four sentences, read the third word from the left, then
go to another page, count down seven sentences from the top, read the first word,
and so on—until the entire sentence was reassembled. That’s a lot of work and
a lot of time.
By defragmenting the hard disk, you are reassembling all of the data back into
contiguous pieces and, as a result, this leaves all of the remaining free space contiguous
as well. This means less wear and tear on the hard disk, faster access to data, and
less of a chance for a piece of data to get lost, since it’s no longer scattered about.
To start the disk defragmenter:

1. Double-click My Computer.

2. Right-click on your C: drive and click on Properties.

3. Click the tab labeled Tools.

For Windows 98/ME:

4. For Windows 98/ME, click the button labeled Defragment Now. For
Windows XP, click the button labeled Defragment

Much like Scandisk, if the defragmenter is interrupted by other running software,

it must start again from the beginning. Some Windows 98/ME users may need to
run the defragment process in Safe Mode or use a utility such as EndItAll for the
process to complete successfully, as with Scandisk (see “Running Scandisk with
Windows 98/ME” section earlier in this chapter).
This process may take a long time, especially if you have a large or full hard
disk and haven’t done it in a long time (or ever!). Many people start to defragment
their hard disk, power off their monitor, and then go to bed. By the time they wake
up in the morning, the defragmentation process should be complete.
 CHAPTER 1: Temporary Files, Internet Cache, Scandisk 13

There are numerous third-party defragmentation programs available.

While each one claims it’s the most efficient, in my opinion, they are not
necessary. The built-in Windows defragmentation software gets the job
done well enough. While other programs might do a slightly better and/or
faster job, they don’t make enough of a difference to justify the added cost.

Summary
You’ve just learned how to safely remove unneeded files and free up precious hard
disk space. You’ve learned how and why to Scandisk and defragment your data,
and those words actually make sense to you!
I certainly don’t recommend running these utilities every day. The hard disk
must work very hard to defragment the data. This added wear and tear exceeds
the normal wear and tear of everyday use and could cause your hard disk to fail
prematurely. Generally speaking, for preventive maintenance, don’t run Scandisk
or the defragmenter more than once a week, but do run them at least once a month.
The Scandisk and Defragment utilities are generally considered to be preventive
maintenance. You never must run them, but you should. Being alerted to bad sectors
may be the only warning you receive before a hard disk fails. If you ever need
professional data-recovery services, the technicians will have a better chance of
recovering your data if the disk was recently defragmented prior to the failure.
Along with bad sectors, you won’t believe what nastiness may lurk on your
hard disk. In the next chapter, you’ll learn how to identify and eliminate it, taking
one more step in the direction of becoming a full-fledged computer guru!
This page intentionally left blank
 Chapter 2
Improving PC Performance
and Reliability
16 The Healthy PC

M any people discover that as time goes on, their PCs become more unstable
and less responsive. In this chapter, you’ll learn how to remedy the three
most common causes of these symptoms by locating and eliminating viruses and
spyware, along with learning how to locate and apply fixes and updates to your
Windows operating system. By the time you finish this chapter, your PC should
start up faster and run more reliably.

Locating and Eliminating Software Spies

There are essentially four different kinds of software: retail software, freeware,
shareware, and spyware. (In this book, I use the term software generically, to
describe all computer programs.)
Retail software is just what its name implies: software you must purchase,
either online or at a retail store.
Freeware is typically created by hobbyist programmers. They enjoy programming
and offer their creations to others for free, with no strings attached.
Shareware is typically a program that is partially or fully functional for a limited
period of time. The idea is that you get the opportunity to try the software out first
before committing to purchasing it. Making the software only partially functional,
or disabling the software after a certain period of time, motivates you to purchase
the product if you find it useful. (See Appendix F for a list of some of the most
useful freeware and shareware available, with brief descriptions and instructions
on how to get the software.)
Spyware (sometimes called Ad-ware) is the newest form of software. Here,
we’ll take a look at what it is and what we want to do with it.

What Is Spyware?
We currently live in an unusual economic climate. Software companies will pay
programmers to write programs, promote those programs, host huge Internet sites,
and give the software away for free. How can they afford to do that? With a little
twisted marketing logic, it’s easy. These companies include hidden programs
within their freely offered program. These hidden programs, called spyware,
monitor your Internet activity. They use your computer and your Internet
connection to send information about the web pages you have visited, as well
as your shopping preferences, back to the software company at regular intervals.
The companies can then sell this information to other companies. The other
companies can use that information to determine what kinds of items you might
be interested in purchasing, based on the web sites you visited and items you
 CHAPTER 2: Improving PC Performance and Reliability 17

have purchased in the past. In short, spyware is advertising-supported software.

In addition, spyware can change your Internet startup page and alter important
system files.
Of course, the companies that create this software don’t think they’re doing
anything wrong. After all, the user (that’s you) agreed to the terms and conditions
prior to downloading and installing the software. These terms and conditions are
typically presented in an End User License Agreement (EULA), and you must
acknowledge that you read and understood this agreement before you are allowed
to download or install the software. Most people never read the EULA. Those who
do read it usually have no idea what any of the legal mumbo jumbo actually means.
Windows XP has a 28-page EULA that, in part, reads, “You specifically agree
not to export or re-export the SOFTWARE PRODUCT (or portions thereof): (i)
to any country subject to a U.S. embargo or trade restriction; (ii) to any person or
entity who you know or have reason to know will utilize the SOFTWARE PRODUCT
(or portions thereof) in the design, development or production of nuclear, chemical
or biological weapons…”
As if anyone who would actually do this sort of thing would say, “Oh, I’m
not allowed to do this? I guess I can’t install the software. My plans are thwarted
again! Darn you, Microsoft!”
But hidden within the legal mumbo jumbo of a spyware company’s EULA is
your agreement to allow the company to place tracking software on your computer,
in exchange for some free software. You are also agreeing to let that software report
back to the company regularly at your expense (it’s using your computer and your
Internet connection). You are also agreeing to not hold the company responsible if
their software should cause any harm to your computer or data. Because you agreed
to the terms and conditions prior to downloading and installing the software, this is
considered legal.

What’s the Problem with a Little Advertising?

Not all advertising supported by software is bad. Some software can actually
be quite useful and be worth the tradeoff. However, a big problem is that many
programs that contain spyware cannot be uninstalled or do not completely
uninstall, leaving the tracking pieces behind. As you continue to download and
install free software, the spyware starts to accumulate on your PC. Instead of just
having one or two programs spying on you, it’s quite common to find more than
100! This typically results in your computer taking longer to start up (also called
booting), poor computer performance overall, reduced resources available to other
programs (see Appendix C to learn more about resources), as well as system
lockups and crashes, not to mention taking up valuable space on your hard disk.
18 The Healthy PC

To make matters worse, some of these spyware companies attempt to trick you
into downloading their spyware-laced software by displaying fake Windows error
messages that appear quite genuine. These fake messages may say things like:

Your Computer is Currently Broadcasting an Internet IP Address

Your Internet Connection Is Not Optimized
Your Current Connection May Be Capable of Faster Speeds

Figure 2-1 shows some examples of these fake messages. Once you click the
OK button, you are whisked away to the spyware company’s web site.

Windows is considered to be a graphical user interface, also known as a

GUI (pronounced “gooey”). It uses pictures (graphics) to communicate
(interface) with you (the user). A new term was coined to refer to the fake
error messages produced by Internet advertising companies. They are
known as a fake user interface, or FUI (pronounced “fooey”).

What might concern you the most about spyware is that you have no way of
knowing or controlling what information is being sent out from your computer. Sure,
the spyware companies claim they are not collecting any sensitive or identifiable
data, but how do you know that for a fact? The only way to know for sure is to
remove any and all traces of spyware from your computer!

FIGURE 2-1 Some Internet advertising that uses deceptive fake user messages to trick
people into visiting web sites
 CHAPTER 2: Improving PC Performance and Reliability 19

How Can You Locate and Remove Spyware?

There are numerous freeware and shareware utilities designed to help rid you of
spyware. Currently, there are two that stand out as better than the rest: Ad-aware,
by Lavasoft, and Spybot Search & Destroy, by PepiMK Software. Download and
install them to decide for yourself which one you like better, or better still, use
them both.

You will need an Internet connection to acquire this software. If you do not
have (and have never had) an Internet connection, then you will not have
downloaded any of this free software or fallen victim to web sites that install
spyware without your knowledge, and you can safely skip this section.

Once you detect and remove the spyware, be warned that the program the spyware
belonged to will usually stop working. At this point, you have two choices:

■ Go back to the company’s web site and re-download and reinstall the
software, knowing it will place some spyware on your computer.
■ Learn to live without that piece of software.

Web pages and software tend to change quite frequently over time. The
instructions here are for the version of the web page and software that
were currently available during the writing of this book. You should be
aware that your screen may not match the examples offered here because
some of the steps may have changed as the software is updated since the
publication of this book. The procedures shouldn’t change drastically as
the software is improved over time, and those changes should only make
the software easier to use.

To acquire and use the two spyware-removal utilities previously mentioned,

simply follow these easy steps:

Using Ad-aware
Our first stop will be the Ad-aware web site. To download and install Ad-aware,
follow these steps:

1. Click Start, and then click Run. In the window that appears, type
www.lavasoftusa.com. Then click OK.
2. On the web page that appears, locate and click Download.
20 The Healthy PC

3. Choose to download a copy of the current version of Ad-aware by clicking

one of the Ad-aware links listed under Full Install.
The Ad-aware software is stored in several locations throughout the Internet,
and each link on the downloads page takes you to a different place where
you can get the program. You can choose any one of the links to start your
download. If the download does not start for any reason, try again using
a different link.
4. The next window that appears warns you that, “Some files can harm your
computer. If the file information below looks suspicious, or you do not fully
trust the source, do not open or save this file.” Of course, we trust this source;
after all, we selected it. If this window ever appears unexpectedly, I would
recommend pressing the Cancel button. You are asked if you want to Open
or Save the file you are about to download. I suggest that you click Open.
When the download completes, the software will automatically start to install.
5. When prompted, click Next. The EULA appears. As always, satisfy
yourself that the EULA doesn’t contain anything that you feel can cause
you distress. Click Next to continue the installation.
6. The destination folder (where the software will install itself) is displayed.
Click Next here, and then click Next once more to begin the installation.
7. When the installation completes, click Finish.

Now that you have Ad-aware installed on your computer, you can run it to
remove any spyware you happen to have. Close any open windows, but keep your
Internet connection on. Then follow these steps:

1. Double-click the Ad-aware icon on your desktop.

2. Before scanning your computer, check to see if any Ad-aware updates are
available. Updates are extremely important because they instruct the software
what to define as spyware. Because spyware is written and changed on an
almost daily basis, the definitions change. Ad-awares’ database must be
updated prior to using it to recognize these latest forms of Spyware. On
the screen, locate and click the option Check for updates now, and then
click the Connect button. If an update is available, accept it by clicking
OK. Once the update is complete, click Finish.
 CHAPTER 2: Improving PC Performance and Reliability 21

3. The Ad-aware software has its own Start button. Click that button to start
the spyware-scanning process. Then choose Use default scanning options
and click Next.
The scanning process may take awhile, depending on the speed of your computer
and the size of your hard disk. Please be patient and allow it to complete. When
it has finished scanning your hard disk for spyware, your computer will buzz
(if you have speakers and they are turned on) and the top of the Ad-aware
window will say Scan Complete, as shown in Figure 2-2.
4. Click Next to see what Ad-aware found. Each item in the list should have a
check in the box next to it. You might want to take a moment to scroll through
the list and see if any of these items look familiar. Although I recommend
that you leave all the boxes checked, if there are any items you recognize
and do not wish to remove, you may uncheck the box next to it. If the items
listed are unchecked, you can easily place a check next to all of them by right-
clicking your mouse over a selection and choosing “Select all objects.”
5. Click Next, and when you are asked if you want to continue, click OK. All
of the spyware will be deactivated and placed into a quarantine file on your
hard disk, in case you want to reactivate any of it.
6. Close the Ad-aware program.

FIGURE 2-2 Ad-aware version 6.0 after its scan has completed
22 The Healthy PC

The Ad-aware program has some very useful and informative built-in help.
You can access this information at any time by clicking the Help button.

Using Spybot Search & Destroy

The other spyware-removal program you may want to download and run is Spybot
Search & Destroy. To download and install this program, follow these steps:

1. Click Start, and then click Run. In the window that appears, type
http://spybot.safer-networking.de. Then click OK.
2. On the web page that appears, locate and click Download.

3. Choose to download the current version of Spybot Search & Destroy by

clicking one of the links offered. If one is available, choose a link that says
“direct download.”
Like the Ad-aware software, the Spybot Search & Destroy software is
stored in several locations throughout the Internet, which you can access
through the download links on this web page. If the download does not
start for any reason, try again using a different link. The links that are
not labeled “direct download” offer other software as well. If a direct
download link is not available, click another link and look through the
list of available software to locate and select Spybot Search & Destroy.
4. You will be asked if you want to Open or Save the file you are about to
download. I suggest that you click Open. When the download completes,
the software will automatically start to install.
5. When prompted if you want to continue to install Spybot Search &
Destroy, click Yes.
6. When the welcome screen appears, click Next.

7. The EULA is displayed. As always, satisfy yourself that the EULA doesn’t
contain anything that you feel can cause you distress. Select I accept the
agreement and click Next to continue the installation.
8. The destination folder of where the software will install itself is displayed.
Click Next, and then click Install to begin the installation.
9. When the installation completes, click Finish.
 CHAPTER 2: Improving PC Performance and Reliability 23

Now you’re ready to run Spybot Search & Destroy. Close any open windows,
but keep your Internet connection on. Then follow these steps:

1. Double-click the Spybot Search & Destroy icon on your desktop.

2. Select the language in which you would like the program to be displayed.

3. A warning message explains that some programs that require spyware will
no longer run once you remove the spyware portion. Click OK.
4. Updates are extremely important because they instruct the software what
to define as spyware. Because spyware is written and changed on an almost
daily basis, the definitions change. The Spybot Search & Destroy database
must be updated prior to using it to recognize these latest forms of Spyware.
The next screen reminds you to check for program updates before scanning.
Click OK.
5. The next screen simply asks if you would like to remove the Spybot Search
& Destroy icon from your desktop, or if you would like to have Spybot
Search & Destroy start automatically when your computer starts. These
choices are entirely up to you. After you’ve chosen how you want the
program to behave, click Next.
6. Click Search for updates, and then click Download all available updates
if it is offered. If there are updates, the software will apply them and then
restart itself.
7. Once you are at the main program screen, click File, and then click Check
for problems.
8. When the check is complete, Spybot Search & Destroy will show a list of
the spyware items it found, as shown in Figure 2-3. Each item in the list
should have a check in the box next to it. You might want to take a moment
to scroll through the list and see if any of these items look familiar. Although
I recommend that you leave all the boxes checked, if there are any items you
recognize and do not wish to remove, you may uncheck the box next to it.
9. Click Fix selected problems to eliminate all of the recognized spyware
from your hard disk.
10. Close the Spybot Search & Destroy program.
24 The Healthy PC

FIGURE 2-3 Spybot Search & Destroy version 1.2 after it has completed scanning a
hard disk

The Spybot Search & Destroy program has some very useful and informative
built-in help. You can access this information at any time by clicking the Help
option at the top of the window.

Antivirus: Does This Look Infected to You?

You’ve probably already heard a lot about viruses and the potential harm they
can cause. The stories can be downright scary. It’s important to remember that a
computer virus is nothing like a human virus. A computer virus is just a program
that runs on your computer, like any other software. If you’re properly prepared,
you can detect and remove many viruses fairly quickly and painlessly.

What Can a Virus Do?

A virus is a program designed to automatically migrate to other computers, and it
can do so without any user interaction. Most viruses also carry a payload, which is a
separate set of instructions, typically designed to cause some kind of harm, such as:
 CHAPTER 2: Improving PC Performance and Reliability 25

■ Format your hard disk, which will result in the destruction of all data and
programs on the hard disk.
■ Place random messages on your screen, just to be annoying.
■ Delete random files from your hard disk.
■ Send random files from your hard disk to random people in your address
book, by using your e-mail program, without your knowledge.
■ Send itself to everyone in your address book, by using your e-mail program
without your knowledge.

These are only a few examples of the potential harm a virus can cause. Not all
viruses have payloads. Some viruses do nothing at all.
In April 1994, there were 3,000 known viruses. In May 1996, that figure grew
to 9,000. Today, there are more than 58,000 catalogued viruses, with 10 to 15 new
viruses discovered each and every day. To have a computer without antivirus software
installed is not just risky—it’s practically a guarantee that your computer will be
(or currently is) infected. It’s imperative that you update your antivirus software
constantly in an effort to keep yourself protected from the most recent viruses.

How Does Antivirus Software Work?

In order for antivirus software to work effectively, it must be told how to recognize
a particular virus. Consider how many post offices across the United States contain
posters with pictures of the FBI’s “most-wanted” criminals. The idea here is that if
you recognize the person in the photo, you’ll contact the FBI. If the posters were
never updated, the information would become obsolete over time. In much the
same way, antivirus software must be kept up-to-date with the equivalent of digital
fingerprints of the most recently discovered viruses, while at the same time still
remembering all the viruses of the past.
Since viruses never die or become extinct, the list can only grow larger. If your
antivirus hasn’t been updated recently (or ever!), your computer could be infected
even now!
There are also Trojans and worms, which many people consider to be in the
same category as a virus. A Trojan is a program that appears useful, but inside
lurks a nasty virus just waiting to be released. Remember the story of the Trojan
horse? That’s the source of this nasty software’s name.
A worm is a program that is designed to replicate itself in as many places as
possible: all over your hard disk, through your e-mail, across networks, on the
26 The Healthy PC

Internet, and even on floppy disks. Worms never take a break, and they work
extremely fast. They can tie up networks and cause crashes. Have you ever tried
to call a radio station to win a contest? Were you ever able to get through? So many
people dialing at once creates a never-ending busy signal. This is the equivalent of
what a worm can do to a network, or even to the entire Internet.

What Kinds of Viruses Are There?

Different kinds of viruses have different kinds of effects on your computer. These
are the main types of viruses currently being distributed:

■ Boot virus This kind of virus infects the very beginning of the hard disk.
It’s the first thing the computer sees when you turn it on, even before the
Windows screen appears. Boot viruses can be some of the most difficult
viruses to remove.
■ File infector virus This kind of virus attaches itself to certain types of
files across your hard disk. When you run that file, it activates the virus.
■ Macro virus This kind of virus attacks only applications—like Microsoft
Word, Excel, PowerPoint, Access, Lotus AmiPro, and so on. It is typically
harmless, causing problems that are usually just annoying and frustrating.
The virus activates only when the application it’s associated with is in use.
■ W32 virus This kind of virus infects Windows programs such as Notepad,
Solitaire (gasp!), and even your screensaver.
■ Script virus This kind of virus is often transferred by e-mail and is
actually embedded into the e-mail itself (like a tick on a dog). Sometimes,
just opening the e-mail to read it can cause your machine to become infected.
■ Multipartite virus This type of virus is a combination, typically, of a boot
virus and a file infector virus. You get two for the price of one!
■ Mutation or polymorphic virus This kind of virus can be any of the viruses
mentioned above, but it also attempts to elude detection by changing its
structure. Every time the virus starts, one of the first things it does is change
its “fingerprint.” Think of it as the chameleon of viruses.

Reading about all of these different types of viruses may make you nervous.
But don’t worry; with current antivirus software, you can protect yourself from
all viruses.
 CHAPTER 2: Improving PC Performance and Reliability 27

Darwinism: Why Do Viruses Exist

and Who Creates Them?
Why we have viruses is a difficult question to answer. Why do some people spray-
paint graffiti or make prank phone calls? Many viruses are written by young computer
adventurers, testing and expressing their programming skills and their curiosity to
see what can happen. Some do it to gain knowledge, some for fame, and some to prove
themselves worthy to join underground virus gangs. Others may write viruses because
they seek attention, revenge, or the challenge to defeat antivirus software. Other
virus creators may be bored, vandals, or sociopaths. The possibilities are endless.
Some virus writers don’t create viruses from scratch. In many cases, they’ll
take an existing virus and add or change a small part of it, thereby creating a new
virus, resulting in a twisted sort of virus evolution.
Some conspiracy theorists speculate that the antivirus software makers also
write some of the viruses. That certainly would help boost the sale and dependency
of antivirus software. However, there has never been any evidence that this has
occurred.

Virus creators are not considered to be hackers. Hackers are people who
enjoy pushing software to its limit in an effort to see what it’s capable of,
learning every detail about the software, with no intent to cause any harm.
They may be considered much like racecar drivers with their cars. They
are generally considered to be good guys.

Self-Defense: How Can I Protect Myself?

Here are some general guidelines that will help you to avoid getting a virus:

■ Install antivirus software and keep it updated.

■ Since most viruses are spread through e-mail, don’t accept files or
programs from people you don’t know.
■ Never activate any file that arrives in e-mail, even if it is from someone you
know, unless you have up-to-date antivirus software running at all times.
■ When uncertain about a file sent by e-mail, assume it’s a virus.
■ Only download files that are from a legitimate and respectable source.
28 The Healthy PC

■ When starting your computer, make sure there are no floppy disks inserted
into the floppy disk drive.
■ Keep your Windows operating system updated with the latest security fixes
(discussed in detail next).
■ Make sure your computer is free of viruses before you back up your data;
otherwise, you may be backing up the virus, too! (Making backup copies
of any important files on your computer is the best thing you can do to
protect yourself, as discussed in Chapter 9.)

The two most successful and reliable antivirus programs are McAfee VirusScan
and Norton AntiVirus. Figure 2-4 shows an example of a Norton AntiVirus window.
While there are literally dozens of antivirus programs available, these are the two
that detect the largest number of viruses consistently. Not all antivirus software is
created equal.
If you simply cannot afford to buy either the McAfee or Norton program, you
can download a fully functional copy of AVG antivirus for free from www.grisoft.com.
It may not be as refined or as reliable as the commercial programs, but something is
better than nothing. (For more information about AVG antivirus, see Appendix F.)

FIGURE 2-4 A Norton AntiVirus software window

 CHAPTER 2: Improving PC Performance and Reliability 29

This Old Windows

When programmers write software, they must be careful to watch for loopholes (or
bugs) in their code that could cause the program to not behave as it should (or crash).
If I were to leave out a very important chapter of this book, that would be
considered an oversight. In computer language, we call that a bug.

A Bug’s Story
The most famous bug to date was known as the Y2K bug. This bug wasn’t
actually a programming mistake, but an oversight by bureaucratic managers
who failed to properly follow up on decisions they made years before.
Initially, when computers were first used in businesses, memory and hard
disk space were at a premium. The programmers were instructed to save as
much space as possible by writing software as efficiently as they could. One
way to save space was to assume that the first two digits of any year entered
into the computer would always be 19. Because computers were new and
technology was evolving quickly, it was assumed this software would be
replaced or updated long before the year 2000. However, because the software
continued to meet the company’s needs year after year, few were willing to
spend the money to fix something that wasn’t broken. Once companies were
reminded of the way in which the software was written many years ago, most
of them had no idea whether or not this bug would affect them without first
doing research.
Your phone bill is an example of how important the date can be. When you
make a long-distance call or use a cellular phone, you are billed for the length
of time that call lasted. A computer does this automatically. It’s programmed to
record the exact date and time that you initiated the call and when you terminated
the call. It’s then programmed to subtract the start time from the end time to
determine how many minutes you used. In relation to the Y2K bug, consider
what would happen if you placed a phone call before midnight in 1999 and
didn’t end that call until after midnight of the year 2000. If the program were
instructed to use only the last two digits of the year, it would derive a negative
number (subtracting 99 from 00 results in –99!). The software wasn’t designed
to work with negative numbers, and things would start failing as a result. The
billing system couldn’t create bills, because the information it was provided would
be invalid, which means the printers couldn’t print the invoices, and so on.
30 The Healthy PC

If the software were to stop functioning, we would call this a crash. In some
cases, a crash is caused by a bug, but there are other reasons for crashes. (Be
grateful this terminology exists only with computers. Imagine if your car would
crash when you hit a bug!)
Sometimes, programmers write a piece of software designed to fix another
piece of software. We call that an update or a patch. Software is usually given
a version number, so you can tell whether your software has all the patches. The
alternative to patching the software would be to completely uninstall the program,
obtain the complete and latest version of that program, and then completely
reinstall it.

As programs become easier to use, they require more programming code,

which results in more internal complexity. That results in more opportunity
for bugs and unrecognized interactions to exist and for crashes to occur.
In fact, attempted fixes for bugs sometimes introduce new bugs!

Since Windows 98, Microsoft developed a unique way to keep Windows

up-to-date by introducing the Windows Update web site. Theoretically, if your
software is kept up-to-date, your computer will run and work better.

What Kinds of Updates Are There?

Microsoft offers a number of different types of updates. All of these are available
through its Windows Update web site:

■ Critical updates and service packs These are typically patches designed
to keep your computer stable and secure. They are considered to be critical
to the operation of your computer. When several individual updates are
combined into a single package, it is referred to as a service pack.
■ Recommended downloads These are typically enhancements designed
to increase ease of use and versatility of Windows and many programs
that work with Windows.
■ Windows tools These are typically utilities and other software tools
designed to enhance performance and facilitate upgrades.
■ Internet and multimedia updates Just as the name implies, the latest
versions of Internet Explorer and Windows Media Player are offered
here, when they are available.
 CHAPTER 2: Improving PC Performance and Reliability 31

■ Additional Windows downloads These are updates for your desktop

settings and other Windows features.
■ Multi-language features These updates implement the use of other
languages in your Windows menus and dialog boxes.
■ Driver updates A driver is a specific piece of software that tells a specific
version of Windows how to communicate with a specific piece of hardware.
Your modem, printer, video card, and sound card all require their own specific
drivers to work properly within Windows. An inefficient driver can affect
the performance and reliability of Windows, so it’s important to install the
latest drivers available to ensure your computer is running optimally.

How Do I Stay Current?

You can visit the Windows Update web site to see what updates are available, read
about what they do, and choose which ones you would like to get. Then you can
download and install your selected updates.
To use the Windows Update web site, follow these steps:

1. Click Start, and click Run. In the window that appears, type
www.windowsupdate.com, and then click OK. (Alternatively,
you can choose the Windows Update option in your Start menu.)
If this is your first visit to the Microsoft Windows Update web site, or if
you haven’t been there in quite some time, a message will appear, similar
to one shown in Figure 2-5. Microsoft is asking you for permission to install
a small Internet program (called an ActiveX control) that can analyze your
computer to determine which operating system you have, what hardware
you are using, and which updates you are missing.
2. Click the Scan for updates link. A progress indicator will keep you
informed of the status of the scan. Once it completes, if you require any
updates, it will show those on the left side of the window, grouped into
categories, as shown in Figure 2-6.
3. Any critical updates your computer is missing will be selected automatically.
To acquire them, click Review and install updates, and then click the
Install Now button.
Be aware that some updates may need to be installed before other updates
can be installed. If more than one critical update is available, it’s quite
32 The Healthy PC

FIGURE 2-5 The dialog box that appears when you visit the Microsoft Windows
Update web site for the first time

FIGURE 2-6 Windows Update showing numerous available updates

 CHAPTER 2: Improving PC Performance and Reliability 33

possible you will receive a warning message, similar to one shown in

Figure 2-7, stating that a specific update must be installed on its own first.
Simply click OK if you receive this message, and the Windows Update site
will automatically cancel the other updates.

If you install critical updates, you will most likely be prompted to restart
your computer after the download and install process. Make sure you have
saved any work and quit all programs before choosing to restart the computer.

4. After this update process has completed successfully, click OK when asked
to restart your computer.

Once you have successfully applied all of the critical updates and restarted
your computer, you may find that the Windows Update web site now shows some
new critical updates for your computer. This happens when there is an update to an
update. After you restart your computer—after installing an update from the Windows
Update web site—be sure to return to the Windows Update web site. Keep checking
until there are no more critical updates available.

How Can I Find Out about New Critical Updates?

Critical updates are crucial to keeping your computer secure and as bug-free as
possible. But how do you know when new critical updates become available?
Since the release of Windows 98, Microsoft included a utility within Windows
that will periodically check to see if your computer is missing any available critical
updates. This is the recommended way to keep your computer up-to-date from now on.

Ironically, Microsoft has even released an update to its critical update

notification feature. You may have seen this while visiting the Windows
Update web site.

FIGURE 2-7 A message that appears when an update needs to be installed separately
34 The Healthy PC

To activate automatic notification of critical updates, follow the easy steps for
your particular Windows system.

For Windows 98
The Critical Update Notification feature for Windows 98 can only be enabled or
disabled; no other options are available. To enable Critical Update Notification,
just download it from the Windows Update web site.
After you have downloaded and installed Critical Update Notification, it will
check for updates every five minutes when your computer is connected to the Internet,
and it will alert you when new critical updates are available, as shown in Figure 2-8.
(If you later want to disable Critical Update Notification, you must uninstall it
using the Add/Remove Programs icon in the Control Panel.)

For Windows ME
Windows ME improved on the Windows 98 Critical Update Notification system
and changed its name to Automatic Updates. To reduce user intervention, when
new critical updates become available, Windows ME will automatically download
them. Microsoft also added more options for the user to customize. Here are the
steps for using this feature:

1. Click Start, click Settings, and then click Control Panel.

2. Double-click Automatic Updates.

3. Select Automatically download updates and notify me when they are

ready to be installed.

FIGURE 2-8 A Microsoft Critical Update Notification alert in Windows 98

 CHAPTER 2: Improving PC Performance and Reliability 35

4. Click OK and close the Control Panel.

5. After you have activated Automatic Updates for the first time, a small
globe icon appears next to the clock on the right side of the Taskbar.
Click this icon.
6. You are prompted to read and accept the EULA. The Automatic Updates
process will not start until you have accepted the EULA. If you choose to
not accept the EULA, Automatic Updates will not work.

When Automatic Updates discovers an update is ready to be installed, a message

will appear briefly above the clock on the right side of the Taskbar, and the small
globe icon will reappear. When you click on this message or on the small globe
icon, you’ll see a dialog box, similar to the one shown in Figure 2-9, which contains
the following three buttons:

■ Settings This is where you can customize the Automatic Updates

process. (This is the same screen that appears when you double-click
on the Automatic Updates icon in the Control Panel.)
■ Remind Me Later Think of this as a snooze button for the Automatic
Updates process. You can specify that Windows remind you later, so that
an update installation does not interfere with your current computer activity.
■ Install Begins the installation process of the updates.

For Windows XP
Windows XP offers the Automatic Updates feature through its System Properties
dialog box. Follow these steps to turn it on:

1. Click Start, click Control Panel, and then double-click System.

2. Click the tab labeled Automatic Updates.

3. Place a check in the box next to Keep my computer up-to-date. With

this setting enabled, Windows Update software may be automatically
updated prior to applying any other updates.
4. Select the option Download the updates automatically and notify me
when they are ready to be installed.
5. Click OK and close the Control Panel.
36 The Healthy PC

FIGURE 2-9 An Updates dialog box in Windows ME, which appears after you click the
globe icon (shown in the lower-right corner) when new critical updates
are available

After you’ve turned on this feature, when Automatic Updates discovers an

update is ready to be installed, a message will appear briefly above the clock on
the right side of the Taskbar, and a small globe icon will also appear. When you
click on this message or on the small globe icon, you’ll be offered the option to
see details or to install the updates. If nothing happens when you click the globe
icon, that means the update is still being retrieved from the Internet. Try again
in a few minutes.

Summary
In this chapter, you’ve learned what spyware is, why it exists, how you get it, how
to locate it, and how to remove it. Then you learned how to keep nasty viruses off
your system and why it’s so important to be virus-free. You also discovered why
software updates are so important and how to configure Windows to alert you as
soon as new critical updates become available.
Now you can use the words Trojan, worm, bug, crash, driver, and hacker in
sentences that you can actually understand. You also know what EULA, GUI, and FUI
stand for. But wait, don’t purchase that geeky propeller hat just yet. In the next chapter,
you’re going learn all about the Internet, starting with getting around on it faster!
 Chapter 3
Optimizing Your
Internet Connection
38 The Healthy PC

T he Internet can be a wonderful and magical place, but for many of you, that
place may seem distant. It’s a lengthy trip from your computer to your favorite
web site. In this chapter, I’ll show you how to configure your Windows settings to
use your Internet connection as efficiently as possible.

There are literally hundreds of software titles available that make grand claims
about increasing your Internet speed. Ironically, you can even download software
that claims to speed up the downloading of software. Some of these programs are
free, and some are available for a charge. Unfortunately, few of these programs
actually make any difference at all in your Internet speed.
Using high-octane gasoline in an economy car may result in a slight performance
difference. Installing a larger engine, on the other hand, will definitely improve
performance. Whether you connect to the Internet using your telephone line and
a modem (economy car) or you have a high-speed DSL (Digital Subscriber Line),
broadband cable, or satellite connection (race car), the tips in this chapter will
ensure you’re getting the most from it.

For Dial-Up Modem Users Only

There are many different speeds of modems. Just as cars with larger engines
have more power, modems with higher connection speeds will transfer data faster.
Without going into too much detail, you most likely have a 14.4k, 28.8k, 33.6k, or
56k modem. (The k is short for thousand, or “000,” and is borrowed from the metric
measurement of kilo.) The smaller the number, the slower the modem. Since your
Internet service provider (ISP) charges you the same price regardless of your modem
speed, it makes sense to have the fastest modem possible.

What Does 56k Actually Mean?

No 56k modem will ever connect literally at 56k. Any connection over 33.6k is
considered a 56k speed because it requires a 56k-capable modem. In order for your
modem to connect at 56k speeds, it must communicate with another modem using
the same type of 56k technology that your modem supports. As explained in the
previous section, there are currently four different 56k standards—X2, K56flex,
V.90, and V.92—and three of them are incapable of communicating with one
another at speeds higher than 33.6k.
 CHAPTER 3: Optimizing Your Internet Connection 39

56k Modem Incompatibilities Explained

When 56k modems were first introduced in 1996, there were two competing
standards. One was called K56flex, introduced by Lucent Technologies and
Rockwell Semiconductor. The other was called X2, developed by U.S. Robotics.
The International Telecommunications Union (ITU), a standards committee,
needed time to determine which one of these 56k technologies should be the
standard. Because both technologies worked equally well, combined with the fact
that there were millions of consumers who were eager to pay for faster modems,
the companies felt they could not wait indefinitely for the ITU to decide on a
standard. As a result, each company began selling and marketing its product to
the public.
Because a 56k K56flex modem was incompatible with a 56k X2 modem,
in order to achieve a 56k connection, your ISP needed to provide the same type
of 56k implementation that your modem supported. This was very confusing
for consumers, and often resulted with ISPs needing to provide multiple access
numbers dedicated to supporting each technology. Many consumers purchased
a 56k K56flex modem, only to find out that their ISP only supported X2, or
vice versa.
It wasn’t until almost two years later, in February 1998, that the ITU finally
agreed on a universal standard to be used for 56k connections over telephone
lines. They called it V.90. Now there were three different types of 56k modems!
But wait, there’s one more! Late in the year 2000, the ITU approved three
enhancements to 56k and called this newest standard V.92.

56k Modem Facts

Just because you have a 56k modem doesn’t necessarily mean you wouldn’t benefit
from replacing it. Here are some facts you should know about 56k modems:

■ A 56k modem will connect no faster than 53k because it would exceed
telephone line power consumption rules set forth by the Federal
Communications Commission (FCC).
■ A 56k speed may not be possible on everyone’s telephone lines. Some
older wiring that still exists may not be capable of carrying a 56k signal.
40 The Healthy PC

■ A 56k connection using the K56flex, X2, or v.90 standard will affect your
download speed only. When uploading, your data is still sent at the slower
33.6k speed. In other words, your computer can retrieve data almost twice
as fast as it can send data.

56k V.92 Modem Facts

Here are some facts that pertain to 56k V.92 modems:

■ When you upload data, it can go as fast as 48k. This means that you can
send files at nearly twice the speed of the older V.90 standard.
■ If you have call waiting provided by your telephone carrier, you can install
modem-on-hold software (usually included with your new V.92 modem or
available for download from your modem’s manufacturer) that will notify
you if there is an incoming call. This allows you to take the incoming call
while placing your Internet connection on hold. When you’re finished with
your call, your computer is instantly back online.
■ When your computer connects to another computer, that initial noise you
might hear is called a handshake. The old K56flex, X2, and V.90 handshake
lasts 25 to 30 seconds, which is the time it needs to test the line to see if
it’s capable of a 56k speed. The length of time the handshake requires
with a V.92 modem has been reduced to about half.
■ A V.92 modem will connect just fine to a V.90 modem, but the unique
features of V.92 will not be available during that connection.

How Can I Determine Which Modem I Have?

Through the Windows Control Panel, you can get information about your modem.
The specific steps depend on which Windows version you have.

Checking the Modem Type on Windows 98/ME Systems

To discover which modem you have installed on your Windows 98/ME computer,
follow these steps:

1. Click Start, click Settings, and then click Control Panel.

 CHAPTER 3: Optimizing Your Internet Connection 41

2. Double-click the icon labeled Modems. The brand and speed of your
modem will be displayed in the dialog box, as shown in Figure 3-1.
If you have a 56k modem and are now wondering if you have X2, K56flex,
V.90, or V.92, continue as follows:
3. Click the tab labeled Diagnostics.

4. Click the COM port designated to the modem, as shown in Figure 3-2.

5. Click the button labeled More Info.

6. Your computer will query the modem, and then will display a screen full
of responses from the modem. You will need to scroll through this list of
“modem-speak,” as shown in Figure 3-3, and look for the term X2, K56flex,
V.90, or V.92 to determine the type of 56k your modem supports.
7. When you are finished, click OK.

8. Click OK and close the Control Panel.

FIGURE 3-1 The General tab of the Modems Properties dialog box in Windows 98
42 The Healthy PC

FIGURE 3-2 The Diagnostics tab of the Modems Properties dialog box in Windows 98

FIGURE 3-3 Scrolling down to nearly the bottom of the page shows that this modem
supports “V32bis, V.34+, X2, V.90…”
 CHAPTER 3: Optimizing Your Internet Connection 43

Checking the Modem Type on Windows XP Systems

To see which modem you have installed on your Windows 98/Me computer,
follow these steps:

1. Click Start, and then click Control Panel.

2. Double-click the icon labeled Phone and Modem Options.

3. Click the tab labeled Modems. The brand and speed of your modem will
be displayed in the dialog box that appears similar to Figure 3-4.
If you have a 56k modem and are now wondering if you have X2, K56flex,
V.90, or V.92, continue as follows:
4. Click the button labeled Properties.

5. Click the Diagnostics tab, and then click the button labeled Query Modem.

6. Your computer will query the modem, and then will display a screen full
of responses from the modem, similar to what is shown in Figure 3-5. You
will need to scroll through this list of “modem-speak” and look for the term
X2, K56flex, V.90, or V.92 to determine the type of 56k your modem supports.

FIGURE 3-4 Phone and Modem Options screen from Windows XP

44 The Healthy PC

FIGURE 3-5 Modem properties page and Query response as seen in Windows XP

7. When you’re finished, click OK.

8. Click OK and close the Control Panel.

How Can I Get a Faster Connection?

If you do not currently own a 56k modem, or if your 56k modem is not V.90- or
V.92-compliant, you should upgrade it. Because of the popularity of high-speed
(also called broadband) Internet connections, the price of modems has come down
tremendously. It’s not uncommon to find new 56k V.92 modems available for less
than $30.
In Chapter 10, you’ll learn just how easy it can be to replace your modem.
This will have a much greater impact on your Internet connection speed than
any tune-up or software could ever provide.
Regardless of your modem speed, there are some settings you can change to
take advantage of the best performance possible from your modem and computer.
Again, the steps depend on which Windows system you have.
 CHAPTER 3: Optimizing Your Internet Connection 45

Adjusting Modem Settings on Windows 98/ME Systems

To change modem settings on your Windows 98/ME computer, follow these steps:

1. Click Start, click Settings, and then click Control Panel.

2. Double-click the Modems icon.

3. Click the button labeled Properties located in the middle of the window
(Do not click the Dialing Properties button located at the bottom of the
window.)
4. Ensure that your Maximum speed is set to 115200.

5. Click the tab labeled Connection, and then click the Port Settings…
button.
6. Ensure Use FIFO buffers (requires 16550 compatible UART) has
a check placed in the box next to it.
7. Windows 98 users, set your Receiver Buffer and your Transmit Buffer
to High and click OK. Windows ME users, set your Receiver Buffer and
your Transmit Buffer to Maximum and click OK.
8. Click the Advanced button. The next dialog box that appears should look
like the example in Figure 3-6.

FIGURE 3-6 Recommended modem settings in Windows 98/ME

46 The Healthy PC

9. Ensure a check is placed next to Use error control, no check is placed next
to Required to connect, and a check is placed next to Compress data.
10. Ensure a check is placed next to Use flow control and that Hardware
(RTS/CTS) is selected.
11. Make sure Modulation Type is set to Standard.

12. When you’re finished, click OK.

13. Click OK and close the Control Panel.

Adjusting Modem Settings on Windows XP Systems

To change modem settings on your Windows XP computer, follow these steps:

1. Click Start, and then click Control Panel.

2. Double-click the icon labeled Phone and Modem Options.

3. Click the Modems tab and click the Properties button.

4. Click the Advanced tab and click the Advanced Port Settings… button.
The next dialog box that appears should look like the example in Figure 3-7.
5. Ensure Use FIFO buffers (requires 16550 compatible UART) has
a check placed in the box next to it.

FIGURE 3-7 Recommended modem settings in Windows XP

 CHAPTER 3: Optimizing Your Internet Connection 47

6. Set your Receive Buffer and your Transmit Buffer to High.

7. When you’re finished, click OK.

8. Click OK and close the Control Panel.

How Fast Is My Modem Connecting?

Your modem can be instructed to report the communication speed between itself
and your computer (DTE, for data terminal equipment) or the speed between itself
and another modem (DCE, for data communication equipment). If your modem
reports that you are connecting at 38,400, 57,600, or 115,200, it’s reporting the
DTE speed. You will need to refer to your modem documentation or contact your
computer manufacturer’s technical support to find out how to instruct the modem
to report the DCE speed instead.
If you use America Online (AOL), the speed is reported immediately during
the logon process. Alternatively, once you’re at the main AOL Welcome screen,
simply click Help (located at the top of the window), click About America Online,
and then, while holding down the CTRL button on your keyboard with one finger,
press the letter Y on your keyboard with another finger; then release both buttons.
The window that appears should look similar to Figure 3-8. It contains your connection
status information, including your current connection speed.
For all other Internet connections, you should see a graphic of two tiny computer
screens next to the clock in your system tray, which is located on the right side of
your Taskbar, as shown in Figure 3-9. If you double-click this icon, a window will
appear showing your connected speed.

FIGURE 3-8 An AOL connection status window, showing a current connection speed
of 40,000
48 The Healthy PC

Connection
rate

Two Computers
icon

FIGURE 3-9 Dial-up connection information in Windows ME

It is quite common for your connection speed to vary each time you
connect. How the call is routed by the telephone company will determine
if your ride is a smooth one (high connection rate) or a bumpy one (low
connection rate).
If you have a 56k modem and the number you see is 36,000 or higher, you are
connecting at a reasonable 56k speed. If your 56k modem connection speed is below
36,000, disconnect and redial. If your connection is consistently below 36,000,
here are some other things you can check:
■ A broken or frayed telephone cord running from your computer to the wall
can affect connection quality. Make sure it is a good, clean cord. If you are
uncertain, replace it with a new one.
■ You can call your local telephone company and ask them to run a free line
test on your telephone line. If they detect any noise on the line, it’s their
responsibility to fix it if the problem is located outside your home (unless you
have the optional telephone line insurance, which will cover the cost, regardless
of the source of the problem). Many times, after it rains, an exposed telephone
wire will become wet, and your connection speed will suffer until it dries. This
is the best time to call the telephone company and request a line test.
■ Most ISPs offer numerous local telephone numbers to connect to their
service. Try different access numbers until you find one that works fastest
for you.
■ Consider replacing your modem, especially if it’s over two years old.
Remember that just because it appears to be working, doesn’t necessarily
 CHAPTER 3: Optimizing Your Internet Connection 49

mean it’s working correctly. You’ll find details on how to pick the right
modem and install it in Chapter 10.
■ Prevent the transmission of unnecessary information. Internet pop-ups,
spam, viruses, advertisements, and spyware can clog your Internet pipeline.
All of this is discussed in detail in Part II of this book.

If your connection speed is good, but the Internet is still sluggish, it may
just be the Internet. There are times, similar to rush hour on a freeway,
when the Internet has more traffic. However, if it’s always sluggish, complain
to your ISP. Sometimes an ISP can have more customers than they have
available bandwidth.

For Broadband Cable Modem,

DSL Modem, and Satellite Users Only
Your Internet speed may seem fast, but there’s a good chance your computer is not
configured to use the full potential of your Internet connection. Fortunately, there
are free services on the Internet that can analyze your computer configuration, test
it, and then make recommendations.

How Can I Check My Internet

Connection Configuration?
You can tweak your Internet connection configuration as follows:

1. Click Start, and then click Run. In the window that appears, type
ww.dslreports.com/tweaks and click OK.
2. Toward the bottom of the page that appears, you’ll see a small window
labeled Tweak Tester II. Below this window, click the button labeled
Start to begin the test.
3. When the test completes successfully, when instructed to do so, click the
Results button.
4. The next screen that appears requires some information from you:
■ Service This is a drop-down list in which your choices are displayed.
If you are uncertain about what kind of service you have, contact your
ISP’s technical support.
50 The Healthy PC

■ Speed This is how fast your ISP says your connection is. It may be
on a recent invoice, or you may have to contact their technical support
to find out. Typical speeds are 128k, 256k, 640k, 1MB, 1.5MB, 2MB,
or 3MB. If you have a 640k connection, type 640 in this window. If
you have a 1MB connection, type 1000 in this window.
■ Operating System Choose the operating system you are currently
using from the drop-down list.
■ Connection For most people, you will leave this at Normal.
However, if you are unsure what kind of connection you have,
contact the technical support department of your ISP.
Once you have answered these four items, click the Recommend button.
5. The screen that appears will be chock-full of information. Since most of
this information is technical, the test makers help you by placing an icon
below their Notes and Recommendations. You want to see little happy face
icons under all of their Notes and Recommendations. If you have anything
other then happy face icons, follow the steps to correct your computer
configuration.
6. Once your configuration changes are complete, restart your computer and
run the test again.
7. Repeat this process until only happy face icons appear under the Notes and
Recommendations sections.

Now you know your computer is utilizing your Internet connection as efficiently
as possible, and you didn’t need to spend a penny!
As an alternative to this method, you may visit www.SpeedGuide.net and click
the TCP/IP Optimizer link. When offered, choose to Open the program. Once
your download completes, click the option for Optimal settings (found at the
bottom of the window that will appear), and then click the Apply changes button.
Your computer will need to be restarted for these changes to take effect. You can
find numerous other Internet speed tips, tweaks, and enhancements on this web
site. Try them at your own discretion.
 CHAPTER 3: Optimizing Your Internet Connection 51

How Can I Determine My Internet Speed?

There are several web sites on the Internet that can measure the data-transfer
speed of your Internet connection. Here are a few options for testing your
Internet speed:

■ Click Start, click Run, type www.2wire.com, and click the Bandwidth
Meter link.
■ Click Start, click Run, type www.dslreports.com/stest, and follow the
on-screen directions.
■ Click Start, click Run, type http://computingcentral.msn.com/Internet/
speedtest.asp, and follow the on-screen directions.

There are a number of variables that can affect the speed that is reported,
such as your distance from the testing web site and how busy the testing
web site is. Run the speed test a few times over the course of a day and
average the scores. The average speed should be close to what your ISP
advertises.

Summary
In this chapter, you learned how to get the most for your money by optimizing
your Internet connection, but there’s still more work to be done. Computers have
the ability to multitask, which means they can do many things at the same time.
Your computer may be continuously sending and receiving information over the
Internet without your knowledge or permission. Next, you’ll learn how to put an
end to those annoying pop-up ads, spam, other forms of Internet advertising and
unwanted “visitors” that tie up your connection, your computer, and your patience.
This page intentionally left blank
 Part II
Internet 101
This page intentionally left blank
 Chapter 4
Internet Cookies, Temporary
Internet Files, and Pop-ups
56 The Healthy PC

A s if keeping your computer operating properly wasn’t enough, advertisers on

the Internet like to utilize it to do their bidding, too. They love it when your
computer is fast, powerful, and responsive! They’ll use as much of your computer
and your Internet connection, which you unknowingly allow, hawking their wares
and even attempting to scare you into purchasing their products. They may even
be so bold as to advertise a product that gives you control over how to stop all
advertisements! To make matters worse, they can typically make a perfectly functional
computer very frustrating to use. Of course, once they’ve “warned” you about all
the “dangers” of not having their product, it leaves you confused about whether
what they said is true or not. Who do you believe? With all the recent talk of Internet
cookies, temporary Internet files, and pop-ups, you must need to buy something to
protect yourself, right? WRONG! This couldn’t be further from the truth. Put away
your wallet, because you’re about to learn how to end all of this nonsense and take
back control of your own computer.

Internet Cookies
Cookies have received a lot of bad publicity and, as a result, many people want to
know how to remove them from their computer. First, you need to understand that
having Internet cookies on your computer is not necessarily a bad thing.
An Internet cookie is typically used to remember specific information about
the last time you visited a particular web site. For example, when you visit a web
site where you shop, it may place items you have selected to purchase into a virtual
shopping cart. If you exit the web site without purchasing any of the items you
placed in the shopping cart, it will remember the contents of your shopping cart
the next time you visit.
Thanks to Internet cookies, you can specify your personal preferences of features
that a web site may offer, such as to display the current weather conditions of the
city you live in or to automatically enter your user name and password if one is
required for that particular web site. Then, each time you visit that web site in the
future, it automatically recalls your preferences. These types of cookies are called
first-party cookies.
There are also session cookies, which are temporary cookies that exist only
while you are currently visiting a web site. Once you leave that web site, the
cookie is removed.

How Do Internet Cookies Work?

When a web site remembers your preferences, it does so by saving that
information on the web site’s computer, and then assigns that information
 CHAPTER 4: Internet Cookies, Temporary Internet Files, and Pop-ups 57

a unique identification tag. The web site places only the identification tag
information on your computer, using a very small text file with a unique name.
The next time you visit that web site, it checks to see if you have this text file
on your computer, and if so, what identification tag it contains.
A common misconception is that an Internet cookie is a program that web sites
place on your computer to collect data at will about your computer usage. An
Internet cookie is not a program, and it cannot read any data from your hard disk,
including the data stored in other cookies. Also, no other computer can read the
cookie except the one that gave it to you. The only information a cookie will ever
contain is information you specifically provided.
Simply put, an Internet cookie is a unique tag that is placed on your computer
that essentially says, “You were here.” It’s a simple way you can identify yourself
to web sites you visit. Any information associated with your identity is kept on the
web site’s computer.

So What’s All the Fuss About?

There are several clever, unscrupulous marketing companies that add cookies to
their Internet advertisements. If you visit a web site that contains one of these
advertisements, the advertisement places a cookie on your computer. These are
referred to as third-party cookies.
Once you have a third-party cookie stored and happen to visit another site that
uses the same marketing company, it will recognize the third-party cookie on your
computer and be able to determine not only what page you were visiting when it
recognized you, but also your computer’s IP (Internet Protocol) address. The marketing
companies won’t know what you do with the pages you view, but from knowing
what pages you visit and how often, they can target specific advertisements to appear
on your screen that they think you will be interested in based on that information.
This isn’t the same as collecting personal information such as your e-mail address
or tracking your every move when you are online.

The act of being on the Internet is commonly referred to as being online.

Saying, “I am currently on the Internet” or “I am currently online” is
the same thing.

Taming the Cookie Monster

As previously mentioned, Internet cookies aren’t all bad. Using a spyware
detection and removal utility, such as those discussed in Chapter 2, will help
eliminate the bad cookies while leaving the good cookies alone.
58 The Healthy PC

Why Are They Called Cookies?

While many rumors abound, it is commonly believed that the term cookie comes
from a prank program called Cookie, which was invented at MIT around 1970.
The program was based on the Cookie Monster character from the Children’s
Television Workshop television program “Sesame Street.” The Cookie Monster
was always on the lookout for more cookies, and he would quite often say to
anyone, “Give me a cookie!”
When this Cookie software was activated on an unsuspecting person’s
computer, it would randomly interrupt whatever the person was doing with the
demand, “Give me a cookie!” The person then had to type the word cookie to
make the program go away (temporarily). If the user typed anything other than
the word cookie, the software would just repeat itself and prevent the user from
continuing work until its demand was met. So, from this practical joke program,
cookie metaphorically came to mean something given on demand to a remote host.
The politically correct computer nerds do not like the term cookie. They
believe a cookie is nothing more than a nondescriptive, meaningless, misplaced
name for the more accurate computer term, token.
As you struggle to understand computers, keep in mind that many seemingly
complicated terms, such as cookie, aren’t really complicated at all. For example,
before the World Wide Web, a Gopher server was a standard way for files and
information to be made available on the Internet. It was called a Gopher because that
was the mascot of the University of Minnesota, where it was invented. An archive
searching software engine was named Archie, and improvements to it were named
Jughead (Jonzy’s Universal Gopher Hierarchy Excavation And Display) and
Veronica (Very Easy Rodent-Oriented Net-wide Index to Computerized Archives).
If you have a scanner attached to your computer, you most likely installed a
TWAIN driver. TWAIN stands for Technology Without An Interesting Name.
Those terms don’t seem so serious and complicated anymore, do they?

Blocking Third-Party Cookies

Since prevention is always the best medicine, you’ll learn how to configure your
computer to accept only first-party and session cookies, and to deny all third-party
cookies. Follow these steps to block only third-party cookies:

1. For Windows 98/Me, click Start, click Settings, and click Control Panel.
For Windows XP, click Start and click Control Panel.
2. Double-click the icon labeled Internet Options.
 CHAPTER 4: Internet Cookies, Temporary Internet Files, and Pop-ups 59

3. Click the Privacy tab and click the button labeled Advanced.

4. Place a check in the box next to Override automatic cookie handling.

5. Select Allow under First-party Cookies.

6. Select Block under Third-party Cookies.

7. Place a check in the box next to Always allow session cookies. Your
screen should now look like Figure 4-1.
8. Click OK, click OK, and close the Control Panel.

Deleting Cookies
If you want to, you can delete all Internet cookies from your computer. However, keep
in mind that since an Internet cookie enters your name and password automatically
to specific web sites that require such information, you will be required to enter
your name and password manually on future visits to these web sites after you’ve
erased all Internet cookies from your computer.
To erase all Internet cookies from your computer, follow these steps:

1. For Windows 98/Me, click Start, click Settings, and click Control Panel.
For Windows XP, click Start and click Control Panel.
2. Double-click the icon labeled Internet Options.

3. The General page opens. Click the Delete Cookies… button, which is in the
middle of the page, under Temporary Internet files, as shown in Figure 4-2.

FIGURE 4-1 How to block “bad” cookies but allow the “good” ones
60 The Healthy PC

FIGURE 4-2 Using the Internet Properties dialog box to delete all Internet cookies

4. You will be asked if you wish to proceed or cancel this request. Click OK
to proceed if you are sure you want to permanently delete all Internet cookies
(good and bad) from your computer.
5. When the process is complete, click OK, and then close the Control Panel.

Temporary Internet Files

When you visit a web site, all of the graphics (pictures) and text (information) that
appear on your screen are saved to a dedicated area on your hard disk. The idea is
that by saving these files to your hard disk, you will save time when you visit the same
web site in the future, because your computer will not need to download the same
information again.

When you are sending information over the Internet, we call that
uploading. When you are receiving information from the Internet,
we call that downloading.
 CHAPTER 4: Internet Cookies, Temporary Internet Files, and Pop-ups 61

Downloading versus Installing

Some people confuse the term downloading software with installing software.
Downloading describes a specific way in which someone can acquire the software
by receiving it from the Internet. If you purchase the software at a store, you
are not downloading it. Once you have the software, whether you downloaded
it or purchased it at a store, you then install it. This terminology can make a big
difference when your friend makes the statement, “I downloaded Windows on
my computer.”
Microsoft never made Windows available to download, so if your friend
really did download Windows, he did it illegally. This is referred to as pirating,
a word describing software theft. Perhaps what your friend really meant to say
was that he installed Windows on his computer. See how using the proper
terminology can make a difference?

This raises many privacy concerns for some people, because it effectively
leaves a record of the web sites you have visited. Depending on how large the
temporary Internet file area is on your hard disk, someone could theoretically look
back through months, or even years, of your Internet history. By default, Internet
Explorer sets aside three percent of your total hard disk space for temporary
Internet files. For example, if you have an 80-gigabyte (GB) hard disk, Internet
Explorer will reserve 2.4GB of it solely for your temporary Internet files. That is
a lot of history and hard disk space.

Are Temporary Internet Files Good or Bad?

Temporary Internet files are good, if you visit a web site regularly. Storing the
entire contents of the web page on your hard disk can give you the impression that
the page is loading faster on future visits because it simply grabs the information
locally from your hard disk rather than globally over the Internet.
Temporary Internet files are bad, if you don’t want to give other people who
have access to a computer you are using the ability to discover where you have
been. Perhaps you’re afraid that if your boss discovers pictures, sounds, text,
and/or movie clips from www.espn.com on your work computer, you could be
reprimanded, or worse, lose your job. Most employers today record and review
their employee’s computer usage for simple liability reasons. However, there is
rarely a need to purchase any software to methodically erase your Internet history.
The only exception would be if you have a computer genius for a relative that has
62 The Healthy PC

access to your computer and you have an Internet history that you’d rather
they not know about, or if you have engaged in any illegal activity over the
Internet and you’re afraid the law will use that as evidence against you should
you ever get accused of such a crime. This is contrary to what many popular
Internet advertisements for such software declare with such urgency and extreme
exaggeration, such as the popular Internet advertisement shown in Figure 4-3.
Internet Explorer allows you to control how often it compares the
information it has already stored with information the web page currently
contains. You can instruct Internet Explorer to check for these changes in
several ways:

■ Every time you visit a web page

■ Any time you start Internet Explorer
■ Decide automatically when the files need to be updated
■ Never check for changes and always load the stored (also referred
to as cached) files from the temporary Internet files section of your
hard disk

You can also instruct Internet Explorer to delete all temporary Internet files
and even specify a maximum amount of hard disk space that those files can
never exceed.

FIGURE 4-3 Typical Internet advertisement encouraging needless paranoia

 CHAPTER 4: Internet Cookies, Temporary Internet Files, and Pop-ups 63

Taking Control of Your Temporary Internet Files

To optimize your temporary Internet file storage settings, follow these steps:

1. For Windows 98/Me, click Start, click Settings, and click Control Panel.
For Windows XP, click Start and click Control Panel.
2. Double-click the icon labeled Internet Options.

3. The General page opens. Click the Delete Files… button, which is in the
middle of the page, under Temporary Internet files (see Figure 4-2).
4. Place a check in the box next to Delete all offline content and click OK.
(This process may take a few minutes, depending on how large your
temporary Internet file area is and the speed of your computer.)
5. Click the Settings button.

6. In the Settings dialog box, ensure the option Automatically is selected and
set the maximum amount of disk space to be used to 30MB. Your screen
should now look like Figure 4-4.
7. Click OK, and then close the Control Panel.

FIGURE 4-4 Temporary Internet files settings

64 The Healthy PC

Internet Pop-ups
An Internet pop-up is typically an advertisement that appears in a new browser
window on your screen. It can be quite annoying when these smaller, advertising-
based windows cover portions of a legitimate window you are attempting to view.
In many cases, when you attempt to close one or more of these Internet
pop-up windows, they can trigger other pop-up windows to appear, causing
extreme frustration. This is all thanks to JavaScript, a computer programming
language invented to enhance Internet web pages.

JavaScript code is placed inside a normal web page. When people view
that web page, their browser’s (Internet Explorer and Netscape are
examples of browsers) built-in interpreter reads the JavaScript and runs
it. JavaScript can be used for accomplishing many different tasks. One
popular way JavaScript is used is to gather information from users in
online forms. In this case, JavaScript can help validate entries. For
example, a programmer might want to validate a person’s age entry
falls between 10 and 100.

Recently, new forms of advertising using a pop-up-like mentality started to

surface across the Internet. There are now pop-unders, which work like pop-ups,
except they hide behind your main window, waiting until you close it to bombard
you with their advertisements.

Popping the Pop-ups!

You can prevent pop-ups and pop-unders from ever opening and, once again, you
don’t need to spend a penny on ad-blocker software to do it! Since the pop-ups
and pop-unders require JavaScript to run, you simply need to turn off JavaScript.
Unfortunately, this results in problems with many web pages that rely on
JavaScript. Fortunately, Internet Explorer has a wonderful system of Internet security
settings that can allow you to group pages into categories and apply different settings
to those categories. We will show you, first, how to disable JavaScript. Then you’ll
learn how to instruct the computer to allow JavaScript only for web sites that you
specify.

Disabling JavaScript
1. For Windows 98/Me, click Start, click Settings, and click Control Panel.
For Windows XP, click Start and click Control Panel.
2. Double-click the Internet Options icon.
 CHAPTER 4: Internet Cookies, Temporary Internet Files, and Pop-ups 65

3. Click the tab labeled Security.

4. Ensure Internet is selected at the top of window as shown in Figure 4-5,

and then click the button labeled Custom Level…
5. Choose every DISABLE option in the window that opens as shown in
Figure 4-6, and then click OK and click OK once more. Now you have
just disabled every possible means that a web site has to force a pop-up
or pop-under advertisement on your PC.
6. To test this, visit a web site that you know has pop-up advertising. For
example, if you take a moment right now to visit www.tripod.com, you’ll
see no pop-up or pop-under window appears.

Eventually, you will discover that some pages you want to use, such as
www.hotmail.com or www.windowsupdate.com, will no longer function properly.
If this happens, simply add those web sites to your Trusted Sites list.

FIGURE 4-5 Internet Security options dialog window

66 The Healthy PC

FIGURE 4-6 Disable all options in the Security Settings window

Adding Web Sites to the Trusted Sites List

1. For Windows 98/Me, click Start, click Settings, and click Control Panel.
For Windows XP, click Start and click Control Panel.
2. Double-click the Internet Options icon.

3. Click the tab labeled Security.

4. Ensure Trusted Sites is selected at the top of window, as shown in Figure 4-7,
and then click the button labeled Sites…
5. Uncheck the box that says Require server verification (https:) for all
sites in this zone, as shown in Figure 4-8.
6. To instruct the computer which web sites are safe, simply enter them in the
space provided next to Add this Web site to the zone:
 CHAPTER 4: Internet Cookies, Temporary Internet Files, and Pop-ups 67

FIGURE 4-7 Selecting Trusted Sites in the Internet Security options dialog window

FIGURE 4-8 Using the Trusted Sites window to add or remove web sites that you wish
to allow JavaScript functionality
68 The Healthy PC

7. When entering a trusted web site, leave out the information that appears
before the first period. For example, if you wanted to add www.hotmail.com
to your trusted sites list, simply type hotmail.com in the space provided and
click the button labeled Add. To add www.windowsupdate.com, you would
enter windowsupdate.com and click Add.
8. If you want to test this, add tripod.com to your trusted sites list and then
click OK.
9. Next, visit www.tripod.com and a pop-up should appear. If so, you’ve done
everything correctly!

Additionally, some sites like www.hotmail.com actually reroute you all over
the place in the process of verifying your user name and password. So, to use your
Hotmail account, you will also need to add passport.com to your list of trusted
sites. To use windowsupdate.com, you will also need to include microsoft.com to
your list of Trusted Sites.
This may be a little confusing at first, but it virtually eliminates all pop-up and
pop-under advertisements. Occasionally, you will realize that a link is not taking
you somewhere or a web site does not load completely or loads with an error message.
If this happens, simply add the site to your Trusted Sites list and try accessing it again.

Removing Web Sites from the Trusted Sites list

To remove any web site that you have entered by mistake or have simply changed
your mind about, simply go back to the Security settings as described in Steps 1-5
above. After you have clicked the Sites… button, a window will appear with a list
of all of your trusted sites. Internet Explorer will automatically put a “*” in front
of all of the web site names you have entered, as in *.tripod.com. The asterisk (*),
also referred to as a wildcard, tells the computer that any URL ending in hotmail.com
will be trusted.
Click once on any site in the list that you no longer wish to trust and then click the
Remove button. Continue this process, one at a time, for each site you want to remove.
If you added tripod.com to your trusted sites list, as recommended in the previous
steps, go ahead and remove it from the Trusted Sites list now. When you are finished,
click OK and then click OK once more. Next, visit www.tripod.com and no pop-up
or pop-under windows should appear.
As if pop-up and pop-under appearances weren’t frustrating enough, they can
also cause a slowdown in your Internet responsiveness. This is because they use
the Internet bandwidth you’re paying for to download their text, graphics, and even
movies onto your computer, all in an effort to advertise their products! Not only
that, but very aggressive pop-up and pop-under window attacks can consume all of
 CHAPTER 4: Internet Cookies, Temporary Internet Files, and Pop-ups 69

your available resources, causing your computer to crash, resulting in possible lost
productivity, data, and time.

For Windows XP Users: Getting

Rid of Messenger Pop-Ups
Another twist is the Windows Messenger pop-up advertisement, which started
to appear in November 2002. This type of pop-up exploits a tool included with
Windows XP intended to allow system administrators (computer gurus at work)
to easily send messages to users (employees using the work computers) on their
network. Windows Messenger pop-up advertisements are easily discernible from
other types of pop-ups because they always show Messenger Service at the very
top of the window, such as in the example shown in Figure 4-9.
If you like to play games on your computer, there is nothing worse than being
kicked out of a game and back onto your Windows desktop because of a Windows
Messenger alert!

FIGURE 4-9 An example of a Windows Messenger pop-up advertisement

70 The Healthy PC

So, is there anything you can do? Yes, and like many of the other solutions
offered in this book, it won’t cost you a cent! There is no need to purchase any
software to block Windows Messenger pop-ups. (If you are running Windows 98
or Me, you are not affected by this and can safely skip these steps.)

Many Microsoft products share a common name, such as Windows 2000,

Office 2000, and Windows Millennium. Just as Windows Explorer, used for
navigating the contents of your disk, shouldn’t be confused with Internet
Explorer, Windows Messenger shouldn’t be confused with MSN Messenger.

To disable Windows Messenger on a Windows XP computer, follow these steps:

1. Click Start, click Control Panel, and double-click Administrative Tools.

2. Double-click Services, as shown in Figure 4-10.

3. Scroll down and double-click Messenger (the list should be in alphabetical

order), as shown in Figure 4-11.
4. In the Messenger Properties dialog box, click the Stop button.

5. Select Disabled from the Startup type drop-down list, as shown in

Figure 4-12.

FIGURE 4-10 Windows XP Administrative Tools window

 CHAPTER 4: Internet Cookies, Temporary Internet Files, and Pop-ups 71

FIGURE 4-11 Windows XP Services window

6. Click OK.

You are now blocking Windows Messenger pop-up advertisements forever!

FIGURE 4-12 Windows XP Messenger Properties dialog box

72 The Healthy PC

Summary
In this chapter, you’ve taken the bytes out of cookies and Java, yet you haven’t even
had a thing to eat or drink! You’ve taken control of your Internet experience and
put a stop to those intrusive and pesky advertisers. You’ve learned how to erase
your Internet history and even limit the amount of Internet history your computer
will store. Ultimately, you’ve learned you don’t need to throw money at a problem in
order to solve it; all you really need to know is what keys to press and in what order.
At this point in the book, don’t be surprised if you should suddenly feel a strong
desire to watch Star Trek, as your understanding of becoming a complete nerd
blossoms. Give in to it; resistance is futile. (If you didn’t get that last line, you’re
not a true geek yet, but I guarantee you are closer now than you’ve ever been!)
I hope you’re still hungry, because in the next chapter, we’re about to dish out the
spam. You’re going to learn how to not only prevent unwanted e-mail advertisements,
but also how to identify hoax e-mail messages before passing them onto others.
 Chapter 5
All About Email:
Spam and Hoaxes
74 The Healthy PC

W hen the Internet was new, not many people were using it, and many businesses
never considered the idea of using the Internet as a means to market their
products. But as more and more people got connected to the Internet, businesses
began to realize the enormous potential it held as a marketing and selling tool. The
trend started with advertising in online forums, then web pages, and eventually led
up to pummeling your email inbox with messages about anything anyone could
possibly sell.

To make matters worse, some people find it amusing to spread false information
in email messages disguised as calls for help, public safety warnings, or easy ways
to make money. There are also email chain letters. And, as you’ve already learned,
many virus creators like to use email as a means to transport their viruses from one
machine to another.
In this chapter, you’ll learn how to spot email hoaxes and not become a victim
of someone’s practical joke. You’ll also learn how to teach your computer to sort
your email for you, separating the legitimate email you want to read from the junk
email you never asked for.

Email Hoaxes
Email hoaxes are a modern version of urban legend, or folklore, stories. When I
was growing up as a child, we were told to be careful of any apples we received
while trick-or-treating during Halloween. Apparently, as the story goes, some
people were putting razor blades in apples, making them hazardous to eat. The
New York Times (10/28/70, page 56) and even the “Dear Abby” column mentioned
this potential threat to concerned parents. Years later, researchers Joel Best and
Gerald Horiuchi studied national crime data from 1958 to 1985. They did not find
a single reported incident of a razor appearing in an apple, or any other fruit or
candy for that matter. The children who were harmed by tainted candy, as reported
during those years, were harmed by members of their own family.
I mention this story because the Internet has created a new and fast way for the
distribution of information. Some of this information is really nothing more than
misinformation written by pranksters who get a kick from seeing how gullible people
can be. Although hoaxes aren’t as directly harmful as viruses or Trojans, they can
be time-consuming and costly. Email hoaxes not only consume Internet bandwidth,
but they are also responsible for the combined lost productivity of those who take
the time to read the message and then perpetuate the hoax by forwarding it to others,
who in turn, repeat this cycle.
 CHAPTER 5: All About Email: Spam and Hoaxes 75

A very popular Internet email hoax that still circulates encourages people to
delete a file called JDBGMGR.EXE from their computers. The email warns that
no antivirus software can detect this nasty virus, and you must manually delete this
file if it exists on your hard disk. The email is even so kind as to walk you through
the necessary steps to locate and remove this file. It encourages you to forward the
message to others, so that they can remove this “virus” as well.
The problem is that the file JDBGMGR.EXE is a legitimate Windows file
(although one you will probably never miss). For some reason, Microsoft associated
a little cartoon bear icon with the file. If you followed the hoax email message
instructions (which reference that cute bear icon) and delete this file, it is not necessary
to recover it unless you develop Java programs using Microsoft’s Visual J++ 1.1.
If you receive this email message, delete it, and do not forward it to others.
Although the file mentioned may have the possibility of being infected with a virus,
its presence is not an indication of a virus infection.

How Can I Tell a Hoax from a Legitimate Message?

Hoax email messages generally contain a subject that grabs your attention such as
“Free Money” or “IMPORTANT: PLEASE READ!!!” or “Virus Alert.” Within the
message is usually a threat of some sort of repercussion if you do not take appropriate
action. It may say files are going to be deleted, you will lose money, or you will
have bad luck. Some even go so far as to mention a reward of cash or a cute animation
on your screen as payment for your participation.
Finally, the hoax will contain a request. There can be any number of possible
requests, but the one that gives it away as a hoax is the insistence that you pass
the message along, or forward, it to others. A perfect example of this is shown in
Figure 5-1. Certainly, someone could send you a legitimate message asking you to
forward it to others, but most of time, these requests are just perpetuating hoaxes.
In general, a hoax tends to leave out specific information, and that’s what makes
it effective. If you say the world may end sometime soon, you’re more likely to be
believed than if you state the world will end at midnight, January 1, 2004.
Some people think it’s better to be safe than sorry (as implied in the message
shown in Figure 5-1) and use that justification to forward a hoax email message
to others. Using that same logic, would you yell “FIRE!” in a crowded theater,
simply because you felt a little warm?
If you aren’t sure if a message is a hoax, there are web sites you can check that
are dedicated to eradicating such hoaxes and increasing public awareness:

■ http://hoaxbusters.ciac.org
76 The Healthy PC

■ http://www.nonprofit.net/hoax
■ http://www.truthorfiction.com
■ http://www.vmyths.com
■ http://www.symantec.com/avcenter/hoax.html
■ http://www.stiller.com/hoaxa.htm
■ http://snopes.com
■ http://www.urbanlegends.com

FIGURE 5-1 An example of a common email hoax message

 CHAPTER 5: All About Email: Spam and Hoaxes 77

These are just some of the hundreds of web sites dedicated to dispelling email
hoaxes. Use any of these web sites to help determine if an email message you
received is a hoax before irresponsibly passing it along to others.

What Else Should I Know About Email Hoaxes?

In general, you should know that there is no such thing as an email-tracking
program and no company will pay you for forwarding messages. No virus can
cause hardware damage. Although viruses can potentially cause the loss or corruption
of data on your computer, they can never cause any permanent hardware failure.
No animations will appear on your screen, and you will never receive anything in
return for forwarding an email. Since there is no way for an outside source to track
your email, no one can know that you sent it except for the people who received it
from you.
Be aware that there is no bill in Congress to place a tax on email, there was
never a Neiman-Marcus cookie recipe, and there have never been tainted needles
found on gas station pumps or in children’s play areas. There is no virus you need
to manually delete from your computer because antivirus software cannot detect it
(as long as you keep your antivirus software up to date!).
Hotmail, Yahoo, ICQ, and other services will never demand that you send
messages to verify that your account is active. Simply logging on to those services
allows them to determine whether or not your account is active. Credit card companies
will never ask you for any personal information via email. Microsoft will never
send you an email with an attachment. If you receive an email from Microsoft
that supposedly contains an update or screensaver, delete it immediately.
Finally, there is no poison perfume, your email address is NOT expiring, nor is
there such a thing as a virus-infected message with the subject “WTC Survivor.”

Spam
Spam is geek terminology for unsolicited junk email and messages. Spam is fast
becoming a huge problem. It’s starting to cost corporations millions of dollars each
year to filter out spam, and handling spam has required companies to increase their
server storage space and Internet bandwidth for all the extra traffic it generates.

Why Do I Receive So Many Spam Messages?

Once you give out your email address to a company, it may be sold to other companies.
Those other companies quite often sell your email address to other companies, and
78 The Healthy PC

Why Is It Called Spam?

Spam is actually a canned meat product made by Hormel, which is widely
available in the United States and other countries (see www.spam.com for
details).
The term spam originated from an old British comedy troupe called Monty
Python. (Generally speaking, computer nerds love Monty Python.) One of their
more famous sketches included a husband and wife who visit a restaurant in
which everything on the menu contains Spam as an ingredient. As the waitress
is explaining all the Spam-enhanced meals to the husband and wife, a group of
men dressed as Vikings start singing about Spam. The wife says she doesn’t
like Spam, and she attempts to ask the waitress if the restaurant has anything
available that does not contain Spam. Unfortunately, the Vikings start singing
louder and louder, drowning out everyone around them with their loud voices.
(This may not sound funny to you unless you understand British humor.)
The first encounters of spam messages were in online discussion forums,
known as newsgroups. As large amounts of unwanted advertisements (in many
cases, the same advertisements repeated over and over) interrupted the normal
flow of conversation, it made further discussion difficult or even impossible.
Many people who were affected by this remembered the Monty Python skit
about Spam, where the characters sing Spam so often and so loudly that other
people in the restaurant cannot carry on a conversation. Thus, everyone started
referring to these junk messages as “spam.”
Initially, some people wanted to give junk email an official name, such as UCE
(unsolicited commercial email) or UBE (unsolicited bulk email). But the term spam
stuck, perhaps because it’s easier to remember or because so many computer nerds
are fans of Monty Python and understood the reference. I doubt that the Hormel
folks are happy with the term, but there’s not much they can do about it.

so on into infinity. The following are some of the most common ways people
unwittingly offer their email addresses to companies:

■ Filling out online registration forms

■ Entering contests
■ Engaging in online discussion groups
■ Filling out online surveys
■ Choosing a common name for your email address
 CHAPTER 5: All About Email: Spam and Hoaxes 79

■ If you belong to America Online (AOL), having a member profile and/or

participating in chat rooms

Also, some companies use a method called a dictionary attack. They compile
many common names to form a list, or dictionary of names, and then mix names
from this list with a list of arbitrary domain names in the reasonable expectation
that some of the resulting combinations will be valid.

To put it simply, a domain name is the information that follows the @

symbol in any email address. Examples of domain names are aol.com
and hotmail.com.

Is There Anything I Can Do About Spam?

Once you start receiving spam, it is practically impossible to put a stop to it without
changing your email address. Some Internet service providers (ISPs) have started
to filter spam messages before they reach you; however, automating a process to
decipher an unwanted advertisement from a wanted advertisement is practically
impossible. Some advertising messages are legitimate, and you may have even
requested that they be sent to you. For example, you may ask a retailer to send
you an email concerning any upcoming specials or sales. Your ISP cannot determine
if the message sent had your prior approval. As a result, many spam messages are
not intercepted by your ISP.

The process of automating the detection and removal of spam from

legitimate email is referred to as filtering.

Some spam messages offer you the option to be taken off of their email list. In
most cases, when you respond to these messages, your request doesn’t go through,
because the address they are directing you to is fake. Other times, when your request
does go through, they use it as verification that you received their email advertisement.
Now they know you are receiving and reading their messages, which makes your
email address even more valuable to them (as well as to other companies that they
may sell it to). Only if the email comes from a large, reputable company or if you
previously requested to be sent email advertisements should you ever request to be
removed from a mailing list.
You can enable filtering for all of your email by setting rules and restrictions
in your email software. With the filters configured to your preferences, your email
software can automatically decide which email messages you want to receive and
which messages you want to ignore. This process varies depending on the software
80 The Healthy PC

you use to check your email. Here, I’ll explain how to filter email messages with
some of the most popular software: AOL, Microsoft Outlook, Microsoft Outlook
Express, NetZero, Hotmail, and Yahoo.

Enabling Filters Using AOL 8.0 Plus

AOL has a feature called Mail Controls. You can use this feature to filter email,
as follows:

1. Access the Mail Controls by logging in to AOL with your master screen
name (the first screen name you created when you joined AOL, if you have
more than one) and go to your email inbox in AOL.
2. Click Mail Options (located at the top of the screen) and select Block
Unwanted Mail.
3. You will see that AOL offers three options: Allow all email to be delivered
to this Screen Name, Block all email from being delivered to this Screen
Name, and Customize Mail Controls for this Screen Name. Select Customize
and click Next.
4. In the screen that appears, shown in Figure 5-2, you can choose to block
email from entire Internet domain names or specify individual email
addresses. You can also choose to block email containing files or pictures.
If you constantly receive pornographic advertisements, choosing to block
pictures will prevent those images from being displayed. Blocking files
prevents the possibility of having your computer infected by a virus.
However, enabling this option means legitimate files and pictures will
be inaccessible to you. Once you have finished making your selections,
click Summary, and then click Save.

For additional information, click the Mail Controls Help button at the top of
the Mail Controls screen. You can also call AOL technical support to get answers
to any questions you may have concerning this feature.

AOL is a proprietary system. There is no alternative method to check

your email other than using the software provided by AOL or by visiting
www.aol.com. As of the writing of this book, it is not, and has never been,
possible to configure any dedicated email program (such as Microsoft
Outlook Express or Microsoft Outlook) to work with AOL.
 CHAPTER 5: All About Email: Spam and Hoaxes 81

FIGURE 5-2 Using AOL 8.0 Plus Mail Controls to filter email

Enabling Filters Using Microsoft Outlook or Outlook Express

Microsoft likes to refer to its mail filters as rules. You can configure the email
rules in a number of different ways.
Microsoft Outlook is a feature-rich version of Outlook Express that is included
with Microsoft Office. Microsoft Outlook Express is included free with all versions
of Windows. Both products can sort or filter your email based on the sender, the
subject, a specific word anywhere in the message, or numerous other possibilities.
Since all Windows users have Outlook Express and because Outlook operates
in a very similar fashion, the following example uses Outlook Express.
If you want to send all email messages that contain the word Viagra in the
subject of the message to the Deleted Items folder, follow these easy steps:

1. Open Outlook Express.

82 The Healthy PC

2. Click Tools, click Message Rules, then click Mail.

3. Place a check in the box next to Where the Subject line contains
specific words.
4. Place a check in the box next to Move it to the specified folder.

5. In the rule description, you will see underlined words. Clicking on these
words allows you to enter the specific information about this new rule.
As shown in Figure 5-3, click once on contains specific words. In the
dialog box that opens, type in Viagra and click the Add button, as shown
in Figure 5-4. You can continue to add other words at this time if you
choose. At this point, you are telling Outlook Express to apply this rule
to any message that contains any one of the words you enter if found in
the subject of the message. When you are finished, click OK.
6. Next, click on specified and click the + symbol next to Folders to display
all of your Outlook Express email folders. Select the Deleted Items folder
and click OK (see Figure 5-5).
7. Finally, the last step is to give the rule a name. We’ll call this one Delete
Unwanted Mail. Just type that in, or any other name that you wish, and
then click OK.

The window that appears will show you all of your rules, and by selecting any
rule, the description window will show underlined words that will allow you to add
or remove or modify the rules settings at any point in the future. Click OK to complete
this task.
 CHAPTER 5: All About Email: Spam and Hoaxes 83

FIGURE 5-3 Finding the mail rules in Outlook Express version 6

From now on, as new mail arrives, the filter will check the subject of all incoming
email and send any messages containing the word Viagra immediately to your
Deleted Items folder.

FIGURE 5-4 Enter words you want Outlook Express to watch for.
84 The Healthy PC

FIGURE 5-5 Instruct Outlook Express where to put the messages that contain any one
of the words you entered from the previous step.

This process won’t solve your spam problems entirely, however. That’s because
many spammers will misspell words on purpose. For the same reason, it’s probably
a waste of your time to create a filter to automatically send unwanted email messages
from specific senders to the Deleted Items folder because most spammers never use
the same “from” address more than once.
You may have noticed that the option to Delete Item was available in the rules
options. Selecting that box accomplishes the same goal; however, I chose to walk
you through this process in a manner that will make you familiar with how the
rules work. You can create new folders and call them anything you wish and send
specific messages from specific people or groups of people into those specific
folders, effectively allowing Outlook or Outlook Express to sort your email for
you automatically and not just spam.
For a more detailed tutorial on using the filter options in Outlook Express, start
Outlook Express and press the F1 key on your keyboard. Type in the word rules.
Click any of the related topics to learn how to configure email rules.
There is a free utility that integrates with the rules settings of Outlook and
Outlook Express and automates the spam removal process. This software is called
POPFile and was created by John Graham-Cumming. (John is a programmer who
has the desire to help others and finances his work through donations.) You can
download this software, as well as find detailed instructions on how to install and
configure it, at http://popfile.sourceforge.net.
 CHAPTER 5: All About Email: Spam and Hoaxes 85

In simple terms, the POPFile software maintains a memory of words

commonly found in classes (known as “buckets”) you have set up (one bucket
might be called SPAM while another might be called REGULAR) and judges
incoming email messages based on the probabilities of that email containing
specific words belonging to each class. It then marks the email as a member
of whichever class comes out with the highest probability and associates it with
the appropriate bucket.
A great web site that further explains the setup and use of POPFile (should you
require more assistance) can be found at http://www.tames.net/security/popfile.htm.

Enabling Filters Using NetZero

The free version of NetZero does not have any email filter options. However, you
can configure Microsoft Outlook Express or Microsoft Outlook to check your NetZero
email. Then you can use the filtering techniques described in the previous section
for Microsoft Outlook or Microsoft Outlook Express.
To learn how to configure Microsoft Outlook or Outlook Express to check your
NetZero email, visit www.netzero.net/support/email/email-setup.html.

Enabling Filters Using Hotmail

To enable filters using Hotmail, after you’ve signed in to Hotmail, click Options
at the top of the screen. Under the heading Mail Handling, there are several self-
explanatory options for controlling how your email is handled.
Alternatively, you can configure Hotmail to work with Microsoft Outlook Express
and use the filter options available in Outlook Express.
Because Hotmail does not use something called a POP3 server, the free POPFile
software, which automates the spam-removal process for Outlook and Outlook
Express, will not work with Hotmail.

POP is short for Post Office Protocol and is the standard method most
Internet Service Providers (ISPs) use to allow you to retrieve your email
from their servers. Services such as AOL are considered “closed systems”
because you must use their proprietary software to read your email. POP3
allows you to download your mail on to your computer using a program
that supports POP3, such as Outlook or Outlook Express. If you open
Internet Explorer to read your email, this is referred to as web-based
email. Most free email services such as Yahoo require that you use Internet
Explorer to check your email. There are pros and cons to each of these
methods; however, the only method that allows you to save your email
on your computer automatically is POP3.
86 The Healthy PC

Enabling Filters Using Yahoo

If you use Yahoo to check your email, you can filter email by following these steps:

1. Sign in to your Yahoo email account and click Mail Options. This appears
in two places on your screen: on the upper-right side and also on the
lower-right side. Clicking either one will work equally well.
2. In the center of the screen, under the heading Management, click the
Filters link. Here, you can customize how you would like Yahoo to handle
and direct your email.

I recommend reading the section titled Avoiding Spam, located under the Help
link in the upper-right corner of the screen.

Summary
In this chapter, you’ve learned how to tell an email hoax from a legitimate message.
You’ve also learned why spam is so prevalent on the Internet, why it’s called spam,
and how to prevent most of it from appearing in your email inbox. You’re doing great!
In the next chapter, you’ll learn what a firewall is and why you’ll probably want
one (if you’re not using one already).
Chapter 6
Firewalls
88 The Healthy PC

A n unprotected computer with a high-speed Internet connection is not only

irresponsible and inconsiderate to other Internet users, but it can also be the
cause of frustration to the owner of the infected computer because of its reduced
performance and reliability. In this chapter, you’ll learn all about firewalls and how
you can ensure that your computer is not being controlled by outside forces to do
bad things to other people’s computers on the Internet without your knowledge
or consent.

When you’re on the Internet, it’s possible for people to “break in” to your
computer and view, alter, steal, or even delete files from your computer without
your knowledge. In fact, many people who have unprotected high-speed Internet
connections are unknowingly responsible for the spread of viruses, distributed
denial of service (DDoS) attacks and even sending out spam. Having your computer
on a high-speed Internet connection without proper protection is no different than
voluntarily handing your computer over to a stranger.

What Is a DDoS Attack?

A distributed denial of service (DDoS) attack occurs when someone commandeers
several hundred, or even thousand, computers and instructs them to access a
particular web site at the same time. This typically happens with PCs that are
infected with a kind of virus that opens a backdoor to your computer. A backdoor
is computer language for a secret entrance. Any computer can have a virus or
Trojan that installs this backdoor, giving full access to anyone who knows how
to look for it. The web site cannot respond to all of the simultaneous requests
and, as a result, a “page not found” error will occur. When this is done for
hours or days at a time, it can prevent legitimate visitors from accessing that
web page.
What if I could remotely control the telephones of a hundred people, and
I instructed those telephones to dial your telephone number over and over for
hours on end? When your telephone rings, how do you determine if there is
a legitimate caller on the other end of the line without answering it? In the
meantime, everyone else that is trying to call you during this time, legitimate
or not, will get a busy signal. The best you can do is answer the phone as
quickly and as often as you can, and hope the people who call and get a busy
signal will try again. Now, imagine this happening to a business telephone
number for an incoming sales line. Then you can begin to understand the
serious implications a DDoS attack can have on a web site.
 CHAPTER 6: Firewalls 89

What Is a Firewall?
Think of a firewall as you would an alarm for your house. Think of antivirus
software as you would pesticide for your home. Now, the alarm system won’t keep
out the bugs, and the pesticide won’t keep out the burglars. That is why it’s important
that your computer has both a firewall and antivirus software running at all times!

The dictionary defines a firewall as a barrier to prevent the spread of fire.

In computer terms, a firewall can be any of a number of security schemes
that prevent unauthorized users from gaining access to a computer network.
A firewall is also commonly used to monitor the transfer of data in and out
of a network.

Aren’t Firewalls Complicated and Expensive?

Most firewalls designed for home users are incredibly easy to use. A firewall can be
hardware or software. Some firewall software may contain numerous other features
as well. For example, Symantec’s Norton Internet Security (www.symantec.com)
has the following key features:

■ Parental Control Used to block unsuitable web sites so that you can rest
easy when your children are surfing the Internet.
■ AntiVirus Yes, firewall and antivirus in the same software package!
What a concept!
■ Spam Alert Used to block unwanted email messages from reaching
your inbox.
■ Ad Blocking Used to help put a stop to banner ads, pop-ups, and
pop-under advertising windows.
■ Privacy Control Used to prevent information being sent from your
computer without your permission.
■ Connection Keep Alive Used to help prevent dial-up Internet sessions
from being disconnected due to periods of inactivity.
■ Web Cleanup Used to delete unneeded files left over from Internet sessions.
■ Cookie Control Used to accept or reject a cookie any time a web site
attempts to create one to your computer.
90 The Healthy PC

Other firewall software packages, like Zone Labs Zone Alarm (www.zonelabs
.com) or Tiny Software’s Tiny Personal Firewall (www.tinysoftware.com), offer
fantastic firewall protection. These vendors offer their basic, sometimes called
personal, firewall product to home users for free.

What About Hardware Firewalls?

An example of the most common type of a consumer-based hardware firewall
is included with the purchase of a consumer router. A consumer-based router
usually does the job of two, three, and sometimes even four devices. A consumer-
based router allows you to share most high-speed Internet connections among as
many as 253 computers (assuming you have that many ports available). For as
little as $50, a basic consumer router will have four ports (think of a port as a
socket that you can plug your computer into) that will allow up to four computers
to simultaneously and independently share your high-speed Internet connection
without needing to pay your ISP any additional fees, ever.

A distinction is made between a router intended for consumers and one

intended for businesses. The explanations offered here are for consumer-
based routers only. These routers are designed with numerous, easy-to-use
features intended for the home and small office user. Large corporations
have different requirements than consumers. The routers they use serve a
different purpose than what is explained here, cost a lot more money, and
require much more technical knowledge to configure.

A router is always connected to at least two networks, typically a local area

network (LAN) and a wide area network (WAN), with your home being the LAN
and the Internet being the WAN. The router intelligently decides how to direct data
from one computer to another based on its current understanding of the state of the
networks to which it’s connected. The router’s job is to recognize and differentiate
all of the computers on your network from other computers not on your network.
We refer to computers located in the same building as being a local area network
or LAN. When we need to go miles (whether it’s one or 20,000 miles) between two
or more computers that are communicating with each other, we call that a wide
area network or WAN.
In addition, a consumer router acts as a switch. A switch is a device that controls
and directs communication between two or more computers. Think of a switch as
a traffic cop. This is useful because it can allow the sharing of files and printers
between the computers if the user chooses to share those things. That means that
 CHAPTER 6: Firewalls 91

any computer can have access to any files and print to any printer attached to any
other computer on the network. (Any computers plugged into a switch would be
considered a network, or more specifically, a LAN.)

Generally speaking, you cannot share programs over a LAN or WAN, only
the data. For example, if you have a Microsoft Word document on one PC,
you can access it from another PC if those PCs are networked together
and each has its own copy of Microsoft Word.

A consumer-based router usually includes a firewall as well, to ensure that no

one on the Internet can access your files or print to your printers.
Some routers even come with a built-in print server. A print server is nothing
more than a standard printer socket (the same as the one on the back of your PC)
located on the router, designed for plugging in your printer. Then, any computer
that is connected to the router can print to that printer. You can always share a printer
on a network, but in order for others to be able to print to it, the computer that the
printer is physically attached to must be powered on. By plugging the printer directly
into the router, you make the printer available at all times to anyone on the LAN.

Wireless Routers
Routers are now available in wireless versions, such as the one shown in Figure 6-1.
Just like a cordless phone, this enables you to share your Internet connection, files,
and printers with other computers in your house (maybe even your neighbor’s
house, if you so choose) without needing to run or install any wires.
A wireless router will also act as a regular, wired router. If a wireless router
is available for a few dollars more, I would recommend purchasing it, even if you
have no immediate need for the wireless portion. This gives you more flexibility
in the future, in case your computing needs change. Just because you have a router
that has wireless capabilities doesn’t mean you need to use the wireless aspect of
the router. It will function exactly the same as a wired router, if that’s how you
choose to use it.
There are several different standards for wireless routers to communicate
with wireless network cards. The current standards are 802.11b, 802.11a, and
802.11g. The letters represent the frequency and bandwidth the router communicates
with. The 802.11b standard is the slowest, and it is also the cheapest. Even the slowest
wireless connection will usually be ten times faster than the average high-speed
Internet connection. Whichever wireless standard you choose, it’s recommended
that you purchase all your wireless products from the same company to make
installation and configuration as simple, reliable, and straightforward as possible.
92 The Healthy PC

FIGURE 6-1 The front and back of a wireless SMC router, model 7004AWBR
(picture courtesy of SMC)

How Difficult Is a Hardware Router to Set Up?

Most routers available today are Plug and Play. In much the same way that a
telephone answering machine is wired between your telephone and a wall socket,
a router is simply wired between your computer(s) and your cable/DSL/satellite
modem, as illustrated in Figure 6-2.
In most cases, the router will automatically configure itself once it is turned on.
This varies based on the router you purchase and your high-speed ISP’s requirements.
Most routers come with a quick-installation guide, separate from the detailed and
lengthy documentation, to get you up and running as quickly and painlessly as
possible. I recommend SMC, D-Link, Netgear, and Hawking networking products
(in that order). They are inexpensive, widely available, easy to install, and very
reliable.

I Was Told Windows XP Includes a Firewall!

Windows XP does, in fact, come with a firewall. However, it’s a very basic and
rigid firewall, with few options to configure it. It’s certainly better than nothing,
unless you have a home network. That is because enabling Windows XP’s firewall
may prevent other computers on your network from being able to communicate
with it or each other. However, if you have just one PC, and it has Windows XP,
I recommend enabling the built-in firewall.
To enable the Windows XP firewall, follow these steps:

1. Click Start, and then click Control Panel.

2. Double-click the Network Connections icon.

 CHAPTER 6: Firewalls 93

3. Right-click an icon and select Properties.

4. Click the Advanced tab.

5. Place a check in the box next to Protect my computer and network by

limiting or preventing access to this computer from the Internet, as
shown in Figure 6-3.
6. Click OK.

7. Repeat steps 3 through 6 for any other icons in the Network Connections
window.
8. Close any remaining open windows.

Internet

Cable/DSL/Satellite modem

Router

FIGURE 6-2 Typical installation of a router

94 The Healthy PC

FIGURE 6-3 Enabling the Windows XP built-in firewall

Once you have completed this process with all the icons listed in the Network
Connections window, all of the icons should have a small lock that appears in their
upper-right corner, as shown in Figure 6-4.

Never run two different firewall (or antivirus) programs at the same time.
If you decide to use an alternate firewall, be sure to disable the Windows
XP built-in firewall and uninstall any previously installed firewall software
before installing the replacement. It is okay, however, to have a single
hardware and a single software firewall working together.

How Can I Tell If My Computer Is Vulnerable?

If you don’t think you need a firewall, you’re not sure if you have one, or you
have installed a firewall and want to see if it is working correctly, there is help
available. A gentleman by the name of Steve Gibson has a web site representing
his company, Gibson Research Corporation. In it, he offers plenty of computer
 CHAPTER 6: Firewalls 95

FIGURE 6-4 Local Area Connection icon with the Windows XP firewall enabled

security information and several free utilities. One of these utilities is called
ShieldsUP!, which is specifically designed to check for Internet-based vulnerabilities
in your computer.
To test your computer with ShieldsUP!, visit www.grc.com and click the
ShieldsUP! link. Under the section titled “Hot Spots,” click the link for ShieldsUP!
Follow the onscreen instructions, and be sure to run the Test My Shields! and Probe
My Ports! tests.
For more firewall information and reviews of numerous software firewall
solutions, visit www.firewallguide.com.
96 The Healthy PC

Universal Plug and Play

Now that you know about Internet risks and why you need a firewall, you may be
wondering if there is anything else you should know. Yes, there is. Both Windows
Me and Windows XP include a “feature” called Universal Plug and Play (UPnP).
This feature was designed to allow electronic devices to communicate with one
another, without requiring a technician to configure everything. These items would
include your home stereo, refrigerator, washing machine, and any other device
using UPnP technology. Unfortunately, the only devices that currently support
UPnP are routers. Since most routers don’t need to be configured anyway, UPnP
is not particularly useful.
Many people confuse UPnP with regular Plug and Play (PnP). They are two
entirely different things. You can read more about UPnP at www.upnp.org.
In December 2001, the FBI’s National Infrastructure Protection Center (NIPC)
issued a public warning about the vulnerabilities that exist in the UPnP feature
included with Windows Me and Windows XP (to read this official government
warning, visit www.nipc.gov/warnings/advisories/2001/01-030-2.htm). Therefore,
you might want to disable UPnP on your computer.
One option is to use a free utility called UnPlug ’n Pray, available at www.grc.com,
that will disable the UPnP service with the click of one button. Alternatively, you
can disable this service through the Windows Add/Remove Programs utility.

Disabling UPnP in Windows Me

To disable UPnP in Windows Me, follow these steps:

1. Click Start, click Settings, and then click Control Panel.

2. Double-click Add/Remove Programs.

3. Click the Windows Setup tab.

4. Double-click Communications, as shown in Figure 6-5.

5. Uncheck Universal Plug and Play, as shown in Figure 6-6.

6. Click OK.
 CHAPTER 6: Firewalls 97

FIGURE 6-5 Selecting the Communications option in the Windows Setup tab in
Windows Me

Universal Plug
and Play

FIGURE 6-6 Disabling Universal Plug and Play in Windows Me

98 The Healthy PC

Disabling UPnP in Windows XP

To disable UPnP in Windows XP, follow these steps:

1. Click Start, and then click Control Panel.

2. Double-click Add/Remove Programs.

3. In the Add or Remove Programs window, shown in Figure 6-7, click the
Add/Remove Windows Components option on the left side of the window.
4. In the Windows Components window, scroll down to locate Networking
Services, as shown in Figure 6-8. Then click that item.
5. Click the Details button.

6. Locate and uncheck Universal Plug and Play, as shown in Figure 6-9.

7. Click OK, and then close any remaining windows.

Add/Remove Windows Components button

FIGURE 6-7 Choosing the Add/Remove Windows Components option in Windows XP
 CHAPTER 6: Firewalls 99

Networking Services

Details button
FIGURE 6-8 Selecting Networking Services in Windows XP

FIGURE 6-9 Disabling Universal Plug and Play in Windows XP

100 The Healthy PC

More on File and Printer Sharing

If you have only one computer, there is no need for you to have File and Printer
Sharing enabled on your computer. This service is only necessary if you have two
or more computers and want to share files or printers (or both) between them. Having
this service installed not only consumes needless resources, but it offers another
way for bad guys to attempt to break in to your computer. So, if you don’t need to
use File and Printer Sharing, you can safely remove this service from your computer.

Removing File and Printer Sharing

from Windows 98/Me
To remove File and Printer Sharing from Windows 98 or Windows Me, follow
these steps:

1. Click Start, click Settings, and then click Control Panel.

2. Double-click the icon labeled Network.

3. Look for File and printer sharing for Microsoft Networks at the bottom
of the list that appears. If this item is listed, click it, as shown in Figure 6-10.
Then click the Remove button and click OK. (If it isn’t listed, just click
Cancel and close any remaining windows.)
4. If you located and removed the service, you will be asked to restart your
computer for the changes to take effect. Click Yes.

You have now secured your computer even further from the badness that exists
on the Internet.

Removing Unnecessary Basic Services

from Windows XP
Along with File and Printer Sharing, Windows XP has another service that you’re
even less likely to need as a home user: QoS Packet Scheduler (QoS is short for
Quality of Service). This is a tool from Microsoft that enables companies to limit
the amount of bandwidth any individual on a network can consume at any given
time. Without it, one person using the Internet heavily could slow down everyone
else who is sharing the Internet. It’s similar to how the water pressure goes down
in your home when two or more people crank up the water faucet at the same time
(or flush the toilet when you’re in the shower). For this service to work, a QoS
server must be installed and configured. Since you’re a home user, you will not
 CHAPTER 6: Firewalls 101

FIGURE 6-10 Removing File and Printer Sharing from Windows 98/Me

have a QoS server, so you do not need this service running and consuming
precious resources.
To remove these services from Windows XP, use the following steps:

1. Click Start, and then click Control Panel.

2. Double-click the icon labeled Network Connections.

3. Right-click an icon that appears and select Properties.

4. If File and Printer Sharing for Microsoft Networks appears in the list,
click to select it, as shown in Figure 6-11. Then click the Uninstall button.
When you’re asked if you’re sure, click Yes.
5. If you see QoS Packet Scheduler in the list (as in Figure 6-11), click it, and
then click the Uninstall button. When you’re asked if you’re sure, click Yes.
6. Click the Close button.
102 The Healthy PC

FIGURE 6-11 Removing File and Printer Sharing and QoS Packet Scheduler from
Windows XP

7. Repeat steps 3 through 6 for any other icons in the Network Connections
window.
8. Close any remaining windows.

That’s all there is to it. You have now increased your computer’s security and
reduced the number of tasks your computer needs to juggle.

Summary
In this chapter, you’ve learned how to lock down your computer and make it more
secure, so that you’re not as vulnerable to Internet bad guys. You’ve learned why
having a firewall is so important and how to check to make sure you’re protected
any time you’re curious. See how easy this is? I knew you could do it!
In the next chapter, you’ll learn how to ensure your Windows operating system
is configured to run at peak performance. You might be surprised to find how much
power your computer has, once you give it permission and instruct it to use all the
resources and features that are available.
 Chapter 7
Basic Windows Performance Tips
104 The Healthy PC

T here are hidden settings within Windows that tell it how to interact with your
particular hardware. These settings, when adjusted properly, can boost your
system’s performance quite noticeably. Although some of these tweaks may have
only a marginal effect, together they can have quite an impact on the speed and
reliability with which your computer operates.

Settings you can easily control within Windows can have an adverse effect on
how good or bad your operating system runs. In this chapter, you’re going to learn
about DMA mode, Active Desktop, visual animations, fonts, and swap files. These
Windows features can help or hinder you and in these next few pages, you’ll learn
how to properly configure them.

DMA Mode
During a typical installation of Windows 98/Me (and sometimes Windows XP), one
of its operating system settings is not enabled by default for reliability reasons. Unless
your computer was built before 1995, there is no reason that this setting should
remain disabled. The setting I am referring to here is called direct memory access
(DMA) mode. This setting can have a great impact on your computer performance
because it relates to reading and writing data to and from your hard disk.
Rather than enabling DMA mode, the Windows installation program may place
your hard disk and/or CD drive(s) in a basic mode called programmed input/output
(PIO). A typical computer requires 40 percent of the central processing unit (CPU)
to transfer data to a hard disk or CD drive in PIO mode, yet requires only 25 percent
of the CPU in DMA mode on the same hardware. Simply by changing this setting,
you can reduce the amount of work your computer must do by 15 percent!
DMA mode is sometimes referred to as bus mastering, which just means that
the disk controller has permission to talk directly to the computer’s memory without
first going through the CPU. This takes quite a load off of the CPU, which results
in better system performance. The terms direct memory access, or DMA, and bus
mastering mean the same thing.
You will need to adjust this setting individually for each device you have in
your computer. You probably have at least one hard disk and one CD drive. Not
all CD drives are compatible with DMA mode, however; most CD-R and CD-RW
drives (the drives used to create CDs, sometimes also referred to as CD burners)
not only support DMA, but will work better, faster, and more reliably with DMA
enabled. Enabling DMA mode for your CD drive is the only way to find out if it
helps or hinders you.
All of the devices (there won’t be more than four on typical home-based PCs)
should be compatible with DMA mode. If any one device does not work properly
 CHAPTER 7: Basic Windows Performance Tips 105

after DMA mode is enabled, you simply need to disable DMA mode for that one
device only. Leave DMA mode enabled on the rest of the devices.

If you have any negative effects after restarting your computer once you’ve
enabled DMA mode, you can start the computer in Safe Mode and follow
these same steps to disable DMA mode. Activating Safe Mode is explained
in detail in Chapter 12.

Enabling DMA Mode in Windows 98/Me

To enable DMA mode for your hard disk in Windows 98/Me, follow these steps:

1. Click Start, click Settings, and then click Control Panel.

2. Double-click the System icon.

3. Click the tab labeled Device Manager.

4. Ensure that the View devices by type option at the top of the dialog box is
selected, as shown in Figure 7-1.

FIGURE 7-1 Device Manager in Windows Me

106 The Healthy PC

5. Click the + symbol next to Disk drives.

6. Double-click GENERIC IDE DISK TYPE47 (see Figure 7-1). If more

than one hard disk drive is listed, select the first one and complete these
steps. Then repeat these steps for the second one.
7. Click the Settings tab.

8. If there is not already a check in the box next to DMA, as shown in

Figure 7-2, click to place one there. If there is already a check in the
box next to DMA, select Cancel and bypass the rest of these steps.
9. After you place a check next to DMA, you will see a warning message
similar to the one shown in Figure 7-3 for Windows Me or Figure 7-4 for
Windows 98. Because Windows does not know if your hardware supports
DMA mode, it automatically assumes it doesn’t. Most computers built
since 1995 do support DMA mode. Click OK to close the dialog box.

FIGURE 7-2 Checking the DMA setting in Windows Me

 CHAPTER 7: Basic Windows Performance Tips 107

FIGURE 7-3 Windows Me warning about DMA mode support

10. Click the OK button.

11. In Windows Me systems, click the Close button.

12. You will see a message informing you that you must restart your computer
for the change to take effect and asking if you want to restart Windows
now. Click Yes.

To enable DMA mode for your CD-ROM drive in Windows 98/Me, you follow
essentially the same procedure, but choose that drive in Device Manager, as follows:

1. Click Start, click Settings, and then click Control Panel.

2. Double-click the System icon.

3. Click the tab labeled Device Manager.

4. Ensure View devices by type is selected (see Figure 7-1).

5. Click the + symbol next to CDROM.

6. Double-click any items that appear. If more than one item is listed, select the
first one and complete these steps. Then repeat these steps for the second item.

FIGURE 7-4 Windows 98 warning about DMA mode support

108 The Healthy PC

7. Click the Settings tab.

8. If there is not already a check in the box next to DMA, place one there.
If there is already a check in the box next to DMA, select Cancel and
bypass the rest of these steps.
9. At the warning message that appears, click OK.

10. Click the OK button.

11. In Windows Me systems, click the Close button.

12. When you see the message about restarting (or shutting down) your
computer for the change to take effect, click Yes.

Enabling DMA Mode in Windows XP

To enable DMA mode in Windows XP, follow these steps:

1. Click Start, and then click Control Panel.

2. Double-click the System icon.

3. Click the Hardware tab.

4. Click the button labeled Device Manager.

5. Click the + symbol next to IDE ATA/ATAPI controllers, as shown in

Figure 7-5.
6. Double-click Primary IDE Channel.

7. Click the Advanced Settings tab.

8. Under Device 0, ensure the Transfer Mode is set to DMA if available,

as shown in Figure 7-6.
9. Under Device 1, ensure the Transfer Mode is set to DMA if available
(see Figure 7-6).
10. Click OK.

11. Double-click Secondary IDE Channel.

12. Repeat steps 7 through 10.

13. Close all open windows.

 CHAPTER 7: Basic Windows Performance Tips 109

FIGURE 7-5 Windows XP Device Manager

FIGURE 7-6 Checking the DMA setting in Windows XP

110 The Healthy PC

For all versions of Windows, if you wish to verify that your settings have
taken effect, simply repeat the instructions here for your version of Windows,
and the current settings will be displayed. If everything looks as it should,
click Cancel and close the windows. If the setting changed itself back, you
may have incompatible hardware, or there may be a device driver issue or
other reason your hardware cannot use DMA mode.

Active Desktop
Active Desktop is a Windows feature that allows you to make your desktop act
like your own personal web page. You can display pieces of your favorite web
sites directly on your desktop and keep them up-to-date automatically. Although
this might sound like a great idea, it consumes quite a bit of resources and can
cause poor PC performance. On many computers, enabling this setting not only
results in an overall decrease in system performance, but also causes an increase
in the length of time it takes your computer to start.
Most people that have Active Desktop enabled don’t even realize it; no web
sites are displayed on their desktop, nor does their desktop appear any different
than usual. However, the resources Active Desktop consumes are still being used,
regardless of how the Active Desktop is configured.
For users of Windows 98/Me, when your computer is first turned on, you may
see your desktop wallpaper appear, then disappear, and then reappear before the
boot process is complete. If your desktop wallpaper vanishes during boot, this is
a sure sign that Active Desktop is enabled.
It is my opinion that to view web pages, you should use a program designed for
such a task (a web browser like Internet Explorer), and let your desktop just be a
desktop. To do this, make sure Active Desktop is disabled.

Disabling Active Desktop in Windows 98/Me

To disable Active Desktop using Windows 98, right-click any empty area of
your desktop (not on an icon) and select Active Desktop. If there is a check next
to View As Web Page, as shown in Figure 7-7, select View As Web Page and
click to uncheck it. If there is no check next to View As Web Page, simply click
anywhere on the wallpaper to close the menu.
To disable Active Desktop using Windows Me, right-click any empty area of
your desktop (not on an icon) and select Active Desktop. If there is a check next
to Show Web Content, as shown in Figure 7-8, select Show Web Content and
click to uncheck it. If there is no check next to Show Web Content, simply click
anywhere on the wallpaper to close the menu.
 CHAPTER 7: Basic Windows Performance Tips 111

FIGURE 7-7 Active Desktop enabled on Windows 98

Disabling Active Desktop in Windows XP

To disable Active Desktop in Windows XP, follow these steps:

1. Click Start, click Control Panel, and double-click the Display icon.

2. Click the tab labeled Desktop and click the Customize Desktop… button.

3. Click the tab labeled Web.

4. Ensure there is no check next to My Current Home Page (or next to any
other items in this dialog box), as shown in Figure 7-9. If any items are
selected, uncheck them.

FIGURE 7-8 Active Desktop enabled on Windows Me

112 The Healthy PC

FIGURE 7-9 Active Desktop disabled in Windows XP

5. Click OK.

6. Click OK, and then close the Control Panel.

Unnecessary Animations
Cute mouse pointers and other visual effects can tax your computer. If you want your
computer to run at its top speed, don’t burden it with needless visual entertainment
that obstructs its ability to be as productive as possible.
Cute mouse pointers that dance about may be amusing, but unless you have a
powerful system with lots of memory, do you really want to burden your computer
and wait longer for your computer to complete tasks in exchange?
If you’re running Windows 98 or Me, you have a Desktop Themes option.
Activating this option also adds visual enhancements at the cost of performance.
 CHAPTER 7: Basic Windows Performance Tips 113

Disabling Unnecessary Animations in Windows 98/Me

To disable unnecessary animations in Windows 98/Me, follow these steps:

1. Click Start, click Settings, and then click Control Panel.

2. Double-click the Display icon.

3. Click the tab labeled Effects and uncheck all items, except for Show icons
using all possible colors, as shown in Figure 7-10.
4. Click OK.

5. Back at the Control Panel, double-click the Desktop Themes icon.

6. At the top of this window is a drop-down menu showing your current desktop
theme. Click the down-arrow to display all of the installed themes, scroll
down, and select Windows Default. Also, ensure that all of the options
listed under Settings contain check marks. Your window should look like
the one shown in Figure 7-11.

FIGURE 7-10 Windows 98 Display Effects properties

114 The Healthy PC

FIGURE 7-11 Desktop Themes settings in Windows 98

7. Click OK, and then close any remaining windows.

Using Tweak UI with Windows 98/Me

Windows 98 and Windows Me users have another tool available to them
that Microsoft provides as an unsupported download only. This means that
although Microsoft technicians consider the tool to be valuable, they have no
intention of helping you resolve any problems that may result from installing
and using it. This tool is called Tweak UI and can be downloaded from this
Uniform Resource Locator (URL): www.microsoft.com/ntworkstation/
downloads/PowerToys/Networking/ NTTweakUI.asp.
The web page that appears offers full instructions on how to obtain and install
Tweak UI. When using this tool, it’s important that you use caution when making
changes. As a general rule, if you obey the following guidelines, you should be
safe playing with all of the options Tweak UI offers.
 CHAPTER 7: Basic Windows Performance Tips 115

■ Do not change the First icon on desktop from My Documents (located at

bottom of window).
■ Do not uncheck Search Results on the Desktop tab.
■ Do not uncheck (to hide) the Tweak UI icon on the Control Panel tab.
■ Do not uncheck Show Control Panel on Start Menu Settings on the IE
(Internet Explorer) tab.
■ Do not uncheck Shell enhancements on the IE tab.

After you install Tweak UI, you’ll have a new icon in your Control Panel
labeled Tweak UI. Double-click it to start Tweak UI. From there, you can disable
many of the unnecessary Windows animations that are otherwise unavailable for
adjustment without this tool. You’ll find these settings under the General tab, as
shown in Figure 7-12.

FIGURE 7-12 Disable unnecessary animations using the General tab of Tweak UI.
116 The Healthy PC

Disabling Unnecessary Animations in Windows XP

With Windows XP, you can balance the visual effects against system performance
by turning off all visual effects, letting your system decide which to use, or picking
and choosing which effects to turn on or off. To disable unnecessary animations in
Windows XP, follow these steps:

1. Click Start, click Control Panel, and then double-click the System icon.

2. Click the Advanced tab.

3. Under the Performance section, click Settings. The Performance

Options dialog box appears, as shown in Figure 7-13.
4. The default setting is to allow Windows to determine which visual effects
to turn on and off. To turn off all effects, choose Adjust for best performance.
To use all visual effects, choose Adjust for best appearance. To turn on

FIGURE 7-13 Performance Options dialog box in Windows XP

 CHAPTER 7: Basic Windows Performance Tips 117

and off individual effects, choose Custom, and then check the effects you
want to use and uncheck the ones you don’t want to use.
5. Click OK.

6. Click OK, and then close any remaining windows.

Fonts
Excess fonts not only hog system resources, but too many of them can actually
cause your computer to crash! By default, Windows includes more than 50 fonts.
Many people choose to install numerous additional fonts on their computers.

How Many Fonts Are Too Many?

You can install a maximum of approximately 1,000 TrueType fonts in Microsoft
Windows 98 and Windows Me. The exact number of TrueType fonts you can install
varies, depending on the length of the TrueType font name and filenames. However,
you will experience a decline in system performance much earlier than when you
hit the maximum number of installed fonts allowed. Furthermore, Windows 98 and
Windows Me will not tell you when you have reached the limit of installed fonts.
In fact, those systems will even continue to let you think you are adding fonts to
your system when you actually are not.
After you reach the maximum limit of installed fonts in Windows, you (or an
installation program) can keep adding fonts to the Windows Fonts folder. The fonts
will appear to be installed because they are in the folder, but they may not appear
in the Font menu of your software. The fonts are unusable because you have exceeded
your system’s limit. When this occurs, you will find that as you delete fonts, the
number of installed fonts that is indicated in the status bar when viewing the Windows
Fonts folder does not change. This is because as you delete fonts, those extra, unusable
fonts are moving up and becoming usable again. When you finally see this number
in the status bar begin to decrease, you know you are making progress.
My recommendation is to keep under 450 fonts installed at any given time.
Doing so will allow your system and software to start faster and run much smoother.

Windows XP users can add as many fonts as their hard disk can hold.
However, while Windows XP won’t crash as a result of too many installed
fonts, it will still hinder the performance of the computer.
118 The Healthy PC

Taking Control of Your Fonts

To decrease the number of fonts on your computer, you can delete them, as follows:

1. Windows 98/Me users, click Start, click Settings, and then click Control
Panel. Windows XP users, click Start and click Control Panel.
2. Double-click the Fonts icon.

3. To see what a font looks like, double-click its icon.

4. You can delete a font by right-clicking it and selecting Delete.

Do not delete Windows system fonts, which have the extension .fon instead
of .ttf. The icon for a system font will have a red A, rather than a gray-blue
TT. Also, some applications require specific fonts, such as Arial or Times
New Roman, so you should keep them as well.

If you use a lot of fonts, you may find font-management software beneficial,
because it allows you to easily maintain control of your fonts. An excellent font-
management utility called MyFonts is available for free from www.mytools.com.
MyFonts lets you view and preview both installed and uninstalled fonts. You can
install and uninstall fonts individually or in groups. You can also print professional-
quality specimen sheets, in black and white or in full color, and you can compare
fonts. MyFonts even includes a monitoring tool that checks to see if your font system
has become unstable, as well as a counter to show you how many fonts you currently
have installed.

Windows Swap File

When Windows runs out of physical memory (random access memory, or RAM),
it creates virtual memory by placing a file on your hard disk called a swap file
(also commonly called a paging file). It’s called a swap file because the operating
system swaps data between it and main memory (RAM). Because RAM is purely
solid-state (it has no moving parts), it can communicate with the rest of the system
much faster than your hard disk, which has rotating platters and heads, similar to
a record player and needle or a CD player and laser.

How Does Swapping Work?

The hard disk was originally designed to be a storage area for your data and
programs. Since RAM requires electricity to function, all of its contents are lost
 CHAPTER 7: Basic Windows Performance Tips 119

forever once you turn the computer off. The hard disk uses magnetism to store
data, similar to how a videotape uses magnetism to store movies or an audio
cassette uses magnetism to store music. If you were to run out of RAM while
running a program (this typically occurs while using memory-intensive programs
like image-editing software), the computer would ordinarily crash. However,
Microsoft introduced an automated swap file, starting with Windows 95, which
allows it to take the overflow of data and place it temporarily on the hard disk.
While this results in slower system performance when swapping occurs, it sure
beats a complete system crash!
In Chapter 1, you learned that it was important that you had at least ten percent
of your hard disk available. Now you have a better understanding why. If Windows
runs out of RAM, and then while moving excess data to the hard disk, runs out of
space on the hard disk, you will encounter what is commonly referred to as a Blue
Screen of Death (BSOD). Once this happens, all work not previously saved is lost,
and the computer must be restarted. The computer will also need to check for data
errors on the hard disk, because any files that were in an open state when the computer
crashed may have been irreparably damaged.
When the computer reaches the end of the swap file, it behaves no differently
than it would if your hard disk were full. The result is an unexpected crash, losing
all of your work, and needing to reboot to get things going again. There is also the
risk of permanently lost data.

Swap File Misconceptions

There is much false information about how to configure a Windows swap file.
One of the most common misconceptions is that you should set your swap file’s
maximum size to 2.5 times the amount of RAM you have installed in your system.
For example, if you have 128MB of RAM installed in your computer, the
proponents of this idea would have you set your swap file maximum size to
320MB. The problem with this logic is quite simple, yet even many seasoned
technicians don’t comprehend it. The more RAM you have, the less need you
have for a swap file. This formula works in the exact opposite direction. For
example, if you have 32MB of RAM, your need for a swap file will be greater
than that of someone who has 128MB of RAM. Remember, a swap file is crucial
to have once you fill up your physical memory (RAM). Yet, with 32MB of
RAM, setting your swap file to a maximum of 2.5 times your RAM would
result in a tiny maximum swap file size of just 80MB.
120 The Healthy PC

Other people monitor their swap file usage and then set their minimum and
maximum swap file size based on an average of the maximum size the computer
has reported using in the last week or two. Because a swap file shrinks and grows,
and because the hard disk is one of the slowest components of your system,
setting the minimum and maximum size of their swap file to the same size will
ensure that the swap file will never shrink or grow. This also prevents fragmentation
from occurring and decreases the hard disk’s work during the shrinking and
growing process. This works great for a few weeks, and sometimes months—
if you are a robot and always use your computer the same way every day. But
sooner or later, you will install a new piece of software or hardware, update an
existing piece of software, or use the computer in a way you haven’t used it
before (perhaps you purchased a new scanner or digital camera and are now
editing large, detailed images). Now, your data suddenly exceeds the maximum
swap file size, resulting in an unexpected system crash.
This can be one of the most difficult problems to diagnose, because most
people will have long since forgotten they set their minimum and maximum
swap file size. They will try all sorts of misdirected techniques and advice from
friends and technical support representatives to attempt to remedy the problem.
Sooner or later, in many cases, they’ll give up and just reinstall Windows, and
everything will work again. Then they’ll conclude it was a Windows problem
all along and curse Microsoft, learning nothing in the process and never realizing
it was their own undoing months before, all in the name of “performance.”

Have you ever witnessed your computer making noise, as if it were very
busy, when you’re not even using it? Although there can be numerous
reasons for this behavior, it is commonly caused by Windows during its
automatic resizing of the swap file. Windows realizes you no longer need
this large area of hard disk space that you were previously using, so it
shrinks the swap file down to a minimal size.

Configuring Your Windows Swap

File in Windows 98/Me
Because of improvements in swap file maintenance and control with Windows XP,
manual swap file configuration is necessary for Windows 98 and Windows Me
 CHAPTER 7: Basic Windows Performance Tips 121

users only. Windows XP users do not need to make any changes and can safely
skip this section.
In the following steps, we’re going to configure the minimum swap file size
only. By setting the minimum swap file size to 300MB and leaving the maximum
swap file size alone, you allow the swap file to grow if necessary. This will also
ensure that your swap file will never shrink below 300MB (so you won’t hear
your hard disk thrashing about as often when you are not doing anything on the
computer), and that 300MB of your hard disk will always be reserved for Windows.
This way, if you fill up your hard disk entirely, there is a good chance Windows will
continue to run without running out of virtual memory.

Once you change the swap file size setting, your computer will require
a reboot. Make sure all windows and/or applications are closed before
starting this procedure.

1. Click Start, click Settings, and then click Control Panel.

2. Double-click the System icon.

3. Click the tab labeled Performance.

4. Click the Virtual Memory button, located in the lower-right side of the
dialog box, as shown in Figure 7-14.
5. Select Let me specify my own virtual memory settings, as shown in
Figure 7-15.
6. In the text box next to Minimum, type 300 (see Figure 7-15).

Do not alter the amount shown as Maximum. This number will be

the same as the amount of free space available on your hard disk. If
you see a negative number displayed here, there is no need to worry;
simply ignore it. Microsoft never planned the math used in this setting to
include hard disks that are of the massive sizes that are available today.
If seeing this negative number causes you distress, a fix is available from
Microsoft. Visit http://support.microsoft.com/?kbid=272620 for details on
how to obtain the fix.

7. Click OK.
122 The Healthy PC

FIGURE 7-14 The Performance tab of the System Properties dialog box

FIGURE 7-15 Windows 98 virtual memory settings

 CHAPTER 7: Basic Windows Performance Tips 123

8. A warning message will appear, indicating that you are no longer

allowing Windows to fully control the virtual memory/swap file, as
shown in Figure 7-16. Click Yes.
9. Click Close.

10. Click Yes when asked if you want to restart your computer

11. To verify that your settings took effect, repeat steps 1 through 4. In
Windows 98, the dialog box should show a minimum swap file size of
300, grayed out, and the maximum should read No maximum, as shown
in Figure 7-17. Windows 98 users should also be aware that any time you
view this window, the computer automatically defaults to selecting Let
Windows manage my virtual memory settings. (Recommended). This
behavior is by design and is nothing to worry about as long as you do not
click the OK button. In Windows Me, the dialog box should appear exactly
as you set it. (If your settings did not take effect, you are having other
difficulties with your computer.)
12. Click Cancel, and then click Cancel again.

13. Close any remaining windows.

Summary
You should have noticed an increase in your computer’s speed and reliability after
following the suggestions in this chapter. You also understand how not using DMA
mode, enabling Active Desktop, unnecessary animations, too many fonts, and
improperly sized swap files can hinder your system’s performance. Soon, you’ll

FIGURE 7-16 Windows 98 warning message that appears after making changes to the
swap file
124 The Healthy PC

FIGURE 7-17 Windows 98 custom virtual memory settings in effect

feel the urge to correct friends, family members, and coworkers about their
misconceptions of PC performance. You’re taking on the qualities of a full-
fledged computer nerd.
But don’t order that pocket protector just yet! In the next chapter, you’ll
learn even more in-depth ways of how to enhance your Windows performance.
 Part III
Optimize Windows Performance
This page intentionally left blank
 Chapter 8
More Windows
Performance Tips
128 The Healthy PC

Y our Windows operating system is doing the best it can to handle all of the
software demands that you have placed on it over the course of ownership.
The more you demand of it, the slower it appears to run. On the other hand, if
you instruct Windows to do less, it can give more of its attention to fewer tasks
and complete those tasks faster.

As you purchase software and hardware, you add to the burden of your operating
system. Some of this burden can be safely removed without affecting the added
software or hardware.
Software and hardware manufacturers tend to be selfish when it comes to
designing their products. They want you to have the best experience possible
with their product and will produce software that preloads and is always ready
when you need it. The idea here is that the program will start faster. As a result,
Windows slows down each time another task is added to its startup routine. Popular
programs such as Microsoft Office, Microsoft Works, and Intuit’s Quicken place
files in your startup routine, causing your Windows operating system to run slower
and take longer to start up. All of the items these programs place in your Startup
folder can be safely removed without any noticeable difference.
In this chapter, you’ll discover how you can improve Windows performance by
removing unnecessary software and disabling unnecessary programs from startup.
And if you’re a Windows XP user, you’ll find some other tips for optimizing your
computer’s performance.

Unnecessary Software and System Resources

The first step is to remove any software from your computer that you’re not using.
It’s quite common to find items that were installed over the Internet without your
knowledge or as part of another piece of software that you installed earlier. Many
times, computer manufacturers load your computer with demonstration versions
of software, as well as other items that are not only taking up your hard disk space,
but also placing additional workload on your Windows operating system.

Removing Unnecessary Software

To locate and remove unnecessary software from your computer, follow these steps:

1. For Windows 98/Me users, click Start, click Settings, and then click
Control Panel. For Windows XP users, click Start and click Control Panel.
 CHAPTER 8: More Windows Performance Tips 129

2. Double-click the Add/Remove Programs icon.

3. In the list that appears, look for software that you do not use. You may see
files such as SaveNow, New.net, Gator, Precision Time and/or Xupitor in
your list of installed programs. These are programs that promote advertising
and run in the background without your knowledge, and they can be safely
uninstalled.

Be cautious when you are uninstalling programs. If you see software listed
that you do not recognize, it’s best to leave it alone, rather than learn what
it is after you’ve removed it.

4. To uninstall a program, simply click it to select it, and then click the
Remove button. If you see a dialog box asking if it is okay to remove
a possible shared file, play it safe and click No.

Some programs may require you to restart your computer to complete the
uninstall process. If this request is made, allow your computer to restart,
and then continue removing other unwanted software, until you have gone
through the entire list.

Checking System Resources (for Windows 98/Me Users)

One of your goals is to reduce the amount of system resources consumed by
unnecessary software so that more resources are available to Windows and the
software applications that are beneficial to you. Windows 98 and Windows Me
have an inherent limitation in the way they were designed. There are a finite
amount of system resources available to these operating systems, and once you
exceed this limitation, the computer will crash.
Many people (including many computer technicians) believe that you can
increase system resources by adding more RAM to a system or increasing the size
of its hard disk. This misconception stems from a common misunderstanding of
exactly what system resources are and how Windows uses them. If, for example,
you open 30 programs at the same time, there is a good chance your computer will
run out of resources and crash. No amount of RAM or hard disk space will change
this. It’s inherent to how Windows works, and there is no known fix for it (other
than to not run so many programs simultaneously or to upgrade to Windows XP).

To learn more about the difference between system memory (RAM) and
resources, visit http://aumha.org/win4/a/resource.htm.
130 The Healthy PC

To determine the amount of system resources you currently have available (for
Windows 98/Me users only), follow these steps:

1. Click Start, click Settings, and then click Control Panel.

2. Double-click the System icon.

3. Click the Performance tab. The window that appears should be similar
to Figure 8-1 and will display the current percentage of system resources
currently available to your PC.

While viewing your system resources, check that your File System and
Virtual Memory are showing they are in 32-bit mode. A computer running
in 16-bit mode may run just fine; however, it is not running as efficiently
or reliably as it could be. This is not a critical error to fix, but if you ever
have a professional look at your PC for other reasons, you should ask the
technician about repairing this for you, too.

FIGURE 8-1 System resources reported in Windows 98/Me

 CHAPTER 8: More Windows Performance Tips 131

4. When you are finished viewing your available system resources, click the
Cancel button.

After removing items from startup, as described in the next section, be sure
to check your system resources again to see how much of a difference you made.
Always try to keep system resources above 30 percent if possible.

Disabling Unnecessary Programs from Startup

Windows juggles each program that you load. The more programs you have running
on your computer at once, the more likely it is that your computer will either run
slowly or even crash. Just as it would be easier to juggle three balls than to juggle
nine, it’s easier for Windows to load fewer programs on startup.
Although Windows XP users don’t need to worry about system resources, they
can still benefit from disabling unnecessary programs from startup. This will allow
the computer to start up faster.
Microsoft introduced a diagnostic utility called MSCONFIG with Windows 98
and has included it with Windows Me and Windows XP as well. Although this utility
was designed to make it easier to troubleshoot computer problems, it can also be
used to prevent numerous hidden programs from starting each time you boot your
computer. Some of these hidden programs are essential, but you most likely have
many that are not necessary. Turning off some of these hidden programs can
significantly increase your computer’s performance and reliability by freeing
valuable system resources.
When you run MSCONFIG, you will see a list of the items your computer
loads when it starts up. Depending on what software and hardware are installed
on your system, which items are needed or can be removed will vary. Obviously,
you don’t want to disable your antivirus or firewall software from starting when
Windows starts. Figure 8-2 shows the items a fresh installation of Windows 98
loads for itself. Figure 8-3 shows the items a fresh installation of Windows Me loads
for itself. Windows XP loads nothing by default. Use this as a partial guide of knowing
what to leave alone.
If you are uncertain what an item is, you can visit http://ww2.whidbey.net/
djdenham/Uncheck.htm for an explanation of many startup items to help you decide
if it is safe to disable the item from Windows startup. Alternatively, you can visit
http://www.pacs-portal.co.uk/startup_pages/startup_full.htm, or you can use the
search functions of Google at www.google.com to look up a specific item.
132 The Healthy PC

FIGURE 8-2 Windows 98 default startup files

Here is how to use the MSCONFIG utility to disable some of the unnecessary
programs that automatically load on startup:

1. Click Start, click Run, type MSCONFIG, and click OK.

2. Click the tab labeled Startup. The list that appears shows every item that
your computer must load and run each time you start your computer. Some
of these files are essential to the proper operation of Windows, but some of
these files can be safely unchecked so they do not run at startup.
3. After you have unchecked the items you feel are unnecessary, click OK.
Windows will then need to restart. Now, it should restart faster, depending
on how many items you deselected.
4. Windows Me and XP users will be alerted with a message once Windows
is restarted, letting you know that you have chosen to not load all items at
startup, as shown in Figure 8-4. Simply place a check in the box next to
 CHAPTER 8: More Windows Performance Tips 133

FIGURE 8-3 Windows Me default startup files

Don’t show this dialog again and click OK to prevent this message from
popping up in the future. If you make changes using MSCONFIG in the
future, it will be necessary to repeat this process.

FIGURE 8-4 Warning message that appears in Windows Me after deselecting items
from MSCONFIG and restarting the computer
134 The Healthy PC

Windows XP Performance
If you have Windows XP, there are several ways that you can improve your computer’s
performance. One way to improve performance with Windows XP is to disable any
unneeded services that are running. Another way is to turn off its error reporting
and automatic restart features. Finally, you can switch to the NTFS file system.

Disabling Unnecessary Services from Windows XP

Table 8-1 lists common services found in Windows XP and their recommended
settings for most people. Your computer may not have all of these listed services
installed or available and also may include some services not in this list.

Recommended Setting
Alerter Disabled
Application Layer Gateway Service Manual
Application Management Manual
Automatic Updates Automatic
Background Intelligent Transfer Service Disabled
ClipBook Disabled
COM+ Event System Manual
COM+ System Application Manual
Computer Browser Automatic
Cryptographic Services Automatic
DHCP Client Automatic
Distributed Link Tracking Client Manual
Distributed Transaction Coordinator Manual
DNS Client Automatic
Error Reporting Service Disabled
Event Log Automatic
Fast User Switching Capability Manual
Fax Automatic
Help and Support Automatic
Human Interface Device Access Disabled
IMAPI CD-Burning COM Service Automatic
TABLE 8-1 Windows XP Services and Recommended Settings
 CHAPTER 8: More Windows Performance Tips 135

Recommended Setting
Indexing Service Disabled
Internet Connection Firewall (ICF)/Internet Automatic
Connection Sharing (ICS)
IPSec Services Disabled
Logical Disk Manager Manual
Logical Disk Manager Administrative Service Manual
Machine Debug Manager Disabled
Messenger Disabled
MS Software Shadow Copy Provider Manual
Net Logon Automatic
NetMeeting Remote Desktop Sharing Disabled
Network Connections Manual
Network DDE Disabled
Network DDE DSDM Disabled
Network Location Awareness (NLA) Manual
NT LM Security Support Provider Manual
Performance Logs and Alerts Disabled
Plug and Play Automatic
Portable Media Serial Number Service Disabled
Print Spooler Automatic
Protected Storage Automatic
QoS RSVP Disabled
Remote Access Auto Connection Manager Manual
Remote Access Connection Manager Manual
Remote Desktop Help Session Manager Disabled
Remote Procedure Call (RPC) Automatic
Remote Procedure Call (RPC) Locator Manual
Remote Registry Disabled
Removable Storage Manual
Routing and Remote Access Disabled
Secondary Logon Disabled
Security Accounts Manager Automatic
Server Automatic
TABLE 8-1 Windows XP Services and Recommended Settings (continued)
136 The Healthy PC

Recommended Setting
Shell Hardware Detection Automatic
Smart Card Disabled
Smart Card Helper Disabled
SSDP Discovery Service Disabled
System Event Notification Automatic
System Restore Service Automatic
Task Scheduler Automatic
TCP/IP NetBIOS Helper Automatic
Telephony Manual
Telnet Disabled
Terminal Services Manual
Themes Automatic
Uninterruptible Power Supply Disabled
Universal Plug and Play Device Host Disabled
Upload Manager Disabled
Volume Shadow Copy Manual
WebClient Disabled
Windows Audio Automatic
Windows Image Acquisition (WIA) Automatic
Windows Installer Manual
Windows Management Instrumentation Automatic
Windows Management Instrumentation Driver Manual
Extensions
Windows Time Automatic
Wireless Zero Configuration Automatic
WMI Performance Adapter Disabled
Workstation Automatic
TABLE 8-1 Windows XP Services and Recommended Settings (continued)

If any of these services are active but not used on your computer, you can disable
them. For example, if you are the only user of your computer and you do not have
an Uninterruptible Power Supply (UPS)—a battery backup device that supplies
your PC with power in case of a power failure—you can safely disable the Fast
User Switching Capability and Uninterruptible Power Supply services.
 CHAPTER 8: More Windows Performance Tips 137

More information on specific services configurations and optimizations

has been compiled and made available for free on the Internet from a
gentleman who goes by the name Black Viper. His web page is very
informative and contains recommended service settings for Windows XP,
as well as other helpful computer-related information. His web site is
located at www.blackviper.com.

To view and disable services in Windows XP, follow these steps:

1. Click Start and click Control Panel.

2. Double-click Administrative Tools.

3. Double-click Services.

4. Each service is listed alphabetically on the right side of your screen. Click
the name of a service to display a description of what that service is used for.
5. Double-click the name of the service to open a dialog box with a
drop-down list that offers the options Automatic, Manual, or Disabled.
This allows you to control when or if that service should start.
6. Choose the appropriate service setting. Refer to Table 8-1 for a list of
common services and recommended settings. (Disregard services not
included in Table 8-1.) Pay attention to the description of the service.
Regardless of the recommendation in Table 8-1, if you think you need
any particular service, leave that service set to Automatic. If your
computer is already set to the setting recommended here, simply click
the Cancel button and move onto the next service.
7. After making a change to a service, click OK, and then move onto the
next one.

Turning Off Error Reporting and

Automatic Restart in Windows XP
By default, when Windows XP encounters an error, it shows a window asking if
you want to send this information to Microsoft. Most people find this window to
be an annoyance. In addition, if a critical error occurs, Windows XP is instructed
to restart itself, which may not give you enough time to read the error message
before the computer restarts. When a critical error occurs, it’s best to reset the
computer yourself once you’ve made a note of the exact error message.
138 The Healthy PC

To prevent Windows from restarting itself on critical errors and to prevent

Windows from asking if you want to inform Microsoft every time a minor error
occurs, follow these quick and simple steps:

1. Click Start and click Control Panel.

2. Double-click System.

3. Click the tab labeled Advanced.

4. Click the Error Reporting button at the bottom of the System Properties
dialog box, as shown in Figure 8-5.
5. Select Disable error reporting. Place a check in the box next to But notify
me when critical errors occur, as shown in Figure 8-6. Then click OK.

FIGURE 8-5 The System Properties dialog box in Windows XP

 CHAPTER 8: More Windows Performance Tips 139

FIGURE 8-6 Disabling error reporting in Windows XP

6. In the System Properties dialog box, in the Startup and Recovery section,
click the Settings button.
7. Uncheck the option to Automatically restart, as shown in Figure 8-7.

8. Click OK, and then click OK again.

Using NTFS in Windows XP

The way in which an operating system organizes and keeps track of files on the
hard disk is called a file system. Windows XP users will be using either a FAT32 or
NTFS file system. (Windows 98/Me users will be using a file system called FAT16
or FAT32.)
To determine which file system your computer is using, double-click the My
Computer icon located on your desktop and click Local Disk (C:). The lower-left
side of the window will display the details of the file system of the selected disk.
See Figure 8-8 for an example.
140 The Healthy PC

FIGURE 8-7 Disabling automatic restart on critical errors in Windows XP

If you’re running Windows XP and your hard disk is formatted as FAT32, use the
following steps to convert it to the more robust, secure, and reliable NTFS file system:

Before following these steps, ensure that you have a backup copy of any
important data on your computer. If you are uncertain of how to do this,
bookmark this page and come back to it after reading how to back up your
data in Chapter 9. Converting the file system will probably work flawlessly.
However, a virus or power outage during the conversion process could result
in damaging the data on the hard disk, even up to the point of necessitating
a reinstallation of Windows. This process should not be taken lightly.

1. Click Start, click Run, type CMD, and click OK.

2. Type convert c: /fs:ntfs and press the Enter key on your keyboard.

3. When the process is complete, type EXIT and press the Enter key on
your keyboard.
 CHAPTER 8: More Windows Performance Tips 141

FIGURE 8-8 Details of the file system of the C: disk on a typical Windows XP
computer

File System Facts

FAT is short for File Allocation Table. NTFS is short for New Technology
File System. NTFS was first introduced with Windows NT, hence the name.
The NTFS file system is preferred for Windows XP users because it
reduces the risk of data loss during a critical error or improper shutdown.
It also adds file security to effectively keep out uninvited, prying eyes. NTFS
also works better with larger hard disks. As hard disk size increases, so does
the complexity of keeping track of all the data contained within the disk. NTFS
handles this task much better and more reliably than FAT32.
142 The Healthy PC

By comparison, the FAT16 file system, which was included with DOS
and the first edition of Windows 95, cannot format a disk larger then 2GB.
That means that if you had a 20GB disk, you would need to separate it into
ten 2GB pieces (this is called partitioning), and each 2GB piece would be
assigned a drive letter. This would be very confusing and inconvenient.

Summary
You now have a better understanding of what system resources are and how they
relate to RAM than many computer technicians! You’ve removed some of the
workload from your PC, which will enable it to run faster and more reliably.
You’ve even learned a bit about file systems without being overwhelmed with
technical details.
You’ve come a long way since Chapter 1, and you’ve tackled some progressively
complicated computer issues each step of the way. In the next chapter, you’ll learn
whether it’s best to turn off your PC or just leave it on, as well as how to use the
Windows power settings and keep your computer running even if you have a power
failure. You’ll also learn how to make a backup copy of the data you have created,
using some of the latest gadgets that make backing up your data easy.
Can you believe you’re doing all of this on your own? And you thought this
stuff was over your head!
 Chapter 9
Safe Computing
144 The Healthy PC

E lectrical spikes, which typically occur when a storm is in your area, have cost
many a PC owner a pretty penny in repairs. Not only are you inconvenienced
by not having your PC while it is being repaired (and paying for this inconvenience),
but in many cases, you permanently lose all of your data as well.

In this chapter, you’ll learn how to protect your computer and your data from
such disasters, as well as get answers to some commonly asked questions related
to these issues.

Leave the PC On or Turn It Off?

Many people are uncertain whether it is best to leave their PC on or to turn it off.
Although there is no one definitive answer, generally speaking, it is best to turn
off the PC if it is not going to be used for more than two hours.
Leaving a computer on means allowing all the fans to turn. When the fans turn,
this circulates air through the system. As the air moves through the system, it brings
dust with it. The dust settles on the inside of the computer and acts as an insulator,
causing the system to run hotter. (When you put on a coat, you are insulating yourself.)
Over time, the system will continue to run hotter and hotter. Also, if the fan bearings
become contaminated with dust, the fans will start to vibrate and make noise. Fans
are crucial in today’s modern computers, which run very fast and very hot.
When a fan starts to fail, it is usually accompanied by a loud, vibrating noise.
If you turn off a computer with a failing fan, it’s quite possible the fan will not start
again. While the computer is running, the grease in the fan is warm, and the fan rotates
without much friction. But when the dust and grease cool down, they may form
a kind of glue. Most modern computers won’t allow the PC to turn on if the main
processor fan has failed. However, not all PCs are guaranteed to check for this. It’s
very important that you get noisy fans replaced as soon as possible for this reason.
If you have a fan that is sometimes noisy and other times quiet, ask yourself this
question: Is it quiet because it got better or is it quiet because it stopped completely?
The computer’s hard disk spins between 5,400 and 7,200 rotations per minute
(RPM). Some high-end systems have hard disks that spin from 10,000 to 15,000 RPM!
This motion creates friction. Friction creates heat. Heat causes excessive wear and
tear. The cooler your computer runs, the faster it will run. It will also be less likely
to have other heat-related errors.
 CHAPTER 9: Safe Computing 145

Even though your monitor eats up more electricity than your computer, it
still costs only pennies a day to run the monitor and computer all the time.
You can tell Windows to put components such as your hard disk and monitor
in to a low-power standby mode after a certain period of time elapses with
no PC activity. This can help extend the life of the system, but it can also
cause premature failure of the components if they are not staying in standby
mode for any considerable length of time before “waking up.”

Proponents of leaving a computer on all the time use the logic that turning the
computer on and off causes stress on the internal electronics. This is true. When
does a light bulb usually burn out? This often happens when you first turn it on.
This is because when electricity is moving through the filament inside the light bulb,
it gets very hot, very fast. This causes the filament to expand. When the light bulb is
turned off, the filament cools off and contracts. Constant expanding and contracting
of a component will eventually lead it to failure—just like taking a piece of metal
and bending it back and forth until it snaps into two pieces.
The problem with this logic is that most people will get rid of their computer
years before this damage has occurred to the point of failure. Think of it this way:
Do you leave your television on all the time? Most people will own the same
television longer than they will own any computer.
Also, if you have a high-speed, always-on Internet connection and you leave
your computer on all of the time, this can be an open invitation to bad guys to
pound on your PC at night while you are sleeping.
Computers running Windows 98/Me will eventually run out of resources if
they are left on and never restarted. This will result in a crash and will force you
to restart the computer (also called rebooting). By shutting the system down at
night, you can avoid this particular problem.

Using Windows Power Settings for Desktop Computers

If you must leave your computer on for hours unattended, you should use the
Windows power-saving settings to power off your monitor and hard disk. This
will prevent wear and tear, as well as save electricity. Over time, you’ll have a
lower electric bill, maintain a healthier PC, and even benefit the environment!
Follow these steps to use Windows power settings:

1. Windows 98/Me users, click Start, click Settings, and then click Control
Panel. Windows XP users, click Start and click Control Panel.
146 The Healthy PC

2. Double-click the icon labeled Display.

3. Click the Screen Saver tab.

4. Windows 98/Me users, click the Settings… button located in the lower-
right corner. Windows XP users, click the Power… button located in the
lower-right corner.
5. In the Power schemes section, select Always On.

6. For the Turn off monitor option, use a setting that works best for you.
Many people choose After 30 mins.
7. For the Turn off hard disks option, use a setting that works best for you.
Many people choose After 1 hour. An example of the Power Options
Properties dialog box with these settings is shown in Figure 9-1.
8. Click OK, click OK again, and then close the Control Panel.

FIGURE 9-1 Setting Power Options in Windows 98/Me

 CHAPTER 9: Safe Computing 147

I do not recommend using the System stand by or Hibernation mode for

desktop computers. Many desktop computers do not awaken from System
stand by or Hibernation modes because they were not designed to use
them. These functions are beneficial to laptop owners only.

9. Click the Advanced tab and make sure all the options available here are
unchecked.
10. Windows XP users who are not using a laptop should click the Hibernate
tab and uncheck Enable hibernation, as shown in Figure 9-2.

Using Windows Power Settings for Laptop Computers

If you are using a laptop, your power options will look a little different than they
do on a desktop computer. You have two sets of power options available: 0ne when
you are using your laptop’s battery and one when your laptop is plugged into an
electrical outlet, as shown in Figure 9-3.

FIGURE 9-2 Disable hibernation mode in Windows XP if this is not a laptop computer.
148 The Healthy PC

FIGURE 9-3 Laptop power settings in Windows XP

There is no wrong way to set the power options, but most laptop owners want
their batteries to last as long as possible, so they typically adjust the settings in the
Running on batteries section to very low numbers. This way, the laptop will conserve
more battery power if it doesn’t wait as long for user activity. Using the Plugged
in section options, the laptop owner may choose to disable power settings altogether,
or set them similar to the desktop settings described in the previous section.
Laptop owners will also see an Alarms tab and Power Meter tab. These options
are self-explanatory, and you should adjust them to your own preferences.

Do I Need a Screensaver?
Those cute screensavers can be more trouble than they are worth. Also be aware
that many free screensavers available from the Internet are spyware.
Screensavers were a necessity years ago when computer monitors were prone
to suffer from burn-in. Burn-in occurs when the same image is displayed unaltered
for hours at a time, day after day. The phosphors in the monitor literally burn from
 CHAPTER 9: Safe Computing 149

being left on, leaving a shadow-like image of the display visible, even when the
monitor is turned off. You may have noticed this at the airport on the monitors that
display the airline arrival and departure times or on commercial arcade games that are
several years old. Screensavers were used to constantly change the image on the
monitor so that no burn-in could occur.
Think of how a magnifying glass works. If you hold it over an object in the sun
at just the right angle, and do not move the magnifying glass, the object will get hotter
and hotter and eventually melt or catch fire. If you constantly move the magnifying
glass, the light doesn’t stay on the object long enough to do any damage.
Most modern computer monitors have anti-burn-in technology built into them.
Since screensavers consume resources, can cause conflicts, and offer nothing related
to productivity in return, they are simply a waste of power. Using the power options
in Windows to instruct your monitor to turn off (the monitor actually goes into a
low-power standby mode and does not actually turn off), you are not only saving
money and your screen from burn-in, but you are also not needlessly consuming
resources from your PC.
If you insist on using a screensaver, configure your screensaver so that it comes
on before you have instructed Windows to turn off the monitor. And be sure to still
allow Windows to turn off the monitor after a certain period of time elapses. For
example, many people have their screensaver come on if there is no activity on
the computer for 10 minutes, and they instruct Windows to turn off their monitor
if there is no activity for 30 minutes.
To select when you want the screensaver to activate, or to disable your
screensaver completely, follow these steps:

1. Windows 98/Me users, click Start, click Settings, and then click Control
Panel. Windows XP users, click Start and click Control Panel.
2. Double-click the icon labeled Display.

3. Click the Screen Saver tab. The dialog box that appears is self-explanatory.
Click the different options here to become more familiar with them.
4. Click OK when you are finished, and then close the Control Panel.

What’s a UPS?
An Uninterruptible Power Supply (UPS) contains a rechargeable battery that provides
power to your computer and monitor (and anything else you have plugged into it)
if you experience a power failure while working on your computer.
150 The Healthy PC

Microsoft Plus! Pack Screensavers

If you must use a screensaver, using one that is included with Windows will
reduce the chances of incompatibility problems, which can commonly occur
when using third-party screensavers.
Microsoft has released a Plus! Pack for Windows 98, Windows Me, and
Windows XP that includes some spectacular screensavers and desktop themes.
Note that the Plus! Pack installs only unnecessary software on the computer
and is for entertainment purposes only.
One of the most impressive screensavers I have seen is included with the
Microsoft Plus! Pack for Windows XP and is called Plus! Aquarium. Those
who do not have the Plus! Pack can download a demo (short for demonstration)
copy of this screensaver, called Marine Aquarium v.2.0 in the demo version,
for free (and it’s not spyware) from www.serenescreen.com. This demo will
work on Windows 98, Windows Me, and Windows XP—provided that your
computer and video card have enough power to run it. For more information
about Microsoft’s Plus! Pack for Windows XP, see www.microsoft.com/
windows/plus/PlusHome.asp.

Most clock radios have a place to install a battery (or batteries) that keeps the
time and the alarm setting, in case the power goes out while you’re asleep. This
ensures that when the power comes back on, your alarm clock will still wake you
up, rather than just reset itself with the infamous blinking 12:00. This is a form of
a UPS.
Some UPS units even filter the “dirty” power coming from your wall,
allowing a cleaner power source to your computer and peripherals. These are
called continuous UPS units. A UPS that provides power to your computer only
when there is a power failure, spike, or sag in the voltage is referred to as a standby
UPS. The standby UPS units are the most common, because they cost about half
as much as continuous UPS units.
A UPS’s main job is to buy you enough time so that you can save your work
and shut down your computer properly when a power failure occurs. You should
not continue to work on the computer during a power failure, or eventually the
batteries on the UPS will drain completely. Then your computer will be improperly
shut down and data may be lost, which defeats the purpose of having a UPS.
Also, a UPS that specifies that it can provide power to a computer and 15-inch
monitor for 20 minutes means just that. If you have your printer, speakers, scanner,
 CHAPTER 9: Safe Computing 151

and 19-inch monitor plugged into the same UPS, it will drain the batteries that
much faster.

A UPS should not be confused with a surge suppressor (sometimes

called a surge protector or power strip). You may have your computer
and peripherals plugged into a surge suppressor and believe you are
protecting them from power surges and spikes. More than likely, the surge
suppressor you have is little more than a convenient way to plug many devices
in, since the electrical outlet in your wall has only two plugs available. Most
surge suppressors sold for under $15 do little, if anything, to actually protect
your computer or peripherals.

Like a cordless phone or any other device that uses batteries, the UPS’s
batteries will eventually go bad (usually in two to three years). In most cases, the
UPS batteries cannot be replaced, so you will need a new UPS unit. Also, because
of the rechargeable batteries, it is illegal in most counties in the United States to
dispose of UPSs along with your regular household garbage. They must be taken
to a proper disposal/recycling facility. Most manufacturers of UPS units will
provide, on request, a shipping label to a recycling service, so you can send the
unit to a facility for proper disposal.
One of the largest UPS manufacturers is American Power Conversion Corp.
(APC). This company sells units that will plug into your computer’s USB port and
will instruct the computer to power down automatically if the electricity does not
come back on before the UPS unit’s batteries run out of juice. To see this company’s
offerings, visit www.apcc.com.
If you’re interested in learning more about UPS units and surge protectors,
visit http://computer.howstuffworks.com/surge-protector.htm.

What Is a USB Port?

If your computer is a Pentium II or higher, chances are it has at least one USB
port. USB stands for Universal Serial Bus. It was designed because manufacturers
were improperly using the computer’s printer port (also called a parallel port)
for hooking up scanners, Zip drives, and other devices that are clearly not printers.
Many people had problems getting these devices to work, especially if they had
more than one device plugged into the printer port. Since most computers have
only one printer port, this meant that manufacturers of scanners and Zip drives
had to provide an additional printer port on their device so people would have
somewhere to plug in their printer.
152 The Healthy PC

Some people would plug their scanner into their computer’s printer port,
their Zip drive into the spare port on the back of the scanner, and their printer
on the spare port of the Zip drive. Getting this configuration to work was
a challenge, and even impossible in some cases.
The introduction of the USB port meant that all of the configuration issues
could be avoided by implementing a new standard interface for computer
peripherals. Using USB, you simply load the drivers for your USB device,
and then plug your device into the USB port.
Another advantage to USB is that you can add and remove devices while
the computer is on. This makes it very convenient if you have a USB device
that you want to use only periodically, such as when transferring images from
a digital camera or making backups.
Most older computers came with only two USB ports, usually located
directly under the keyboard and mouse ports on the back of a computer.
Newer computers include up to six USB ports, including one or two on the
front of the computer. For example, you may want to plug in your digital
camera to your computer to transfer the pictures. Rather than reach around
the back of the computer trying to locate a USB port, you could simply plug
it into the front of the PC for quick, easy access.
There are three kinds of USB. USB 1.0 and 1.1 transfer data at 12 megabits
per second (Mbps). The newer USB 2.0 standard allows transfer speeds of
480 Mbps (about 40 times faster). You can plug in as many as 127 devices
that can share the USB bandwidth. (The more devices you add, the slower
each one will go if you’re using them at the same time.) USB 2.0 is backward-
compatible with USB 1.0 and 1.1; however, if you plug a USB 1.0 or 1.1 device
into a USB 2.0 socket, every USB device (regardless of which USB version
each device supports) will run at the slower 1.0 or 1.1 speed.

Back Up Your Important Data!

A hard disk may fail without warning. One day it worked fine, and the next day it’s
dead (just like a light bulb). New viruses are written every day, and even a power
outage while the computer is on can cause data loss, not to mention the possibility
of theft or an accident. By taking a little time now to make a backup copy of your
data, you’re buying a little peace of mind. You will know that if something catastrophic
happens to your hard disk, your data will be safe.
 CHAPTER 9: Safe Computing 153

Many people don’t know how to make a backup copy of data and simply think
that they’ll do it some other day. I guarantee that once you’ve lost all your data
unexpectedly (and it will always be unexpectedly and usually at the worst possible
time), you will learn how to make backups and back up your data religiously.
When many people think of making a backup, they believe that they must back
up the entire hard disk. This is not only unnecessary and time-consuming, but it
can be extremely challenging to recover such a backup. Since most backup devices
need Windows to operate or to load software, that would mean you would need to
reinstall Windows in order to restore your backup of Windows. Now, that doesn’t
make too much sense, does it?
Other people believe that copying data from one internal hard disk to another
is a good backup system. Some people are under the false impression that creating
a separate partition on their hard disk for their data is an effective backup. They
couldn’t be more wrong. Internal hard disks can fail at any time; they are prone
to viruses, theft, fires, floods, or other disasters. The only backup worth making
is one you can store away from the computer.
If your hard disk fails, it’s enough of a hassle to need to reinstall and reconfigure
Windows, your printer, scanner, email, and numerous other applications. As long
as you have the original installation CDs, this is a mere annoyance. Now imagine
you have no backup of all the data you created with those programs. Sure, your
computer is up and running again, but what good is it without all the things you
created? Digital pictures, music, genealogy, checkbook information, and so
on—all lost forever. Yes, you could contract with a hard disk recovery service,
but that can run in the thousands of dollars, and most people don’t think their
data is worth that much or can afford that service.
No special software is required to back up your data, and your data is all you
should be concerned with backing up. Remember that you can reinstall programs,
but you may never be able to re-create data exactly as it was before (and even if
you could, do you really want to do that?).
There are numerous ways to back up your data: using floppy disks, Zip disks,
CD-ROM and DVD-ROM recorders, tape drives, external hard disks, and USB
thumb drives. Because floppy disks and tape drives are unreliable and slow, and
CD-ROM and DVD recorders require special software to make CDs and DVDs,
I’ll explain how to back up your data to a Zip disk, an external hard disk, or
a USB thumb drive.
154 The Healthy PC

A Zip disk looks similar to a floppy disk in size and shape (only a little
thicker) and can store 100MB, 250MB, or even up to 750MB of data,
depending on which model you own. Zip disks require a Zip drive to be
used, just as a floppy disk requires a floppy drive. A single 250MB Zip disk
can store as much data as 173 floppy disks. To learn more about Zip drives,
visit www.iomega.com.

Using a USB Thumb Drive

A USB thumb drive is a very small, solid-state (no moving parts; everything is
electronic rather than mechanical) device that can quite commonly fit comfortably
on a key chain. Manufacturers have unique names for these drives, but they are
generically called thumb drives, or sometimes flash drives, because they store data
using flash memory. Figure 9-4 shows an example of a USB thumb drive available
from Trek 2000 International Ltd. (www.thumbdrive.com).
Flash memory is a type of electrically erasable programmable read-only
memory (EEPROM) chip. For example, all digital cameras use flash memory
to store the pictures they take.
Are your eyes glazing over yet? Don’t worry! All you need to know is that
these devices can store your data safely for up to 10 years, can withstand 1,000 g’s
of shock, are immune to magnetism (unlike floppies and Zip disks), can safely go
through airport x-ray machines, and can take more abuse than any other kind of

FIGURE 9-4 A USB thumb drive offered by Trek 2000 International Ltd.
 CHAPTER 9: Safe Computing 155

consumer-based media. They are highly reliable and very durable, not to mention
easy to use and configure, as well as inexpensive.
USB thumb drives come in a range of capacities and designs. Several
manufacturers offer features for security and data privacy to differentiate their
products from the competition. All USB thumb drives can be erased and overwritten
thousands of times. Typical sizes available for USB thumb drives are 16MB, 32MB,
64MB, 128MB, 256MB, 512MB, 1GB, and 2GB.

GB is short for gigabyte and is equal to 1,000MB. MB is short for megabyte

and is equal to 1,000 bytes. A byte is typically represented by one letter,
number, space, or symbol.

A floppy disk holds 1.44MB of data, is prone to data errors, and can be ruined
if you get a magnetized screwdriver (or any other magnet) too close to it. The smallest
USB thumb drive is equivalent to the data capacity of over 11 floppy disks, and it
doesn’t require a special drive to read it, unlike a floppy disk, CD-ROM, or Zip
disk. All you need is any computer with a spare USB port and you’re in business.
Moving data from one computer to another and making backups couldn’t be simpler.

Backing Up Your Data

Ultimately, where you store your data is up to you. Microsoft products like to
default to the My Documents folder. If you make it a point to store all of your
pictures, music, and other data in the My Documents folder, all you’ll need to do
to back up your data is copy the My Documents folder from the C: drive (your
hard disk) to your USB thumb drive, Zip drive, or external hard disk (provided
they have enough free space available to hold your data).

Most data files are relatively small, but pictures and music can take up
quite a bit of room. You may need to purchase additional storage media
to back up pictures and music files, or use your CD or DVD recorder
(if you have one) for long-term storage of pictures and music.

Just about every program that you can run within Windows has a File menu
at the top of the screen. You simply load your data into whatever program you
are using, and then click File, choose Save As…, and select the My Documents
folder as your destination storage area.
156 The Healthy PC

After all of your data is located in the My Documents folder, you can copy that
directory to your backup device. Here are the steps for copying the My Documents
folder:

1. Double-click the My Computer icon on your desktop and double-click

your C: drive.
2. Windows XP users, double-click the folder labeled Documents and
Settings, and then double-click the folder that should be labeled as your
Windows logon name.
3. Double-click the My Documents folder in the list that appears.

4. Click Edit and click Copy. Then close the window.

5. Double-click My Computer and double-click the backup drive (the drive

letter will vary from one PC to another, depending on the PC’s unique
configuration).
6. Click Edit and click Paste.

Your data is now being duplicated to your backup device. When the backup is
completed, close any remaining windows. Then, be sure to put your backup copy
in a safe place.

Summary
In this chapter, you’ve learned how your PC uses power, the facts about screensavers,
how to protect your computer from power outages and power spikes, and how to
protect your precious data.
I can tell you’re anxious to learn more because you’ve made it this far on your
own and you’re excited that you’re actually “getting it.”
The next chapter will be a little more challenging, but using what you’ve already
learned, I’m sure you’ll understand everything just as easily. In that chapter, you’ll
learn about upgrades. Which upgrades are worth the investment of money and
time? You’ll soon know the answer to this question and many more!
 Chapter 10
Computer Upgrades
158 The Healthy PC

I n this chapter, you’ll learn about computer upgrades—which upgrades are

worthwhile, which ones you can do yourself, and which ones are best left to
professionals. Finally, it will help you determine when it’s best to just start over
with a new computer. You’ll want to know all this before spending any money
on a computer upgrade.

Upgrading Your Operating System

If you’re running Windows 98/Me and have been considering upgrading to Windows
XP, you should know that the minimum requirements listed on the Windows XP
box are not adequate for a pleasant experience with Windows XP. You should have
at least an 800MHz computer with at least 256MB of RAM (memory). Although
Windows XP will install on slower computers with less memory, it will operate
exceptionally slowly. You’ll be wondering why everyone talks about how great
Windows XP is when Windows 98/Me ran much better for you.
Because the newer operating system is more stable and easier to use, its
programming is more complex, and it demands more from your system.
When you are upgrading your operating system, keep in mind that installing
one operating system on top of another is not recommended. Although Microsoft
does offer upgrade versions of their operating systems for much less money than
the cost of the full version, you can still use the upgrade version for a full installation,
as long as you own a “qualifying product.”
A fresh installation of the upgrade version of Windows XP Home edition will
eventually stop and ask you to insert your Windows 98/Me CD. At this point, the
installation temporarily stops, waiting for you to remove the Windows XP installation
CD and insert your Windows 98/Me CD. After you have done that, click OK, and
the Windows XP installation will verify that you own a qualifying product. Then it
will instruct you to reinsert your Windows XP upgrade installation CD and continue
with the install.

Never upgrade an operating system over a preexisting operating system in

an effort to fix a problem. In many cases, corrupted files are not replaced,
and invalid information contained within the Windows registry will remain,
causing the upgraded operating system to be extremely unreliable, if it
even runs at all.
 CHAPTER 10: Computer Upgrades 159

Adding Memory (RAM)

Adding RAM to your computer will help it run faster. However, tests show that
Windows 98/Me does not efficiently use more than 192MB of RAM under common
usage. What this means to you is that adding anything more than 192MB of RAM
to a Windows 98 or Windows Me computer will not make much difference in how
the computer performs, unless you use a specialized application that handles memory
on its own, such as Adobe Photoshop.
Windows 98/Me can also actually have problems if more than 512MB of RAM
is added. Ironically, Windows 98/Me systems with more than 512MB of RAM
installed may start to experience out-of-memory errors. Although Microsoft has
posted a workaround for this (http://support.microsoft.com/?kbid=253912), Windows
won’t efficiently use the memory anyway. I recommend that you save your money
and not exceed 256MB of RAM on any Windows 98/Me computer.
Windows XP users will benefit from adding more memory without any caveats.
Windows XP will use whatever you give it.

Do I Need More RAM?

To determine how much RAM you have now, follow these steps:

1. Windows 98/Me users, click Start, click Settings, and click Control
Panel. Windows XP users, click Start and click Control Panel.
2. Double-click the System icon.

3. In the General tab, the amount of RAM your computer has installed will
be displayed in the lower-right part of the window, as well as what kind of
central processing unit (CPU) is installed, as shown in Figure 10-1.

If you’re running Windows XP and the amount of installed RAM is less than
512MB, consider upgrading your RAM. If you’re running Windows 98/Me and the
installed RAM is less than 192MB, I would recommend upgrading your memory
only if you intend on keeping the system for another year. Adding RAM to an old
system will not increase its value and only benefits you by making the machine
a bit more responsive, reducing your wait times.
160 The Healthy PC

FIGURE 10-1 Windows 98 System Properties dialog box showing installed RAM

CPU Speed
When viewing the General tab of the System Properties dialog box, Windows XP
users will also see the actual speed of their processor. Note that it may be necessary
to round the number, since Windows XP tends to be literal in its discovery process.
For example, a 350MHz processor may be displayed as 348MHz. This is normal
and nothing to be concerned about.
Windows 98/Me users will need to either watch for their CPU speed to be
displayed when the computer is first turned on or download a utility that can
present this information to you. SiSoftware Sandra (www.sisoftware.co.uk)
works with all Windows operating systems and can give you such details (and
much more) about your system.
 CHAPTER 10: Computer Upgrades 161

What Kind of RAM Is Compatible with My System?

If your computer has a Pentium III or Duron CPU, chances are your computer will
require synchronous dynamic RAM (SD-RAM). However, except for the earliest
models, most Celeron, Athlon, and Pentium IV CPUs require double data rate
synchronous dynamic RAM (DDR-RAM). Also, to confuse things even further,
some Pentium IV systems use Rambus dynamic RAM (RD-RAM).
Each type of RAM—SD-RAM, DDR-RAM, and RD-RAM—has its own
unique design and will fit only into a computer specifically designed for it. RAM
is relatively inexpensive and very easy to install. If your computer is manufactured
by a major manufacturer such as Hewlett-Packard, Compaq, Dell, eMachines,
Gateway, or IBM, you can look online to see what type of RAM your computer
requires. Visit one of the major RAM manufacturers online at www.kingston.com
or www.crucial.com and find the name and model of your PC in their database. If
your computer was built by a local shop or by a friend, relative, or someone else,
take your computer into a computer shop and have the shop’s technician determine
what kind of RAM your PC requires.
There is a limit to how much RAM can be installed, and this limit varies from
one PC design to another. The web sites mentioned in the previous paragraph will
tell you the maximum amount of RAM that your particular computer can handle.
You may then choose to note this information and buy the RAM from a local
retailer, or you might want to purchase it from the manufacturer directly online
while at the RAM manufacturer’s web site.

Plugging in RAM
RAM is literally plug-and-play. It is important that your computer be unplugged
from electricity and that you are well grounded, to avoid static-shocking any of
the components inside the computer. Avoid touching the inside of a computer
while standing on carpeting for this reason. Static electricity can cause damage
to electrical components, even if you don’t feel the static shock. You can purchase
an anti-static wrist strap (highly recommended) for less than $10 at most computer/
electronics retail stores, and you should wear it whenever working on components
inside a computer.
Be aware that each computer has a limited number of sockets available to add
RAM modules. If there are three sockets and they are all filled, you will need to
remove one of the RAM modules to make room for your new one. Also, some RAM
modules are incompatible with each other, even though they are the right type of
162 The Healthy PC

RAM for your computer. For this reason, I recommend that you purchase RAM
in the largest size available for your system that you can afford and remove all
old RAM to avoid these problems.
When plugging the RAM into the computer, it will only go in facing a certain
direction. Be careful to line up the notch on the RAM module with the notch on
the socket. Each side of the RAM module should click into place when seated
properly.
The detailed steps for adding RAM vary depending on the type of RAM your
computer requires. RAM is sold as an OEM (original equipment manufacturer)
product, or as a retail “boxed” product. While you may save money purchasing
OEM RAM, it will not come with any instructions. OEM implies that the product
is intended to be sold to PC manufacturers and therefore does not contain any
instructions or retail packaging. It is generally sold as a memory stick in an anti-
static bag. Nothing more, nothing less.
Retail boxed RAM will contain actual plastic packaging around the product
along with detailed instructions on how to install the RAM. Because the installation
varies slightly depending on the type of RAM your computer requires, I recommend
purchasing the retail boxed RAM and following the instructions that come with it.
While the retail boxed RAM will cost a few dollars more, for a novice, it’s worth
the slight added cost for the detailed and helpful installation documentation.
For more information on how to install RAM, please visit www.pny.com/
install/desktop.asp.
Once your RAM is installed, be sure to test it and verify that all of your
computer’s memory is recognized by your system using Memtest86, a free tool
that you can download from www.memtest86.com. If the RAM fails any test,
exchange it for a new RAM module immediately.

Upgrading Your Monitor

Many people want to buy the fastest computer with as many bells and whistles as
possible, but then they get a cheap monitor.
The monitor is the single most important part of your computer. Your computer
is completely worthless without it. You can purchase any new monitor, without
worrying about compatibility problems. All new monitors will work with your PC;
however, an older monitor may not work with a newer PC.

What’s the Viewable Area?

Monitors are measured diagonally, and the glass tube, or CRT (Cathode-Ray Tube),
in a monitor is measured before it is installed in the plastic casing. A glass monitor
 CHAPTER 10: Computer Upgrades 163

typically has about an inch of the screen that is behind the plastic and cannot be
seen. For this reason, a glass monitor that measures 17 inches will typically have
a 15.9-inch viewable area.
Liquid crystal display (LCD) monitors do not have any lost screen area. Thus,
a 15-inch LCD monitor actually displays 15 inches (imagine that!). A 15-inch LCD
monitor has a viewable area that is similar to that of a 17-inch glass monitor.

LCD or Glass?
Even though LCD monitors are all the rage, they are not recommended for people
who like to play action games. Although the technology is improving, most LCD
screens simply do not refresh the screen information fast enough, resulting in fast
images leaving a trail. For example, if you were watching a tennis match on a typical
LCD screen, the tennis ball would appear to have a tail as it streaked across the screen.
The high-end LCD monitors have solved this problem, but they are cost-prohibitive
for most people.
On the other hand, if you work for hours on end in front of your computer dealing
mainly with text, you may find that an LCD monitor is easier on your eyes and on
your electric bill. It also frees up quite a bit of space on the top of your desk.

Purchasing a very inexpensive LCD monitor may result in poor image

quality. Just because it’s an LCD monitor doesn’t automatically make
it better.

There are now flat-glass monitors that have great picture quality with no distortion,
and they are offered at a fraction of the cost of LCD monitors. I recommend a 19-inch
flat-glass monitor for price and picture quality balance.
When shopping for a glass monitor, look for the smallest dot pitch and highest
refresh rate. The smaller the dot pitch, the sharper the image. When shopping for
an LCD monitor, look for a higher-contrast ratio (for example, 450:1 is much better
then 300:1). Some high-end LCD monitors also require a special video card with a
DVI (digital visual interface) connector. Only high-end LCD monitors require this
type of connector, so unless you have a high-end LCD monitor now, chances are
you want an LCD monitor that has a standard analog video connector and not a DVI.
Be aware that some high-end LCD monitors have the capability to use either type
of connector.
In addition, most monitors from major manufacturers come with a three-year
warranty. Although you might save money buying a no-name brand monitor,
consider anything less then a three-year warranty suspect.
164 The Healthy PC

For more information about monitors, visit http://computer.howstuffworks.com/

monitor.htm.
Finally, don’t let anyone tell you which monitor is better than another. Let your
eyes decide. Each individual’s eyes are unique. If you cannot see a difference between
a $250 monitor and a $700 monitor, purchase the cheaper one!

Upgrading Your CPU

If you’re considering upgrading your computer’s CPU (central processing unit)
to something faster and more modern, it will probably require a new motherboard,
new memory, and a new CPU fan, along with the new CPU. It may also require
a new, more powerful power supply (new CPUs require 300 watts minimum), a
new video card, and a new hard disk. If you fail to upgrade these last two components
when upgrading your CPU, your system will be no faster than the slowest component.
Hence, you might as well just replace the computer.
It rarely makes sense to upgrade a CPU. The easiest CPU upgrades are when
you are upgrading within 12 months of purchasing your computer. Since the upgrade
is a minor boost in speed, and the computer is still relatively fast and new, most
people don’t think it’s worth the trouble. As time progresses, however, manufacturers
will have improved other components as well, and upgrading the CPU is no longer
enough.

Upgrading Your Hard Disk

A hard disk that spins at 7,200 rotations per minute (RPM) will transfer data faster
and actually run quieter than the old 5,400 RPM hard disks. Also, modern hard disks
have large onboard caches available to help speed up the transfer of data. It’s not
uncommon to find a modern hard disk that has an 8MB cache built into it. Quite
often, manufacturers will offer a hard disk with or without this 8MB cache, and
the difference in price is usually less than $20. This cache allows the hard disk to
operate faster, and many hard disk manufacturers offer a three-year warranty on
the hard disks that have the 8MB cache option, while offering only a one-year
warranty on the hard disks without the cache.
Hard disks can be tricky and confusing to install, and there are numerous
limitations on hard disk size that are associated with the age of your computer.
For example, there was no such thing as a consumer-based 40GB hard disk in
1998. As a result, a computer purchased in 1998 will not be able to recognize a
40GB hard disk without a lot of technical help. Consider the following limitations:
 CHAPTER 10: Computer Upgrades 165

■ Early 486 computers cannot see any hard disk greater than 528MB in size.
■ Later 486 computers and Pentium I computers cannot see any hard disk
greater than 2GB in size.
■ Later Pentium I computers can recognize a maximum hard disk of 8GB.
■ Many systems built before 1999 cannot see hard disks larger than 32GB.
■ Most modern computers cannot recognize a hard disk greater than 127GB
in size.

So, if you have an old Pentium II computer, upgrading its hard disk to a
new 120GB hard disk may not be possible. The technology that exists today to
allow 120GB hard disks did not exist years ago when that computer was designed.
Also, transferring data from one hard disk to another, as well as configuring disks
to work together, can be very complicated. For this reason, I recommend seeking
the help of a professional if you’re considering replacing or adding another hard
disk to your system.
Finally, keeping an old hard disk attached to a new hard disk will slow down
the new hard disk. If you want to take as much advantage of the new hard disk as
your system will allow, be sure to leave the old hard disk out of your system once
the new hard disk is installed. Of course, this varies depending on just how old
your “old” hard disk is. A professional technician can advise you if your old hard
disk is worth keeping.

Upgrade Your Internet Connection

If you spend a lot of time on the Internet, you may find that having high-speed
Internet connection allows you to accomplish much more in much less time. Many
people have a second phone line ($20 a month) and pay for their Internet access
($22 a month). Consider that you could spend $45 a month to get a connection that
is as much as 100 times faster, is less frustrating, and keeps your phone line free.
Some people think that they don’t need a high-speed connection. They say, “I
just use the Internet for simple things like e-mail and some web surfing.” Of course
that’s all they use it for! Anything else is too frustrating and time-consuming. After
they have a high-speed connection available, the way they use the Internet will change.
Once you get used to having high-speed Internet access, you’ll wonder how
you ever got along with dial-up access as long as you did—no more disconnects,
no more busy signals, and no more waiting.
166 The Healthy PC

If you currently have America Online (AOL), you can get high-speed
Internet access and still keep your AOL account, but cut your monthly
fee from AOL in half. Call AOL and say that you won’t be needing to
dial in to AOL (freeing up the phone lines for other members). Then
you can access AOL directly through your high-speed Internet provider.
AOL will discount your monthly rate by more than 50 percent as a result.
Everybody wins!

Replacing Your Computer

If your computer was built before the year 2000, it’s probably best to think
about purchasing a new computer rather than putting any money into a PC
that old. Computers running slower than 800MHz should also be considered
for replacement, rather than upgrading.

Limitations of Proprietary Computers

Major manufacturers such as Dell, Hewlett-Packard, Gateway, and E-machines
build many of their systems using proprietary components. This means that no
one else can provide you replacement parts except that specific manufacturer. This
may not be an issue while your machine is under warranty, but once your warranty
expires, it becomes important. For example, a simple $30 power supply in most
computers is an $80 power supply from Dell. Any other type of power supply
may simply not fit or, in some cases, could cause a fire!
Many of the major manufacturers use a marketing gimmick called shared memory.
This is when the video card is built into the motherboard, rather than being a modular
(removable) circuit board that can be unplugged and replaced. Using shared memory
means that the video card has no memory of its own and it must “share” your main
RAM. Thus, if you have 128MB of RAM installed in your computer, but your video
card is reserving 8MB for its use, only 120MB will be available to Windows. That
doesn’t sound like the definition of sharing that I am familiar with; that sounds more
like stealing. The result is that a system with a shared memory video card will run
slower than an equivalent system with a modular video card.

Which Computer Should I Get?

If you see two computers at the store with the same specifications but a different
price, I can assure you the cheaper computer either runs slower or has less of a
warranty (or both). Having a computer built to meet your needs is preferred, but
there are risks: some shops go out of business, leaving you with no warranty, or
they may sell you inferior components.
 CHAPTER 10: Computer Upgrades 167

Ask around and get opinions from friends. If they know of a local small business
owner who has treated them well, get a price comparison and don’t be afraid to ask
questions. In many cases, knowing a decent small business owner can be like having
your own trusted doctor or mechanic. There is a level of personal service that the
large corporations simply cannot offer.
On the other hand, if you feel more comfortable with a major brand name
computer, ask the company representatives if they sell computers that do not have
proprietary components (so you can customize every aspect of the computer). See
what the price difference is. If a proprietary computer is all you can afford, be sure
you are aware of its limitations before making the purchase.
Finally, check out www.epinions.com to look up reviews by typical buyers like
yourself. You can find information about computer manufacturers and the individual
models of computers you are considering purchasing. When you do make that
purchase, you are welcome to leave a review of your experience at epinions.com
to let others know and help them in their future purchasing decisions. It’s free and
offers critiques from “real people” on everything from restaurants to vacation spots
to electronic gizmos and even movies.

Summary
In this chapter, you’ve learned all about the upgrade possibilities available to you.
Decisions, decisions!
The next chapter presents some practical performance and tune-up tips. You’ll
learn how to blow out the dust and dog/cat hair from inside your PC, ensure that all
of your cooling fans are operating properly, and even delete temporary files manually
(Windows has a reputation for leaving numerous temporary files untouched during
its automated removal process).
You’re almost finished. At the rate you’re going, you’ll soon be ready to start
teaching others!
This page intentionally left blank
 Part IV
Advanced Topics
This page intentionally left blank
 Chapter 11
Preventive Maintenance
172 The Healthy PC

A side from everything you’ve already accomplished thus far throughout

this book, there are additional steps you can take to ensure that your computer
continues to run trouble-free. Removing dust and debris from inside the computer on
a regular basis, as well as looking for early indications of problems, can help you
stay one step ahead of your computer failures.

This chapter will show you what to look for and what to do to keep your
computer running in tip-top shape.

Maintain Computer Parts

Like any other physical item, over time, your computer gets dusty. You will need
to remove the computer case to get rid of the dust. While you have the computer
case off, you can check two other computer parts: the fans and the capacitors.

Blow Out Dust and Debris

As your computer is running, air is moved through the system to help keep it cool.
Ironically, this air also brings with it dust and pet hair, which act as an insulator,
causing the components that they collect on to run hotter. In extreme cases, this
additional heat can be responsible for system instability or even permanent failure.
For this reason, it’s imperative that you open the computer case and blow out
this dust and debris. Computer cases all open uniquely. Some have screws in the
back that allow the cover to be removed. Others, such as Dell computers, require
no tools and simply snap open with the press of a lever. Some require the face of
the computer to be removed to reveal the screws holding the cover on. On some
old Packard Bell computers, screws from the bottom of the case needed to be
removed to get the side panels off. Some computers have individual panels on
the left and the right; others, such as some Dell computers, open on a hinge while
others may open by removing the entire outer shell.
Be sure to have everything unplugged before attempting to remove any covers
or side panels, and never force anything. Everything should fit snuggly, but not to
a point that it requires excessive force. If you cannot determine how to open your
computer case, this process may be best left to a professional.
Once you have the inside of the computer exposed, use a can of compressed
air (which can be purchased from any electronics or computer store) to blow out
the dust and debris. You may want to take the PC outside prior to doing this to keep
 CHAPTER 11: Preventive Maintenance 173

your house clean. Be sure to remove dust from the fans and power supply, where it
tends to collect the most. Do not spray the air into your floppy drive or CD-ROM
drives, because the force with which it comes out could damage them. Spray the
inside of the PC only, and continue to spray until you no longer see clouds of dust
coming out.

Ensure All Fans Are Operating Properly

While you have the computer cover removed, temporarily hook up the PC and turn
it on. With the power on, visually inspect all of the cooling fans. They should spin
freely without stuttering or stalling. If any of the fans inside your computer fail to
spin or are not spinning with consistency, plan on getting those fans replaced as soon
as possible. When fans are not spinning freely as they should, your computer will
run hotter than normal. If a fan has completely failed, chances are your computer
will fail, too. Proper cooling is essential. Today’s CPUs run at temperatures of
120 to 190 degrees Fahrenheit, and that is when they are being properly cooled!
If you hear a grinding noise and want to determine which fan is causing the
disturbance, use any plastic tool to force the fan to stop while it is running. Do not
do this excessively. Stop the fan only long enough to determine if the noise stops,
which should take less than two seconds. Using plastic will ensure that you will
not receive an electric shock. Be careful not to touch any of the electronics in the
computer while performing this diagnostic.
Be aware that some video cards also have fans, and those fans are not easily
viewed. Accelerated Graphics Port (AGP) video cards mount upside-down. You
may need to get down on your knees to position yourself, and use a flashlight to
inspect a video card fan. The AGP video card, if you have one, is always the first
card, closest to the top of the computer.
If you discover that the fan in your power supply is not spinning or is making
noise, it is recommended that you replace the entire power supply. Working inside
a power supply can be dangerous. Even with the power off, there are components
that store electricity within a power supply (called capacitors) that can electrocute
you. A power supply is fairly inexpensive and usually pretty straightforward to replace.
Do not attempt to replace the fan inside a power supply, or otherwise open a power
supply for any reason. There are no user-serviceable parts inside a power supply.
Simply unplug the computer, unplug all of the internal power connectors that come
from the power supply, remove the screws that hold the power supply in place from
the back of your PC, and replace it with one of a similar design and capacity.
174 The Healthy PC

Verify That the Capacitors on the

Motherboard Are Not Leaking
Many computers sold from 2000 to 2002 were manufactured with defective
capacitors. Thus far, only two manufacturers have admitted it (Abit and IBM);
others prefer to act as if they have no idea about this problem.
A leaking capacitor may not cause any system problems at first, but over time,
as more and more electrolyte leaks out, the computer may behave erratically, lock
up, be completely unusable, or even, in the most catastrophic cases, start to smoke
and catch fire.
A capacitor looks similar to a small battery. When it leaks, it looks similar to
a leaking battery.
While you have your computer case off, use a flashlight to inspect the
capacitors. Look for any bulging or leakage from the top and bottom of all capacitors,
as shown in Figure 11-1. Do not come in contact with any of the leakage. If you

FIGURE 11-1 Leaking capacitors

 CHAPTER 11: Preventive Maintenance 175

should accidentally get the leaking electrolyte on your skin, immediately wash the
affected area thoroughly with soap and water. Although the electrolyte is probably
harmless, it’s always better to be safe than sorry. Don’t worry—the electrolyte won’t
spray out at you. The only way you will get electrolyte on your skin is if you touch
it or brush against the leaking capacitor.
If you find bulging or leaking capacitors, your computer’s main board, or
motherboard, will need to be replaced. If your system is under warranty, this
replacement will be done at no charge. It’s important that you inspect your
computer early and often for this problem so that you’re not stuck with the
repair bill.

The motherboard is the largest circuit board in your PC. All the other
circuit boards plug into the motherboard (main board), as do the RAM
and CPU.

If you would like to learn more about this phenomenon, visit my web site at
www.careyholzman.com for pictures and in-depth articles about how and why this
happens, along with the latest news on class-action lawsuits being brought against
specific manufacturers.

Download the Latest Drivers

A driver is a piece of software that instructs Windows how to communicate with
a specific piece of hardware. Your printer has a driver, as does your video card,
sound card, and even some motherboards. From time to time, the manufacturers
of the hardware optimize their drivers and improve their efficiency and reliability.
However, you won’t know if there are any updated drivers for your hardware unless
you check for yourself.
A prime example of a company that updates its drivers quite often is NVIDIA,
the video card manufacturer. If you own one of the very popular GeForce video
cards, chances are you are running an old, outdated driver.
Many people find that their computers run smoother, crash less often and, in
many cases, operate faster after updating a major driver, such as the video card.
The original driver may have had bugs or other issues associated with it that were
repaired in later versions of the driver. Updated drivers typically fix problems and
work more efficiently and cooperatively within Windows than older versions.
If your system is running just fine and you have no complaints, then don’t “fix” it.
On the other hand, if your system is unstable or slow (or both), or you would just
like it to run a little faster, consider updating your drivers.
176 The Healthy PC

Checking Your Current Drivers

To help you determine what brand and model of hardware you have, as well as
what version driver you are running, we’ll step through the process, using your
video card as a primary example.

1. Windows 98/Me users, click Start, click Settings, and click Control
Panel. Windows XP users, click Start and click Control Panel.
2. Double-click the System icon.

3. Windows 98/Me users, click the Device Manager tab. Windows XP users,
click the Hardware tab, and then click the Device Manager button located
in the center of the window.
4. Click the + symbol next to Display adapters. The name and type of your
video card will appear, as shown in Figure 11-2. In this example, the video
card is manufactured by a company called STB, and the model of the card
is called a Velocity 128.

FIGURE 11-2 Determining your video card in Windows 98/Me

 CHAPTER 11: Preventive Maintenance 177

5. Double-click the name of the video card that appears. The Properties
dialog box will open.
6. Click the Driver tab, and then click the Driver File Details… button if you
are running Windows 98/Me, or click the Driver Details… button if you are
running Windows XP. This window will display the driver files and their
version number, as shown in Figure 11-3. In this example, we are running
version 4.10.01.7194.

Checking for New Drivers

After you’ve gotten the details about the driver installed on your computer, visit
the manufacturer’s web site to see the latest version of the driver available. The
following are some common video card manufacturers’ sites:

■ NVIDIA, www.nvidia.com
■ ATI, www.ati.com
■ S3 Graphics, www.s3graphics.com
■ SiS, www.sis.com

FIGURE 11-3 Determining the version of a driver in Windows 98/Me

178 The Healthy PC

If your card manufacturer is not listed here, try using the Google search
engine to look for the make and model of your card. In this example, we’ll visit
www.google.com, and type STB Velocity 128 Driver Download in the search
box, and then click Search. The search will reveal either the location of the company,
or other web sites that may contain the driver you’re looking for, should the
company no longer be in business.
In some cases, you may not be able to find your video card manufacturer’s web
site. For example, the manufacturer of the video card shown in Figures 11-2 and
11-3, STB, used to be located at www.stb.com; however, the company has long
since gone out of business, and no newer drivers are available. Also, if you have
a Voodoo card or Diamond MultiMedia card, you won’t have much luck reaching
their web site, because those are other companies that have gone out of business.
If the version number of the available driver is higher than the version you
currently have, it would be wise to update the driver. Follow the manufacturer’s
specific instructions to update your drivers. If you are having a difficult time
understanding the version numbers, you could always download and install the
latest driver available from the manufacturer just to make sure you have the newest
driver installed on your computer.
Aside from video cards, other companies such as Iomega (who manufactures
the Zip drive) also update their drivers quite frequently.
If your motherboard has a VIA chipset, visit www.viaarena.com and download
and install the latest VIA 4in1 drivers. If you are uncertain if your computer has
a VIA chipset, the next time you have the cover off and are blowing out the dust,
look for any chips on the motherboard that say VIA on them. If you spot one, you
have a VIA-based motherboard.

If this seems too complicated, you can try visiting www.drivershq.com

and run their Driver Detective. It automates the process, removing all
the guess work. It will report when updates are available; however, it
will cost you $29.95 a year to actually get the updates from them. You
can also download a utility called DriverMagic, available from www
.rubymicro.com/drivermagic.html, but, once again, you must pay for
this service. Finally, as a last resort, you can visit www.driverguide.com,
which is completely free and has a vast resource of drivers from numerous
manufacturers.

If you have an Intel CPU, chances are you do not have a VIA-based main board.
If you have an AMD CPU, chances are you do have a VIA-based main board, although
you should check to verify before installing the VIA 4in1 driver.
 CHAPTER 11: Preventive Maintenance 179

Be very careful when updating drivers. Selecting and installing the wrong
driver can cause severe system problems. If you install the wrong driver
by mistake and you are using Windows Me or XP, use the System Restore
feature to return your computer back in time, as explained in Chapter 12.
If this process makes you nervous, don’t update your drivers.

Removing Temp Files Manually

In the first chapter of this book, you learned how to instruct Windows to automatically
delete the temp files. Now that you are more familiar with your PC, your operating
system, and how to navigate it, you’re ready to learn how to manually remove the
temp files Windows leaves behind, even after you’ve instructed it to remove them.
Unfortunately, Windows deletes only the temp files it’s familiar with and will
leave all other temp files alone. Because other programs within Windows create
temp files, you need to remove those files manually. Over time, those files can take
up quite a bit of hard disk space. Since the program that used these temp files has
long since abandoned them, it’s always safe to delete them.

Deleting Temp Files in Windows XP Systems

The following steps show how to delete temp files manually on a Windows XP
computer. If, during this process, you receive an error message that the file cannot
be deleted or access is denied, that simply means that one (or more) of the temp
files you are trying to erase is currently in use by Windows. Take note of the name
of the file, close the error message box, and then look through the list of files to
find the one that caused the error. All of the files should remain highlighted and
typically the file you’re looking for will be at or near the top of the list. While holding
down the CTRL button on your keyboard, click that file to deselect it (while leaving
the others highlighted). You may need to repeat this process several times.
Before we begin, we need to determine what name you are logged into the
computer as. It may be your name, or maybe a generic name depending on who
initially set up your computer when you first got it. To determine what your user
name is, click Start, click Run and type taskmgr and click OK. Click the very last
tab labeled Users; the name listed under Users is the name you are logged in as.
Once you’ve determined your user name, close the Task Manager window by
clicking on the X in the upper-right corner of the window.
180 The Healthy PC

If the name you are logged in to Windows XP with is not your name,
don’t worry. The name can be anything. The only reason we need to know
it now is to locate where your temp files are stored. For a shortcut to this
information, click the Internet Options icon in the Control Panel and click
the Settings button. In the middle of the window that appears you’ll see
Current Location: C:\Documents and Settings\. Make a note of this info,
as this is where you will need to go to manually remove temp files.

1. Double-click the My Computer icon, and then double-click the C: drive.

2. You may receive a warning message that says, “These files are hidden. This
folder contains files that keep your system working properly. You should
not modify its contents.” Figure 11-4 shows the Local Disk (C:) window
with this message. As long as you follow the instructions in this book,
there will be no danger. Click Show the contents of this folder.
3. Double-click the Documents and Settings folder.

FIGURE 11-4 Windows XP warning message when attempting to access files on the
hard disk
 CHAPTER 11: Preventive Maintenance 181

4. Locate the folder with your logon name and double-click it (do not select
the Default User or All Users folder).
5. In the menu bar at the top of the window, click Tools, and then click
Folder Options.
6. Click the View tab. Make sure Show hidden files and folders is
selected, as shown in Figure 11-5, and then click OK.
7. Double-click the Local Settings folder, and then double-click the
Temp folder.
8. In the menu bar at the top of the window, click View, click Arrange
Icons by, and click Type.
9. Scroll through the list to find the first file that ends with .tmp and click it.
Continue scrolling through the list and, while holding down the SHIFT key,
click the last file that ends in .tmp. This will select all of the .tmp files.
10. Press the DELETE key on your keyboard.

11. When finished, close any open windows.

FIGURE 11-5 Windows XP View settings

182 The Healthy PC

Deleting Temp Files in Windows Me Systems

The following steps show how to delete temp files manually on a Windows Me
computer. If an error occurs during this process, it simply means that one or more
of the temp files you are trying to remove is currently in use by Windows. Take
note of the name of the file, close the error message box, and then look through
the list of files to find the one that caused the error. All of the files should remain
highlighted, and, typically, the file you’re looking for will be at or near the top
of the list. While holding down the CTRL key on your keyboard, click that file to
deselect it (while leaving the others highlighted). If you make a mistake, you can
start over by holding down the CTRL key and pressing the A key on your keyboard.
This is a keyboard shortcut that will highlight (select) all of the files.
Once the file is deselected, try again to delete the remaining files. If another
error message occurs, take note of that file and deselect it as well. Repeat this process
as necessary. There are typically no more than eight files currently in use, so don’t
get frustrated if you get the error message a couple of times. And remember that the
files will most likely be easy to find, because they should be at the top of the list.

1. Double-click the My Computer icon, and then double-click on the C: drive.

2. Click View, located in the menu bar at the top of the window, and click List.

3. Click View (again), click Arrange Icons, and click By Name.

4. The contents of the C: drive should be displayed alphabetically (the yellow

folders are alphabetized separately from the files). If the window opens
without any content, as shown in Figure 11-6, click View the entire
contents of this drive.
5. Double-click the yellow folder named Windows.

6. You may receive a warning message that says, “This folder contains files
that keep your computer working properly. Please be careful if you modify
the contents of this folder.” As long as you follow the instructions in this
book, there will be no danger. Click View the entire contents of this folder.
7. Click View, and then click List.

8. Click View, click Arrange Icons, and click By Name.

9. Double-click the yellow folder named TEMP.

10. Click View, and then click List.

 CHAPTER 11: Preventive Maintenance 183

FIGURE 11-6 Windows Me hiding the contents of the C: drive

11. Click Tools, and then click Folder Options….

12. Click the View tab. Make sure Show hidden files and folders is selected.
Also ensure that the option (located right below it) Hide file extensions for
known file types is unchecked. Then click OK.
13. Click Edit, and then click Select All (you should see the entire contents of
this folder highlighted).
14. Press the DELETE key on your keyboard. Click Yes when asked if you are sure.

15. Close the window.

Deleting Temp Files in Windows 98 Systems

The following steps show how to delete temp files manually on a Windows 98
computer. If an error occurs during this process, it simply means that one (or
more) of the temp files you are trying to remove is currently in use by Windows.
Take note of the name of the file, close the error message box, and then look through
184 The Healthy PC

the list of files to find the one that caused the error. All of the files should remain
highlighted, and, typically, the file you’re looking for will be at or near the top of
the list. While holding down the CTRL key on your keyboard, click that file, and it
should be deselected (while leaving the others highlighted). If you make a mistake,
you can start over by holding down the CTRL key and pressing the A key on your
keyboard. This is a keyboard shortcut that will highlight (select) all of the files.
Once the file is deselected, try again to delete the remaining files. If another
error message occurs, take note of that file and deselect it as well. Repeat this process
as necessary. There should not be more then five files currently in use, so don’t get
frustrated if you get the error message a couple of times. And remember that the
files will most likely be easy to find, because they should be at the top of the list.

1. Double-click the My Computer icon, and then double-click on the

C: drive.
2. Click View, located in the menu bar at the top of the window, and then
click List.
3. Click View (again), click Arrange Icons, and click By Name.

4. The contents of the C: drive should be displayed alphabetically (the

yellow folders are alphabetized separately from the files). Double-click
the yellow folder named Windows.
5. You may receive a warning message that says, “Modifying the contents of
this folder may cause your programs to stop working correctly.” Of course,
if you follow the directions in this book, modifying the contents as instructed
may cause your programs to start working correctly. So, click Show Files.
6. Click View, and then click List.

7. Click View, and then click Folder Options….

8. Click the View tab. Make sure Show all files is selected. Also ensure that
the option (located right below it) Hide file extensions for known file
types is unchecked, as shown in Figure 11-7. Then click OK.

9. Double-click the yellow folder named Temp. (Depending on your

computer configuration, you may have to select Show Files again,
as explained in step 5.)
10. Click View, and then click List.
 CHAPTER 11: Preventive Maintenance 185

FIGURE 11-7 Windows 98 View options

11. Click View (again), click Arrange Icons, and click By Name.

12. Click Edit, and then click Select All (you should see the entire contents
of this folder highlighted).
13. Press the DELETE key on your keyboard. Click Yes when asked if you
are sure.
14. Close the window.

Summary
In this chapter, you’ve learned how to remove the dust and debris from inside
your computer to help keep it running cooler, as well as what to check for early
detection of failing components. You also learned how and why to update device
drivers, and how to manually locate and remove those pesky temp files Windows
186 The Healthy PC

leaves behind. Being proactive with your PC maintenance will ensure your PC
remains as reliable and responsive as possible.
In the next and final chapter, you’ll learn what to do when things go wrong before
calling a technician and spending any money. Using built-in Windows features to
take your computer back in time to when it was working properly can resolve most
software issues. The next chapter will introduce you to some problem resolution
options you may not know exist.
Hang in there! You’re almost finished, and your PC couldn’t be happier or
healthier, thanks to you!
 Chapter 12
What to Do When
Things Go Wrong
188 The Healthy PC

W hen good computers go bad, it can be a frustrating experience trying to set

things right. To help with this problem, Windows Me includes a great utility
called System Restore. With System Restore, the computer automatically protects
its own critical files and backs up the Windows Registry at regular intervals, all by
itself. Microsoft improved System Restore with the release of Windows XP, allowing
an even greater chance of returning your computer to a working and reliable state.

Another helpful tool for finding out what is wrong with your computer is Safe
Mode, which starts up your computer with only the necessary Windows components
loaded. Safe Mode is available to Windows 98, Windows Me, and Windows XP users.
In this chapter, you’ll learn how to use System Restore and Safe Mode to rescue
your computer when things go wrong. You’ll also learn what software to never
install on your system.

System Restore
Wouldn’t it be nice if you could send your crashed computer back in time to when
it was working correctly? Well, Windows Me and Windows XP users can do this,
thanks to a Microsoft feature called System Restore, included with those operating
systems.

What Does System Restore Do?

Using System Restore, you can restore your computer to the last-known good
Windows configuration; in other words, to the same state it was in the last time it
was working correctly. If your computer suddenly stops working properly, simply
start System Restore.
When you start System Restore and choose to repair your computer, a calendar
appears, showing you all of the restore points that have been made. Choose the
date closest to the time that you know the computer was operating properly, and
the computer configuration will be resurrected to the same condition it was in on
that day.
If your system suddenly won’t start Windows properly, try booting into Safe
Mode (following the steps in the “Safe Mode” section later in this chapter), and
then use System Restore while in Safe Mode. In many cases, if you are not having
a hardware problem, your system will work just as it did on the restore date you
selected.
You should know that the System Restore utility monitors only critical
Windows files and specific Windows configuration files, such as the Registry.
It will not recover lost data, nor will it erase any data that was created after the
 CHAPTER 12: What to Do When Things Go Wrong 189

restore point date you select. Simply put, it changes only the condition of Windows.
If you installed a program yesterday, and you restore to the day before yesterday,
the data will remain, but Windows will be returned to a state prior to that software
being installed. Then you can install that software once again, but you might not
want to if it was the cause of your problems.

You can also create your own restore points manually (in addition to the
ones that Windows creates for you automatically). For example, you might
want to do this prior to installing any new software on your computer. To
make a restore point, click Start, then Programs, then Accessories, then
System Tools, then System Restore. In the System Restore window, select
Create a restore point and follow the simple onscreen directions.

Using System Restore (for Windows Me/XP Users)

To run System Restore on a Windows Me or Windows XP computer, follow
these steps:

1. Click Start, click Programs, click Accessories, and click System Tools.

2. Click System Restore.

3. In the window that appears, select Restore my computer to an earlier

time, as shown in Figure 12-1, and then click Next.
4. The next window displays a calendar with dates on which restore points
have been made in bold print, as shown in Figure 12-2. If you click once
on a bold date, a brief description of that restore point will be displayed.
Choose the nearest date that you know your computer was working properly
and click Next.
5. The next window that appears warns you to close any open programs and
to verify that you want to execute this procedure. Windows Me users will
need to click OK to close the warning dialog box before continuing. If
you are certain you want to restore your computer to the date you selected,
click Next.
6. The computer will restore the Windows configuration back to the date
you selected, and then automatically restart Windows. A message will
be displayed immediately when Windows restarts, confirming the restore
operation was successful. (If the restore operation failed for any reason,
try booting the computer in Safe Mode and repeat this process, only try
an earlier restore point.) Click OK to allow Windows to complete its
startup routine.
190 The Healthy PC

FIGURE 12-1 Starting System Restore in Windows Me/XP

FIGURE 12-2 Choosing a restore point from the System Restore calendar
 CHAPTER 12: What to Do When Things Go Wrong 191

Safe Mode
Windows 98, Windows Me, and Windows XP have the ability to start up in a very
basic mode called Safe Mode, in which only the necessary Windows components
are loaded. Starting your computer in this mode can help you to diagnose if a problem
is software- or hardware-related. Safe Mode also allows many Windows 98 and
Windows Me users to use the Scandisk and Defragment utilities on their hard disk
without interruption (see Chapter 1 for information about using these utilities).
When your computer is in Safe Mode, the text “Safe Mode” will appear in
all four corners of the screen. Also, your screen will look different, because only
16 colors will be displayed, instead of the larger display of colors you are accustomed
to seeing.
The following sections describe how to configure your computer to start in
Safe Mode using the MSCONFIG, or System Configuration, utility (introduced
in Chapter 8), if you can start your computer into Windows normally. If this is
not possible, or if you prefer, you can also start the computer in Safe Mode by
repeatedly pressing the F8 key on your keyboard when you first turn on your
computer, but before the Windows logo appears. Many people have a difficult
time getting the timing just right for this to work properly, however. So, if you
can get Windows started, try the techniques described here.

You cannot install any software while in Safe Mode. Safe Mode is intended
for diagnostic and repair purposes only.

Starting Windows 98/Me Systems in Safe Mode

If you can start the computer normally into Windows 98 or Windows Me, follow
these steps to configure the computer to restart in Safe Mode:

1. Close all windows.

2. Click Start, click Run, and type msconfig, as shown in Figure 12-3.
Then click OK.
3. The System Configuration Utility window appears, as shown in
Figure 12-4. Click the Advanced button.
4. When the Advanced Troubleshooting Settings dialog box appears, place
a check next to Enable Startup Menu, as shown in Figure 12-5. Then
click OK.
5. Click OK once more.
192 The Healthy PC

FIGURE 12-3 Running the MSCONFIG utility in Windows Me

6. You will be prompted to restart the computer. Click Yes.

7. When the computer restarts, a menu will appear. Select Safe Mode using
the arrow keys on your keyboard, and then press ENTER. If you do not
make a selection within 30 seconds, Windows will boot normally. When
instructing the computer to start in Safe Mode, be patient—the startup
process may take several minutes.

FIGURE 12-4 The System Configuration Utility window in Windows Me

 CHAPTER 12: What to Do When Things Go Wrong 193

FIGURE 12-5 Enabling the Windows Me Startup menu to access Safe Mode

When you are finished with Safe Mode, repeat these steps, but in step 4,
uncheck Enable Startup Menu, and then restart the computer when prompted.

Starting Windows XP Systems in Safe Mode

If you can start the computer normally in Windows XP, using the MSCONFIG
(System Configuration) utility is the easiest and the recommended way to restart
the computer in Safe Mode. Follow these steps to run Windows XP in Safe Mode:

1. Close all windows.

2. Click Start, click Run, and type msconfig, as shown in Figure 12-6.
Then click OK.
3. The System Configuration Utility window appears. Select the tab labeled
BOOT.INI.
4. Place a check next to the /SAFEBOOT option, as shown in Figure 12-7,
and then click OK.
194 The Healthy PC

FIGURE 12-6 Running the MSCONFIG utility in Windows XP

5. You will be prompted to restart the computer, as shown in Figure 12-8.

Click Restart. The computer will now restart in Safe Mode. Be patient;
this may take several minutes.

When you are finished using Safe Mode, repeat these steps, but in step 4,
uncheck /SAFEBOOT. Then close all programs and restart the computer when
prompted.

FIGURE 12-7 Choosing the /SAFEBOOT option to boot in Safe Mode in Windows XP
 CHAPTER 12: What to Do When Things Go Wrong 195

FIGURE 12-8 Choosing to restart the computer after selecting a Safe Mode boot

Software to Avoid
The marketing companies would have you believe their software will fix your
computer, make it run faster and more reliably, and/or make your Internet connection
faster. Don’t believe them.
For example, “uninstall” or “Registry cleaner” software is often touted as a
remedy for correcting software problems and cleaning up your computer. However,
in my experience, uninstall software is a waste of time. Registry cleaners typically
cause more problems than they solve. The best any of this software can do is cover
up the problem with a software band-aid. This is not only an unreliable way to fix
things, but in many cases, the original problem continues to get worse and you
may also have some new problems.
Stay away from purchasing software that emphasizes how much you need it.
That is your first clue that you probably don’t need it. Marketing companies tend
to play with words to manipulate the perspective of value. For example, you often
see the promotion “Buy one, get one free!” If you could literally get one free, then
it should cost you nothing. So, they should just give you the free one. But you cannot
have the free one until you purchase one first. What they really mean is, “Buy one,
get one at no additional cost.” This kind of deception is allowed, and most people
are aware of the true meaning of “free” in these advertisements. However, promoters
of many of the products advertised in email, pop-ups, and web pages on the Internet
are not abiding by federal truth-in-advertising laws.

Don’t purchase anything you learned about from an unsolicited email!

This only proves to the spammers that spamming creates more sales. This
encourages them to spam even more in an effort to increase sales.

When considering a software purchase, do some research using Google or

www.epinions.com to find out if it’s really worth buying. See if a demonstration
version (demo) is available. By downloading and using a demo, you can discover
in advance if the product is worth your hard-earned money.
196 The Healthy PC

Summary
Congratulations! You’ve made it to the end of this book! Your PC is much healthier
today than it was just a short time ago, and you’ve learned quite a bit through the
process.
If you’re feeling more confident about your computer abilities and would like
to learn even more advanced tips, tweaks, and information, be sure to visit my web
site at www.careyholzman.com.
If any section of this book has left you confused or you have a question that
was not answered in this book, please email me directly. I would also like to hear
what you thought about this book, including any critiques, suggestions, corrections,
recommendations, or praise. I personally answer each email I receive and would
love nothing more than to hear from you. You can reach me at Carey@CareyHolzman
.com (remember that email addresses are never case-sensitive).
If you are eager to learn more, I highly recommend picking up a subscription
to one of the two largest PC publications, PC Magazine or PC World. For less than
$20 a year, you’ll receive the latest PC-related news, reviews, tips, tweaks, and
editorials. While some of the stories may not hold your interest, and others may be
too technical, there will always be something in each issue you’ll find beneficial.
You can also read many of these magazines online for free. PC Magazine’s web
site can be found at www.pcmag.com and PC World’s web site can be found at
www.pcworld.com.
Thank you for purchasing this book! I hope it not only saved you a lot of
money from purchasing unnecessary software, but also increased your confidence
with your computer by better understanding how computers work and how to improve
your computer’s performance.
Since you can now appreciate nerd humor, I’ll leave you with this final story:
A computer technician happens across a frog in the road. The frog pipes up,
“Help me! A wicked witch has turned me into a frog. But, if you’ll kiss me, I’ll
turn back into a beautiful princess.”
The technician shrugs his shoulders, picks up the frog, and puts it in his pocket.
A few minutes later, the frog says, “Okay, if you kiss me, I’ll stay with you for
a month!”
The technician nods and puts the frog back in his pocket.
A few minutes later, the frog says, “Turn me back into a princess and I’ll stay
with you for a year and give you anything you want!”
The technician smiles and walks on.
Finally, the frog says, “What’s wrong with you? I’ve promised to stay with you
for a year and give you anything you want, and you still won’t even kiss me?”
“I’m a computer technician,” he replies. “I don’t have time for a girlfriend. But
I think having a talking frog is pretty neat!”
 Part V
Appendixes
This page intentionally left blank
 Appendix A
Free Technical Support
200 The Healthy PC

I f you ever find yourself needing help with your computer, or if you have any
computer-related questions, realize that the Internet is your best friend and
resource. You can get assistance through technical support web sites, PC user
groups, and Internet newsgroups.

Technical Support Web Sites

There are several web sites dedicated to helping others. Although there are some
web sites that charge for technical support, my advice is to try the free services
first. The following are some web sites that offer free, courteous, friendly, and
accurate technical support, with no strings attached.

■ www.Protonic.com
■ www.SupportFreaks.com
■ www.5starsupport.com
■ www.helponthe.net
■ www.pctechbytes.com
■ http://aumha.org
■ www.CareyHolzman.com

For help with Microsoft products, visit http://support.microsoft.com and use

the Microsoft Knowledge Base, where many common questions and problems
are already addressed.

PC User Groups
A PC user group is a group of people who attend a meeting, usually once a month,
to discuss computers, have their questions answered, and learn more about PCs.
There are many local PC user groups across the country.
Most user groups are free; some will ask for donations, subscriptions, or a
very modest annual fee. I am not aware of any PC user group that would turn
away anyone, regardless of membership dues. Membership is based on an honor
system in most cases.
Most PC user groups are attended primarily by retirees looking to help one
another and share their knowledge. Regardless of your age or experience, PC user
 APPENDIX A: Free Technical Support 201

groups welcome everyone. The larger organizations will even have professional
presenters from companies such as Microsoft, promoting their latest software,
demonstrating how it works, and offering it at a discounted price to members
of the user group (often before the software is available for sale at the store). To
find a PC user group in your area, visit http://www.winnetmag.com/usergroups.

Newsgroups
Another way to find an answer to a technical problem is to use the public newsgroups.
The public newsgroups are a part of the Internet where people post messages to the
world at large. The posting works similar to email, except anyone can read and respond
to your message. You must manually look through the newsgroup to see if anyone
responded to your message; it will not arrive in your email. However, this can be
one of the most satisfying and fastest ways to get a technical question answered.
Microsoft hosts its own newsgroups. To learn how to use these newsgroups,
follow the directions offered at http://support.microsoft.com/newsgroups/
default.aspx.
Newsgroups are not just about computers, either. There are newsgroups dedicated
to discussing everything from needlepoint, to the latest episode of your favorite
television show, to car repair, diseases, and genealogy. If you can imagine it, there
is a group of people on the newsgroups discussing it in detail and at length.
To learn more about how newsgroups work and how to use them, visit
http://computer.howstuffworks.com/newsgroup.htm.
This page intentionally left blank
Appendix B
Networking
204 The Healthy PC

W hat is a network? When two or more computers are connected together,

this is called a network. When you connect to the Internet, you are
becoming part of a very large network. Computers that are connected within
the same building are in a LAN, or local area network. Computers that connect
over a large distance are connected to a WAN, or wide area network. Numerous
computers (for example, in a typical office building) are typically connected
together, forming a LAN, and have Internet access, so they are connected to
a WAN at the same time.

If you have two or more computers, you can share your Internet connection
between them using a consumer-based router. With a consumer-based router, all
computers can access your Internet connection independently and simultaneously.
You can also share data files and printers between the computers. Regardless of
the operating system, all PCs can be networked together.
All Windows-based computers connect very easily. Yes, if you have Windows 95
on one PC, Windows XP on another, and Windows Me on another, they will all
communicate with each other (if configured properly). Although you typically
cannot share programs or scanners or other hardware devices, you can transfer
the data that comes from those devices from one machine to another.
Many people have opted to replace home intercom systems with Instant Messaging
programs like AOL Instant Messenger (www.aim.com), MSN Messenger (http://
messenger.msn.com), Yahoo Messenger (http://messenger.yahoo.com), or ICQ
(www.icq.com). Sending typed messages, using a PC microphone and speakers to
speak, or even using a web cam to teleconference is becoming an easy, convenient,
and free way to communicate from one room in the house to another, or even across
the world.

There are very few scanners that will work over a network. They are
specialty devices and cost quite a bit more than ordinary scanners for
this added feature.

Networking PCs sounds complicated, but it’s actually quite simple when
you follow the appropriate directions. There are numerous web sites that provide
step-by-step instructions on how to set up networking, as well as troubleshooting
guides for when things don’t go as they should. If you’re interested in learning
more about how to network your home or small office, visit any of the following
web sites for more information:
 APPENDIX B: Networking 205

■ www.homenethelp.com
■ www.practicallynetworked.com/howto
■ www.wown.com
■ www.CareyHolzman.com/netfixes.htm
This page intentionally left blank
 Appendix C
System Resources
208 The Healthy PC

W hat’s the difference between resources and memory? We briefly touch

on this topic in Chapter 8. This appendix addresses the issue of system
resources because it’s important to understand the inherent limitations of
Windows 95/98/Me to have a better overall computing experience.

If you’re a person who has numerous applications open at the same time
(called multitasking), you’ve probably experienced extreme system performance
degradation and blue screen error messages from time to time that require you
to restart your computer. We call people who frequently multitask power users,
because they make the computer work so hard. Although adding memory to
a system will help keep it responsive while multitasking, it won’t help increase
system resources and prevent crashes.
Windows 95/98/Me will allow only a certain number of programs to run
simultaneously. This number varies, depending on how much each program taxes
the operating system.

Windows 95/98/Me users can use a tool that comes with Windows
called the Resource Meter. When activated, this tool acts like a fuel
gauge for resources. It constantly monitors and reports your resource
usage in a small graphic display next to your clock in the system tray.
Of course, running it consumes resources (ironic, isn’t it?), but not
many. You can learn more about this tool and how to activate it at
www.computerbits.com/archive/2000/0800/resourcemeter.html.

System resources are one of the most misunderstood aspects of PCs. Even
most PC technicians do not understand that system resources cannot be adjusted
in Windows 95/98/Me. Some individuals may be “clever” enough to “hack” Windows
and thumb their noses at such limitations, but these hacks always come at a price
of reliability and performance. Windows internal modifications made by such
individuals not only violate Microsoft’s license agreement, but ultimately are
not helping anyone when things start to go wrong.
Unfortunately, the system resource limitations with Windows 95/98/Me have
no easy, reliable workaround or fix. Spending money on more memory or a larger
hard disk will only affect the speed of the computer. If your computer is crashing
because it is running out of resources, adding memory will only allow it to crash
faster. The only way to fix this is to either not run so many programs at the same
time or to upgrade your operating system to Windows 2000 or XP.
If you are currently using Windows 95/98/Me, it would behoove you to understand
more about system resources and how the operating system is affected by them.
 APPENDIX C: System Resources 209

The following web sites have some great, easy-to-understand information on

this topic:

■ www.windows-help.net/techfiles/win-resources.html
■ http://aumha.org/win4/a/resource.htm
■ www.annoyances.org/exec/show/article07-104
■ http://home.cfl.rr.com/bjp/Resources.htm
This page intentionally left blank
 Appendix D
Windows 98/Me Help!
212 The Healthy PC

T his appendix contains a brief compilation of the most common Windows 98/
Me problems and their possible solutions.

How can I turn off that annoying error reporting with Internet Explorer 6 in
Windows 98/Me?
See this Microsoft Knowledge Base article at http://support.microsoft.com/
?kbid=276550.

I keep getting a buffer error while recording a CD with my CD-Recorder in

Windows 98/Me.
Download and install Cacheman from www.outertech.com. It has an optimized
cache setting for CD burning.

When I right-click with the mouse, the system requests a disk be inserted into
drive A (a floppy disk drive).
Do you have a program called StuffIt installed? If so, you can find the fix at
www.aladdinsys.com/support/techsupport/win/dswin/dswin3.html.

Every time I right-click the mouse on any file or folder, it always activates my
floppy drive.
See this Microsoft Knowledge Base article at http://support.microsoft.com/
?kbid=216752.

Every time the computer is turned on, the Scandisk program runs.
See this Microsoft Knowledge Base article at http://support.microsoft.com/
?kbid=273017.

How can I turn off the annoying floating toolbar in Internet Explorer 6?
In the Control Panel, double-click Internet Options, and click the Advanced
tab. Scroll down the list to the Multimedia heading, and uncheck the box that says
Enable Image Toolbar.

Anytime I awaken my computer when the screensaver is running, there will

be an empty box in the Taskbar.
This box goes away when you click it, but in most cases, you can clear this up
by updating your video drivers. You can also try reducing the Hardware Acceleration
setting for your display adapter, as follows:

1. Right-click My Computer, click Properties, and then click the

Performance tab.
 APPENDIX D: Windows 98/Me Help! 213

2. Click the Graphics button, and then move the Hardware Acceleration
slider two notches to the left.
3. Click OK, click Close, and then click Yes to restart your computer.

My image preview has just decided to stop previewing images!

To repair image view, click Start, click Run, type regsvr32 thumbvw.dll, and
click OK. Image preview should now work correctly.

Why does my computer take forever to update hardware information?

This problem is caused by an incompatibility with Symantec’s Norton System
Doctor and Windows Me. Norton System Doctor creates several thousand zero-byte
files in your C:\Windows\Inf directory. You must delete these zero-byte files. More
information on this problem and how to prevent it from occurring in the future can
be found at http://support.microsoft.com/?kbid=281967.

How can I change Internet Explorer’s small buttons back to the larger buttons?
In Internet Explorer, click View, click Toolbars, and click Customize. Then
select Show text labels from the drop-down menu that appears on the lower right,
across from Text options.

In Windows Me, suddenly a CD won’t start automatically when I insert it.

1. Click Start, click Settings, click Control Panel, and then double-click
the System icon.
2. Click the tab labeled Device Manager, click the ‘+’ symbol next to
CDROM and then double-click the entry for your CD-ROM drive.
3. Click the Settings tab, and make sure there is a check in the box next to
Auto Insert Notification.
4. Click OK, click Close, and then click Yes when you are prompted to
restart your computer.

If this does not fix the problem, see this Microsoft Knowledge Base article for
an alternate solution: http://support.microsoft.com/?kbid=177880.

When I reboot Windows Me, sometimes I see the message, “Windows could
not upgrade the file %1 from %2 %1:%2.”
You have disabled System Restore and you have deleted the _Restore
directory. As a result, Windows cannot find the directory necessary to create
214 The Healthy PC

a restore point. Enable System Restore to fix this problem. (See Chapter 12 of this
book for details on using System Restore.)

How can I set Windows Explorer to always start at the root (beginning) of the
C: drive, rather than in My Documents?
See this Microsoft Knowledge Base article at http://support.microsoft.com/
?kbid=130510.

My Start button is blank (it no longer displays the word “Start”), and all the
tabs in all windows are blank as well, with no text in them.
This occurs when the text color chosen is the same as the background color.
Click Start, click Settings, and click Control Panel. Double-click the Display
icon, click the Appearance tab, and choose the Windows default scheme.

My password is not being saved and/or the login screen keeps coming up
when Windows 98/Me starts.
There are numerous settings that need to be set correctly, so we will work
through each one to ensure it is properly set.

1. Click Start, click Settings, click Control Panel, and double-click the icon
labeled Passwords. Click the tab titled User Profiles and make sure the
option All users of this computer use the same preferences and desktop
settings is selected. Then click OK.
2. While in the Control Panel, see if you have an icon labeled Tweak UI. If
so, double-click it, find the tab that says Paranoia, and make sure the option
Clear Last User at logon is not checked. Click OK.
3. Back in the Control Panel, double-click the icon labeled Network and
make sure you have Client for Microsoft Networks as the first item listed.
If Microsoft Family Logon or Client for NetWare Networks is listed (or
both), click on them once and then click the Remove button.
4. Under Primary Network Logon, select Windows Logon.

5. Double-click Client for Microsoft Networks and ensure Log on to

Windows NT domain is not checked. While in that window, ensure
that Quick logon is selected, and then click OK.
6. Click the Access Control tab at the top of the window and make sure the
option Share-level access control is selected. Then click OK.
 APPENDIX D: Windows 98/Me Help! 215

7. If you are asked to reboot, click No.

8. Close the Control Panel.

9. Click Start, click Programs, click Accessories, click Communications,

and click Dial-up Networking. You should see the icon used to dial your
ISP here. Right-click it and select Properties.
10. Click the Networking tab at the top of the window.

11. The only item that should be selected is Enable software compression.
Make sure that Log on to network (if available) and all of the other options
are not enabled. Below that, it says Allowed network protocols. Ensure
that the last option, TCP/IP, is the only item selected. Then click OK.
12. Close any open windows.

13. Click Start, click Run, type command, and click OK.

14. Type CD \Windows, and press the ENTER key on your keyboard.

15. Type del *.pwl and press the ENTER key on your keyboard.

16. Type exit and press the ENTER key on your keyboard.

17. Click Start, click Run, type regedit, and click OK.

18. Click the + symbol next to HKEY_LOCAL_MACHINE.

19. Click the + symbol next to Software.

20. Click the + symbol next to Microsoft.

21. Click the + symbol next to Windows.

22. Click the + symbol next to CurrentVersion.

23. Click the + symbol next to Network.

24. Click the yellow folder next to Real Mode Net.

25. If you see a value named AutoLogon, click it and press the DELETE key on
your keyboard. Once you have deleted it, close the window. (For more details
on the AutoLogon procedure, visit www.wown.com/j_helmig/nologon
.htm#AutoLogon.)
26. Click Start, click Shutdown, and choose Restart.
216 The Healthy PC

27. When Windows comes back up, a login screen should be displayed. For the
name, type any name you like. Do not enter any text into the password line.
Press the ENTER key on your keyboard.
28. If Windows asks for password verification, press the ENTER key again.

That’s it—you’re finished! The next time you restart Windows, the logon
screen should not come up, and when you dial your ISP, the option to save your
password should be enabled.
 Appendix E
Windows XP Help!
218 The Healthy PC

T his appendix contains a brief compilation of the most common Windows XP

(Home and Professional Editions) problems and their possible solutions.

Is there any way to force Outlook Express to minimize to the system tray?
Sure, just download and install this free utility atwww.r2.com.au/downloads/
index.html?id=hideoe.

I cannot open attachments in Outlook Express 6.

In Outlook Express, click Tools, click Options, and then click the Security
tab. Make sure Internet zone is selected. Also, make sure the option Do not allow
attachments to be saved or opened that could potentially be a virus is unchecked.
Click Apply, and then click OK.

When I click icons in the Control Panel, nothing happens, and when I press
CTRL-ALT-DEL, I get an error message.
Click Start, click Run, type sfc /scannow, and press ENTER. Once this
completes, reboot the computer. If sfc (sfc is short for system file checker)
discovers that a protected file has been overwritten, it retrieves the correct
version. Note that you may be prompted for the Windows XP or Windows XP
Service Pack 1 installation media during this process. More information can be
found at http://support.microsoft.com/?kbid=318378.

When I start Windows Update from Start menu, it says, “Windows Update
was disabled by your system administrator.”
Click Start, click Run, type gpedit.msc, and press ENTER. Double-click User
Configuration, double-click Administrative Templates, double-click Windows
Components, and then double-click Windows Update. In the pane on the right,
make sure the remove access to Windows Update policy is set to Disabled or
Not configured.

How can I get rid of the annoying Microsoft Messenger icon?

To disable or completely remove Windows Messenger, Microsoft MVP Doug
Knox created a small program you can download that will take care of this for
you with a simple click of the mouse. You can learn more about this program and
download it for free from www.dougknox.com/xp/utils/xp_mess_disable.htm.

I somehow lost the Welcome screen, and now my computer comes up in

classic logon.
In the Control Panel, select User Accounts. Then click Change the way users
log on or off and place a check in the box next to Use the Welcome screen. Finally,
click the Apply Options button and close the remaining window.
 APPENDIX E: Windows XP Help! 219

How can I disable “Out of hard drive space” error messages?

See this Microsoft Knowledge Base article at http://support.microsoft.com/
?kbid=285107.

In Windows Explorer, how can I stop the confirmations for file deletions?
Are you sure you want to do this? Just kidding! Right-click the Recycle Bin
and select Properties. Uncheck Display delete confirmation.

Whenever I select Open from the File menu to open a file (say, in Word or
Internet Explorer), all my files in any directory or folder are shown in wrong
alphabetical order.
See this Microsoft Knowledge Base article at http://support.microsoft.com/
?kbid=233526.

How do you turn on password caching (so the computer will automatically
remember your passwords) in Windows XP?
See this Microsoft Knowledge Base article at http://support.microsoft.com/
?kbid=235864.
This page intentionally left blank
 Appendix F
Useful and Safe Freeware
222 The Healthy PC

T here are numerous free utilities on the Internet, called freeware, that can help
you maintain your computer and make it easier to use. Table F-1 lists the utilities
I find to be the most useful. Use these utilities at your own risk and enjoyment.

In addition to these utilities, you may find the following free services useful:

■ For Internet speed tests, visit www.dslreports.com or www.speedguide.net.

You can use these web sites to determine how fast your Internet connection
really is.
■ Epinions, at www.epinions.com, is a web site you can use to share
information about your experiences with any product and read about
the experiences of other people.

Utility Description Available From

WinZip A great tool for compressing and www.winzip.com
uncompressing files
Magical Jelly Bean A utility to determine what serial www.magicaljellybean.com/keyfinder.shtml
Keyfinder number was used to install Windows
EndItAll A utility to close down all running www.pcmag.com/article2/0,4149,697,00.asp
programs; useful for Windows
95/98/Me users when attempting to use
Scandisk or defragment the hard disk
RegClean A utility designed by Microsoft to www.winguides.com/software/display.php/23
safely clean a Windows 95/98/Me
Registry
AVG Anti-Virus A free antivirus program www.grisoft.com
Zone Alarm A free firewall www.zonelabs.com
WinAmp A great music player that doesn’t use www.winamp.com
as many system resources as Windows
Media Player
AdAware A program designed to locate and www.lavasoftusa.com
remove spyware from your computer
SpyBot Search Another program designed to search for http://security.kolla.de
& Destroy and destroy spyware on your computer
BootVis A utility from Microsoft designed www.microsoft.com/whdc/hwdev/platform/
to speed up the boot process of performance/fastboot/bootvis.mspx
Windows XP
MyFonts Font A Windows font-management utility www.mytools.com
Manager

TABLE F-1 Free Utilities on the Internet

 APPENDIX F: Useful and Safe Freeware 223

Utility Description Available From

Tweak UI Utility for customizing Windows http://www.microsoft.com/ntworkstation/
(For Windows 98/Me) downloads/powertoys/networking/
nttweakui.asp
Microsoft Utility for customizing Windows XP http://www.microsoft.com/windowsxp/pro/
Power Toys for and adding additional features downloads/powertoys.asp
Windows XP
Tiny Firewall Another free firewall www.tinysoftware.com
Windows XP Steve Gibson’s great free utility http://grc.com/freepopular.htm
Security Utilities software to help secure your PC
IE Maximizer A program to ensure that your Internet http://www.jiisoft.com/iemaximizer
Explorer and Outlook Express always
open in a full screen

TABLE F-1 Free Utilities on the Internet (continued)

■ For recommendations of other useful freeware and shareware available on

the Internet, sign up for PC World’s free Daily Downloads newsletter at
http://www.pcworld.com/resource/newsletters.

Other newsletters from product reviews to up-to-the-minute PC industry

news can be selected here as well and you can unsubscribe from any of
them at any time with ease.
This page intentionally left blank
 Index
References to figures are in B how cookies work,
italics. backdoors, 88 56–57
backups, 152–154 session, 56
56k modems, 38–40 My Documents folder, terminology, 58
56k V.92 modems, 40 155–156 third-party, 57, 58–59
USB thumb drives, See also spyware
A 154–155 CPU
Active Desktop, 110 boot viruses, 26 speed, 160
disabling in Windows See also viruses upgrading, 164
98/Me, 110, 111 booting, 17 crashes, 30
disabling in Windows broadband cable connections Critical Update Notification, 34
XP, 111–112 determining connection See also updates
Ad-aware, 19–22 speed, 51
See also spyware tweaking Internet D
animations, 112 connection DDoS attacks, 88
disabling in Windows configurations, defragmenting your disk,
98/Me, 113–114 49–50 11–13
disabling in Windows bugs, 29 dial-up connections
XP, 116–117 burn-in, 148–149 56k, 38–40
Tweak UI, 114–115 bus mastering, 104 56k V.92, 40
antivirus software, 25–26, See also DMA mode determining connection
27, 28 speed, 47–49
See also viruses C See also modems
AOL capacitors, 173 direct memory access mode.
filtering email in, 80–81 leaking, 174–175 See DMA mode
high-speed Internet central processing unit. See Disk Cleanup, 6–7
access, 166 CPU disk defragmenter, 11–13
automatic restart, turning off connection speeds, 47–49, 51 distributed denial of service
in Windows XP, consumer-based routers, attacks. See DDoS attacks
137–139, 140 91, 204 DMA mode, 104–105
Automatic Updates, 34–36 cookies enabling in Windows
See also updates blocking, 58–59 98/Me, 105–108
AVG antivirus, 28 deleting, 59–60 enabling in Windows
first-party, 56 XP, 108–110

225
226 The Healthy PC

downloading, 61 removing from G

drivers, 175–179 Windows XP, Gibson, Steve, 94
drivers, 31, 175 100–102 glass monitors, 162–164
checking for new file infector viruses, 26 graphical user interface.
drivers, 177–179 See also viruses See GUI
checking your current file systems, 141–142 GUI, 18
drivers, 176–177 using NTFS in
DSL connections Windows XP,
determining connection 139–141
H
speed, 51 files hard disk drive, 4
tweaking Internet paging, 118 defragmenting, 11–13
connection swap, 118–123 scanning for errors,
configurations, temp, 4–7, 179–185 7–11
49–50 temporary Internet files, upgrading, 164–165
dust and debris, 172–173 5, 60–63 hardware firewalls, 90–92
filtering email, 79–80 HDD. See hard disk drive
heat, 144
E POPFile, 84–85
hoaxes, 74–75
email rules, 81
using AOL 8.0 Plus, how to tell a hoax from
filtering, 79–86 a legitimate message,
spam, 77–86 80–81
using Hotmail, 85 75–77
email hoaxes, 74–75 web sites, 75–76
how to tell a hoax from using Microsoft
Outlook or Outlook Hotmail, filtering email in, 85
a legitimate message,
75–77 Express, 81–85
web sites, 75–76 using NetZero, 85 I
End User License using Yahoo, 86 Instant Messaging, 204
Agreement, 17 firewalls Internet connections
errors defined, 89 checking configuration,
Scandisk, 7–11 enabling in Windows 49–50
turning off error XP, 92–94, 95 determining connection
reporting in features, 89 speed, 47–49, 51
Windows XP, hardware, 90–92 dial-up, 38–49
137–139, 140 Norton Internet upgrading, 165–166
EULA. See End User License Security, 89 Internet cookies
Agreement web sites, 95 blocking, 58–59
first-party cookies, 56 deleting, 59–60
flash drives, 154–155 how they work, 56–57
F terminology, 58
flash memory, 154
fake user interface. See FUI third-party cookies, 57,
fonts
fans, 144, 173 58–59
deleting, 118
FAQs and web site
management
Windows 98/Me, advertisements, 57
software, 118
212–216 See also spyware
number that can be
Windows XP, 218–219 Internet pop-ups, 64
installed, 117
FAT, 141–142 preventing, 64–69
freeware, 222–223
File Allocation Table. See FAT Windows Messenger,
frequently asked questions.
File and Printer Sharing 69–71
See FAQs
removing from
FUI, 18
Windows 98/Me,
See also spyware
100, 101
 Index 227

J checking the modem patches, 30

JavaScript, 64 type on Windows See also updates
disabling, 64–66 98/Me, 40–42 payloads, 24–25
junk email. See spam checking the modem PC user groups, 200–201
type on Windows XP, physical errors, 7
43–44 pirating, 61
L determining connection polymorphic viruses, 26
last-known good Windows speed, 47–49 See also viruses
configuration, 188 upgrading, 44 POPFile, 84–85
LCD monitors, 163–164 monitors pop-unders, 64
limitations of proprietary LCD vs. glass, 163–164 pop-ups, 64
computers, 166 viewable area, 162–163 preventing, 64–69
logical errors, 7 motherboards, 175 Windows Messenger,
MSCONFIG, 131–133 69–71
M starting Windows in ports, 90–91
macro viruses, 26 Safe Mode, 191–195 USB, 151–152
See also viruses multipartite viruses, 26 power settings
maintenance See also viruses for desktop computers,
cleaning out dust and multitasking, 208 145–147
debris, 172–173 mutation viruses, 26 for laptops, 147–148
downloading drivers, See also viruses power users, 208
175–179 My Documents folder, print servers, 91
ensuring fans are 155–156 proprietary computers,
operating, 173 MyFonts, 118 limitations of, 166
verifying that
capacitors are not N Q
leaking, 174–175 networking, 204–205 QoS Packet Scheduler,
McAfee VirusScan, 28 NetZero, filtering email in, 85 removing from Windows
memory New Technology File System. XP, 100–102
adding RAM, 159–162 See NTFS
flash memory, 154
shared memory, 166
newsgroups, 201 R
and spam, 78 RAM
Microsoft Outlook, filtering Norton AntiVirus, 28
email in, 81–85 compatibility with your
NTFS, using in Windows XP, system, 161
Microsoft Plus! Pack 139–141
screensavers, 150 determining how much
modems you need, 159, 160
56k, 38–40
O plugging in, 161–162
56k V.92, 40 operating systems, Windows 98/Me use of,
adjusting modem upgrading, 158 159
settings on Windows Outlook Express, filtering random access memory.
98/Me, 45–46 email in, 81–85 See RAM
adjusting modem rebooting, 145
settings on Windows P Recycle Bin, emptying, 4
XP, 46–47 paging files, 118 Registry cleaner software, 195
See also swap files replacing your computer,
partitioning, 142 166–167
228 The Healthy PC

Resource Meter, 208 freeware, 16, 222–223 PC user groups,

restore points, 188–189 installing, 61 200–201
retail software, 16 removing unnecessary web sites, 200
routers, 90–91 software, 128–129 temp files
consumer-based, 91, retail, 16 deleting, 4–7
204 shareware, 16 deleting in Windows
setting up, 92, 93 spyware, 16–24 98, 183–185
wireless, 91, 92 spam deleting in Windows
rules, 81 defined, 77 Me, 182–183
See also filtering email filtering, 79–86 deleting in Windows
how spammers get your XP, 179–181
S address, 77–79 temporary Internet files, 5,
Safe Mode, 191 why it's called spam, 78 60–62
starting Windows Spybot Search & Destroy, controlling with
98/Me in, 191–193 22–24 Internet Explorer, 62
starting Windows XP See also spyware optimizing storage
in, 193–195 spyware settings, 63
satellite connections Ad-aware, 19–22 third-party cookies, 57
determining connection defined, 16–17 blocking, 58–59
speed, 51 locating and removing, thumb drives, 154–155
tweaking Internet 19–24 Trojans, 25
connection the problem with, See also antivirus
configurations, 17–18 software; viruses
49–50 Spybot Search & trusted sites
Scandisk Destroy, 22–24 adding web sites to list
reading the report, 9–11 startup, disabling unnecessary of, 66–68
running with Windows programs, 131–133 removing web sites
98/Me, 7–8 surge suppressors, 151 from list of, 68–69
running with Windows swap files, 118 turning PCs off, 144–145
XP, 8–9 configuring in Windows Tweak Tester II, 49–50
screensavers, 148–149 98/Me, 120–123, 124 Tweak UI, 114–115
Microsoft Plus! how swapping
Pack, 150 works, 118 U
script viruses, 26 misconceptions, uninstall software, 195
See also viruses 119–120 Uninterruptible Power
servers, print, 91 resizing, 120 Supplies. See UPS
service packs, 30 switches, 90–91 Universal Plug and Play, 96
See also updates system resources, 208–209 disabling in Windows
session cookies, 56 checking, 129–131 Me, 96–97
shared memory, 166 System Restore, 188–189 disabling in Windows
shareware, 16 using in Windows XP, 98–99
ShieldsUP!, 95 Me/XP, 189–190 unnecessary animations, 112
shutting down, 144–145 disabling in Windows
software T 98/Me, 113–114
antivirus, 25–26 technical support disabling in Windows
to avoid, 195 newsgroups, 201 XP, 116–117
font-management, 118 Tweak UI, 114–115
 Index 229

unnecessary services, See also antivirus removing File and

disabling in Windows XP, software Printer Sharing,
134–137 vulnerabilities 100, 101
unnecessary software, checking for, 94–95 running Scandisk, 7–8
removing, 128–129 See also firewalls starting in Safe Mode,
updates, 30 191–193
Automatic Updates, W Tweak UI, 114–115
35–36 W32 viruses, 26 upgrading, 158
critical, 33–36 See also viruses Windows Me
types of, 30–31 web sites adjusting modem
using the Windows adding to the trusted settings, 45–46
Update web site, sites list, 66–68 Automatic Updates,
31–33 email hoaxes, 75–76 34–35, 36
upgrading firewalls, 95 checking system
CPU, 164 freeware, 222–223 resources, 129–131
hard disk drive, networking, 204–205 checking the modem
164–165 removing from trusted type, 40–42
Internet connections, sites list, 68–69 common problems and
165–166 system resources, 209 solutions, 212–216
monitors, 162–164 technical support, 200 configuring swap files,
operating systems, 158 video card 120–123, 124
UPnP. See Universal Plug manufacturers, deleting temp files,
and Play 177–178 182–183
UPS, 136, 149–151 www.SpeedGuide disabling Active
continuous, 150 .net, 50 Desktop, 110, 111
standby, 150 wildcards, 68 disabling Universal
USB ports, 151–152 Windows 98 Plug and Play, 96–97
USB thumb drives, 154–155 adjusting modem disabling unnecessary
users settings, 45–46 animations, 113–114
power users, 208 checking system enabling DMA mode,
user groups, 200–201 resources, 129–131 105–108
checking the modem removing File and
V type, 40–42 Printer Sharing,
viruses, 24–25 common problems and 100, 101
boot, 26 solutions, 212–216 running Scandisk, 7–8
file infector, 26 configuring swap files, starting in Safe Mode,
macro, 26 120–123, 124 191–193
multipartite, 26 Critical Update System Restore,
mutation, 26 Notification, 34 189–190
polymorphic, 26 deleting temp files, Tweak UI, 114–115
protecting yourself 183–185 upgrading, 158
from, 27–28 disabling Active Windows Messenger, pop-ups,
script, 26 Desktop, 110, 111 69–71
Trojans, 25 disabling unnecessary Windows updates
W32, 26 animations, 113–114 Automatic Updates,
why they are created, 27 enabling DMA mode, 35–36
worms, 25–26 105–108 critical updates, 33–36
types of updates, 30–31
230 The Healthy PC

using the Windows disabling unnecessary System Restore,

Update web site, services, 134–137 189–190
31–33 Disk Cleanup, 6–7 turning off error
Windows XP enabling DMA mode, reporting and
adjusting modem 108–110 automatic restart,
settings, 46–47 enabling the firewall, 137–139, 140
Automatic Updates, 92–94, 95 upgrading to, 158
35–36 preventing Windows using NTFS, 139–141
checking the modem Messenger pop-ups, wireless routers, 91, 92
type, 43–44 69–71 worms, 25–26
common problems and removing unnecessary See also antivirus
solutions, 218–219 basic services, software; viruses
deleting temp files, 100–102
179–181 running Scandisk, 8–9 Y
disabling Active services and Y2K bug, 29
Desktop, 111–112 recommended Yahoo, filtering email in, 85
disabling Universal settings, 134–136
Plug and Play, 98–99 starting in Safe Mode,
disabling unnecessary 193–195
animations, 116–117
INTERNATIONAL CONTACT INFORMATION
AUSTRALIA SOUTH AFRICA
McGraw-Hill Book Company McGraw-Hill South Africa
Australia Pty. Ltd. TEL +27-11-622-7512
TEL +61-2-9900-1800 FAX +27-11-622-9045
FAX +61-2-9878-8881 [email protected]
http://www.mcgraw-hill.com.au
[email protected] SPAIN
McGraw-Hill/
CANADA Interamericana de España, S.A.U.
McGraw-Hill Ryerson Ltd. TEL +34-91-180-3000
TEL +905-430-5000 FAX +34-91-372-8513
FAX +905-430-5020 http://www.mcgraw-hill.es
http://www.mcgraw-hill.ca [email protected]

GREECE, MIDDLE EAST, & AFRICA UNITED KINGDOM, NORTHERN,

(Excluding South Africa) EASTERN, & CENTRAL EUROPE
McGraw-Hill Hellas McGraw-Hill Education Europe
TEL +30-210-6560-990 TEL +44-1-628-502500
TEL +30-210-6560-993 FAX +44-1-628-770224
TEL +30-210-6560-994 http://www.mcgraw-hill.co.uk
FAX +30-210-6545-525 [email protected]

MEXICO (Also serving Latin America) ALL OTHER INQUIRIES Contact:

McGraw-Hill Interamericana Editores McGraw-Hill/Osborne
S.A. de C.V. TEL +1-510-420-7700
TEL +525-1500-5108 FAX +1-510-420-7703
FAX +525-117-1589 http://www.osborne.com
http://www.mcgraw-hill.com.mx [email protected]
[email protected]

SINGAPORE (Serving Asia)

McGraw-Hill Book Company
TEL +65-6863-1580
FAX +65-6862-3354
http://www.mcgraw-hill.com.sg
[email protected]