data sheet

Elcometer 415 Paint & Powder Coating Thickness Gauge

This easy to use, low cost gauge provides a Coating Thickness

simple, accurate and reliable way to measure Gauges
coatings on all smooth ferrous and non-ferrous Coating thickness gauges
metal surfaces. are used for the
measurement of coatings
This gauge with it’s intuitive menu allows you to on all metal surfaces.
Digital coating gauges are
use it straight out of the box.
more accurate, more
repeatable and more
reproducible than any
Fast and accurate reading rate: other coating thickness
Greater than 60 readings per minute. gauges available on the
market today.
Large, easy to read display: Mechanical coating
The angled, ‘enlarged’ display is ideal for gauges are the ideal
viewing from all angles. choice when coating
Simple ‘zero cal’ feature: thickness needs to be
measured in areas where
Complete with factory calibration reset if no
Elcometer 415 Coating Thickness Gauge batteries cannot be used
access to the uncoated substrate.
or are difficult to obtain.
Auto switches to Ferrous or Non-Ferrous: For example in remote
Ideal for measuring paint or powder on both locations, underwater,
At a glance: where dangerous gasses
steel and aluminium sufaces.
Fast, repeatable & accurate are present, you are
Metric or Imperial measurements: looking for a basic coating
Large screen display thickness gauge to
Readings can be displayed in microns or mils.
Auto switches between measure coatings on
Bigfoot™ probe for repeatable results: ferrous substrates.
Steel (F) or Aluminium (NF)
substrates Integral probe with V-groove allows accurate
measurement on smooth, flat or curved Elcometer offer the most
Central Bigfoot™ probe for surfaces. comprehensive range of
repeatable results
Ergonomic design for maximum comfort: both digital and
On-screen instructions Easy to hold gauge allows for regular daily use. mechanical coating
thickness gauges to meet
Rugged & reliable design
On-screen instructions: all you requirements.
The User is guided through the functions of the
gauge - in over 20 languages.
Rugged & Reliable:
Built from ABS plastic, this durable gauge is
ideal for the paint & powder coating
Can be used in accordance with:
environment.
BS 5411 (11) (3) BS 3900 (C5)
BS 5599 BS EN ISO 1461
ISO 2178 ISO 2360
ISO 2808 ISO 19840
DIN 50981 DIN 50984
ASTM B 244 ASTM B 499
ASTM D 1400 ASTM D 1186
SSPC-PA2 2004

www.elcometer.com Elcometer Coating Thickness Gauge

Version 1:12/04/06
1/2
data sheet

Range 0 to 1000µm (0 to 40 mils) ENGLAND

Elcometer Instruments Ltd
Accuracy ±3% or ±3µm (±0.12 mils) Edge Lane
Resolution 1µm (0.1 mils) Manchester M43 6BU

Measurement speed Greater than 60 readings per minute Tel: +44 (0)161 371 6000
Fax: +44 (0)161 371 6010
Weight 130g (4.1oz) e-mail: [email protected]
www.elcometer.com
Dimensions 110 x 75 x 35mm (4.3 x 3 x 1.38”)
Operating temperature USA
0° to 50°C (32° to 120°F) Elcometer Inc
(ambient) 1893 Rochester Industrial Drive
Maximum Operating Rochester Hills Michigan 48309
80°C (176°F)
temperature (probe)
Tel: +1 248 650 0500
Storage temperature -10° to 55°C (14° to 130°F) Toll Free: 800 521 0635
Fax: +1 248 650 0501
Case High impact ABS Plastic e-mail: [email protected]
2 x LR03 (AAA) alkaline dry batteries or www.elcometer.com
Batteries
rechargeable equivalents (supplied) CANADA
Elcometer 415 gauge, 4 x calibration foils, Elcometer Ltd
Packing list soft carry case, batteries and operating PO Box 622, 401 Ouelette Avenue
Windsor, Ontario N9A 6N4
instructions
Tel: +1 248 650 0500
Part number A415FNFI1 Toll Free: 800 521 0635
Fax: +1 248 650 0501
e-mail: [email protected]
www.elcometer.com
Related Products
ASIA & THE FAR EAST
Elcometer (Asia) Pte Ltd
Ideal for both smooth and rough blast profiled and 896 Dunearn Rd
Sime Darby Centre #3-09
surfaces, the Elcometer 456 has multiple Singapore 589472,
calibration options for accurate, repeatable Republic of Singapore
readings.
Tel: +65 6462 2822
With its large, backlit screen the Elcometer 456 Fax: +65 6462 2860
range clearly displays the readings and statistics e-mail: [email protected]
www.elcometer.com
instantaneously. All menus are available in
multiple languages and selected by the User. BELGIUM
Elcometer SPRL
The memory can store up to 40,000 readings in Rue Vallée 13
999 batches. Readings can be directly outputted B-4681 Hermalle /s Argenteau
Elcometer 456 to either a printer or to a PC, making the
production of reports quick and easy. Tel: +32 (0)4 379 96 10
Fax: +32 (0)4 374 06 03
The Elcometer 456 remains one of the most e-mail: [email protected]
www.elcometer.be
advanced hand held coating thickness gauge on
the market today and is available with either FRANCE
Integral probes (built in) or an extensive range of Elcometer SARL
separate plug in probes. 97 Route de Chécy
45430 BOU

Tel: +33 (0)2 38 86 33 44

Coating thickness is one of the key Fax: +33 (0)2 38 91 37 66
measurements required in the quality control of e-mail: [email protected]
www.elcometer.fr
paint or powder coatings.
Elcometer has a wide range of products available GERMANY
Elcometer Instruments GmbH
across the complete coating process – from Himmlingstraβe 18
coatings development through to final inspection. D-73434 Aalen
The Elcometer Catalogue
For further information contact Elcometer or visit Tel: +49 (0)7366 91 92 83
www.elcometer.com to order a complete product Fax: +49 (0)7366 91 92 86
catalogue. e-mail: [email protected]
www.elcometer.de

www.elcometer.com Elcometer Coating Thickness Gauge

Version 1:12/04/06
2/2