Scribd
Upload
635 views3 pages

Base Plate (Template)

1) The document provides design details for a base plate to support a W14x193 column transmitting factored loads of 2 kips (Hx) and 3 kips (Hy). 2) Key dimensions of the base plate are determined to be 28 inches for both length and width, with a thickness of 1.5 inches. Four 5/8-inch diameter anchor bolts spaced at least 6 inches from edges are selected. 3) Shear lugs measuring 28 inches long, 2.5 inches high, and 1/4 inch thick are designed to resist the 3 kip Hy load using fillet welds between the lugs and base plate.

Uploaded by

li yongzhong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
635 views3 pages

Base Plate (Template)

1) The document provides design details for a base plate to support a W14x193 column transmitting factored loads of 2 kips (Hx) and 3 kips (Hy). 2) Key dimensions of the base plate are determined to be 28 inches for both length and width, with a thickness of 1.5 inches. Four 5/8-inch diameter anchor bolts spaced at least 6 inches from edges are selected. 3) Shear lugs measuring 28 inches long, 2.5 inches high, and 1/4 inch thick are designed to resist the 3 kip Hy load using fillet welds between the lugs and base plate.

Uploaded by

li yongzhong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

BASE PLATE DESIGN

Job Name: CAL Design: B. LI


Job Number: 03-48-3521 Checker: Page 1 of 2
Gridline C1 @ Gridline 1

Factored Horizontal load Hx= 2 kips Hy= 3 kips


Factored axial force Pu= 476 kips, Factored uplift force UP= 45 kips
Resistance factor of steel F= 0.9 , Resistance factor of conc. Fc= 0.65
Factor of anchor tension Fb= 0.75 ,
Base plate yield stress Fy= 50 ksi, Concrete strength f'c= 4 ksi
Column: W14x193 d= 15.5 in,
bf= 15.7 in
Achor rod grade F1554- G55 Fut= 75 kips
Achor rod number 4 Column to plate edge Min= 6 in
Required base plate area
A1=Pu/(Fc0.85f'c)= 215 in2
Base plate length Base plate width
N=A1^0.5+(0.95d-0.8bf)/2= 27.0 in, B=A1/N= 27.0 in,
Used base plate length: N= 28 in Used base plate width: B= 28 in
Base Plate Area A1= 784 in 2

Pp=F0.85f'cA1= 2666 kips


m=(N-0.95d)/2= 6.6 in,
n=(B-0.8bf)/2= 7.7 in
X=4dbfPu/((d+bf)^2*FcPp)= 0.2
l=2X^0.5/(1+(1-X)^0.5)= 0.5
ln'=l(dbf)^0.5/4= 1.8 in
l=max(m,n,ln')= 7.7 in
Required base plate thk.
tmin= l(2Pu/(FFyBN))^0.5= 1.3 in,
Used base plate thickness.: tp= 1 1/2 in

Factored uplift per anchor Pup= 11 kips


Required anchor effective area
Ab=Pup/(FFut)= 0.20 in2 Anchor dia.: do= 5/8 in
Effective area: Ab= 0.23 in
2
Anchor Tension Stength: FRn= 13 kips
>11 kips, OK

Heavy hex head nut flat width F= 1 in Pullout strength: FNp= 22.246 kips
Abrg= 0.671 in2 >11 kips, OK
Used anchor to carry horizontal load
Try: do= 1 in Factored Horiz. Load: H= 3 kips
ft= 18.6 ksi fv= 1.24 ksi
FF'nt=F(1.3Fnt-Fntfv/(FFnv))= 56.3 ksi >18.56 ksi, OK
Used anchor dia.: do= 1 in
BASE PLATE DESIGN

Job Name: CAL Design: B. LI 4/11/2019


Job Number: 03-48-3521 Checker: 0 Page 2 of 2
Gridline C1 @ Gridline 1

Concrete pier size N1= 28 in,


B1= 28 in,
Grout bed G= 2 in
Shear lug yield stress Fy= 50 ksi

X-X shear lug for Hy Hy= 3 kips


Required shear lug area
Ay=Hy/(0.8f'c)= 1 in2
Used shear lug length Ls= 28 in
Required embedded depth
d=Ay/Ls= 0.03 in Used embeded depth: d= 1/2 in
Assuming lug thk. ts= 3/4 in, Shear lug height: hs= 2 1/2 in
Projected area of shear in pier
Av=(d+(N1-ts)/2)*B1-d*Ls= 382 in2 E70 Fillet welds FW= 31.5 ksi
Shear capacity of concrete in front of lug (F=0.75) Used Throat thickness tw= 1/4 in
Vu= 4Ff'c^0.5Av= 72.4 kips s=ts+2(tw/3)= 0.42 in
>3 kips, OK fc=Ml/(sLs)= 0.58 kips/in
Factored moment in lug fv=Hy/(sLs)= 0.05 kips/in
Ml=Hy(G+d/2)= 6.75 kip-in Required strength
Required lug thk. fr=(fc^2+fv^2)^0.5= 0.58 kips/in
ts=sqrt(4Ml/(FFyls))= 0.15 in, Weld strength
Used shear lug thickness: ts= 1/4 in Fr=0.707twFw= 5.56 kips/in
>0.58 kips/in, OK

You might also like